Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
	<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
	<bsz@semihalf.com>, <rydberg@bitmath.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
	<jiada_wang@mentor.com>
Subject: [PATCH v8 17/52] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs
Date: Thu, 19 Mar 2020 07:59:41 -0700
Message-ID: <20200319150016.61398-18-jiada_wang@mentor.com> (raw)
In-Reply-To: <20200319150016.61398-1-jiada_wang@mentor.com>

From: Nick Dyer <nick.dyer@itdev.co.uk>

There may be multiple maXTouch chips on a single device which will require
different configuration files. Add a platform data value for the
configuration filename.

Add sysfs entry to write configuration file if the platform data is not
set.

Split out the object initialisation code from mxt_initialize() into
mxt_configure_objects() to allow this.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 71a2a4d1954460b949a16b607f72bafab294ca79)
[gdavis: Resolve forward port conflicts due to applying upstream
	 commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
	 data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fix from Vladimir Zapolskiy:
	 - Input: atmel_mxt_ts - fix error paths in mxt_configure_objects()]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
[jiada: Separate Documentation/ portion change to another commit
	Change Symbolic permissions 'S_IWUSR' to 0200]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 109 +++++++++++++++++++----
 1 file changed, 94 insertions(+), 15 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 0e30ff372a43..3ef98e14c94e 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -34,7 +34,6 @@
 #include <dt-bindings/input/atmel_mxt_ts.h>
 
 /* Configuration file */
-#define MXT_CFG_NAME		"maxtouch.cfg"
 #define MXT_CFG_MAGIC		"OBP_RAW V1"
 
 /* Registers */
@@ -335,6 +334,8 @@ struct mxt_data {
 	struct regulator *reg_vdd;
 	struct regulator *reg_avdd;
 	char *fw_name;
+	char *cfg_name;
+	const char *pcfg_name;
 
 	/* Cached parameters from object table */
 	u16 T5_address;
@@ -377,6 +378,9 @@ struct mxt_data {
 
 	/* Indicates whether device is in suspend */
 	bool suspended;
+
+	/* Indicates whether device is updating configuration */
+	bool updating_config;
 };
 
 struct mxt_vb2_buffer {
@@ -833,9 +837,11 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
 
 static void mxt_input_sync(struct mxt_data *data)
 {
-	input_mt_report_pointer_emulation(data->input_dev,
-					  data->t19_num_keys);
-	input_sync(data->input_dev);
+	if (data->input_dev) {
+		input_mt_report_pointer_emulation(data->input_dev,
+						  data->t19_num_keys);
+		input_sync(data->input_dev);
+	}
 }
 
 static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
@@ -2578,13 +2584,21 @@ static int mxt_initialize(struct mxt_data *data)
 	if (error)
 		return error;
 
-	error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
-					&client->dev, GFP_KERNEL, data,
-					mxt_config_cb);
-	if (error) {
-		dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
-			error);
-		goto err_free_sysfs;
+	if (data->cfg_name) {
+		error = request_firmware_nowait(THIS_MODULE, true,
+						data->cfg_name,
+						&client->dev,
+						GFP_KERNEL, data,
+						mxt_config_cb);
+		if (error) {
+			dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+				error);
+			goto err_free_sysfs;
+		}
+	} else {
+		error = mxt_configure_objects(data, NULL);
+		if (error)
+			goto err_free_sysfs;
 	}
 
 	return 0;
@@ -3081,19 +3095,21 @@ static int mxt_configure_objects(struct mxt_data *data,
 	error = mxt_init_t7_power_cfg(data);
 	if (error) {
 		dev_err(dev, "Failed to initialize power cfg\n");
-		return error;
+		goto err_free_object_table;
 	}
 
 	if (cfg) {
 		error = mxt_update_cfg(data, cfg);
-		if (error)
+		if (error) {
 			dev_warn(dev, "Error %d updating config\n", error);
+			goto err_free_object_table;
+		}
 	}
 
 	if (data->multitouch) {
 		error = mxt_initialize_input_device(data);
 		if (error)
-			return error;
+			goto err_free_object_table;
 	} else {
 		dev_warn(dev, "No touch object detected\n");
 	}
@@ -3101,6 +3117,10 @@ static int mxt_configure_objects(struct mxt_data *data,
 	mxt_debug_init(data);
 
 	return 0;
+
+err_free_object_table:
+	mxt_free_object_table(data);
+	return error;
 }
 
 /* Firmware Version is returned as Major.Minor.Build */
@@ -3392,6 +3412,55 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	return count;
 }
 
+static ssize_t mxt_update_cfg_store(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	const struct firmware *cfg;
+	int ret;
+
+	ret = mxt_update_file_name(dev, &data->cfg_name, buf, count);
+	if (ret)
+		return ret;
+
+	ret = request_firmware(&cfg, data->cfg_name, dev);
+	if (ret < 0) {
+		dev_err(dev, "Failure to request config file %s\n",
+			data->cfg_name);
+		ret = -ENOENT;
+		goto out;
+	}
+
+	data->updating_config = true;
+
+	mxt_free_input_device(data);
+
+	if (data->suspended) {
+		if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+			enable_irq(data->irq);
+			mxt_regulator_enable(data);
+		} else if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP) {
+			mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+			mxt_acquire_irq(data);
+		}
+
+		data->suspended = false;
+	}
+
+	ret = mxt_configure_objects(data, cfg);
+	if (ret)
+		goto release;
+
+	ret = count;
+
+release:
+	release_firmware(cfg);
+out:
+	data->updating_config = false;
+	return ret;
+}
+
 static DEVICE_ATTR(update_fw, 0200, NULL, mxt_update_fw_store);
 
 static struct attribute *mxt_fw_attrs[] = {
@@ -3406,11 +3475,13 @@ static const struct attribute_group mxt_fw_attr_group = {
 static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
 static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
 static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_cfg, 0200, NULL, mxt_update_cfg_store);
 
 static struct attribute *mxt_attrs[] = {
 	&dev_attr_fw_version.attr,
 	&dev_attr_hw_version.attr,
 	&dev_attr_object.attr,
+	&dev_attr_update_cfg.attr,
 	NULL
 };
 
@@ -3511,7 +3582,7 @@ static int mxt_stop(struct mxt_data *data)
 {
 	int ret;
 
-	if (data->suspended || data->in_bootloader)
+	if (data->suspended || data->in_bootloader || data->updating_config)
 		return 0;
 
 	switch (data->suspend_mode) {
@@ -3580,6 +3651,8 @@ static int mxt_parse_device_properties(struct mxt_data *data)
 	int n_keys;
 	int error;
 
+	device_property_read_string(dev, "atmel,cfg_name", &data->pcfg_name);
+
 	if (device_property_present(dev, keymap_property)) {
 		n_keys = device_property_count_u32(dev, keymap_property);
 		if (n_keys <= 0) {
@@ -3705,6 +3778,12 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (error)
 		return error;
 
+	if (data->pcfg_name)
+		mxt_update_file_name(&data->client->dev,
+				     &data->cfg_name,
+				     data->pcfg_name,
+				     strlen(data->pcfg_name));
+
 	data->reset_gpio = devm_gpiod_get_optional(&client->dev,
 						   "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(data->reset_gpio)) {
-- 
2.17.1


  parent reply index

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-19 14:59 [PATCH v8 00/52] atmel_mxt_ts misc Jiada Wang
2020-03-19 14:59 ` [PATCH v8 01/52] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-19 14:59 ` [PATCH v8 02/52] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-19 14:59 ` [PATCH v8 03/52] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-19 14:59 ` [PATCH v8 04/52] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-19 14:59 ` [PATCH v8 05/52] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-19 14:59 ` [PATCH v8 06/52] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-03-19 14:59 ` [PATCH v8 07/52] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 08/52] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 09/52] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-19 14:59 ` [PATCH v8 10/52] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-19 14:59 ` [PATCH v8 11/52] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-19 14:59 ` [PATCH v8 12/52] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-19 14:59 ` [PATCH v8 13/52] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 14/52] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-03-19 14:59 ` [PATCH v8 15/52] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-19 14:59 ` [PATCH v8 16/52] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-19 14:59 ` Jiada Wang [this message]
2020-03-19 14:59 ` [PATCH v8 18/52] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-19 14:59 ` [PATCH v8 19/52] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-19 14:59 ` [PATCH v8 20/52] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-19 14:59 ` [PATCH v8 21/52] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-19 14:59 ` [PATCH v8 22/52] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-19 14:59 ` [PATCH v8 23/52] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-03-19 14:59 ` [PATCH v8 24/52] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-19 14:59 ` [PATCH v8 25/52] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-19 14:59 ` [PATCH v8 26/52] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-19 14:59 ` [PATCH v8 27/52] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-19 14:59 ` [PATCH v8 28/52] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-03-19 14:59 ` [PATCH v8 29/52] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-19 14:59 ` [PATCH v8 30/52] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-19 14:59 ` [PATCH v8 31/52] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-19 14:59 ` [PATCH v8 32/52] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-19 14:59 ` [PATCH v8 33/52] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-19 14:59 ` [PATCH v8 34/52] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-19 14:59 ` [PATCH v8 35/52] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-19 15:00 ` [PATCH v8 36/52] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-19 15:00 ` [PATCH v8 37/52] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-19 15:00 ` [PATCH v8 38/52] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-19 15:00 ` [PATCH v8 39/52] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-19 15:00 ` [PATCH v8 40/52] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-03-19 15:00 ` [PATCH v8 41/52] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 42/52] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 43/52] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 44/52] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 45/52] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-19 15:00 ` [PATCH v8 46/52] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-19 15:00 ` [PATCH v8 47/52] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-19 15:00 ` [PATCH v8 48/52] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-19 15:00 ` [PATCH v8 49/52] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-03-19 15:00 ` [PATCH v8 50/52] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-19 15:00 ` [PATCH v8 51/52] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-03-19 15:00 ` [PATCH v8 52/52] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200319150016.61398-18-jiada_wang@mentor.com \
    --to=jiada_wang@mentor.com \
    --cc=Andrew_Gabbasov@mentor.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=bsz@semihalf.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=erosca@de.adit-jv.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nick@shmanahar.org \
    --cc=rydberg@bitmath.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git