From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
<bsz@semihalf.com>, <rydberg@bitmath.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
<jiada_wang@mentor.com>
Subject: [PATCH v9 13/55] Input: atmel_mxt_ts - add regulator control support
Date: Wed, 25 Mar 2020 06:32:52 -0700 [thread overview]
Message-ID: <20200325133334.19346-14-jiada_wang@mentor.com> (raw)
In-Reply-To: <20200325133334.19346-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Allow the driver to optionally manage enabling/disable power to the touch
controller itself. If the regulators are not present then use the deep
sleep power mode instead.
For a correct power on sequence, it is required that we have control over
the RESET line.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 14052b61bb66c2f2283c00e733e131be7a9b8bfc)
[gdavis: Resolve forward port conflicts due to v4.14-rc1 commmit
f657b00df22e ("Input: atmel_mxt_ts - add support for reset
line") and applying upstream commit 96a938aa214e ("Input:
atmel_mxt_ts - remove platform data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fixes from Dirk Behme:
- Input: atmel_mxt_ts - in failure case disable the regulator
- Input: atmel_mxt_ts - disable only enabled regulators
- Input: atmel_mxt_ts - use devm_regulator_get()]
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
[jiada: Replace white-spaces with tab for MXT_CHG_DELAY
separate Documentation/ and include/dt-bindings/ portion change to another commit]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 130 +++++++++++++++++++++--
1 file changed, 121 insertions(+), 9 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 9aafed92db9c..ef8baf64659e 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -26,10 +26,12 @@
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-vmalloc.h>
+#include <dt-bindings/input/atmel_mxt_ts.h>
/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
@@ -215,6 +217,9 @@ enum t100_type {
#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
+#define MXT_REGULATOR_DELAY 150 /* msec */
+#define MXT_CHG_DELAY 100 /* msec */
+#define MXT_POWERON_DELAY 150 /* msec */
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -275,11 +280,6 @@ enum v4l_dbg_inputs {
MXT_V4L_INPUT_MAX,
};
-enum mxt_suspend_mode {
- MXT_SUSPEND_DEEP_SLEEP = 0,
- MXT_SUSPEND_T9_CTRL = 1,
-};
-
/* Config update context */
struct mxt_cfg {
u8 *raw;
@@ -333,6 +333,8 @@ struct mxt_data {
u8 stylus_aux_pressure;
u8 stylus_aux_peak;
bool use_retrigen_workaround;
+ struct regulator *reg_vdd;
+ struct regulator *reg_avdd;
/* Cached parameters from object table */
u16 T5_address;
@@ -2073,6 +2075,94 @@ static int mxt_read_info_block(struct mxt_data *data)
return error;
}
+static void mxt_regulator_enable(struct mxt_data *data)
+{
+ int error;
+
+ if (!data->reg_vdd || !data->reg_avdd)
+ return;
+
+ gpiod_set_value(data->reset_gpio, 0);
+
+ error = regulator_enable(data->reg_vdd);
+ if (error)
+ return;
+
+ error = regulator_enable(data->reg_avdd);
+ if (error) {
+ regulator_disable(data->reg_vdd);
+ return;
+ }
+
+ /*
+ * According to maXTouch power sequencing specification, RESET line
+ * must be kept low until some time after regulators come up to
+ * voltage
+ */
+ msleep(MXT_REGULATOR_DELAY);
+ gpiod_set_value(data->reset_gpio, 1);
+ msleep(MXT_CHG_DELAY);
+
+retry_wait:
+ reinit_completion(&data->bl_completion);
+ data->in_bootloader = true;
+ error = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_POWERON_DELAY);
+ if (error == -EINTR)
+ goto retry_wait;
+
+ data->in_bootloader = false;
+}
+
+static void mxt_regulator_disable(struct mxt_data *data)
+{
+ if (!data->reg_vdd || !data->reg_avdd)
+ return;
+
+ if (regulator_is_enabled(data->reg_vdd))
+ regulator_disable(data->reg_vdd);
+ if (regulator_is_enabled(data->reg_avdd))
+ regulator_disable(data->reg_avdd);
+}
+
+static int mxt_probe_regulators(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int error;
+
+ /* Must have reset GPIO to use regulator support */
+ if (!data->reset_gpio) {
+ error = -EINVAL;
+ goto fail;
+ }
+
+ data->reg_vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(data->reg_vdd)) {
+ error = PTR_ERR(data->reg_vdd);
+ dev_err(dev, "Error %d getting vdd regulator\n", error);
+ goto fail;
+ }
+
+ data->reg_avdd = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(data->reg_avdd)) {
+ error = PTR_ERR(data->reg_avdd);
+ dev_err(dev, "Error %d getting avdd regulator\n", error);
+ goto fail_release;
+ }
+
+ mxt_regulator_enable(data);
+
+ dev_dbg(dev, "Initialised regulators\n");
+ return 0;
+
+fail_release:
+ regulator_put(data->reg_vdd);
+fail:
+ data->reg_vdd = NULL;
+ data->reg_avdd = NULL;
+ return error;
+}
+
static int mxt_read_t9_resolution(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -3139,7 +3229,12 @@ static int mxt_load_fw(struct device *dev, const char *fn)
goto release_firmware;
if (data->suspended) {
- enable_irq(data->irq);
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
+ mxt_regulator_enable(data);
+
+ if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP)
+ enable_irq(data->irq);
+
data->suspended = false;
}
@@ -3345,6 +3440,11 @@ static void mxt_start(struct mxt_data *data)
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
break;
+ case MXT_SUSPEND_REGULATOR:
+ enable_irq(data->irq);
+ mxt_regulator_enable(data);
+ break;
+
case MXT_SUSPEND_DEEP_SLEEP:
default:
/*
@@ -3377,6 +3477,12 @@ static void mxt_stop(struct mxt_data *data)
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
break;
+ case MXT_SUSPEND_REGULATOR:
+ disable_irq(data->irq);
+ mxt_regulator_disable(data);
+ mxt_reset_slots(data);
+ break;
+
case MXT_SUSPEND_DEEP_SLEEP:
default:
disable_irq(data->irq);
@@ -3469,6 +3575,8 @@ static int mxt_parse_device_properties(struct mxt_data *data)
data->t15_num_keys = n_keys;
}
+ device_property_read_u32(dev, "atmel,suspend-mode",
+ &data->suspend_mode);
return 0;
}
@@ -3555,14 +3663,18 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}
- disable_irq(client->irq);
-
- if (data->reset_gpio) {
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ error = mxt_probe_regulators(data);
+ if (error)
+ return error;
+ } else if (data->reset_gpio) {
msleep(MXT_RESET_GPIO_TIME);
gpiod_set_value(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
}
+ disable_irq(data->irq);
+
error = mxt_initialize(data);
if (error)
return error;
--
2.17.1
next prev parent reply other threads:[~2020-03-25 13:34 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 13:32 [PATCH v9 00/55] atmel_mxt_ts misc Jiada Wang
2020-03-25 13:32 ` [PATCH v9 01/55] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-25 13:32 ` [PATCH v9 02/55] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-25 13:32 ` [PATCH v9 03/55] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-25 13:32 ` [PATCH v9 04/55] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-25 13:32 ` [PATCH v9 05/55] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-25 13:32 ` [PATCH v9 06/55] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-03-25 13:32 ` [PATCH v9 07/55] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 08/55] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 09/55] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-25 13:32 ` [PATCH v9 10/55] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-25 13:32 ` [PATCH v9 11/55] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-25 13:32 ` [PATCH v9 12/55] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-25 13:32 ` Jiada Wang [this message]
2020-03-25 19:05 ` [PATCH v9 13/55] Input: atmel_mxt_ts - add regulator control support Dmitry Osipenko
2020-03-27 11:09 ` Wang, Jiada
2020-03-29 18:54 ` Dmitry Osipenko
2020-03-30 4:10 ` Wang, Jiada
2020-03-25 13:32 ` [PATCH v9 14/55] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 15/55] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-25 13:32 ` [PATCH v9 16/55] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-25 13:32 ` [PATCH v9 17/55] Input: atmel_mxt_ts: Rename mxt_fw_version_show to fw_version_show Jiada Wang
2020-03-25 13:32 ` [PATCH v9 18/55] Input: atmel_mxt_ts: Rename mxt_hw_version_show to hw_version_show Jiada Wang
2020-03-25 13:32 ` [PATCH v9 19/55] Input: atmel_mxt_ts: rename mxt_update_fw_store to update_fw_store Jiada Wang
2020-03-25 13:32 ` [PATCH v9 20/55] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 21/55] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-25 13:33 ` [PATCH v9 22/55] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-25 13:33 ` [PATCH v9 23/55] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-25 13:33 ` [PATCH v9 24/55] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 25/55] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-25 13:33 ` [PATCH v9 26/55] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-03-25 13:33 ` [PATCH v9 27/55] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-25 13:33 ` [PATCH v9 28/55] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-25 13:33 ` [PATCH v9 29/55] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-25 13:33 ` [PATCH v9 30/55] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-25 13:33 ` [PATCH v9 31/55] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-03-25 13:33 ` [PATCH v9 32/55] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-25 13:33 ` [PATCH v9 33/55] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-25 13:33 ` [PATCH v9 34/55] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-25 13:33 ` [PATCH v9 35/55] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-25 13:33 ` [PATCH v9 36/55] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-25 13:33 ` [PATCH v9 37/55] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-25 13:33 ` [PATCH v9 38/55] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-25 13:33 ` [PATCH v9 39/55] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 40/55] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-25 13:33 ` [PATCH v9 41/55] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-25 13:33 ` [PATCH v9 42/55] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-25 13:33 ` [PATCH v9 43/55] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-03-25 13:33 ` [PATCH v9 44/55] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 45/55] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 46/55] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 47/55] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 48/55] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 49/55] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-25 13:33 ` [PATCH v9 50/55] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-25 13:33 ` [PATCH v9 51/55] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-25 13:33 ` [PATCH v9 52/55] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-03-25 19:35 ` Dmitry Osipenko
2020-03-25 19:41 ` Dmitry Osipenko
2020-03-27 12:49 ` Wang, Jiada
2020-03-27 13:37 ` Dmitry Osipenko
2020-03-27 13:43 ` Dmitry Osipenko
2020-03-25 13:33 ` [PATCH v9 53/55] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-25 13:33 ` [PATCH v9 54/55] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-03-25 13:33 ` [PATCH v9 55/55] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200325133334.19346-14-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=Andrew_Gabbasov@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=bsz@semihalf.com \
--cc=dmitry.torokhov@gmail.com \
--cc=erosca@de.adit-jv.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).