* [PATCH] Input: elants_i2c - support palm detection
@ 2020-03-26 7:58 Johnny Chuang
2020-03-29 2:14 ` Peter Hutterer
0 siblings, 1 reply; 5+ messages in thread
From: Johnny Chuang @ 2020-03-26 7:58 UTC (permalink / raw)
To: Dmitry Torokhov, Benjamin Tissoires, Peter Hutterer,
linux-kernel, linux-input, Rob Schonberger, Johnny Chuang
Cc: James Chen, Jennifer Tsai, Paul Liang, Jeff Chuang
From: Johnny Chuang <johnny.chuang@emc.com.tw>
Elan define finger/palm detection on the least significant bit of byte 33.
The default value is 1 for all firmwares, which report as MT_TOOL_FINGER.
If firmware support palm detection, the bit will change to 0 and
report as MT_TOOL_PALM when firmware detecting palm.
Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
---
drivers/input/touchscreen/elants_i2c.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 14c577c..3b4d9eb3 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -73,6 +73,7 @@
#define FW_POS_STATE 1
#define FW_POS_TOTAL 2
#define FW_POS_XY 3
+#define FW_POS_TOOL_TYPE 33
#define FW_POS_CHECKSUM 34
#define FW_POS_WIDTH 35
#define FW_POS_PRESSURE 45
@@ -842,6 +843,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
{
struct input_dev *input = ts->input;
unsigned int n_fingers;
+ unsigned int tool_type;
u16 finger_state;
int i;
@@ -852,6 +854,12 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
dev_dbg(&ts->client->dev,
"n_fingers: %u, state: %04x\n", n_fingers, finger_state);
+ /* Note: all fingers have the same tool type */
+ if (buf[FW_POS_TOOL_TYPE] & 0x01)
+ tool_type = MT_TOOL_FINGER;
+ else
+ tool_type = MT_TOOL_PALM;
+
for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
if (finger_state & 1) {
unsigned int x, y, p, w;
@@ -867,7 +875,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
i, x, y, p, w);
input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+ input_mt_report_slot_state(input, tool_type, true);
input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
input_event(input, EV_ABS, ABS_MT_PRESSURE, p);
@@ -1307,6 +1315,7 @@ static int elants_i2c_probe(struct i2c_client *client,
input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+ input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0);
input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] Input: elants_i2c - support palm detection
2020-03-26 7:58 [PATCH] Input: elants_i2c - support palm detection Johnny Chuang
@ 2020-03-29 2:14 ` Peter Hutterer
2020-03-30 0:59 ` Johnny.Chuang
0 siblings, 1 reply; 5+ messages in thread
From: Peter Hutterer @ 2020-03-29 2:14 UTC (permalink / raw)
To: Johnny Chuang
Cc: Dmitry Torokhov, Benjamin Tissoires, linux-kernel, linux-input,
Rob Schonberger, Johnny Chuang, James Chen, Jennifer Tsai,
Paul Liang, Jeff Chuang
On Thu, Mar 26, 2020 at 03:58:45PM +0800, Johnny Chuang wrote:
> From: Johnny Chuang <johnny.chuang@emc.com.tw>
>
> Elan define finger/palm detection on the least significant bit of byte 33.
> The default value is 1 for all firmwares, which report as MT_TOOL_FINGER.
> If firmware support palm detection, the bit will change to 0 and
> report as MT_TOOL_PALM when firmware detecting palm.
>
> Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
> ---
> drivers/input/touchscreen/elants_i2c.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
> index 14c577c..3b4d9eb3 100644
> --- a/drivers/input/touchscreen/elants_i2c.c
> +++ b/drivers/input/touchscreen/elants_i2c.c
> @@ -73,6 +73,7 @@
> #define FW_POS_STATE 1
> #define FW_POS_TOTAL 2
> #define FW_POS_XY 3
> +#define FW_POS_TOOL_TYPE 33
> #define FW_POS_CHECKSUM 34
> #define FW_POS_WIDTH 35
> #define FW_POS_PRESSURE 45
> @@ -842,6 +843,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
> {
> struct input_dev *input = ts->input;
> unsigned int n_fingers;
> + unsigned int tool_type;
> u16 finger_state;
> int i;
>
> @@ -852,6 +854,12 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
> dev_dbg(&ts->client->dev,
> "n_fingers: %u, state: %04x\n", n_fingers, finger_state);
>
> + /* Note: all fingers have the same tool type */
> + if (buf[FW_POS_TOOL_TYPE] & 0x01)
> + tool_type = MT_TOOL_FINGER;
> + else
> + tool_type = MT_TOOL_PALM;
> +
> for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
> if (finger_state & 1) {
> unsigned int x, y, p, w;
> @@ -867,7 +875,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
> i, x, y, p, w);
>
> input_mt_slot(input, i);
> - input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
> + input_mt_report_slot_state(input, tool_type, true);
> input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
> input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
> input_event(input, EV_ABS, ABS_MT_PRESSURE, p);
> @@ -1307,6 +1315,7 @@ static int elants_i2c_probe(struct i2c_client *client,
> input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
> input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
> input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
> + input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0);
if you're only reporting pen and palm, can we set this to MT_TOOL_PALM
instead? Otherwise you're indicating you may also send MT_TOOL_DIAL which is
unlikely on this hardware :)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> otherwise
Cheers,
Peter
> input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
> input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
> input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH] Input: elants_i2c - support palm detection
2020-03-29 2:14 ` Peter Hutterer
@ 2020-03-30 0:59 ` Johnny.Chuang
2020-03-30 3:47 ` Peter Hutterer
0 siblings, 1 reply; 5+ messages in thread
From: Johnny.Chuang @ 2020-03-30 0:59 UTC (permalink / raw)
To: 'Peter Hutterer', 'Johnny Chuang'
Cc: 'Dmitry Torokhov', 'Benjamin Tissoires',
linux-kernel, linux-input, 'Rob Schonberger',
'James Chen', 'Jennifer Tsai',
'Paul Liang', 'Jeff Chuang'
> -----Original Message-----
> From: Peter Hutterer [mailto:peter.hutterer@who-t.net]
> Sent: Sunday, March 29, 2020 10:15 AM
> To: Johnny Chuang
> Cc: Dmitry Torokhov; Benjamin Tissoires; linux-kernel@vger.kernel.org;
> linux-input@vger.kernel.org; Rob Schonberger; Johnny Chuang; James Chen;
> Jennifer Tsai; Paul Liang; Jeff Chuang
> Subject: Re: [PATCH] Input: elants_i2c - support palm detection
>
> On Thu, Mar 26, 2020 at 03:58:45PM +0800, Johnny Chuang wrote:
> > From: Johnny Chuang <johnny.chuang@emc.com.tw>
> >
> > Elan define finger/palm detection on the least significant bit of byte
33.
> > The default value is 1 for all firmwares, which report as
MT_TOOL_FINGER.
> > If firmware support palm detection, the bit will change to 0 and
> > report as MT_TOOL_PALM when firmware detecting palm.
> >
> > Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
> > ---
> > drivers/input/touchscreen/elants_i2c.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/input/touchscreen/elants_i2c.c
> > b/drivers/input/touchscreen/elants_i2c.c
> > index 14c577c..3b4d9eb3 100644
> > --- a/drivers/input/touchscreen/elants_i2c.c
> > +++ b/drivers/input/touchscreen/elants_i2c.c
> > @@ -73,6 +73,7 @@
> > #define FW_POS_STATE 1
> > #define FW_POS_TOTAL 2
> > #define FW_POS_XY 3
> > +#define FW_POS_TOOL_TYPE 33
> > #define FW_POS_CHECKSUM 34
> > #define FW_POS_WIDTH 35
> > #define FW_POS_PRESSURE 45
> > @@ -842,6 +843,7 @@ static void elants_i2c_mt_event(struct elants_data
> > *ts, u8 *buf) {
> > struct input_dev *input = ts->input;
> > unsigned int n_fingers;
> > + unsigned int tool_type;
> > u16 finger_state;
> > int i;
> >
> > @@ -852,6 +854,12 @@ static void elants_i2c_mt_event(struct elants_data
> *ts, u8 *buf)
> > dev_dbg(&ts->client->dev,
> > "n_fingers: %u, state: %04x\n", n_fingers, finger_state);
> >
> > + /* Note: all fingers have the same tool type */
> > + if (buf[FW_POS_TOOL_TYPE] & 0x01)
> > + tool_type = MT_TOOL_FINGER;
> > + else
> > + tool_type = MT_TOOL_PALM;
> > +
> > for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
> > if (finger_state & 1) {
> > unsigned int x, y, p, w;
> > @@ -867,7 +875,7 @@ static void elants_i2c_mt_event(struct elants_data
> *ts, u8 *buf)
> > i, x, y, p, w);
> >
> > input_mt_slot(input, i);
> > - input_mt_report_slot_state(input, MT_TOOL_FINGER,
true);
> > + input_mt_report_slot_state(input, tool_type, true);
> > input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
> > input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
> > input_event(input, EV_ABS, ABS_MT_PRESSURE, p); @@
> -1307,6 +1315,7
> > @@ static int elants_i2c_probe(struct i2c_client *client,
> > input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0,
> 0);
> > input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
> > input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
> > + input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, 0,
> MT_TOOL_MAX, 0,
> > +0);
>
> if you're only reporting pen and palm, can we set this to MT_TOOL_PALM
> instead? Otherwise you're indicating you may also send MT_TOOL_DIAL which
> is unlikely on this hardware :)
>
Yes, we do not have MT_TOOL_DIAL on touch screen.
So I need to modify MT_TOOL_MAX to MT_TOOL_PALM, right?
> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> otherwise
>
> Cheers,
> Peter
>
> > input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
> > input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
> > input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
> > --
> > 2.7.4
> >
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Input: elants_i2c - support palm detection
2020-03-30 0:59 ` Johnny.Chuang
@ 2020-03-30 3:47 ` Peter Hutterer
2020-03-30 5:45 ` Johnny.Chuang
0 siblings, 1 reply; 5+ messages in thread
From: Peter Hutterer @ 2020-03-30 3:47 UTC (permalink / raw)
To: Johnny.Chuang
Cc: 'Johnny Chuang', 'Dmitry Torokhov',
'Benjamin Tissoires',
linux-kernel, linux-input, 'Rob Schonberger',
'James Chen', 'Jennifer Tsai',
'Paul Liang', 'Jeff Chuang'
On Mon, Mar 30, 2020 at 08:59:51AM +0800, Johnny.Chuang wrote:
> > -----Original Message-----
> > From: Peter Hutterer [mailto:peter.hutterer@who-t.net]
> > Sent: Sunday, March 29, 2020 10:15 AM
> > To: Johnny Chuang
> > Cc: Dmitry Torokhov; Benjamin Tissoires; linux-kernel@vger.kernel.org;
> > linux-input@vger.kernel.org; Rob Schonberger; Johnny Chuang; James Chen;
> > Jennifer Tsai; Paul Liang; Jeff Chuang
> > Subject: Re: [PATCH] Input: elants_i2c - support palm detection
> >
> > On Thu, Mar 26, 2020 at 03:58:45PM +0800, Johnny Chuang wrote:
> > > From: Johnny Chuang <johnny.chuang@emc.com.tw>
> > >
> > > Elan define finger/palm detection on the least significant bit of byte
> 33.
> > > The default value is 1 for all firmwares, which report as
> MT_TOOL_FINGER.
> > > If firmware support palm detection, the bit will change to 0 and
> > > report as MT_TOOL_PALM when firmware detecting palm.
> > >
> > > Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
> > > ---
> > > drivers/input/touchscreen/elants_i2c.c | 11 ++++++++++-
> > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/input/touchscreen/elants_i2c.c
> > > b/drivers/input/touchscreen/elants_i2c.c
> > > index 14c577c..3b4d9eb3 100644
> > > --- a/drivers/input/touchscreen/elants_i2c.c
> > > +++ b/drivers/input/touchscreen/elants_i2c.c
> > > @@ -73,6 +73,7 @@
> > > #define FW_POS_STATE 1
> > > #define FW_POS_TOTAL 2
> > > #define FW_POS_XY 3
> > > +#define FW_POS_TOOL_TYPE 33
> > > #define FW_POS_CHECKSUM 34
> > > #define FW_POS_WIDTH 35
> > > #define FW_POS_PRESSURE 45
> > > @@ -842,6 +843,7 @@ static void elants_i2c_mt_event(struct elants_data
> > > *ts, u8 *buf) {
> > > struct input_dev *input = ts->input;
> > > unsigned int n_fingers;
> > > + unsigned int tool_type;
> > > u16 finger_state;
> > > int i;
> > >
> > > @@ -852,6 +854,12 @@ static void elants_i2c_mt_event(struct elants_data
> > *ts, u8 *buf)
> > > dev_dbg(&ts->client->dev,
> > > "n_fingers: %u, state: %04x\n", n_fingers, finger_state);
> > >
> > > + /* Note: all fingers have the same tool type */
> > > + if (buf[FW_POS_TOOL_TYPE] & 0x01)
> > > + tool_type = MT_TOOL_FINGER;
> > > + else
> > > + tool_type = MT_TOOL_PALM;
> > > +
> > > for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
> > > if (finger_state & 1) {
> > > unsigned int x, y, p, w;
> > > @@ -867,7 +875,7 @@ static void elants_i2c_mt_event(struct elants_data
> > *ts, u8 *buf)
> > > i, x, y, p, w);
> > >
> > > input_mt_slot(input, i);
> > > - input_mt_report_slot_state(input, MT_TOOL_FINGER,
> true);
> > > + input_mt_report_slot_state(input, tool_type, true);
> > > input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
> > > input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
> > > input_event(input, EV_ABS, ABS_MT_PRESSURE, p); @@
> > -1307,6 +1315,7
> > > @@ static int elants_i2c_probe(struct i2c_client *client,
> > > input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0,
> > 0);
> > > input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
> > > input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
> > > + input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, 0,
> > MT_TOOL_MAX, 0,
> > > +0);
> >
> > if you're only reporting pen and palm, can we set this to MT_TOOL_PALM
> > instead? Otherwise you're indicating you may also send MT_TOOL_DIAL which
> > is unlikely on this hardware :)
> >
>
> Yes, we do not have MT_TOOL_DIAL on touch screen.
> So I need to modify MT_TOOL_MAX to MT_TOOL_PALM, right?
yes please.
Cheers,
Peter
>
> > Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> otherwise
> >
> > Cheers,
> > Peter
> >
> > > input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
> > > input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
> > > input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
> > > --
> > > 2.7.4
> > >
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH] Input: elants_i2c - support palm detection
2020-03-30 3:47 ` Peter Hutterer
@ 2020-03-30 5:45 ` Johnny.Chuang
0 siblings, 0 replies; 5+ messages in thread
From: Johnny.Chuang @ 2020-03-30 5:45 UTC (permalink / raw)
To: 'Peter Hutterer'
Cc: 'Johnny Chuang', 'Dmitry Torokhov',
'Benjamin Tissoires',
linux-kernel, linux-input, 'Rob Schonberger',
'James Chen', 'Jennifer Tsai',
'Paul Liang', 'Jeff Chuang'
> -----Original Message-----
> From: Peter Hutterer [mailto:peter.hutterer@who-t.net]
> Sent: Monday, March 30, 2020 11:48 AM
> To: Johnny.Chuang
> Cc: 'Johnny Chuang'; 'Dmitry Torokhov'; 'Benjamin Tissoires';
> linux-kernel@vger.kernel.org; linux-input@vger.kernel.org; 'Rob
Schonberger';
> 'James Chen'; 'Jennifer Tsai'; 'Paul Liang'; 'Jeff Chuang'
> Subject: Re: [PATCH] Input: elants_i2c - support palm detection
>
> On Mon, Mar 30, 2020 at 08:59:51AM +0800, Johnny.Chuang wrote:
> > > -----Original Message-----
> > > From: Peter Hutterer [mailto:peter.hutterer@who-t.net]
> > > Sent: Sunday, March 29, 2020 10:15 AM
> > > To: Johnny Chuang
> > > Cc: Dmitry Torokhov; Benjamin Tissoires; linux-kernel@vger.kernel.org;
> > > linux-input@vger.kernel.org; Rob Schonberger; Johnny Chuang; James
> Chen;
> > > Jennifer Tsai; Paul Liang; Jeff Chuang
> > > Subject: Re: [PATCH] Input: elants_i2c - support palm detection
> > >
> > > On Thu, Mar 26, 2020 at 03:58:45PM +0800, Johnny Chuang wrote:
> > > > From: Johnny Chuang <johnny.chuang@emc.com.tw>
> > > >
> > > > Elan define finger/palm detection on the least significant bit of
byte
> > 33.
> > > > The default value is 1 for all firmwares, which report as
> > MT_TOOL_FINGER.
> > > > If firmware support palm detection, the bit will change to 0 and
> > > > report as MT_TOOL_PALM when firmware detecting palm.
> > > >
> > > > Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
> > > > ---
> > > > drivers/input/touchscreen/elants_i2c.c | 11 ++++++++++-
> > > > 1 file changed, 10 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/input/touchscreen/elants_i2c.c
> > > > b/drivers/input/touchscreen/elants_i2c.c
> > > > index 14c577c..3b4d9eb3 100644
> > > > --- a/drivers/input/touchscreen/elants_i2c.c
> > > > +++ b/drivers/input/touchscreen/elants_i2c.c
> > > > @@ -73,6 +73,7 @@
> > > > #define FW_POS_STATE 1
> > > > #define FW_POS_TOTAL 2
> > > > #define FW_POS_XY 3
> > > > +#define FW_POS_TOOL_TYPE 33
> > > > #define FW_POS_CHECKSUM 34
> > > > #define FW_POS_WIDTH 35
> > > > #define FW_POS_PRESSURE 45
> > > > @@ -842,6 +843,7 @@ static void elants_i2c_mt_event(struct
> elants_data
> > > > *ts, u8 *buf) {
> > > > struct input_dev *input = ts->input;
> > > > unsigned int n_fingers;
> > > > + unsigned int tool_type;
> > > > u16 finger_state;
> > > > int i;
> > > >
> > > > @@ -852,6 +854,12 @@ static void elants_i2c_mt_event(struct
> elants_data
> > > *ts, u8 *buf)
> > > > dev_dbg(&ts->client->dev,
> > > > "n_fingers: %u, state: %04x\n", n_fingers,
finger_state);
> > > >
> > > > + /* Note: all fingers have the same tool type */
> > > > + if (buf[FW_POS_TOOL_TYPE] & 0x01)
> > > > + tool_type = MT_TOOL_FINGER;
> > > > + else
> > > > + tool_type = MT_TOOL_PALM;
> > > > +
> > > > for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
> > > > if (finger_state & 1) {
> > > > unsigned int x, y, p, w;
> > > > @@ -867,7 +875,7 @@ static void elants_i2c_mt_event(struct
> elants_data
> > > *ts, u8 *buf)
> > > > i, x, y, p, w);
> > > >
> > > > input_mt_slot(input, i);
> > > > - input_mt_report_slot_state(input,
MT_TOOL_FINGER,
> > true);
> > > > + input_mt_report_slot_state(input, tool_type,
true);
> > > > input_event(input, EV_ABS,
ABS_MT_POSITION_X, x);
> > > > input_event(input, EV_ABS,
ABS_MT_POSITION_Y, y);
> > > > input_event(input, EV_ABS, ABS_MT_PRESSURE,
p); @@
> > > -1307,6 +1315,7
> > > > @@ static int elants_i2c_probe(struct i2c_client *client,
> > > > input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0,
ts->y_max,
> 0,
> > > 0);
> > > > input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255,
0,
> 0);
> > > > input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0,
0);
> > > > + input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, 0,
> > > MT_TOOL_MAX, 0,
> > > > +0);
> > >
> > > if you're only reporting pen and palm, can we set this to MT_TOOL_PALM
> > > instead? Otherwise you're indicating you may also send MT_TOOL_DIAL
> which
> > > is unlikely on this hardware :)
> > >
> >
> > Yes, we do not have MT_TOOL_DIAL on touch screen.
> > So I need to modify MT_TOOL_MAX to MT_TOOL_PALM, right?
>
> yes please.
>
> Cheers,
> Peter
>
OK, I will submit patch v2 today.
> >
> > > Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> otherwise
> > >
> > > Cheers,
> > > Peter
> > >
> > > > input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
> > > > input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
> > > > input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
> > > > --
> > > > 2.7.4
> > > >
> >
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-03-30 5:45 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-26 7:58 [PATCH] Input: elants_i2c - support palm detection Johnny Chuang
2020-03-29 2:14 ` Peter Hutterer
2020-03-30 0:59 ` Johnny.Chuang
2020-03-30 3:47 ` Peter Hutterer
2020-03-30 5:45 ` Johnny.Chuang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).