Linux Input Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v8 0/2] input: ADC joystick driver & DT bindings
@ 2020-07-19 22:11 Artur Rojek
  2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Artur Rojek @ 2020-07-19 22:11 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-kernel, Artur Rojek

Hi all,

this series is a continuation of adc-joystick changes split from:
https://lore.kernel.org/linux-iio/20200709152200.10039-1-contact@artur-rojek.eu/

Rob, the bindings example in patch 1/2 depends on changes introduced
in another patchset, still to be merged:
https://lore.kernel.org/linux-iio/20200719205307.87385-4-contact@artur-rojek.eu/  
Your scripts will most likely fail to validate this. You have already
reviewed this patch when it was still part of the aforementioned series.

Cheers,
Artur

Artur Rojek (2):
  dt-bindings: input: Add docs for ADC driven joystick.
  input: joystick: Add ADC attached joystick driver.

 .../bindings/input/adc-joystick.yaml          | 121 +++++++++
 drivers/input/joystick/Kconfig                |  10 +
 drivers/input/joystick/Makefile               |   1 +
 drivers/input/joystick/adc-joystick.c         | 253 ++++++++++++++++++
 4 files changed, 385 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml
 create mode 100644 drivers/input/joystick/adc-joystick.c

-- 
2.27.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick.
  2020-07-19 22:11 [PATCH v8 0/2] input: ADC joystick driver & DT bindings Artur Rojek
@ 2020-07-19 22:11 ` Artur Rojek
  2020-07-20 16:32   ` Rob Herring
  2020-07-19 22:11 ` [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver Artur Rojek
  2020-07-20  9:57 ` [PATCH v8 0/2] input: ADC joystick driver & DT bindings Jonathan Cameron
  2 siblings, 1 reply; 6+ messages in thread
From: Artur Rojek @ 2020-07-19 22:11 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-kernel, Artur Rojek, Rob Herring

Add documentation for the adc-joystick driver, used to provide support
for joysticks connected over ADC.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
---

 Changes:

 v2: - Add `reg` property to axis subnode in order to enumerate the axes,
     - rename `linux,abs-code` property to `linux,code`,
     - drop `linux,` prefix from the remaining properties of axis subnode

 v3: no change

 v4: - remove "bindings" from the unique identifier string,
     - replace `|` with `>` for all description properties,
     - specify the number of items for `io-channels`,
     - correct the regex pattern of `axis` property,
     - specify the value range of `reg` property for each axis,
     - put `abs-range` properties under `allOf` 

 v5: add `a-f` to the regex pattern of `axis` property

 v6-v8: no change

 Notes:

 Rob, the bindings example in this patch depends on changes introduced
 in another patchset, still to be merged:
 https://lore.kernel.org/linux-iio/20200719205307.87385-4-contact@artur-rojek.eu/  
 Your scripts will most likely fail to validate this.

 .../bindings/input/adc-joystick.yaml          | 121 ++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml

diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
new file mode 100644
index 000000000000..054406bbd22b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC attached joystick
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Bindings for joystick devices connected to ADC controllers supporting
+  the Industrial I/O subsystem.
+
+properties:
+  compatible:
+    const: adc-joystick
+
+  io-channels:
+    minItems: 1
+    maxItems: 1024
+    description: >
+      List of phandle and IIO specifier pairs.
+      Each pair defines one ADC channel to which a joystick axis is connected.
+      See Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - io-channels
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+patternProperties:
+  "^axis@[0-9a-f]+$":
+    type: object
+    description: >
+      Represents a joystick axis bound to the given ADC channel.
+      For each entry in the io-channels list, one axis subnode with a matching
+      reg property must be specified.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of an io-channels list entry bound to this axis.
+
+      linux,code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: EV_ABS specific event code generated by the axis.
+
+      abs-range:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+          - items:
+              - description: minimum value
+              - description: maximum value
+        description: >
+          Minimum and maximum values produced by the axis.
+          For an ABS_X axis this will be the left-most and right-most
+          inclination of the joystick. If min > max, it is left to userspace to
+          treat the axis as inverted.
+          This property is interpreted as two signed 32 bit values.
+
+      abs-fuzz:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Amount of noise in the input value.
+          Omitting this property indicates the axis is precise.
+
+      abs-flat:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Axial "deadzone", or area around the center position, where the axis
+          is considered to be at rest.
+          Omitting this property indicates the axis always returns to exactly
+          the center position.
+
+    required:
+      - reg
+      - linux,code
+      - abs-range
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+    #include <dt-bindings/input/input.h>
+
+    joystick: adc-joystick {
+      compatible = "adc-joystick";
+      io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
+                    <&adc INGENIC_ADC_TOUCH_YP>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      axis@0 {
+              reg = <0>;
+              linux,code = <ABS_X>;
+              abs-range = <3300 0>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+      axis@1 {
+              reg = <1>;
+              linux,code = <ABS_Y>;
+              abs-range = <0 3300>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+    };
-- 
2.27.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver.
  2020-07-19 22:11 [PATCH v8 0/2] input: ADC joystick driver & DT bindings Artur Rojek
  2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
@ 2020-07-19 22:11 ` Artur Rojek
  2020-07-20 10:04   ` Jonathan Cameron
  2020-07-20  9:57 ` [PATCH v8 0/2] input: ADC joystick driver & DT bindings Jonathan Cameron
  2 siblings, 1 reply; 6+ messages in thread
From: Artur Rojek @ 2020-07-19 22:11 UTC (permalink / raw)
  To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron,
	Paul Cercueil, Andy Shevchenko
  Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree,
	linux-kernel, Artur Rojek

Add a driver for joystick devices connected to ADC controllers
supporting the Industrial I/O subsystem.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

 Changes:

 v2: - sanity check supported channel format on probe,
     - rename adc_joystick_disable to a more sensible adc_joystick_cleanup, 
     - enforce correct axis order by checking the `reg` property of
       child nodes

 v3-v5: no change

 v6: - remove redundant `<linux/of.h>`
     - set `val` for each endianness case in their respective branches
     - pass received error codes to return value of `adc_joystick_set_axes`
     - change `(bits >> 3) > 2` to `bits > 16` for readability
     - drop `of_match_ptr`

 v7: no change

 v8: - respect scan index when reading channel data,
     - solve sparse warnings related to *_to_cpu calls,
     - simplify channel count logic,
     - drop the redundant comma from adc_joystick_of_match[]

 drivers/input/joystick/Kconfig        |  10 +
 drivers/input/joystick/Makefile       |   1 +
 drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++++++++++
 3 files changed, 264 insertions(+)
 create mode 100644 drivers/input/joystick/adc-joystick.c

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index eb031b7a4866..b080f0cfb068 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -42,6 +42,16 @@ config JOYSTICK_A3D
 	  To compile this driver as a module, choose M here: the
 	  module will be called a3d.
 
+config JOYSTICK_ADC
+	tristate "Simple joystick connected over ADC"
+	depends on IIO
+	select IIO_BUFFER_CB
+	help
+	  Say Y here if you have a simple joystick connected over ADC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adc-joystick.
+
 config JOYSTICK_ADI
 	tristate "Logitech ADI digital joysticks and gamepads"
 	select GAMEPORT
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 8656023f6ef5..58232b3057d3 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -6,6 +6,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_JOYSTICK_A3D)		+= a3d.o
+obj-$(CONFIG_JOYSTICK_ADC)		+= adc-joystick.o
 obj-$(CONFIG_JOYSTICK_ADI)		+= adi.o
 obj-$(CONFIG_JOYSTICK_AMIGA)		+= amijoy.o
 obj-$(CONFIG_JOYSTICK_AS5011)		+= as5011.o
diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c
new file mode 100644
index 000000000000..a2c570de0b8a
--- /dev/null
+++ b/drivers/input/joystick/adc-joystick.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Input driver for joysticks connected over ADC.
+ * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu>
+ */
+#include <linux/ctype.h>
+#include <linux/input.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+struct adc_joystick_axis {
+	u32 code;
+	s32 range[2];
+	s32 fuzz;
+	s32 flat;
+};
+
+struct adc_joystick {
+	struct input_dev *input;
+	struct iio_cb_buffer *buffer;
+	struct adc_joystick_axis *axes;
+	struct iio_channel *chans;
+	int num_chans;
+};
+
+static int adc_joystick_handle(const void *data, void *private)
+{
+	struct adc_joystick *joy = private;
+	enum iio_endian endianness;
+	int bytes, msb, val, idx, i;
+	bool sign;
+
+	bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
+
+	for (i = 0; i < joy->num_chans; ++i) {
+		idx = joy->chans[i].channel->scan_index;
+		endianness = joy->chans[i].channel->scan_type.endianness;
+		msb = joy->chans[i].channel->scan_type.realbits - 1;
+		sign = (tolower(joy->chans[i].channel->scan_type.sign) == 's');
+
+		switch (bytes) {
+		case 1:
+			val = ((const u8 *)data)[idx];
+			break;
+		case 2:
+			if (endianness == IIO_BE)
+				val = be16_to_cpu(((const __be16 *)data)[idx]);
+			else if (endianness == IIO_LE)
+				val = le16_to_cpu(((const __le16 *)data)[idx]);
+			else /* IIO_CPU */
+				val = ((const u16 *)data)[idx];
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		val >>= joy->chans[i].channel->scan_type.shift;
+		if (sign)
+			val = sign_extend32(val, msb);
+		else
+			val &= GENMASK(msb, 0);
+		input_report_abs(joy->input, joy->axes[i].code, val);
+	}
+
+	input_sync(joy->input);
+
+	return 0;
+}
+
+static int adc_joystick_open(struct input_dev *dev)
+{
+	struct adc_joystick *joy = input_get_drvdata(dev);
+	int ret;
+
+	ret = iio_channel_start_all_cb(joy->buffer);
+	if (ret)
+		dev_err(dev->dev.parent, "Unable to start callback buffer");
+
+	return ret;
+}
+
+static void adc_joystick_close(struct input_dev *dev)
+{
+	struct adc_joystick *joy = input_get_drvdata(dev);
+
+	iio_channel_stop_all_cb(joy->buffer);
+}
+
+static void adc_joystick_cleanup(void *data)
+{
+	iio_channel_release_all_cb(data);
+}
+
+static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy)
+{
+	struct adc_joystick_axis *axes;
+	struct fwnode_handle *child;
+	int num_axes, ret, i;
+
+	num_axes = device_get_child_node_count(dev);
+	if (!num_axes) {
+		dev_err(dev, "Unable to find child nodes");
+		return -EINVAL;
+	}
+
+	if (num_axes != joy->num_chans) {
+		dev_err(dev, "Got %d child nodes for %d channels",
+			num_axes, joy->num_chans);
+		return -EINVAL;
+	}
+
+	axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL);
+	if (!axes)
+		return -ENOMEM;
+
+	device_for_each_child_node(dev, child) {
+		ret = fwnode_property_read_u32(child, "reg", &i);
+		if (ret) {
+			dev_err(dev, "reg invalid or missing");
+			goto err;
+		}
+
+		if (i >= num_axes) {
+			ret = -EINVAL;
+			dev_err(dev, "No matching axis for reg %d", i);
+			goto err;
+		}
+
+		ret = fwnode_property_read_u32(child, "linux,code",
+					     &axes[i].code);
+		if (ret) {
+			dev_err(dev, "linux,code invalid or missing");
+			goto err;
+		}
+
+		ret = fwnode_property_read_u32_array(child, "abs-range",
+						   axes[i].range, 2);
+		if (ret) {
+			dev_err(dev, "abs-range invalid or missing");
+			goto err;
+		}
+
+		fwnode_property_read_u32(child, "abs-fuzz",
+					 &axes[i].fuzz);
+		fwnode_property_read_u32(child, "abs-flat",
+					 &axes[i].flat);
+
+		input_set_abs_params(joy->input, axes[i].code,
+				     axes[i].range[0], axes[i].range[1],
+				     axes[i].fuzz,
+				     axes[i].flat);
+		input_set_capability(joy->input, EV_ABS, axes[i].code);
+	}
+
+	joy->axes = axes;
+
+	return 0;
+
+err:
+	fwnode_handle_put(child);
+	return ret;
+}
+
+static int adc_joystick_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_joystick *joy;
+	struct input_dev *input;
+	int bits, ret, i;
+
+	joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL);
+	if (!joy)
+		return -ENOMEM;
+
+	joy->chans = devm_iio_channel_get_all(dev);
+	if (IS_ERR(joy->chans)) {
+		ret = PTR_ERR(joy->chans);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Unable to get IIO channels");
+		return ret;
+	}
+
+	/* Count how many channels we got. NULL terminated. */
+	for (i = 0; joy->chans[i].indio_dev; ++i) {
+		bits = joy->chans[i].channel->scan_type.storagebits;
+		if (!bits || (bits > 16)) {
+			dev_err(dev, "Unsupported channel storage size");
+			return -EINVAL;
+		}
+		if (bits != joy->chans[0].channel->scan_type.storagebits) {
+			dev_err(dev, "Channels must have equal storage size");
+			return -EINVAL;
+		}
+	}
+	joy->num_chans = i;
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "Unable to allocate input device");
+		return -ENOMEM;
+	}
+
+	joy->input = input;
+	input->name = pdev->name;
+	input->id.bustype = BUS_HOST;
+	input->open = adc_joystick_open;
+	input->close = adc_joystick_close;
+
+	ret = adc_joystick_set_axes(dev, joy);
+	if (ret)
+		return ret;
+
+	input_set_drvdata(input, joy);
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(dev, "Unable to register input device: %d", ret);
+		return ret;
+	}
+
+	joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy);
+	if (IS_ERR(joy->buffer)) {
+		dev_err(dev, "Unable to allocate callback buffer");
+		return PTR_ERR(joy->buffer);
+	}
+
+	ret = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer);
+	if (ret)
+		dev_err(dev, "Unable to add action");
+
+	return ret;
+}
+
+static const struct of_device_id adc_joystick_of_match[] = {
+	{ .compatible = "adc-joystick", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adc_joystick_of_match);
+
+static struct platform_driver adc_joystick_driver = {
+	.driver = {
+		.name = "adc-joystick",
+		.of_match_table = adc_joystick_of_match,
+	},
+	.probe = adc_joystick_probe,
+};
+module_platform_driver(adc_joystick_driver);
+
+MODULE_DESCRIPTION("Input driver for joysticks connected over ADC");
+MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
+MODULE_LICENSE("GPL");
-- 
2.27.0


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v8 0/2] input: ADC joystick driver & DT bindings
  2020-07-19 22:11 [PATCH v8 0/2] input: ADC joystick driver & DT bindings Artur Rojek
  2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
  2020-07-19 22:11 ` [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver Artur Rojek
@ 2020-07-20  9:57 ` Jonathan Cameron
  2 siblings, 0 replies; 6+ messages in thread
From: Jonathan Cameron @ 2020-07-20  9:57 UTC (permalink / raw)
  To: Artur Rojek
  Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Paul Cercueil,
	Andy Shevchenko, Heiko Stuebner, Ezequiel Garcia, linux-input,
	devicetree, linux-kernel

On Mon, 20 Jul 2020 00:11:01 +0200
Artur Rojek <contact@artur-rojek.eu> wrote:

> Hi all,
> 
> this series is a continuation of adc-joystick changes split from:
> https://lore.kernel.org/linux-iio/20200709152200.10039-1-contact@artur-rojek.eu/
> 
> Rob, the bindings example in patch 1/2 depends on changes introduced
> in another patchset, still to be merged:
> https://lore.kernel.org/linux-iio/20200719205307.87385-4-contact@artur-rojek.eu/  
> Your scripts will most likely fail to validate this. You have already
> reviewed this patch when it was still part of the aforementioned series.

I've just taken v9 of the dependency into iio.git as an immutable branch based on 5.8

https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git ib-5.8-jz47xx-ts

Thanks,

Jonathan

> 
> Cheers,
> Artur
> 
> Artur Rojek (2):
>   dt-bindings: input: Add docs for ADC driven joystick.
>   input: joystick: Add ADC attached joystick driver.
> 
>  .../bindings/input/adc-joystick.yaml          | 121 +++++++++
>  drivers/input/joystick/Kconfig                |  10 +
>  drivers/input/joystick/Makefile               |   1 +
>  drivers/input/joystick/adc-joystick.c         | 253 ++++++++++++++++++
>  4 files changed, 385 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml
>  create mode 100644 drivers/input/joystick/adc-joystick.c
> 


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver.
  2020-07-19 22:11 ` [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver Artur Rojek
@ 2020-07-20 10:04   ` Jonathan Cameron
  0 siblings, 0 replies; 6+ messages in thread
From: Jonathan Cameron @ 2020-07-20 10:04 UTC (permalink / raw)
  To: Artur Rojek
  Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Paul Cercueil,
	Andy Shevchenko, Heiko Stuebner, Ezequiel Garcia, linux-input,
	devicetree, linux-kernel

On Mon, 20 Jul 2020 00:11:03 +0200
Artur Rojek <contact@artur-rojek.eu> wrote:

> Add a driver for joystick devices connected to ADC controllers
> supporting the Industrial I/O subsystem.
> 
> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> Tested-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Heiko Stuebner <heiko@sntech.de>
> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Looks good to me.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

I'm assuming this will got through input.

Jonathan

> ---
> 
>  Changes:
> 
>  v2: - sanity check supported channel format on probe,
>      - rename adc_joystick_disable to a more sensible adc_joystick_cleanup, 
>      - enforce correct axis order by checking the `reg` property of
>        child nodes
> 
>  v3-v5: no change
> 
>  v6: - remove redundant `<linux/of.h>`
>      - set `val` for each endianness case in their respective branches
>      - pass received error codes to return value of `adc_joystick_set_axes`
>      - change `(bits >> 3) > 2` to `bits > 16` for readability
>      - drop `of_match_ptr`
> 
>  v7: no change
> 
>  v8: - respect scan index when reading channel data,
>      - solve sparse warnings related to *_to_cpu calls,
>      - simplify channel count logic,
>      - drop the redundant comma from adc_joystick_of_match[]
> 
>  drivers/input/joystick/Kconfig        |  10 +
>  drivers/input/joystick/Makefile       |   1 +
>  drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++++++++++
>  3 files changed, 264 insertions(+)
>  create mode 100644 drivers/input/joystick/adc-joystick.c
> 
> diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
> index eb031b7a4866..b080f0cfb068 100644
> --- a/drivers/input/joystick/Kconfig
> +++ b/drivers/input/joystick/Kconfig
> @@ -42,6 +42,16 @@ config JOYSTICK_A3D
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called a3d.
>  
> +config JOYSTICK_ADC
> +	tristate "Simple joystick connected over ADC"
> +	depends on IIO
> +	select IIO_BUFFER_CB
> +	help
> +	  Say Y here if you have a simple joystick connected over ADC.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called adc-joystick.
> +
>  config JOYSTICK_ADI
>  	tristate "Logitech ADI digital joysticks and gamepads"
>  	select GAMEPORT
> diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
> index 8656023f6ef5..58232b3057d3 100644
> --- a/drivers/input/joystick/Makefile
> +++ b/drivers/input/joystick/Makefile
> @@ -6,6 +6,7 @@
>  # Each configuration option enables a list of files.
>  
>  obj-$(CONFIG_JOYSTICK_A3D)		+= a3d.o
> +obj-$(CONFIG_JOYSTICK_ADC)		+= adc-joystick.o
>  obj-$(CONFIG_JOYSTICK_ADI)		+= adi.o
>  obj-$(CONFIG_JOYSTICK_AMIGA)		+= amijoy.o
>  obj-$(CONFIG_JOYSTICK_AS5011)		+= as5011.o
> diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c
> new file mode 100644
> index 000000000000..a2c570de0b8a
> --- /dev/null
> +++ b/drivers/input/joystick/adc-joystick.c
> @@ -0,0 +1,253 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Input driver for joysticks connected over ADC.
> + * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu>
> + */
> +#include <linux/ctype.h>
> +#include <linux/input.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +
> +struct adc_joystick_axis {
> +	u32 code;
> +	s32 range[2];
> +	s32 fuzz;
> +	s32 flat;
> +};
> +
> +struct adc_joystick {
> +	struct input_dev *input;
> +	struct iio_cb_buffer *buffer;
> +	struct adc_joystick_axis *axes;
> +	struct iio_channel *chans;
> +	int num_chans;
> +};
> +
> +static int adc_joystick_handle(const void *data, void *private)
> +{
> +	struct adc_joystick *joy = private;
> +	enum iio_endian endianness;
> +	int bytes, msb, val, idx, i;
> +	bool sign;
> +
> +	bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
> +
> +	for (i = 0; i < joy->num_chans; ++i) {
> +		idx = joy->chans[i].channel->scan_index;
> +		endianness = joy->chans[i].channel->scan_type.endianness;
> +		msb = joy->chans[i].channel->scan_type.realbits - 1;
> +		sign = (tolower(joy->chans[i].channel->scan_type.sign) == 's');
> +
> +		switch (bytes) {
> +		case 1:
> +			val = ((const u8 *)data)[idx];
> +			break;
> +		case 2:
> +			if (endianness == IIO_BE)
> +				val = be16_to_cpu(((const __be16 *)data)[idx]);
> +			else if (endianness == IIO_LE)
> +				val = le16_to_cpu(((const __le16 *)data)[idx]);
> +			else /* IIO_CPU */
> +				val = ((const u16 *)data)[idx];
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +
> +		val >>= joy->chans[i].channel->scan_type.shift;
> +		if (sign)
> +			val = sign_extend32(val, msb);
> +		else
> +			val &= GENMASK(msb, 0);
> +		input_report_abs(joy->input, joy->axes[i].code, val);
> +	}
> +
> +	input_sync(joy->input);
> +
> +	return 0;
> +}
> +
> +static int adc_joystick_open(struct input_dev *dev)
> +{
> +	struct adc_joystick *joy = input_get_drvdata(dev);
> +	int ret;
> +
> +	ret = iio_channel_start_all_cb(joy->buffer);
> +	if (ret)
> +		dev_err(dev->dev.parent, "Unable to start callback buffer");
> +
> +	return ret;
> +}
> +
> +static void adc_joystick_close(struct input_dev *dev)
> +{
> +	struct adc_joystick *joy = input_get_drvdata(dev);
> +
> +	iio_channel_stop_all_cb(joy->buffer);
> +}
> +
> +static void adc_joystick_cleanup(void *data)
> +{
> +	iio_channel_release_all_cb(data);
> +}
> +
> +static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy)
> +{
> +	struct adc_joystick_axis *axes;
> +	struct fwnode_handle *child;
> +	int num_axes, ret, i;
> +
> +	num_axes = device_get_child_node_count(dev);
> +	if (!num_axes) {
> +		dev_err(dev, "Unable to find child nodes");
> +		return -EINVAL;
> +	}
> +
> +	if (num_axes != joy->num_chans) {
> +		dev_err(dev, "Got %d child nodes for %d channels",
> +			num_axes, joy->num_chans);
> +		return -EINVAL;
> +	}
> +
> +	axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL);
> +	if (!axes)
> +		return -ENOMEM;
> +
> +	device_for_each_child_node(dev, child) {
> +		ret = fwnode_property_read_u32(child, "reg", &i);
> +		if (ret) {
> +			dev_err(dev, "reg invalid or missing");
> +			goto err;
> +		}
> +
> +		if (i >= num_axes) {
> +			ret = -EINVAL;
> +			dev_err(dev, "No matching axis for reg %d", i);
> +			goto err;
> +		}
> +
> +		ret = fwnode_property_read_u32(child, "linux,code",
> +					     &axes[i].code);
> +		if (ret) {
> +			dev_err(dev, "linux,code invalid or missing");
> +			goto err;
> +		}
> +
> +		ret = fwnode_property_read_u32_array(child, "abs-range",
> +						   axes[i].range, 2);
> +		if (ret) {
> +			dev_err(dev, "abs-range invalid or missing");
> +			goto err;
> +		}
> +
> +		fwnode_property_read_u32(child, "abs-fuzz",
> +					 &axes[i].fuzz);
> +		fwnode_property_read_u32(child, "abs-flat",
> +					 &axes[i].flat);
> +
> +		input_set_abs_params(joy->input, axes[i].code,
> +				     axes[i].range[0], axes[i].range[1],
> +				     axes[i].fuzz,
> +				     axes[i].flat);
> +		input_set_capability(joy->input, EV_ABS, axes[i].code);
> +	}
> +
> +	joy->axes = axes;
> +
> +	return 0;
> +
> +err:
> +	fwnode_handle_put(child);
> +	return ret;
> +}
> +
> +static int adc_joystick_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct adc_joystick *joy;
> +	struct input_dev *input;
> +	int bits, ret, i;
> +
> +	joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL);
> +	if (!joy)
> +		return -ENOMEM;
> +
> +	joy->chans = devm_iio_channel_get_all(dev);
> +	if (IS_ERR(joy->chans)) {
> +		ret = PTR_ERR(joy->chans);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "Unable to get IIO channels");
> +		return ret;
> +	}
> +
> +	/* Count how many channels we got. NULL terminated. */
> +	for (i = 0; joy->chans[i].indio_dev; ++i) {
> +		bits = joy->chans[i].channel->scan_type.storagebits;
> +		if (!bits || (bits > 16)) {
> +			dev_err(dev, "Unsupported channel storage size");
> +			return -EINVAL;
> +		}
> +		if (bits != joy->chans[0].channel->scan_type.storagebits) {
> +			dev_err(dev, "Channels must have equal storage size");
> +			return -EINVAL;
> +		}
> +	}
> +	joy->num_chans = i;
> +
> +	input = devm_input_allocate_device(dev);
> +	if (!input) {
> +		dev_err(dev, "Unable to allocate input device");
> +		return -ENOMEM;
> +	}
> +
> +	joy->input = input;
> +	input->name = pdev->name;
> +	input->id.bustype = BUS_HOST;
> +	input->open = adc_joystick_open;
> +	input->close = adc_joystick_close;
> +
> +	ret = adc_joystick_set_axes(dev, joy);
> +	if (ret)
> +		return ret;
> +
> +	input_set_drvdata(input, joy);
> +	ret = input_register_device(input);
> +	if (ret) {
> +		dev_err(dev, "Unable to register input device: %d", ret);
> +		return ret;
> +	}
> +
> +	joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy);
> +	if (IS_ERR(joy->buffer)) {
> +		dev_err(dev, "Unable to allocate callback buffer");
> +		return PTR_ERR(joy->buffer);
> +	}
> +
> +	ret = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer);
> +	if (ret)
> +		dev_err(dev, "Unable to add action");
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id adc_joystick_of_match[] = {
> +	{ .compatible = "adc-joystick", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, adc_joystick_of_match);
> +
> +static struct platform_driver adc_joystick_driver = {
> +	.driver = {
> +		.name = "adc-joystick",
> +		.of_match_table = adc_joystick_of_match,
> +	},
> +	.probe = adc_joystick_probe,
> +};
> +module_platform_driver(adc_joystick_driver);
> +
> +MODULE_DESCRIPTION("Input driver for joysticks connected over ADC");
> +MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
> +MODULE_LICENSE("GPL");


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick.
  2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
@ 2020-07-20 16:32   ` Rob Herring
  0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2020-07-20 16:32 UTC (permalink / raw)
  To: Artur Rojek
  Cc: devicetree, linux-kernel, Mark Rutland, Rob Herring,
	Jonathan Cameron, Andy Shevchenko, Paul Cercueil,
	Ezequiel Garcia, Heiko Stuebner, Dmitry Torokhov, linux-input

On Mon, 20 Jul 2020 00:11:02 +0200, Artur Rojek wrote:
> Add documentation for the adc-joystick driver, used to provide support
> for joysticks connected over ADC.
> 
> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> Tested-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> 
>  Changes:
> 
>  v2: - Add `reg` property to axis subnode in order to enumerate the axes,
>      - rename `linux,abs-code` property to `linux,code`,
>      - drop `linux,` prefix from the remaining properties of axis subnode
> 
>  v3: no change
> 
>  v4: - remove "bindings" from the unique identifier string,
>      - replace `|` with `>` for all description properties,
>      - specify the number of items for `io-channels`,
>      - correct the regex pattern of `axis` property,
>      - specify the value range of `reg` property for each axis,
>      - put `abs-range` properties under `allOf`
> 
>  v5: add `a-f` to the regex pattern of `axis` property
> 
>  v6-v8: no change
> 
>  Notes:
> 
>  Rob, the bindings example in this patch depends on changes introduced
>  in another patchset, still to be merged:
>  https://lore.kernel.org/linux-iio/20200719205307.87385-4-contact@artur-rojek.eu/
>  Your scripts will most likely fail to validate this.
> 
>  .../bindings/input/adc-joystick.yaml          | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Error: Documentation/devicetree/bindings/input/adc-joystick.example.dts:24.31-32 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:315: recipe for target 'Documentation/devicetree/bindings/input/adc-joystick.example.dt.yaml' failed
make[1]: *** [Documentation/devicetree/bindings/input/adc-joystick.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1347: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1331964

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-19 22:11 [PATCH v8 0/2] input: ADC joystick driver & DT bindings Artur Rojek
2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek
2020-07-20 16:32   ` Rob Herring
2020-07-19 22:11 ` [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver Artur Rojek
2020-07-20 10:04   ` Jonathan Cameron
2020-07-20  9:57 ` [PATCH v8 0/2] input: ADC joystick driver & DT bindings Jonathan Cameron

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git