linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Raul E Rangel <rrangel@chromium.org>
To: linux-input@vger.kernel.org
Cc: dmitry.torokhov@gmail.com, Shirish.S@amd.com,
	Raul E Rangel <rrangel@chromium.org>,
	Andy Shevchenko <andy@infradead.org>, Dan Murphy <dmurphy@ti.com>,
	Darren Hart <dvhart@infradead.org>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	"Lee, Chun-Yi" <jlee@suse.com>, Pavel Machek <pavel@ucw.cz>,
	Rajat Jain <rajatja@google.com>,
	Stephen Boyd <swboyd@chromium.org>,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
	platform-driver-x86@vger.kernel.org
Subject: [PATCH v2 1/2] Input: i8042 - Prevent intermixing i8042 commands
Date: Thu, 27 Aug 2020 14:41:53 -0600	[thread overview]
Message-ID: <20200827144112.v2.1.I6981f9a9f0c12e60f8038f3b574184f8ffc1b9b5@changeid> (raw)

The i8042_mutex must be held by writers of the AUX and KBD ports, as
well as users of i8042_command. There were a lot of users of
i8042_command that were not calling i8042_lock_chip/i8042_unlock_chip.
This resulted in i8042_commands being issues in between PS/2
transactions.

This change moves the mutex lock into i8042_command and removes the
burden of locking the mutex from the callers.

It is expected that the i8042_mutex is locked before calling
i8042_aux_write or i8042_kbd_write. This is currently done by the PS/2
layer via ps2_begin_command and ps2_end_command. Other modules
(serio_raw) do not currently lock the mutex, so there is still a
possibility for intermixed commands.

Link: https://lore.kernel.org/linux-input/CAHQZ30ANTeM-pgdYZ4AbgxsnevBJnJgKZ1Kg+Uy8oSXZUvz=og@mail.gmail.com
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---
Tested this on a device with only a PS/2 keyboard. I was able to do
1200+ suspend/resume cycles.

Also tested this on a device with a PS/2 keyboard and a PS/2 mouse.
I was able to do 250+ iterations with out problems.

Changes in v2:
- Fixed bad indent
- Added Link: tag
- Removed left over rc variable

 drivers/input/serio/i8042.c         | 29 ++++++++++++++---------------
 drivers/leds/leds-clevo-mail.c      |  9 ---------
 drivers/platform/x86/acer-wmi.c     |  2 --
 drivers/platform/x86/amilo-rfkill.c |  6 +-----
 include/linux/i8042.h               | 10 ----------
 5 files changed, 15 insertions(+), 41 deletions(-)

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 0dddf273afd94..65ca6b47f41e8 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -137,8 +137,7 @@ static DEFINE_SPINLOCK(i8042_lock);
 
 /*
  * Writers to AUX and KBD ports as well as users issuing i8042_command
- * directly should acquire i8042_mutex (by means of calling
- * i8042_lock_chip() and i8042_unlock_ship() helpers) to ensure that
+ * directly should acquire i8042_mutex to ensure that
  * they do not disturb each other (unfortunately in many i8042
  * implementations write to one of the ports will immediately abort
  * command that is being processed by another port).
@@ -173,18 +172,6 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id);
 static bool (*i8042_platform_filter)(unsigned char data, unsigned char str,
 				     struct serio *serio);
 
-void i8042_lock_chip(void)
-{
-	mutex_lock(&i8042_mutex);
-}
-EXPORT_SYMBOL(i8042_lock_chip);
-
-void i8042_unlock_chip(void)
-{
-	mutex_unlock(&i8042_mutex);
-}
-EXPORT_SYMBOL(i8042_unlock_chip);
-
 int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
 					struct serio *serio))
 {
@@ -343,10 +330,14 @@ int i8042_command(unsigned char *param, int command)
 	unsigned long flags;
 	int retval;
 
+	mutex_lock(&i8042_mutex);
+
 	spin_lock_irqsave(&i8042_lock, flags);
 	retval = __i8042_command(param, command);
 	spin_unlock_irqrestore(&i8042_lock, flags);
 
+	mutex_unlock(&i8042_mutex);
+
 	return retval;
 }
 EXPORT_SYMBOL(i8042_command);
@@ -379,10 +370,18 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 static int i8042_aux_write(struct serio *serio, unsigned char c)
 {
 	struct i8042_port *port = serio->port_data;
+	unsigned long flags;
+	int retval = 0;
+
+	spin_lock_irqsave(&i8042_lock, flags);
 
-	return i8042_command(&c, port->mux == -1 ?
+	retval = __i8042_command(&c, port->mux == -1 ?
 					I8042_CMD_AUX_SEND :
 					I8042_CMD_MUX_SEND + port->mux);
+
+	spin_unlock_irqrestore(&i8042_lock, flags);
+
+	return retval;
 }
 
 
diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c
index f512e99b976b1..6c3d7e54f95cf 100644
--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -95,17 +95,12 @@ MODULE_DEVICE_TABLE(dmi, clevo_mail_led_dmi_table);
 static void clevo_mail_led_set(struct led_classdev *led_cdev,
 				enum led_brightness value)
 {
-	i8042_lock_chip();
-
 	if (value == LED_OFF)
 		i8042_command(NULL, CLEVO_MAIL_LED_OFF);
 	else if (value <= LED_HALF)
 		i8042_command(NULL, CLEVO_MAIL_LED_BLINK_0_5HZ);
 	else
 		i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
-
-	i8042_unlock_chip();
-
 }
 
 static int clevo_mail_led_blink(struct led_classdev *led_cdev,
@@ -114,8 +109,6 @@ static int clevo_mail_led_blink(struct led_classdev *led_cdev,
 {
 	int status = -EINVAL;
 
-	i8042_lock_chip();
-
 	if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) {
 		/* Special case: the leds subsystem requested us to
 		 * chose one user friendly blinking of the LED, and
@@ -142,8 +135,6 @@ static int clevo_mail_led_blink(struct led_classdev *led_cdev,
 		       *delay_on, *delay_off);
 	}
 
-	i8042_unlock_chip();
-
 	return status;
 }
 
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 60c18f21588dd..6cb6f800503b2 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1044,9 +1044,7 @@ static acpi_status WMID_set_u32(u32 value, u32 cap)
 			return AE_BAD_PARAMETER;
 		if (quirks->mailled == 1) {
 			param = value ? 0x92 : 0x93;
-			i8042_lock_chip();
 			i8042_command(&param, 0x1059);
-			i8042_unlock_chip();
 			return 0;
 		}
 		break;
diff --git a/drivers/platform/x86/amilo-rfkill.c b/drivers/platform/x86/amilo-rfkill.c
index 493e169c8f615..c981c6e07ff94 100644
--- a/drivers/platform/x86/amilo-rfkill.c
+++ b/drivers/platform/x86/amilo-rfkill.c
@@ -28,12 +28,8 @@
 static int amilo_a1655_rfkill_set_block(void *data, bool blocked)
 {
 	u8 param = blocked ? A1655_WIFI_OFF : A1655_WIFI_ON;
-	int rc;
 
-	i8042_lock_chip();
-	rc = i8042_command(&param, A1655_WIFI_COMMAND);
-	i8042_unlock_chip();
-	return rc;
+	return i8042_command(&param, A1655_WIFI_COMMAND);
 }
 
 static const struct rfkill_ops amilo_a1655_rfkill_ops = {
diff --git a/include/linux/i8042.h b/include/linux/i8042.h
index 0261e2fb36364..1c081081c161d 100644
--- a/include/linux/i8042.h
+++ b/include/linux/i8042.h
@@ -55,8 +55,6 @@ struct serio;
 
 #if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
 
-void i8042_lock_chip(void);
-void i8042_unlock_chip(void);
 int i8042_command(unsigned char *param, int command);
 int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
 					struct serio *serio));
@@ -65,14 +63,6 @@ int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
 
 #else
 
-static inline void i8042_lock_chip(void)
-{
-}
-
-static inline void i8042_unlock_chip(void)
-{
-}
-
 static inline int i8042_command(unsigned char *param, int command)
 {
 	return -ENODEV;
-- 
2.28.0.297.g1956fa8f8d-goog


             reply	other threads:[~2020-08-27 20:42 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-27 20:41 Raul E Rangel [this message]
2020-08-27 20:41 ` [PATCH v2 2/2] Input: i8042 - Lock i8042_mutex before flushing Raul E Rangel
2020-10-28 20:35 ` [PATCH v2 1/2] Input: i8042 - Prevent intermixing i8042 commands Hans de Goede
2020-12-07  6:40 ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200827144112.v2.1.I6981f9a9f0c12e60f8038f3b574184f8ffc1b9b5@changeid \
    --to=rrangel@chromium.org \
    --cc=Shirish.S@amd.com \
    --cc=andy@infradead.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dmurphy@ti.com \
    --cc=dvhart@infradead.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=jlee@suse.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rajatja@google.com \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).