[PATCH AUTOSEL 5.4 01/23] HID: uclogic: Add ID for Trust Flex Design Tablet

[PATCH AUTOSEL 5.4 01/23] HID: uclogic: Add ID for Trust Flex Design Tablet

[Sasha Levin]

From: Martijn van de Streek <martijn@zeewinde.xyz>

[ Upstream commit 022fc5315b7aff69d3df2c953b892a6232642d50 ]

The Trust Flex Design Tablet has an UGTizer USB ID and requires the same
initialization as the UGTizer GP0610 to be detected as a graphics tablet
instead of a mouse.

Signed-off-by: Martijn van de Streek <martijn@zeewinde.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h            | 1 +
 drivers/hid/hid-uclogic-core.c   | 2 ++
 drivers/hid/hid-uclogic-params.c | 2 ++
 3 files changed, 5 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 7363d0b488bd8..62b8802a534e8 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1292,6 +1292,7 @@
 
 #define USB_VENDOR_ID_UGTIZER			0x2179
 #define USB_DEVICE_ID_UGTIZER_TABLET_GP0610	0x0053
+#define USB_DEVICE_ID_UGTIZER_TABLET_GT5040	0x0077
 
 #define USB_VENDOR_ID_VIEWSONIC			0x0543
 #define USB_DEVICE_ID_VIEWSONIC_PD1011		0xe621
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index 86b568037cb8a..8e9c9e646cb7d 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -385,6 +385,8 @@ static const struct hid_device_id uclogic_devices[] = {
 				USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER,
 				USB_DEVICE_ID_UGTIZER_TABLET_GP0610) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER,
+				USB_DEVICE_ID_UGTIZER_TABLET_GT5040) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
 				USB_DEVICE_ID_UGEE_TABLET_G5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 78a364ae2f685..e80c812f44a77 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -997,6 +997,8 @@ int uclogic_params_init(struct uclogic_params *params,
 		break;
 	case VID_PID(USB_VENDOR_ID_UGTIZER,
 		     USB_DEVICE_ID_UGTIZER_TABLET_GP0610):
+	case VID_PID(USB_VENDOR_ID_UGTIZER,
+		     USB_DEVICE_ID_UGTIZER_TABLET_GT5040):
 	case VID_PID(USB_VENDOR_ID_UGEE,
 		     USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540):
 	case VID_PID(USB_VENDOR_ID_UGEE,
-- 
2.27.0

[PATCH AUTOSEL 5.4 02/23] HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 3c785a06dee99501a17f8e8cf29b2b7e3f1e94ea ]

The usb-hid keyboard-dock for the Acer Switch 10 SW5-012 model declares
an application and hid-usage page of 0x0088 for the INPUT(4) report which
it sends. This reports contains 2 8-bit fields which are declared as
HID_MAIN_ITEM_VARIABLE.

The keyboard-touchpad combo never actually generates this report, except
when the touchpad is toggled on/off with the Fn + F7 hotkey combo. The
toggle on/off is handled inside the keyboard-dock, when the touchpad is
toggled off it simply stops sending events.

When the touchpad is toggled on/off an INPUT(4) report is generated with
the first content byte set to 120/121, before this commit the kernel
would report this as ABS_MISC 120/121 events.

Patch the descriptor to replace the HID_MAIN_ITEM_VARIABLE with
HID_MAIN_ITEM_RELATIVE (because no key-presss release events are send)
and add mappings for the 0x00880078 and 0x00880079 usages to generate
touchpad on/off key events when the touchpad is toggled on/off.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ite.c | 61 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-ite.c b/drivers/hid/hid-ite.c
index 044a93f3c1178..742c052b0110a 100644
--- a/drivers/hid/hid-ite.c
+++ b/drivers/hid/hid-ite.c
@@ -11,6 +11,48 @@
 
 #include "hid-ids.h"
 
+#define QUIRK_TOUCHPAD_ON_OFF_REPORT		BIT(0)
+
+static __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize)
+{
+	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+
+	if (quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) {
+		if (*rsize == 188 && rdesc[162] == 0x81 && rdesc[163] == 0x02) {
+			hid_info(hdev, "Fixing up ITE keyboard report descriptor\n");
+			rdesc[163] = HID_MAIN_ITEM_RELATIVE;
+		}
+	}
+
+	return rdesc;
+}
+
+static int ite_input_mapping(struct hid_device *hdev,
+		struct hid_input *hi, struct hid_field *field,
+		struct hid_usage *usage, unsigned long **bit,
+		int *max)
+{
+
+	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+
+	if ((quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) &&
+	    (usage->hid & HID_USAGE_PAGE) == 0x00880000) {
+		if (usage->hid == 0x00880078) {
+			/* Touchpad on, userspace expects F22 for this */
+			hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F22);
+			return 1;
+		}
+		if (usage->hid == 0x00880079) {
+			/* Touchpad off, userspace expects F23 for this */
+			hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F23);
+			return 1;
+		}
+		return -1;
+	}
+
+	return 0;
+}
+
 static int ite_event(struct hid_device *hdev, struct hid_field *field,
 		     struct hid_usage *usage, __s32 value)
 {
@@ -37,13 +79,27 @@ static int ite_event(struct hid_device *hdev, struct hid_field *field,
 	return 0;
 }
 
+static int ite_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	hid_set_drvdata(hdev, (void *)id->driver_data);
+
+	ret = hid_open_report(hdev);
+	if (ret)
+		return ret;
+
+	return hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+}
+
 static const struct hid_device_id ite_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_258A, USB_DEVICE_ID_258A_6A88) },
 	/* ITE8595 USB kbd ctlr, with Synaptics touchpad connected to it. */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_SYNAPTICS,
-		     USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012) },
+		     USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
 	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_SYNAPTICS,
@@ -55,6 +111,9 @@ MODULE_DEVICE_TABLE(hid, ite_devices);
 static struct hid_driver ite_driver = {
 	.name = "itetech",
 	.id_table = ite_devices,
+	.probe = ite_probe,
+	.report_fixup = ite_report_fixup,
+	.input_mapping = ite_input_mapping,
 	.event = ite_event,
 };
 module_hid_driver(ite_driver);
-- 
2.27.0

[PATCH AUTOSEL 5.4 03/23] HID: cypress: Support Varmilo Keyboards' media hotkeys

[Sasha Levin]

From: Frank Yang <puilp0502@gmail.com>

[ Upstream commit 652f3d00de523a17b0cebe7b90debccf13aa8c31 ]

The Varmilo VA104M Keyboard (04b4:07b1, reported as Varmilo Z104M)
exposes media control hotkeys as a USB HID consumer control device, but
these keys do not work in the current (5.8-rc1) kernel due to the
incorrect HID report descriptor. Fix the problem by modifying the
internal HID report descriptor.

More specifically, the keyboard report descriptor specifies the
logical boundary as 572~10754 (0x023c ~ 0x2a02) while the usage
boundary is specified as 0~10754 (0x00 ~ 0x2a02). This results in an
incorrect interpretation of input reports, causing inputs to be ignored.
By setting the Logical Minimum to zero, we align the logical boundary
with the Usage ID boundary.

Some notes:

* There seem to be multiple variants of the VA104M keyboard. This
  patch specifically targets 04b4:07b1 variant.

* The device works out-of-the-box on Windows platform with the generic
  consumer control device driver (hidserv.inf). This suggests that
  Windows either ignores the Logical Minimum/Logical Maximum or
  interprets the Usage ID assignment differently from the linux
  implementation; Maybe there are other devices out there that only
  works on Windows due to this problem?

Signed-off-by: Frank Yang <puilp0502@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-cypress.c | 44 ++++++++++++++++++++++++++++++++++-----
 drivers/hid/hid-ids.h     |  2 ++
 2 files changed, 41 insertions(+), 5 deletions(-)

diff --git a/drivers/hid/hid-cypress.c b/drivers/hid/hid-cypress.c
index a50ba4a4a1d71..b88f889b3932e 100644
--- a/drivers/hid/hid-cypress.c
+++ b/drivers/hid/hid-cypress.c
@@ -23,19 +23,17 @@
 #define CP_2WHEEL_MOUSE_HACK		0x02
 #define CP_2WHEEL_MOUSE_HACK_ON		0x04
 
+#define VA_INVAL_LOGICAL_BOUNDARY	0x08
+
 /*
  * Some USB barcode readers from cypress have usage min and usage max in
  * the wrong order
  */
-static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+static __u8 *cp_rdesc_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
-	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
 	unsigned int i;
 
-	if (!(quirks & CP_RDESC_SWAPPED_MIN_MAX))
-		return rdesc;
-
 	if (*rsize < 4)
 		return rdesc;
 
@@ -48,6 +46,40 @@ static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 	return rdesc;
 }
 
+static __u8 *va_logical_boundary_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	/*
+	 * Varmilo VA104M (with VID Cypress and device ID 07B1) incorrectly
+	 * reports Logical Minimum of its Consumer Control device as 572
+	 * (0x02 0x3c). Fix this by setting its Logical Minimum to zero.
+	 */
+	if (*rsize == 25 &&
+			rdesc[0] == 0x05 && rdesc[1] == 0x0c &&
+			rdesc[2] == 0x09 && rdesc[3] == 0x01 &&
+			rdesc[6] == 0x19 && rdesc[7] == 0x00 &&
+			rdesc[11] == 0x16 && rdesc[12] == 0x3c && rdesc[13] == 0x02) {
+		hid_info(hdev,
+			 "fixing up varmilo VA104M consumer control report descriptor\n");
+		rdesc[12] = 0x00;
+		rdesc[13] = 0x00;
+	}
+	return rdesc;
+}
+
+static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+
+	if (quirks & CP_RDESC_SWAPPED_MIN_MAX)
+		rdesc = cp_rdesc_fixup(hdev, rdesc, rsize);
+	if (quirks & VA_INVAL_LOGICAL_BOUNDARY)
+		rdesc = va_logical_boundary_fixup(hdev, rdesc, rsize);
+
+	return rdesc;
+}
+
 static int cp_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
@@ -128,6 +160,8 @@ static const struct hid_device_id cp_devices[] = {
 		.driver_data = CP_RDESC_SWAPPED_MIN_MAX },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE),
 		.driver_data = CP_2WHEEL_MOUSE_HACK },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_VARMILO_VA104M_07B1),
+		.driver_data = VA_INVAL_LOGICAL_BOUNDARY },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, cp_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 62b8802a534e8..b2c86403e43b1 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -337,6 +337,8 @@
 #define USB_DEVICE_ID_CYPRESS_BARCODE_4	0xed81
 #define USB_DEVICE_ID_CYPRESS_TRUETOUCH	0xc001
 
+#define USB_DEVICE_ID_CYPRESS_VARMILO_VA104M_07B1   0X07b1
+
 #define USB_VENDOR_ID_DATA_MODUL	0x7374
 #define USB_VENDOR_ID_DATA_MODUL_EASYMAXTOUCH	0x1201
 
-- 
2.27.0

[PATCH AUTOSEL 5.4 04/23] HID: add support for Sega Saturn

[Sasha Levin]

From: Jiri Kosina <jkosina@suse.cz>

[ Upstream commit 1811977cb11354aef8cbd13e35ff50db716728a4 ]

This device needs HID_QUIRK_MULTI_INPUT in order to be presented to userspace
in a consistent way.

Reported-and-tested-by: David Gámiz Jiménez <david.gamiz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h    | 1 +
 drivers/hid/hid-quirks.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b2c86403e43b1..d173badafcf1f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -489,6 +489,7 @@
 #define USB_DEVICE_ID_PENPOWER		0x00f4
 
 #define USB_VENDOR_ID_GREENASIA		0x0e8f
+#define USB_DEVICE_ID_GREENASIA_DUAL_SAT_ADAPTOR 0x3010
 #define USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD	0x3013
 
 #define USB_VENDOR_ID_GRETAGMACBETH	0x0971
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 0440e2f6e8a3c..abee4e950a4ee 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -83,6 +83,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_FUTABA, USB_DEVICE_ID_LED_DISPLAY), HID_QUIRK_NO_INIT_REPORTS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_SAT_ADAPTOR), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
-- 
2.27.0

[PATCH AUTOSEL 5.4 05/23] Input: i8042 - allow insmod to succeed on devices without an i8042 controller

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit b1884583fcd17d6a1b1bba94bbb5826e6b5c6e17 ]

The i8042 module exports several symbols which may be used by other
modules.

Before this commit it would refuse to load (when built as a module itself)
on systems without an i8042 controller.

This is a problem specifically for the asus-nb-wmi module. Many Asus
laptops support the Asus WMI interface. Some of them have an i8042
controller and need to use i8042_install_filter() to filter some kbd
events. Other models do not have an i8042 controller (e.g. they use an
USB attached kbd).

Before this commit the asus-nb-wmi driver could not be loaded on Asus
models without an i8042 controller, when the i8042 code was built as
a module (as Arch Linux does) because the module_init function of the
i8042 module would fail with -ENODEV and thus the i8042_install_filter
symbol could not be loaded.

This commit fixes this by exiting from module_init with a return code
of 0 if no controller is found.  It also adds a i8042_present bool to
make the module_exit function a no-op in this case and also adds a
check for i8042_present to the exported i8042_command function.

The latter i8042_present check should not really be necessary because
when builtin that function can already be used on systems without
an i8042 controller, but better safe then sorry.

Reported-and-tested-by: Marius Iacob <themariusus@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 20ff2bed3917a..5a89c1cfdaa97 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -121,6 +121,7 @@ module_param_named(unmask_kbd_data, i8042_unmask_kbd_data, bool, 0600);
 MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive data) of normally sanitize-filtered kbd data traffic debug log [pre-condition: i8042.debug=1 enabled]");
 #endif
 
+static bool i8042_present;
 static bool i8042_bypass_aux_irq_test;
 static char i8042_kbd_firmware_id[128];
 static char i8042_aux_firmware_id[128];
@@ -341,6 +342,9 @@ int i8042_command(unsigned char *param, int command)
 	unsigned long flags;
 	int retval;
 
+	if (!i8042_present)
+		return -1;
+
 	spin_lock_irqsave(&i8042_lock, flags);
 	retval = __i8042_command(param, command);
 	spin_unlock_irqrestore(&i8042_lock, flags);
@@ -1609,12 +1613,15 @@ static int __init i8042_init(void)
 
 	err = i8042_platform_init();
 	if (err)
-		return err;
+		return (err == -ENODEV) ? 0 : err;
 
 	err = i8042_controller_check();
 	if (err)
 		goto err_platform_exit;
 
+	/* Set this before creating the dev to allow i8042_command to work right away */
+	i8042_present = true;
+
 	pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, NULL, 0);
 	if (IS_ERR(pdev)) {
 		err = PTR_ERR(pdev);
@@ -1633,6 +1640,9 @@ static int __init i8042_init(void)
 
 static void __exit i8042_exit(void)
 {
+	if (!i8042_present)
+		return;
+
 	platform_device_unregister(i8042_platform_device);
 	platform_driver_unregister(&i8042_driver);
 	i8042_platform_exit();
-- 
2.27.0

[PATCH AUTOSEL 5.4 06/23] HID: hid-sensor-hub: Fix issue with devices with no report ID

[Sasha Levin]

From: Pablo Ceballos <pceballos@google.com>

[ Upstream commit 34a9fa2025d9d3177c99351c7aaf256c5f50691f ]

Some HID devices don't use a report ID because they only have a single
report. In those cases, the report ID in struct hid_report will be zero
and the data for the report will start at the first byte, so don't skip
over the first byte.

Signed-off-by: Pablo Ceballos <pceballos@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-sensor-hub.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index 94c7398b5c279..3dd7d32467378 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -483,7 +483,8 @@ static int sensor_hub_raw_event(struct hid_device *hdev,
 		return 1;
 
 	ptr = raw_data;
-	ptr++; /* Skip report id */
+	if (report->id)
+		ptr++; /* Skip report id */
 
 	spin_lock_irqsave(&pdata->lock, flags);
 
-- 
2.27.0

[PATCH AUTOSEL 5.4 08/23] HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices

[Sasha Levin]

From: Chris Ye <lzye@google.com>

[ Upstream commit f59ee399de4a8ca4d7d19cdcabb4b63e94867f09 ]

Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to
be set explicitly with this flag.

Signed-off-by: Chris Ye <lzye@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h    | 4 ++++
 drivers/hid/hid-quirks.c | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index d173badafcf1f..6b1c26e6fa4a3 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -451,6 +451,10 @@
 #define USB_VENDOR_ID_FRUCTEL	0x25B6
 #define USB_DEVICE_ID_GAMETEL_MT_MODE	0x0002
 
+#define USB_VENDOR_ID_GAMEVICE	0x27F8
+#define USB_DEVICE_ID_GAMEVICE_GV186	0x0BBE
+#define USB_DEVICE_ID_GAMEVICE_KISHI	0x0BBF
+
 #define USB_VENDOR_ID_GAMERON		0x0810
 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR	0x0001
 #define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR	0x0002
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index abee4e950a4ee..60d188a704e5e 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -85,6 +85,10 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_FUTABA, USB_DEVICE_ID_LED_DISPLAY), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_SAT_ADAPTOR), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD), HID_QUIRK_MULTI_INPUT },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_GAMEVICE, USB_DEVICE_ID_GAMEVICE_GV186),
+		HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMEVICE, USB_DEVICE_ID_GAMEVICE_KISHI),
+		HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING), HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
-- 
2.27.0

[PATCH AUTOSEL 5.4 11/23] HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c27168a04a438a457c100253b1aaf0c779218aae ]

Like the MX5000 and MX5500 quad/bluetooth keyboards the Dinovo Edge also
needs the HIDPP_CONSUMER_VENDOR_KEYS quirk for some special keys to work.
Specifically without this the "Phone" and the 'A' - 'D' Smart Keys do not
send any events.

In addition to fixing these keys not sending any events, adding the
Bluetooth match, so that hid-logitech-hidpp is used instead of the
generic HID driver, also adds battery monitoring support when the
keyboard is connected over Bluetooth.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index e49d36de07968..919551ed5809c 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -3789,6 +3789,9 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* Keyboard MX5000 (Bluetooth-receiver in HID proxy mode) */
 	  LDJ_DEVICE(0xb305),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
+	{ /* Dinovo Edge (Bluetooth-receiver in HID proxy mode) */
+	  LDJ_DEVICE(0xb309),
+	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
 	{ /* Keyboard MX5500 (Bluetooth-receiver in HID proxy mode) */
 	  LDJ_DEVICE(0xb30b),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
@@ -3831,6 +3834,9 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* MX5000 keyboard over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb305),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
+	{ /* Dinovo Edge keyboard over Bluetooth */
+	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb309),
+	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
 	{ /* MX5500 keyboard over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb30b),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
-- 
2.27.0

[PATCH AUTOSEL 5.4 12/23] HID: Add Logitech Dinovo Edge battery quirk

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 7940fb035abd88040d56be209962feffa33b03d0 ]

The battery status is also being reported by the logitech-hidpp driver,
so ignore the standard HID battery status to avoid reporting the same
info twice.

Note the logitech-hidpp battery driver provides more info, such as properly
differentiating between charging and discharging. Also the standard HID
battery info seems to be wrong, reporting a capacity of just 26% after
fully charging the device.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h   | 1 +
 drivers/hid/hid-input.c | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 6b1c26e6fa4a3..2aa810665a78c 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -750,6 +750,7 @@
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e
 #define USB_DEVICE_ID_LOGITECH_T651	0xb00c
+#define USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD	0xb309
 #define USB_DEVICE_ID_LOGITECH_C007	0xc007
 #define USB_DEVICE_ID_LOGITECH_C077	0xc077
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index b2bff932c524f..b2da8476d0d30 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -319,6 +319,9 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ASUSTEK,
 		USB_DEVICE_ID_ASUSTEK_T100CHI_KEYBOARD),
 	  HID_BATTERY_QUIRK_IGNORE },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD),
+	  HID_BATTERY_QUIRK_IGNORE },
 	{}
 };
 
-- 
2.27.0