From: Alistair Francis <alistair@alistair23.me>
To: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
linux-imx@nxp.com, kernel@pengutronix.de
Cc: linux-kernel@vger.kernel.org, alistair23@gmail.com,
Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v2 6/6] arch/arm: reMarkable2: Enable wacom_i2c
Date: Wed, 20 Jan 2021 22:56:43 -0800 [thread overview]
Message-ID: <20210121065643.342-7-alistair@alistair23.me> (raw)
In-Reply-To: <20210121065643.342-1-alistair@alistair23.me>
Enable the wacom_i2c touchscreen for the reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 41 +++++++++++++++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
2 files changed, 42 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index fba55a0e028a..8052d884a5e5 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -150,6 +150,30 @@ &dma_apbh {
status = "disabled";
};
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ digitizer: wacom-i2c@9 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_wacom>;
+ pinctrl-1 = <&pinctrl_wacom>;
+ compatible = "wacom,wacom-i2c";
+ reg = <0x09>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 2>;
+ flip-tilt-x;
+ flip-tilt-y;
+ flip-pos-x;
+ flip-pos-y;
+ flip-distance;
+ vdd-supply = <®_digitizer>;
+ };
+};
+
&sdma {
status = "okay";
};
@@ -221,6 +245,16 @@ &wdog1 {
};
&iomuxc_lpsr {
+ pinctrl_wacom: wacomgrp {
+ fsl,pins = <
+ /*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x00000074 /* WACOM RESET */
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x00000034 /* WACOM INT */
+ MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x00000074 /* PDCTB */
+ /*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x00000014 /* FWE */
+ /*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x00000014 /* WACOM PWR ENABLE */
+ >;
+ };
+
pinctrl_digitizer_reg: digitizerreggrp {
fsl,pins = <
/* DIGITIZER_PWR_EN */
@@ -236,6 +270,13 @@ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x59
>;
};
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index fa9229616106..2fc8dc6a8b0a 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -167,6 +167,7 @@ CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_ILI210X=y
+CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
--
2.29.2
next prev parent reply other threads:[~2021-01-21 7:02 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 6:56 [PATCH v2 0/6] Add Wacom I2C support to rM2 Alistair Francis
2021-01-21 6:56 ` [PATCH v2 1/6] devicetree/bindings: Initial commit of wacom,wacom-i2c Alistair Francis
2021-01-22 15:49 ` [PATCH v2 1/6] devicetree/bindings: Initial commit of wacom, wacom-i2c Marco Felsch
2021-01-21 6:56 ` [PATCH v2 2/6] input/touchscreen: Add device tree support to wacom_i2c Alistair Francis
2021-01-22 15:57 ` Marco Felsch
2021-01-21 6:56 ` [PATCH v2 3/6] touchscreen/wacom_i2c: Add support for distance and tilt x/y Alistair Francis
2021-01-22 16:00 ` Marco Felsch
2021-01-21 6:56 ` [PATCH v2 4/6] touchscreen/wacom_i2c: Clean up the query device fields Alistair Francis
2021-01-21 6:56 ` [PATCH v2 5/6] touchscreen/wacom_i2c: Add support for vdd regulator Alistair Francis
2021-01-21 6:56 ` Alistair Francis [this message]
2021-01-22 15:32 ` [PATCH v2 6/6] arch/arm: reMarkable2: Enable wacom_i2c Marco Felsch
2021-01-23 8:04 ` Alistair Francis
2021-01-22 16:14 ` [PATCH v2 0/6] Add Wacom I2C support to rM2 Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210121065643.342-7-alistair@alistair23.me \
--to=alistair@alistair23.me \
--cc=alistair23@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).