linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff LaBundy <jeff@labundy.com>
To: dmitry.torokhov@gmail.com, robh+dt@kernel.org
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	Jeff LaBundy <jeff@labundy.com>
Subject: [PATCH v3 0/4] Add support for Azoteq IQS626A
Date: Mon,  1 Mar 2021 17:49:24 -0600	[thread overview]
Message-ID: <20210301234928.4298-1-jeff@labundy.com> (raw)

This series introduces support for the Azoteq IQS626A capacitive touch
controller, a highly flexible multifunction sensor targeting wearable
applications. It is a close cousin to the IQS269A with the following key
differences:

 - Channel count increases from 8 to 14.
 - Channels are assigned dedicated functions as follows:
   - ULP (ultra-low power): a single channel that continues to be sampled
     during the device's lowest-power sensing mode for wake-up signaling.
   - Trackpad: a group of 6 or 9 channels forming a capacitive trackpad with
     gesture support.
   - Generic: 3 independent channels capable of capacitive or inductive
     sensing, plus much more.
   - Hall: a single channel leveraging a pair of internal Hall-effect plates
     serving lid or dock detection.
 - Each channel (or group of channels) has a unique collection of configurable
   parameters rather than common parameters for every channel.

Channels and events reported by the channels are configured using the device
tree, similar to what was done for the IQS269A.

Also included are some preparatory patches that move the touchscreen helper
functions into the core input directory, allowing them to be leveraged by
multimodal devices like the IQS626A.

A demo is shown in the following video: https://youtu.be/n0Q5BXYFIgI

Jeff LaBundy (4):
  Input: touchscreen - move helper functions to core
  Input: touchscreen - broaden use-cases described in comments
  dt-bindings: input: Add bindings for Azoteq IQS626A
  Input: Add support for Azoteq IQS626A

 .../devicetree/bindings/input/iqs626a.yaml    |  843 ++++++++
 drivers/input/Makefile                        |    1 +
 drivers/input/misc/Kconfig                    |   11 +
 drivers/input/misc/Makefile                   |    1 +
 drivers/input/misc/iqs626a.c                  | 1838 +++++++++++++++++
 .../of_touchscreen.c => touchscreen.c}        |   13 +-
 drivers/input/touchscreen/Kconfig             |    4 -
 drivers/input/touchscreen/Makefile            |    1 -
 8 files changed, 2701 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/iqs626a.yaml
 create mode 100644 drivers/input/misc/iqs626a.c
 rename drivers/input/{touchscreen/of_touchscreen.c => touchscreen.c} (93%)

--
2.17.1


             reply	other threads:[~2021-03-02 12:53 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-01 23:49 Jeff LaBundy [this message]
2021-03-01 23:49 ` [PATCH v3 1/4] Input: touchscreen - move helper functions to core Jeff LaBundy
2021-03-22 23:46   ` Dmitry Torokhov
2021-03-01 23:49 ` [PATCH v3 2/4] Input: touchscreen - broaden use-cases described in comments Jeff LaBundy
2021-03-22 23:46   ` Dmitry Torokhov
2021-03-01 23:49 ` [PATCH v3 3/4] dt-bindings: input: Add bindings for Azoteq IQS626A Jeff LaBundy
2021-03-22 23:47   ` Dmitry Torokhov
2021-03-01 23:49 ` [PATCH v3 4/4] Input: Add support " Jeff LaBundy
2021-03-22 23:47   ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210301234928.4298-1-jeff@labundy.com \
    --to=jeff@labundy.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).