[PATCH AUTOSEL 5.11 17/52] HID: i2c-hid: Add I2C_HID_QUIRK_NO_IRQ_AFTER_RESET for ITE8568 EC on Voyo Winpad A15

[PATCH AUTOSEL 5.11 17/52] HID: i2c-hid: Add I2C_HID_QUIRK_NO_IRQ_AFTER_RESET for ITE8568 EC on Voyo Winpad A15

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit fc6a31b00739356809dd566e16f2c4325a63285d ]

The ITE8568 EC on the Voyo Winpad A15 presents itself as an I2C-HID
attached keyboard and mouse (which seems to never send any events).

This needs the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk, otherwise we get
the following errors:

[ 3688.770850] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3694.915865] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3701.059717] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3707.205944] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3708.227940] i2c_hid i2c-ITE8568:00: can't add hid device: -61
[ 3708.236518] i2c_hid: probe of i2c-ITE8568:00 failed with error -61

Which leads to a significant boot delay.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h              | 2 ++
 drivers/hid/i2c-hid/i2c-hid-core.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 5ba0aa1d2335..b60279aaed43 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -641,6 +641,8 @@
 #define USB_DEVICE_ID_INNEX_GENESIS_ATARI	0x4745
 
 #define USB_VENDOR_ID_ITE               0x048d
+#define I2C_VENDOR_ID_ITE		0x103c
+#define I2C_DEVICE_ID_ITE_VOYO_WINPAD_A15	0x184f
 #define USB_DEVICE_ID_ITE_LENOVO_YOGA   0x8386
 #define USB_DEVICE_ID_ITE_LENOVO_YOGA2  0x8350
 #define I2C_DEVICE_ID_ITE_LENOVO_LEGION_Y720	0x837a
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index bfe716d7ea44..c586acf2fc0b 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -171,6 +171,8 @@ static const struct i2c_hid_quirks {
 		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
 	{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
 		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
+	{ I2C_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_VOYO_WINPAD_A15,
+		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
 	{ I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_3118,
 		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
 	{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
-- 
2.30.1

[PATCH AUTOSEL 5.11 22/52] HID: logitech-dj: add support for the new lightspeed connection iteration

[Sasha Levin]

From: Filipe Laíns <lains@riseup.net>

[ Upstream commit fab3a95654eea01d6b0204995be8b7492a00d001 ]

This new connection type is the new iteration of the Lightspeed
connection and will probably be used in some of the newer gaming
devices. It is currently use in the G Pro X Superlight.

This patch should be backported to older versions, as currently the
driver will panic when seing the unsupported connection. This isn't
an issue when using the receiver that came with the device, as Logitech
has been using different PIDs when they change the connection type, but
is an issue when using a generic receiver (well, generic Lightspeed
receiver), which is the case of the one in the Powerplay mat. Currently,
the only generic Ligthspeed receiver we support, and the only one that
exists AFAIK, is ther Powerplay.

As it stands, the driver will panic when seeing a G Pro X Superlight
connected to the Powerplay receiver and won't send any input events to
userspace! The kernel will warn about this so the issue should be easy
to identify, but it is still very worrying how hard it will fail :(

[915977.398471] logitech-djreceiver 0003:046D:C53A.0107: unusable device of type UNKNOWN (0x0f) connected on slot 1

Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-dj.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 45e7e0bdd382..1401ee2067ca 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -994,7 +994,12 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
 		workitem.reports_supported |= STD_KEYBOARD;
 		break;
 	case 0x0d:
-		device_type = "eQUAD Lightspeed 1_1";
+		device_type = "eQUAD Lightspeed 1.1";
+		logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
+		workitem.reports_supported |= STD_KEYBOARD;
+		break;
+	case 0x0f:
+		device_type = "eQUAD Lightspeed 1.2";
 		logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
 		workitem.reports_supported |= STD_KEYBOARD;
 		break;
-- 
2.30.1

[PATCH AUTOSEL 5.11 23/52] HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit b7c20f3815985570ac71c39b1a3e68c201109578 ]

The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids
as the Acer One S1003 keyboard-dock. Yet they are not entirely the same:

1. The S1003 keyboard-dock has the same report descriptors as the
S1002 keyboard-dock (which has different USB-ids)

2. The Acer Aspire Switch 10E's keyboard-dock has different
report descriptors from the S1002/S1003 keyboard docks and it
sends 0x00880078 / 0x00880079 usage events when the touchpad is
toggled on/off (which is handled internally).

This means that all Acer kbd-docks handled by the hid-ite.c drivers
report their touchpad being toggled on/off through these custom
usage-codes with the exception of the S1003 dock, which likely is
a bug of that dock.

Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003
usb-id so that the touchpad toggling will get reported to userspace on
the Aspire Switch 10E.

Since the Aspire Switch 10E's kbd-dock has different report-descriptors,
this also requires adding support for fixing those to ite_report_fixup().

Setting the quirk will also cause ite_report_fixup() to hit the
S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock
never generates any input-reports for the fixed up part of the
descriptors this does not matter; and if there are versions out there
which do actually send input-reports for the touchpad-toggle then the
fixup should actually help to make things work.

This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ite.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/hid-ite.c b/drivers/hid/hid-ite.c
index 22bfbebceaf4..14fc068affad 100644
--- a/drivers/hid/hid-ite.c
+++ b/drivers/hid/hid-ite.c
@@ -23,11 +23,16 @@ static __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int
 			hid_info(hdev, "Fixing up Acer Sw5-012 ITE keyboard report descriptor\n");
 			rdesc[163] = HID_MAIN_ITEM_RELATIVE;
 		}
-		/* For Acer One S1002 keyboard-dock */
+		/* For Acer One S1002/S1003 keyboard-dock */
 		if (*rsize == 188 && rdesc[185] == 0x81 && rdesc[186] == 0x02) {
-			hid_info(hdev, "Fixing up Acer S1002 ITE keyboard report descriptor\n");
+			hid_info(hdev, "Fixing up Acer S1002/S1003 ITE keyboard report descriptor\n");
 			rdesc[186] = HID_MAIN_ITEM_RELATIVE;
 		}
+		/* For Acer Aspire Switch 10E (SW3-016) keyboard-dock */
+		if (*rsize == 210 && rdesc[184] == 0x81 && rdesc[185] == 0x02) {
+			hid_info(hdev, "Fixing up Acer Aspire Switch 10E (SW3-016) ITE keyboard report descriptor\n");
+			rdesc[185] = HID_MAIN_ITEM_RELATIVE;
+		}
 	}
 
 	return rdesc;
@@ -114,7 +119,8 @@ static const struct hid_device_id ite_devices[] = {
 	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
 	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
 		     USB_VENDOR_ID_SYNAPTICS,
-		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003) },
+		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ite_devices);
-- 
2.30.1

[PATCH AUTOSEL 5.11 30/52] Input: applespi - don't wait for responses to commands indefinitely.

[Sasha Levin]

From: Ronald Tschalär <ronald@innovation.ch>

[ Upstream commit 0ce1ac23149c6da939a5926c098c270c58c317a0 ]

The response to a command may never arrive or it may be corrupted (and
hence dropped) for some reason. While exceedingly rare, when it did
happen it blocked all further commands. One way to fix this was to
do a suspend/resume. However, recovering automatically seems like a
nicer option. Hence this puts a time limit (1 sec) on how long we're
willing to wait for a response, after which we assume it got lost.

Signed-off-by: Ronald Tschalär <ronald@innovation.ch>
Link: https://lore.kernel.org/r/20210217190718.11035-1-ronald@innovation.ch
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/applespi.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/input/keyboard/applespi.c b/drivers/input/keyboard/applespi.c
index d22223154177..27e87c45edf2 100644
--- a/drivers/input/keyboard/applespi.c
+++ b/drivers/input/keyboard/applespi.c
@@ -48,6 +48,7 @@
 #include <linux/efi.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
+#include <linux/ktime.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
@@ -409,7 +410,7 @@ struct applespi_data {
 	unsigned int			cmd_msg_cntr;
 	/* lock to protect the above parameters and flags below */
 	spinlock_t			cmd_msg_lock;
-	bool				cmd_msg_queued;
+	ktime_t				cmd_msg_queued;
 	enum applespi_evt_type		cmd_evt_type;
 
 	struct led_classdev		backlight_info;
@@ -729,7 +730,7 @@ static void applespi_msg_complete(struct applespi_data *applespi,
 		wake_up_all(&applespi->drain_complete);
 
 	if (is_write_msg) {
-		applespi->cmd_msg_queued = false;
+		applespi->cmd_msg_queued = 0;
 		applespi_send_cmd_msg(applespi);
 	}
 
@@ -771,8 +772,16 @@ static int applespi_send_cmd_msg(struct applespi_data *applespi)
 		return 0;
 
 	/* check whether send is in progress */
-	if (applespi->cmd_msg_queued)
-		return 0;
+	if (applespi->cmd_msg_queued) {
+		if (ktime_ms_delta(ktime_get(), applespi->cmd_msg_queued) < 1000)
+			return 0;
+
+		dev_warn(&applespi->spi->dev, "Command %d timed out\n",
+			 applespi->cmd_evt_type);
+
+		applespi->cmd_msg_queued = 0;
+		applespi->write_active = false;
+	}
 
 	/* set up packet */
 	memset(packet, 0, APPLESPI_PACKET_SIZE);
@@ -869,7 +878,7 @@ static int applespi_send_cmd_msg(struct applespi_data *applespi)
 		return sts;
 	}
 
-	applespi->cmd_msg_queued = true;
+	applespi->cmd_msg_queued = ktime_get_coarse();
 	applespi->write_active = true;
 
 	return 0;
@@ -1921,7 +1930,7 @@ static int __maybe_unused applespi_resume(struct device *dev)
 	applespi->drain = false;
 	applespi->have_cl_led_on = false;
 	applespi->have_bl_level = 0;
-	applespi->cmd_msg_queued = false;
+	applespi->cmd_msg_queued = 0;
 	applespi->read_active = false;
 	applespi->write_active = false;
 
-- 
2.30.1