Hi, What is the difference between V1, V2 and V3? I think generally you would add a small summary. Comments inline. On Thu, 2020-11-26 at 09:39 +1100, Dean Camera wrote: > Currently the hidraw module can only read and write feature HID > reports on demand, via dedicated ioctls. Input reports are read > from the device through the read() interface, while output reports > are written through the write interface(). > > This is insufficient; it is desirable in many situations to be > able to read and write input and output reports through the > control interface to cover additional scenarios: >   - Reading an input report by its report ID, to get initial state >   - Writing an input report, to set initial input state in the device >   - Reading an output report by its report ID, to obtain current state >   - Writing an output report by its report ID, out of band > > This patch adds these missing ioctl requests to read and write > the remaining HID report types. Note that not all HID backends will > neccesarily support this (e.g. while the USB link layer supports > setting Input reports, others may not). > > Also included are documentation and example updates. The current > hidraw documentation states that feature reports read from the > device does *not* include the report ID, however this is not the > case and the returned report will have its report ID prepended > by conforming HID devices, as the report data sent from the device > over the control endpoint must be indentical in format to those > sent over the regular transport. > > Signed-off-by: Dean Camera > --- >  Documentation/hid/hidraw.rst | 45 ++++++++++++++++++++++++++++++++++-- >  drivers/hid/hidraw.c         | 24 ++++++++++++++++++- >  include/uapi/linux/hidraw.h  |  6 +++++ >  samples/hidraw/hid-example.c |  2 +- >  4 files changed, 73 insertions(+), 4 deletions(-) > > diff --git a/Documentation/hid/hidraw.rst b/Documentation/hid/hidraw.rst > index 4a4a0ba1f362..f41c1f0f6252 100644 > --- a/Documentation/hid/hidraw.rst > +++ b/Documentation/hid/hidraw.rst > @@ -123,8 +123,49 @@ HIDIOCGFEATURE(len): >  This ioctl will request a feature report from the device using the control >  endpoint.  The first byte of the supplied buffer should be set to the report >  number of the requested report.  For devices which do not use numbered > -reports, set the first byte to 0.  The report will be returned starting at > -the first byte of the buffer (ie: the report number is not returned). > +reports, set the first byte to 0.  The returned report buffer will contain > the > +report number in the first byte, followed by the report data read from the > +device.  For devices which do not use numbered reports, the report data will > +begin at the first byte of the returned buffer. > + > +HIDIOCSINPUT(len): > +       Send an Input Report > + > +This ioctl will send an input report to the device, using the control > endpoint. > +In most cases, setting an input HID report on a device is meaningless and has > +no effect, but some devices may choose to use this to set or reset an initial > +state of a report.  The format of the buffer issued with this report is > identical > +to that of HIDIOCSFEATURE. > + > +HIDIOCGINPUT(len): > +       Get an Input Report > + > +This ioctl will request an input report from the device using the control > +endpoint.  This is slower on most devices where a dedicated In endpoint > exists > +for regular input reports, but allows the host to request the value of a > +specific report number.  Typically, this is used to request the initial > states of > +an input report of a device, before an application listens for normal reports > via > +the regular device read() interface.  The format of the buffer issued with > this report > +is identical to that of HIDIOCGFEATURE. I am not sure using the same approach as HIDIOCGFEATURE is a good design choice. The first byte of the supplied buffer is the report ID, but you can set is to 0 if you don't want to use numbered reports. From my understanding, this makes it impossible to use the ioctl with report ID 0, which valid per the HID spec. My suggestion would be to automatically use numbered reports or not depending if the device uses them. A HID endpoint either uses numbered reports or not, it doesn't make much sense to me to let users try to use numbered reports on devices that do not use them or the other way round. But I guess this is a question for Benjamin. I tried to track down the discussion about the addition of the HIDIOCGFEATURE ioctl but from what I saw there was no mention of this design flaw. Am I missing something here? > +HIDIOCSOUTPUT(len): > +       Send an Output Report > + > +This ioctl will send an output report to the device, using the control > endpoint. > +This is slower on most devices where a dedicated Out endpoint exists for > regular > +output reports, but is added for completeness.  Typically, this is used to > set > +the initial states of an output report of a device, before an application > sends > +updates via the regular device write() interface. The format of the buffer > issued > +with this report is identical to that of HIDIOCSFEATURE. > + > +HIDIOCGOUTPUT(len): > +       Get an Output Report > + > +This ioctl will request an output report from the device using the control > +endpoint.  Typically, this is used to retrive the initial state of > +an output report of a device, before an application updates it as necessary > either > +via a HIDIOCSOUTPUT request, or the regular device write() interface.  The > format > +of the buffer issued with this report is identical to that of HIDIOCGFEATURE. >   >  Example >  ------- > diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c > index 2eee5e31c2b7..79faac87a06f 100644 > --- a/drivers/hid/hidraw.c > +++ b/drivers/hid/hidraw.c > @@ -170,7 +170,7 @@ static ssize_t hidraw_write(struct file *file, const char > __user *buffer, size_t >  /* >   * This function performs a Get_Report transfer over the control endpoint >   * per section 7.2.1 of the HID specification, version 1.1.  The first byte > - * of buffer is the report number to request, or 0x0 if the defice does not > + * of buffer is the report number to request, or 0x0 if the device does not >   * use numbered reports. The report_type parameter can be HID_FEATURE_REPORT >   * or HID_INPUT_REPORT. >   */ > @@ -428,6 +428,28 @@ static long hidraw_ioctl(struct file *file, unsigned int > cmd, >                                         break; >                                 } >   > +                               if (_IOC_NR(cmd) == _IOC_NR(HIDIOCSINPUT(0))) > { > +                                       int len = _IOC_SIZE(cmd); > +                                       ret = hidraw_send_report(file, > user_arg, len, HID_INPUT_REPORT); > +                                       break; > +                               } > +                               if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGINPUT(0))) > { > +                                       int len = _IOC_SIZE(cmd); > +                                       ret = hidraw_get_report(file, > user_arg, len, HID_INPUT_REPORT); > +                                       break; > +                               } > + > +                               if (_IOC_NR(cmd) == _IOC_NR(HIDIOCSOUTPUT(0))) > { > +                                       int len = _IOC_SIZE(cmd); > +                                       ret = hidraw_send_report(file, > user_arg, len, HID_OUTPUT_REPORT); > +                                       break; > +                               } > +                               if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGOUTPUT(0))) > { > +                                       int len = _IOC_SIZE(cmd); > +                                       ret = hidraw_get_report(file, > user_arg, len, HID_OUTPUT_REPORT); > +                                       break; > +                               } > + >                                 /* Begin Read-only ioctls. */ >                                 if (_IOC_DIR(cmd) != _IOC_READ) { >                                         ret = -EINVAL; > diff --git a/include/uapi/linux/hidraw.h b/include/uapi/linux/hidraw.h > index 4913539e5bcc..33ebad81720a 100644 > --- a/include/uapi/linux/hidraw.h > +++ b/include/uapi/linux/hidraw.h > @@ -40,6 +40,12 @@ struct hidraw_devinfo { >  #define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len) >  #define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len) >  #define HIDIOCGRAWUNIQ(len)     _IOC(_IOC_READ, 'H', 0x08, len) > +/* The first byte of SINPUT and GINPUT is the report number */ > +#define HIDIOCSINPUT(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x09, len) > +#define HIDIOCGINPUT(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x0A, len) > +/* The first byte of SOUTPUT and GOUTPUT is the report number */ > +#define HIDIOCSOUTPUT(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x0B, len) > +#define HIDIOCGOUTPUT(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x0C, len) >   >  #define HIDRAW_FIRST_MINOR 0 >  #define HIDRAW_MAX_DEVICES 64 > diff --git a/samples/hidraw/hid-example.c b/samples/hidraw/hid-example.c > index 37a0ffcb4d63..0f73ace3c6c3 100644 > --- a/samples/hidraw/hid-example.c > +++ b/samples/hidraw/hid-example.c > @@ -128,7 +128,7 @@ int main(int argc, char **argv) >                 perror("HIDIOCGFEATURE"); >         } else { >                 printf("ioctl HIDIOCGFEATURE returned: %d\n", res); > -               printf("Report data (not containing the report number):\n\t"); This seems unrelated, you did not touch HIDIOCGFEATURE. > +               printf("Report data:\n\t"); >                 for (i = 0; i < res; i++) >                         printf("%hhx ", buf[i]); >                 puts("\n"); -- Filipe Laíns