From: Dmitry Osipenko <digetx@gmail.com>
To: Jiada Wang <jiada_wang@mentor.com>,
nick@shmanahar.org, dmitry.torokhov@gmail.com, jikos@kernel.org,
benjamin.tissoires@redhat.com, bsz@semihalf.com,
rydberg@bitmath.org
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
erosca@de.adit-jv.com, Andrew_Gabbasov@mentor.com
Subject: Re: [PATCH v9 52/55] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status
Date: Wed, 25 Mar 2020 22:35:22 +0300 [thread overview]
Message-ID: <4aeda6f1-25d8-9437-5cd0-560e43dbe081@gmail.com> (raw)
In-Reply-To: <20200325133334.19346-53-jiada_wang@mentor.com>
25.03.2020 16:33, Jiada Wang пишет:
> From: Naveen Chakka <Naveen.Chakka@in.bosch.com>
>
> To know the current communication status of the touch controller during
> runtime, sysfs interface is added
>
> sysfs interface: /sys/class/i2c-dev/i2c-*/device/*/touch_dev_stat
> Executing the above sysfs interface provides two output values
>
> 1)Status of the touch device
> value 0 represents device is inactive
> value 1 represents device is active
> 2)Error counter
> value represents the number of times device in inactive since last read
...
> /* Each client has this additional data */
> struct mxt_data {
> struct i2c_client *client;
> @@ -372,6 +380,9 @@ struct mxt_data {
> const char *pcfg_name;
> const char *input_name;
> struct mxt_flash *flash;
> + struct work_struct watchdog_work;
> + struct timer_list watchdog_timer;
This should be replaced with a delayed_work.
> + struct mxt_statusinfo mxt_status;
>
> /* Cached parameters from object table */
> u16 T5_address;
...
> +static void mxt_watchdog_work(struct work_struct *work)
> +{
> + struct mxt_data *data =
> + container_of(work, struct mxt_data, watchdog_work);
> + u16 info_buf;
> + int ret = 0;
> + u8 size = 2;
> + if (data->suspended || data->in_bootloader)
> + return;
> +
> + ret = __mxt_read_reg(data->client, 0, size, &info_buf);
Looks like this need to be protected with a lock to not race with the
suspending / bootloader states.
> + if (ret) {
> + data->mxt_status.error_count++;
> + data->mxt_status.dev_status = false;
> + } else {
> + data->mxt_status.dev_status = true;
> + }
> +}
...> @@ -4329,6 +4414,13 @@ static int mxt_probe(struct i2c_client
*client, const struct i2c_device_id *id)
> msleep(MXT_RESET_TIME);
> }
>
> + INIT_WORK(&data->watchdog_work, mxt_watchdog_work);
> +
> + /* setup watchdog timer */
> + timer_setup(&data->watchdog_timer, mxt_watchdog_timer, 0);
> +
> + mxt_start_wd_timer(data);
I'd expect it to be optional and opt-in by either using #ifdef
TOUCHSCREEN_ATMEL_MXT_DEBUG or having a new debugfs option to explicitly
enable the "watchdog".
next prev parent reply other threads:[~2020-03-25 19:35 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 13:32 [PATCH v9 00/55] atmel_mxt_ts misc Jiada Wang
2020-03-25 13:32 ` [PATCH v9 01/55] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-25 13:32 ` [PATCH v9 02/55] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-25 13:32 ` [PATCH v9 03/55] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-03-25 13:32 ` [PATCH v9 04/55] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-25 13:32 ` [PATCH v9 05/55] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-25 13:32 ` [PATCH v9 06/55] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-03-25 13:32 ` [PATCH v9 07/55] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 08/55] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 09/55] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-25 13:32 ` [PATCH v9 10/55] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-25 13:32 ` [PATCH v9 11/55] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-25 13:32 ` [PATCH v9 12/55] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-25 13:32 ` [PATCH v9 13/55] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-25 19:05 ` Dmitry Osipenko
2020-03-27 11:09 ` Wang, Jiada
2020-03-29 18:54 ` Dmitry Osipenko
2020-03-30 4:10 ` Wang, Jiada
2020-03-25 13:32 ` [PATCH v9 14/55] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 15/55] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-25 13:32 ` [PATCH v9 16/55] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-25 13:32 ` [PATCH v9 17/55] Input: atmel_mxt_ts: Rename mxt_fw_version_show to fw_version_show Jiada Wang
2020-03-25 13:32 ` [PATCH v9 18/55] Input: atmel_mxt_ts: Rename mxt_hw_version_show to hw_version_show Jiada Wang
2020-03-25 13:32 ` [PATCH v9 19/55] Input: atmel_mxt_ts: rename mxt_update_fw_store to update_fw_store Jiada Wang
2020-03-25 13:32 ` [PATCH v9 20/55] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 21/55] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-25 13:33 ` [PATCH v9 22/55] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-25 13:33 ` [PATCH v9 23/55] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-25 13:33 ` [PATCH v9 24/55] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 25/55] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-25 13:33 ` [PATCH v9 26/55] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-03-25 13:33 ` [PATCH v9 27/55] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-25 13:33 ` [PATCH v9 28/55] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-25 13:33 ` [PATCH v9 29/55] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-25 13:33 ` [PATCH v9 30/55] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-25 13:33 ` [PATCH v9 31/55] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-03-25 13:33 ` [PATCH v9 32/55] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-25 13:33 ` [PATCH v9 33/55] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-25 13:33 ` [PATCH v9 34/55] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-25 13:33 ` [PATCH v9 35/55] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-25 13:33 ` [PATCH v9 36/55] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-25 13:33 ` [PATCH v9 37/55] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-25 13:33 ` [PATCH v9 38/55] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-25 13:33 ` [PATCH v9 39/55] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 40/55] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-25 13:33 ` [PATCH v9 41/55] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-25 13:33 ` [PATCH v9 42/55] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-25 13:33 ` [PATCH v9 43/55] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-03-25 13:33 ` [PATCH v9 44/55] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 45/55] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 46/55] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 47/55] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 48/55] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 49/55] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-25 13:33 ` [PATCH v9 50/55] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-25 13:33 ` [PATCH v9 51/55] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-25 13:33 ` [PATCH v9 52/55] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-03-25 19:35 ` Dmitry Osipenko [this message]
2020-03-25 19:41 ` Dmitry Osipenko
2020-03-27 12:49 ` Wang, Jiada
2020-03-27 13:37 ` Dmitry Osipenko
2020-03-27 13:43 ` Dmitry Osipenko
2020-03-25 13:33 ` [PATCH v9 53/55] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-25 13:33 ` [PATCH v9 54/55] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-03-25 13:33 ` [PATCH v9 55/55] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4aeda6f1-25d8-9437-5cd0-560e43dbe081@gmail.com \
--to=digetx@gmail.com \
--cc=Andrew_Gabbasov@mentor.com \
--cc=benjamin.tissoires@redhat.com \
--cc=bsz@semihalf.com \
--cc=dmitry.torokhov@gmail.com \
--cc=erosca@de.adit-jv.com \
--cc=jiada_wang@mentor.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nick@shmanahar.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).