[PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[Filipe Laíns]

The Logitech G Powerplay has a lightspeed receiver with a static HID++
device with ID 7 attached to it to. It is used to configure the led on
the mat. For this reason I increased the max number of devices.

I also marked all lightspeed devices as HID++ compatible. As the
internal powerplay device does not have REPORT_TYPE_KEYBOARD or
REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible in
logi_hidpp_dev_conn_notif_equad.

Signed-off-by: Filipe Laíns <lains@archlinux.org>
---
 drivers/hid/hid-logitech-dj.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index bb50d6e7745b..732380b55b15 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -16,11 +16,11 @@
 #include <asm/unaligned.h>
 #include "hid-ids.h"
 
-#define DJ_MAX_PAIRED_DEVICES			6
+#define DJ_MAX_PAIRED_DEVICES			7
 #define DJ_MAX_NUMBER_NOTIFS			8
 #define DJ_RECEIVER_INDEX			0
 #define DJ_DEVICE_INDEX_MIN			1
-#define DJ_DEVICE_INDEX_MAX			6
+#define DJ_DEVICE_INDEX_MAX			7
 
 #define DJREPORT_SHORT_LENGTH			15
 #define DJREPORT_LONG_LENGTH			32
@@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
 	case 0x0c:
 		device_type = "eQUAD Lightspeed 1";
 		logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
-		workitem.reports_supported |= STD_KEYBOARD;
+		workitem.reports_supported |= STD_KEYBOARD | HIDPP;
 		break;
 	case 0x0d:
 		device_type = "eQUAD Lightspeed 1_1";
@@ -1850,6 +1850,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
 	 .driver_data = recvr_type_gaming_hidpp},
+	{ /* Logitech powerplay mat/receiver (0xc539) */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		0xc53a),
+	 .driver_data = recvr_type_gaming_hidpp},
 	{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
 	 .driver_data = recvr_type_27mhz},
-- 
2.24.1

Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[Filipe Laíns]

[-- Attachment #1: Type: text/plain, Size: 2409 bytes --]

On Sun, 2020-01-12 at 20:50 +0000, Filipe Laíns wrote:
> The Logitech G Powerplay has a lightspeed receiver with a static
> HID++
> device with ID 7 attached to it to. It is used to configure the led
> on
> the mat. For this reason I increased the max number of devices.
> 
> I also marked all lightspeed devices as HID++ compatible. As the
> internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible in
  ^^^^^^^^^^^^^^^^^^^^
   REPORT_TYPE_MOUSE

Err, should I send another patch?

> logi_hidpp_dev_conn_notif_equad.
> 
> Signed-off-by: Filipe Laíns <lains@archlinux.org>
> ---
>  drivers/hid/hid-logitech-dj.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-
> logitech-dj.c
> index bb50d6e7745b..732380b55b15 100644
> --- a/drivers/hid/hid-logitech-dj.c
> +++ b/drivers/hid/hid-logitech-dj.c
> @@ -16,11 +16,11 @@
>  #include <asm/unaligned.h>
>  #include "hid-ids.h"
>  
> -#define DJ_MAX_PAIRED_DEVICES			6
> +#define DJ_MAX_PAIRED_DEVICES			7
>  #define DJ_MAX_NUMBER_NOTIFS			8
>  #define DJ_RECEIVER_INDEX			0
>  #define DJ_DEVICE_INDEX_MIN			1
> -#define DJ_DEVICE_INDEX_MAX			6
> +#define DJ_DEVICE_INDEX_MAX			7
>  
>  #define DJREPORT_SHORT_LENGTH			15
>  #define DJREPORT_LONG_LENGTH			32
> @@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct
> hid_device *hdev,
>  	case 0x0c:
>  		device_type = "eQUAD Lightspeed 1";
>  		logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report,
> &workitem);
> -		workitem.reports_supported |= STD_KEYBOARD;
> +		workitem.reports_supported |= STD_KEYBOARD | HIDPP;
>  		break;
>  	case 0x0d:
>  		device_type = "eQUAD Lightspeed 1_1";
> @@ -1850,6 +1850,10 @@ static const struct hid_device_id
> logi_dj_receivers[] = {
>  	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
>  		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
>  	 .driver_data = recvr_type_gaming_hidpp},
> +	{ /* Logitech powerplay mat/receiver (0xc539) */
> +	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> +		0xc53a),
> +	 .driver_data = recvr_type_gaming_hidpp},
>  	{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
>  	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_MX3000_RECEIVER),
>  	 .driver_data = recvr_type_27mhz},

-- 
Filipe Laíns

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[Benjamin Tissoires]

Hi Filipe,

On Mon, Jan 13, 2020 at 6:54 AM Filipe Laíns <lains@archlinux.org> wrote:
>
> On Sun, 2020-01-12 at 20:50 +0000, Filipe Laíns wrote:
> > The Logitech G Powerplay has a lightspeed receiver with a static
> > HID++
> > device with ID 7 attached to it to. It is used to configure the led
> > on
> > the mat. For this reason I increased the max number of devices.
> >
> > I also marked all lightspeed devices as HID++ compatible. As the
> > internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> > REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible in
>   ^^^^^^^^^^^^^^^^^^^^
>    REPORT_TYPE_MOUSE
>
> Err, should I send another patch?

Yes please.

There are a few reasons for that:
- it takes more time to actually edit your commit message when
applying it, and this way I am actually testing your commit, not the
edited one
- it also means I have to remember that I need to fix up the commit
message (while if you send an updated version, you ensure that I will
not forget about it)
- it's a one patch series, so we can just have a look at the v2 (it
would have been a 20 patch series, things would have been different
because sending a v2 for one typo means you are sending 20 emails in
other maintainers mailbox)
- it's more efficient (you don't lose one hour waiting for me to
answer) to just send the v2 and a message telling us to discard the v1
:)

Cheers,
Benjamin
-

>
> > logi_hidpp_dev_conn_notif_equad.
> >
> > Signed-off-by: Filipe Laíns <lains@archlinux.org>
> > ---
> >  drivers/hid/hid-logitech-dj.c | 10 +++++++---
> >  1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-
> > logitech-dj.c
> > index bb50d6e7745b..732380b55b15 100644
> > --- a/drivers/hid/hid-logitech-dj.c
> > +++ b/drivers/hid/hid-logitech-dj.c
> > @@ -16,11 +16,11 @@
> >  #include <asm/unaligned.h>
> >  #include "hid-ids.h"
> >
> > -#define DJ_MAX_PAIRED_DEVICES                        6
> > +#define DJ_MAX_PAIRED_DEVICES                        7
> >  #define DJ_MAX_NUMBER_NOTIFS                 8
> >  #define DJ_RECEIVER_INDEX                    0
> >  #define DJ_DEVICE_INDEX_MIN                  1
> > -#define DJ_DEVICE_INDEX_MAX                  6
> > +#define DJ_DEVICE_INDEX_MAX                  7
> >
> >  #define DJREPORT_SHORT_LENGTH                        15
> >  #define DJREPORT_LONG_LENGTH                 32
> > @@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct
> > hid_device *hdev,
> >       case 0x0c:
> >               device_type = "eQUAD Lightspeed 1";
> >               logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report,
> > &workitem);
> > -             workitem.reports_supported |= STD_KEYBOARD;
> > +             workitem.reports_supported |= STD_KEYBOARD | HIDPP;
> >               break;
> >       case 0x0d:
> >               device_type = "eQUAD Lightspeed 1_1";
> > @@ -1850,6 +1850,10 @@ static const struct hid_device_id
> > logi_dj_receivers[] = {
> >         HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> >               USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
> >        .driver_data = recvr_type_gaming_hidpp},
> > +     { /* Logitech powerplay mat/receiver (0xc539) */
> > +       HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > +             0xc53a),
> > +      .driver_data = recvr_type_gaming_hidpp},
> >       { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> >         HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > USB_DEVICE_ID_MX3000_RECEIVER),
> >        .driver_data = recvr_type_27mhz},
>
> --
> Filipe Laíns

Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[Filipe Laíns]

[-- Attachment #1: Type: text/plain, Size: 614 bytes --]

On Sun, 2020-01-12 at 20:50 +0000, Filipe Laíns wrote:
> I also marked all lightspeed devices as HID++ compatible. As the
> internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible in
> logi_hidpp_dev_conn_notif_equad.

Actually I had another look at the code and I don't understand why we
are manually setting |= HIDPP in
logi_hidpp_dev_conn_notif_equad/logi_hidpp_dev_conn_notif_27mhz. We
should set it in logi_dj_hidpp_event as it is triggered by receiving a
HID++ packet.

What do you think Benjamin?

--
Filipe Laíns

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[Benjamin Tissoires]

On Tue, Jan 14, 2020 at 1:31 AM Filipe Laíns <lains@archlinux.org> wrote:
>
> On Sun, 2020-01-12 at 20:50 +0000, Filipe Laíns wrote:
> > I also marked all lightspeed devices as HID++ compatible. As the
> > internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> > REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible in
> > logi_hidpp_dev_conn_notif_equad.
>
> Actually I had another look at the code and I don't understand why we
> are manually setting |= HIDPP in
> logi_hidpp_dev_conn_notif_equad/logi_hidpp_dev_conn_notif_27mhz. We
> should set it in logi_dj_hidpp_event as it is triggered by receiving a
> HID++ packet.

long story short: nope :)

The whole purpose of setting the workitem->reports_supported is to be
able to create the matching report descriptor in the new virtual
device. So having this set in a callback will add an operation for
nothing every time we get an event, and will also not ensure a proper
separation of concerns.

Cheers,
Benjamin

>
> What do you think Benjamin?
>
> --
> Filipe Laíns

Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[Filipe Laíns]

[-- Attachment #1: Type: text/plain, Size: 1533 bytes --]

On Tue, 2020-01-14 at 20:48 +1000, Benjamin Tissoires wrote:
> On Tue, Jan 14, 2020 at 1:31 AM Filipe Laíns <lains@archlinux.org>
> wrote:
> > On Sun, 2020-01-12 at 20:50 +0000, Filipe Laíns wrote:
> > > I also marked all lightspeed devices as HID++ compatible. As the
> > > internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> > > REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible
> > > in
> > > logi_hidpp_dev_conn_notif_equad.
> > 
> > Actually I had another look at the code and I don't understand why
> > we
> > are manually setting |= HIDPP in
> > logi_hidpp_dev_conn_notif_equad/logi_hidpp_dev_conn_notif_27mhz. We
> > should set it in logi_dj_hidpp_event as it is triggered by
> > receiving a
> > HID++ packet.
> 
> long story short: nope :)
> 
> The whole purpose of setting the workitem->reports_supported is to be
> able to create the matching report descriptor in the new virtual
> device. So having this set in a callback will add an operation for
> nothing every time we get an event, and will also not ensure a proper
> separation of concerns.
> 
> Cheers,
> Benjamin
> 
> > What do you think Benjamin?
> > 
> > --
> > Filipe Laíns

Okay, then is maybe better if I add HIDPP to reports_supported based on
the device ID (7). This is the only product to my knowledge that
exports a device with ID 7. It's a better solution than setting HIDPP
on all lightspeed devices.

I will send a new patch if you agree with this approach.

-- 
Filipe Laíns

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH] HID: logitech-hidpp: add support for the Powerplay mat/receiver

[Benjamin Tissoires]

On Tue, Jan 14, 2020 at 10:55 AM Filipe Laíns <lains@archlinux.org> wrote:
>
> On Tue, 2020-01-14 at 20:48 +1000, Benjamin Tissoires wrote:
> > On Tue, Jan 14, 2020 at 1:31 AM Filipe Laíns <lains@archlinux.org>
> > wrote:
> > > On Sun, 2020-01-12 at 20:50 +0000, Filipe Laíns wrote:
> > > > I also marked all lightspeed devices as HID++ compatible. As the
> > > > internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> > > > REPORT_TYPE_KEYBOARD it was not being marked as HID++ compatible
> > > > in
> > > > logi_hidpp_dev_conn_notif_equad.
> > >
> > > Actually I had another look at the code and I don't understand why
> > > we
> > > are manually setting |= HIDPP in
> > > logi_hidpp_dev_conn_notif_equad/logi_hidpp_dev_conn_notif_27mhz. We
> > > should set it in logi_dj_hidpp_event as it is triggered by
> > > receiving a
> > > HID++ packet.
> >
> > long story short: nope :)
> >
> > The whole purpose of setting the workitem->reports_supported is to be
> > able to create the matching report descriptor in the new virtual
> > device. So having this set in a callback will add an operation for
> > nothing every time we get an event, and will also not ensure a proper
> > separation of concerns.
> >
> > Cheers,
> > Benjamin
> >
> > > What do you think Benjamin?
> > >
> > > --
> > > Filipe Laíns
>
> Okay, then is maybe better if I add HIDPP to reports_supported based on
> the device ID (7). This is the only product to my knowledge that
> exports a device with ID 7. It's a better solution than setting HIDPP
> on all lightspeed devices.

Yep, looks better.

>
> I will send a new patch if you agree with this approach.

thanks.

Cheers,
Benjamin

>
> --
> Filipe Laíns