linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alistair Francis <alistair23@gmail.com>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: Alistair Francis <alistair@alistair23.me>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	linux-input@vger.kernel.org, dl-linux-imx <linux-imx@nxp.com>,
	Sascha Hauer <kernel@pengutronix.de>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 6/6] arch/arm: reMarkable2: Enable wacom_i2c
Date: Sat, 23 Jan 2021 00:04:12 -0800	[thread overview]
Message-ID: <CAKmqyKPey8xSfWPuiwR__h-tQBBZ+WjtbC1aO8umSzpBWC=xkw@mail.gmail.com> (raw)
In-Reply-To: <20210122153231.qqiuwltvzzg52phg@pengutronix.de>

On Fri, Jan 22, 2021 at 7:32 AM Marco Felsch <m.felsch@pengutronix.de> wrote:
>
> Hi,
>
> thanks for the patch.
>
> On 21-01-20 22:56, Alistair Francis wrote:
> > Enable the wacom_i2c touchscreen for the reMarkable2.
> >
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > ---
> >  arch/arm/boot/dts/imx7d-remarkable2.dts | 41 +++++++++++++++++++++++++
> >  arch/arm/configs/imx_v6_v7_defconfig    |  1 +
>
> Those two changes should be splitted and the dts patch should be named:
> "ARM: dts: imx7d: remarkable2: add wacom digitizer device".
>
> >  2 files changed, 42 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > index fba55a0e028a..8052d884a5e5 100644
> > --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > @@ -150,6 +150,30 @@ &dma_apbh {
> >       status = "disabled";
> >  };
> >
> > +&i2c1 {
> > +     clock-frequency = <400000>;
> > +     pinctrl-names = "default", "sleep";
> > +     pinctrl-0 = <&pinctrl_i2c1>;
> > +     pinctrl-1 = <&pinctrl_i2c1>;
>
> No need to specify the sleep state if both are using the same pinctrl
> config.
>
> > +     status = "okay";
> > +
> > +     digitizer: wacom-i2c@9 {
>
> this should be:
>         wacom_digitizer: digitizer@9 {
>
> > +             pinctrl-names = "default", "sleep";
> > +             pinctrl-0 = <&pinctrl_wacom>;
> > +             pinctrl-1 = <&pinctrl_wacom>;
>
> Same here, sleep and default refer to the same state.
>
> > +             compatible = "wacom,wacom-i2c";
> > +             reg = <0x09>;
>
> compatible and reg are always the first to properties.
>
> > +             interrupt-parent = <&gpio1>;
> > +             interrupts = <1 2>;
>
> Please use defines.

I have addressed all your comments.

>
> > +             flip-tilt-x;
> > +             flip-tilt-y;
> > +             flip-pos-x;
> > +             flip-pos-y;
> > +             flip-distance;
> > +             vdd-supply = <&reg_digitizer>;
>
> Where is this regulator added?

It's already in the DT, it will be added with the initial commit
(which is currently on the list).

Alistair

>
> > +     };
> > +};
> > +
> >  &sdma {
> >       status = "okay";
> >  };
> > @@ -221,6 +245,16 @@ &wdog1 {
> >  };
> >
> >  &iomuxc_lpsr {
> > +     pinctrl_wacom: wacomgrp {
> > +             fsl,pins = <
> > +                     /*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0   0x00000074 /* WACOM RESET */
> > +                     MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1     0x00000034 /* WACOM INT */
> > +                     MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4     0x00000074 /* PDCTB */
> > +                     /*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5   0x00000014 /* FWE */
> > +                     /*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6   0x00000014 /* WACOM PWR ENABLE */
> > +             >;
> > +     };
>
> Pls, sort this alphabetical.
>
> > +
> >       pinctrl_digitizer_reg: digitizerreggrp {
> >               fsl,pins = <
> >                       /* DIGITIZER_PWR_EN */
> > @@ -236,6 +270,13 @@ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16        0x59
> >               >;
> >       };
> >
> > +     pinctrl_i2c1: i2c1grp {
> > +             fsl,pins = <
> > +                     MX7D_PAD_I2C1_SDA__I2C1_SDA             0x4000007f
> > +                     MX7D_PAD_I2C1_SCL__I2C1_SCL             0x4000007f
> > +             >;
> > +     };
> > +
> >       pinctrl_uart1: uart1grp {
> >               fsl,pins = <
> >                       MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX    0x79
> > diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
> > index fa9229616106..2fc8dc6a8b0a 100644
> > --- a/arch/arm/configs/imx_v6_v7_defconfig
> > +++ b/arch/arm/configs/imx_v6_v7_defconfig
> > @@ -167,6 +167,7 @@ CONFIG_TOUCHSCREEN_DA9052=y
> >  CONFIG_TOUCHSCREEN_EGALAX=y
> >  CONFIG_TOUCHSCREEN_GOODIX=y
> >  CONFIG_TOUCHSCREEN_ILI210X=y
> > +CONFIG_TOUCHSCREEN_WACOM_I2C=y
> >  CONFIG_TOUCHSCREEN_MAX11801=y
> >  CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
> >  CONFIG_TOUCHSCREEN_EDT_FT5X06=y
> > --
> > 2.29.2
> >
> >
> >
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  reply	other threads:[~2021-01-23  8:06 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-21  6:56 [PATCH v2 0/6] Add Wacom I2C support to rM2 Alistair Francis
2021-01-21  6:56 ` [PATCH v2 1/6] devicetree/bindings: Initial commit of wacom,wacom-i2c Alistair Francis
2021-01-22 15:49   ` [PATCH v2 1/6] devicetree/bindings: Initial commit of wacom, wacom-i2c Marco Felsch
2021-01-21  6:56 ` [PATCH v2 2/6] input/touchscreen: Add device tree support to wacom_i2c Alistair Francis
2021-01-22 15:57   ` Marco Felsch
2021-01-21  6:56 ` [PATCH v2 3/6] touchscreen/wacom_i2c: Add support for distance and tilt x/y Alistair Francis
2021-01-22 16:00   ` Marco Felsch
2021-01-21  6:56 ` [PATCH v2 4/6] touchscreen/wacom_i2c: Clean up the query device fields Alistair Francis
2021-01-21  6:56 ` [PATCH v2 5/6] touchscreen/wacom_i2c: Add support for vdd regulator Alistair Francis
2021-01-21  6:56 ` [PATCH v2 6/6] arch/arm: reMarkable2: Enable wacom_i2c Alistair Francis
2021-01-22 15:32   ` Marco Felsch
2021-01-23  8:04     ` Alistair Francis [this message]
2021-01-22 16:14 ` [PATCH v2 0/6] Add Wacom I2C support to rM2 Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAKmqyKPey8xSfWPuiwR__h-tQBBZ+WjtbC1aO8umSzpBWC=xkw@mail.gmail.com' \
    --to=alistair23@gmail.com \
    --cc=alistair@alistair23.me \
    --cc=dmitry.torokhov@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).