Re: [PATCH v3 3/3] dt-bindings: touchscreen: Add binding for Novatek NT36xxx series driver

[Rob Herring <robh+dt@kernel.org>]

On Wed, Oct 7, 2020 at 1:05 PM <kholk11@gmail.com> wrote:
>
> From: AngeloGioacchino Del Regno <kholk11@gmail.com>

Please send to DT list so checks run and it's in my review queue.

>
> Add binding for the Novatek NT36xxx series touchscreen driver.
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
> ---
>  .../input/touchscreen/novatek,nt36xxx.yaml    | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/novatek,nt36xxx.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/novatek,nt36xxx.yaml b/Documentation/devicetree/bindings/input/touchscreen/novatek,nt36xxx.yaml
> new file mode 100644
> index 000000000000..9f350f4e6d6a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/novatek,nt36xxx.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/novatek,nt36xxx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Novatek NT36xxx series touchscreen controller Bindings
> +
> +maintainers:
> +  - TBD
> +
> +allOf:
> +  - $ref: touchscreen.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - novatek,nt36xxx
> +
> +  reg:
> +    enum: [ 0x62 ]
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reset-gpio:
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: Power supply regulator for VDD pin
> +
> +  vio-reg-name:
> +    description: Power supply regulator on VDD-IO pin
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      nt36xxx@62 {
> +        compatible = "novatek,nt36xxx";
> +        reg = <0x62>;
> +        interrupt-parent = <&tlmm>;
> +        interrupts = <45 IRQ_TYPE_EDGE_RISING>;
> +        reset-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> +      };
> +    };
> +
> +...
> --
> 2.28.0
>