Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
To: "Clément VUCHENER" <clement.vuchener@gmail.com>
Cc: Harry Cutts <hcutts@chromium.org>,
	Peter Hutterer <peter.hutterer@who-t.net>,
	"open list:HID CORE LAYER" <linux-input@vger.kernel.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Jiri Kosina <jikos@kernel.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Nestor Lopez Casado <nlopezcasad@logitech.com>,
	lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 7/8] HID: logitech: Enable high-resolution scrolling on Logitech mice
Date: Thu, 25 Apr 2019 10:45:16 +0200
Message-ID: <CAO-hwJ+r1TUQLZqdpNFD4AWC3URro3=Tc56gjV52i=aWrCbL8A@mail.gmail.com> (raw)
In-Reply-To: <CAM4jgCrLRxOx-qtq8Wfbc1xmYkNHG9vsRSk_BBK5OPgkLyVYnQ@mail.gmail.com>

On Thu, Apr 25, 2019 at 10:25 AM Clément VUCHENER
<clement.vuchener@gmail.com> wrote:
>
> Le jeu. 25 avr. 2019 à 09:40, Benjamin Tissoires
> <benjamin.tissoires@redhat.com> a écrit :
> >
> > Hi Clément,
> >
> > On Wed, Apr 24, 2019 at 5:34 PM Clément VUCHENER
> > <clement.vuchener@gmail.com> wrote:
> > >
> > > Hi Benjamin,
> > >
> > > I tried again to add hi-res wheel support for the G500 with Hans de
> > > Goede's latest patch series you've just merged in for-5.2/logitech, it
> > > is much better but there is still some issues.
> > >
> > > The first one is the device index, I need to use device index 0
> > > instead 0xff. I added a quick and dirty quirk (stealing in the
> > > QUIRK_CLASS range since the normal quirk range looks full) to change
> > > the device index assigned in __hidpp_send_report. After that the
> > > device is correctly initialized and the wheel multiplier is set.
> >
> > Hmm, maybe we should restrain a little bit the reserved quirks...
> > But actually, .driver_data and .quirks are both unsigned long, so you
> > should be able to use the 64 bits.
>
> Only on 64 bits architectures, or is the kernel forcing long integers
> to be 64 bits everywhere?

Damnit, you are correct, there is no such enforcement :/

>
> >
> > >
> > > The second issue is that wheel values are not actually scaled
> > > according to the multiplier. I get 7/8 full scroll event for each
> > > wheel step. I think it happens because the mouse is split in two
> > > devices. The first device has the wheel events, and the second device
> > > has the HID++ reports. The wheel multiplier is only set on the second
> > > device (where the hi-res mode is enabled) and does not affect the
> > > wheel events from the first one.
> >
> > I would think this have to do with the device not accepting the
> > command instead. Can you share some raw logs of the events (ideally
> > with hid-recorder from
> > https://gitlab.freedesktop.org/libevdev/hid-tools)?
>
> I already checked with usbmon and double-checked by querying the
> register. The flag is set and accepted by the device and it behaves
> accordingly: it sends about 8 wheel events per step.

OK, that's what I wanted to see.

>
> hid-recorder takes hidraw nodes as parameters, how do I use it to
> record the initialization by the driver?

You can't. But it doesn't really matter here because I wanted to check
what your mouse is actually sending after the initialization.

So if I read correctly: the mouse is sending high res data but
evemu-recorder shows one REL_WHEEL event every 7/8 clicks?

Cheers,
Benjamin

> > > Le mer. 19 déc. 2018 à 21:35, Benjamin Tissoires
> > > <benjamin.tissoires@redhat.com> a écrit :
> > > >
> > > > On Wed, Dec 19, 2018 at 11:57 AM Clément VUCHENER
> > > > <clement.vuchener@gmail.com> wrote:
> > > > >
> > > > > Le sam. 15 déc. 2018 à 15:45, Clément VUCHENER
> > > > > <clement.vuchener@gmail.com> a écrit :
> > > > > >
> > > > > > Le ven. 14 déc. 2018 à 19:37, Harry Cutts <hcutts@chromium.org> a écrit :
> > > > > > >
> > > > > > > Hi Clement,
> > > > > > >
> > > > > > > On Fri, 14 Dec 2018 at 05:47, Clément VUCHENER
> > > > > > > <clement.vuchener@gmail.com> wrote:
> > > > > > > > Hi, The G500s (and the G500 too, I think) does support the "scrolling
> > > > > > > > acceleration" bit. If I set it, I get around 8 events for each wheel
> > > > > > > > "click", this is what this driver expects, right? If I understood
> > > > > > > > correctly, I should try this patch with the
> > > > > > > > HIDPP_QUIRK_HI_RES_SCROLL_1P0 quirk set for my mouse.
> > > > > > >
> > > > > > > Thanks for the info! Yes, that should work.
> > > > > >
> > > > > > Well, it is not that simple. I get "Device not connected" errors for
> > > > > > both interfaces of the mouse.
> > > > >
> > > > > I suspect the device is not responding because the hid device is not
> > > > > started. When is hid_hw_start supposed to be called? It is called
> > > > > early for HID_QUIRK_CLASS_G920 but later for other device. So the
> > > > > device is not started when hidpp_is_connected is called. Is this
> > > > > because most of the device in this driver are not real HID devices but
> > > > > DJ devices? How should non-DJ devices be treated?
> > > >
> > > > Hi Clement,
> > > >
> > > > I have a series I sent last September that allows to support non DJ
> > > > devices on logitech-hidpp
> > > > (https://patchwork.kernel.org/project/linux-input/list/?series=16359).
> > > >
> > > > In its current form, with the latest upstream kernel, the series will
> > > > oops during the .event() callback, which is easy enough to fix.
> > > > However, I am currently trying to make it better as a second or third
> > > > reading made me realized that there was a bunch of non-sense in it and
> > > > a proper support would require slightly more work for the non unifying
> > > > receiver case.
> > > >
> > > > I hope I'll be able to send out something by the end of the week.
> > > >
> > > > Cheers,
> > > > Benjamin

  reply index

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-05  0:42 [PATCH v3 0/8] HID: MS and Logitech high-resolution scroll wheel support Peter Hutterer
2018-12-05  0:42 ` [PATCH v3 1/8] Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES` Peter Hutterer
2018-12-06 22:56   ` Dmitry Torokhov
2018-12-05  0:42 ` [PATCH v3 2/8] HID: core: store the collections as a basic tree Peter Hutterer
2018-12-05  0:42 ` [PATCH v3 3/8] HID: core: process the Resolution Multiplier Peter Hutterer
2018-12-05  0:42 ` [PATCH v3 4/8] HID: input: use the Resolution Multiplier for high-resolution scrolling Peter Hutterer
2018-12-05  0:42 ` [PATCH v3 5/8] HID: logitech-hidpp: fix typo, hiddpp to hidpp Peter Hutterer
2018-12-05  0:42 ` [PATCH v3 6/8] HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration" Peter Hutterer
2018-12-05  0:42 ` [PATCH v3 7/8] HID: logitech: Enable high-resolution scrolling on Logitech mice Peter Hutterer
2018-12-05 21:52   ` Harry Cutts
2018-12-14 13:46   ` Clément VUCHENER
2018-12-14 18:37     ` Harry Cutts
2018-12-15 14:45       ` Clément VUCHENER
2018-12-19 10:57         ` Clément VUCHENER
2018-12-19 20:34           ` Benjamin Tissoires
2019-04-24 15:34             ` Clément VUCHENER
2019-04-25  7:40               ` Benjamin Tissoires
2019-04-25  8:24                 ` Clément VUCHENER
2019-04-25  8:45                   ` Benjamin Tissoires [this message]
2019-04-25  9:28                     ` Clément VUCHENER
2019-04-25  9:35                       ` Benjamin Tissoires
2019-04-25 12:35                         ` Clément VUCHENER
2018-12-05  0:42 ` [PATCH v3 8/8] HID: logitech: Use LDJ_DEVICE macro for existing " Peter Hutterer
2018-12-05 21:56 ` [PATCH v3 0/8] HID: MS and Logitech high-resolution scroll wheel support Harry Cutts
2018-12-07 16:18   ` Benjamin Tissoires

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAO-hwJ+r1TUQLZqdpNFD4AWC3URro3=Tc56gjV52i=aWrCbL8A@mail.gmail.com' \
    --to=benjamin.tissoires@redhat.com \
    --cc=clement.vuchener@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=hcutts@chromium.org \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nlopezcasad@logitech.com \
    --cc=peter.hutterer@who-t.net \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git