Linux Input Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH][RESEND] Input: hyperv-keyboard: Add the support of hibernation
@ 2020-01-06 22:40 Dexuan Cui
  2020-01-11 16:26 ` Sasha Levin
  0 siblings, 1 reply; 5+ messages in thread
From: Dexuan Cui @ 2020-01-06 22:40 UTC (permalink / raw)
  To: kys, haiyangz, sthemmin, sashal, dmitry.torokhov, linux-hyperv,
	linux-input, linux-kernel, mikelley, Alexander.Levin
  Cc: Dexuan Cui

Add suspend() and resume() functions so the Hyper-V virtual keyboard
can participate in VM hibernation.

Note that the keyboard is a "wakeup" device that could abort an in-progress
hibernation if there is keyboard event.  No attempt is made to suppress this
behavior.  If desired, a sysadmin can disable the keyboard as a wakeup device
using standard mechanisms such as:

echo disabled > /sys/bus/vmbus/drivers/hyperv_keyboard/XXX/power/wakeup
(where XXX is the device's GUID)

Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
---

This is a RESEND of https://lkml.org/lkml/2019/11/24/115 .

Please review.

If it looks good, Sasha Levin, can you please pick it up via the
hyperv/linux.git tree, as you did last time for this driver?


 drivers/input/serio/hyperv-keyboard.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
index e486a8a74c40..df4e9f6f4529 100644
--- a/drivers/input/serio/hyperv-keyboard.c
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -259,6 +259,8 @@ static int hv_kbd_connect_to_vsp(struct hv_device *hv_dev)
 	u32 proto_status;
 	int error;
 
+	reinit_completion(&kbd_dev->wait_event);
+
 	request = &kbd_dev->protocol_req;
 	memset(request, 0, sizeof(struct synth_kbd_protocol_request));
 	request->header.type = __cpu_to_le32(SYNTH_KBD_PROTOCOL_REQUEST);
@@ -380,6 +382,29 @@ static int hv_kbd_remove(struct hv_device *hv_dev)
 	return 0;
 }
 
+static int hv_kbd_suspend(struct hv_device *hv_dev)
+{
+	vmbus_close(hv_dev->channel);
+
+	return 0;
+}
+
+static int hv_kbd_resume(struct hv_device *hv_dev)
+{
+	int ret;
+
+	ret = vmbus_open(hv_dev->channel,
+			 KBD_VSC_SEND_RING_BUFFER_SIZE,
+			 KBD_VSC_RECV_RING_BUFFER_SIZE,
+			 NULL, 0,
+			 hv_kbd_on_channel_callback,
+			 hv_dev);
+	if (ret == 0)
+		ret = hv_kbd_connect_to_vsp(hv_dev);
+
+	return ret;
+}
+
 static const struct hv_vmbus_device_id id_table[] = {
 	/* Keyboard guid */
 	{ HV_KBD_GUID, },
@@ -393,6 +418,8 @@ static struct  hv_driver hv_kbd_drv = {
 	.id_table = id_table,
 	.probe = hv_kbd_probe,
 	.remove = hv_kbd_remove,
+	.suspend = hv_kbd_suspend,
+	.resume = hv_kbd_resume,
 	.driver = {
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
-- 
2.19.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-06 22:40 [PATCH][RESEND] Input: hyperv-keyboard: Add the support of hibernation Dexuan Cui
2020-01-11 16:26 ` Sasha Levin
2020-01-15 19:53   ` Dexuan Cui
2020-01-25  1:59     ` Dexuan Cui
2020-01-25 21:45       ` Sasha Levin

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git