linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCHv2 0/5] EXC3000 Updates
@ 2020-05-19 18:24 Sebastian Reichel
  2020-05-19 18:24 ` [PATCHv2 1/5] dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Sebastian Reichel
                   ` (4 more replies)
  0 siblings, 5 replies; 12+ messages in thread
From: Sebastian Reichel @ 2020-05-19 18:24 UTC (permalink / raw)
  To: Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel, Sebastian Reichel

Hi,

This is (a much delayed, sorry!) PATCHv2 of the EXC80Hxx support
patchset. Here is the changelog since [PATCHv1]:

 - prepend new patch converting binding document to YAML
 - prepend new patch switching to I2C probe_new
 - append new patch adding reset-gpio support
 - use explicit compatible values for the touchscreen chips instead of
   a wildcast. Since the documentation, that I have is very vague let's
   use different values for exc80h60 and exc80h84. This avoids wildcard
   DT entries and means we are prepared when noticing differences
   between the chips.
 - add accidently removed terminator entry in exc3000_id
 - use device structure with max_xy and name (suggested by Martin)
 - use SZ_4K, SZ_16K defines (suggested by Dmitry)
 - harden event check, so that MT1 and MT2 based chips only allow
   their own event type.
 - write more detailed commit description in the fw_version/model
   sysfs patch to explain why the values are not cached and why
   the simpler read(); sleep(); write() approach has not been used
 - use DEVICE_ATTR_RO() in fw_version/model patch to improve readability
 - fw_version/model: replace memcpy + null termination with strlcpy
 - fw_version/model: increase buffer size for weird firmware versions
 - fw_version/model: use sizeof() instead of hardcoded buffer sizes
 - simplify exc3000_query_interrupt() by moving the complete() call to
   the exc3000_interrupt().

I think I only ignored one review feedback, that the fw_version and
model sysfs nodes are attached to the input device instead of the
i2c device. This was done to avoid being racy:

http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/

Properties look like this after applying the patchset:

$ cat /sys/class/input/input1/{name,fw_version,model}
EETI EXC80H60 Touch Screen
00_T6
Orion_1320

Thanks in advance for looking at the patches,

-- Sebastian

[PATCHv1] https://lore.kernel.org/linux-input/20191107181010.17211-1-sebastian.reichel@collabora.com/

Sebastian Reichel (5):
  dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to
    json-schema
  Input: EXC3000: switch to i2c's probe_new API
  Input: EXC3000: add EXC80H60 and EXC80H84 support
  Input: EXC3000: Add support to query model and fw_version
  Input: EXC3000: Add reset gpio support

 .../bindings/input/touchscreen/exc3000.txt    |  26 --
 .../bindings/input/touchscreen/exc3000.yaml   |  58 +++++
 drivers/input/touchscreen/exc3000.c           | 243 ++++++++++++++++--
 3 files changed, 281 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml

-- 
2.26.2


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCHv2 1/5] dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
  2020-05-19 18:24 [PATCHv2 0/5] EXC3000 Updates Sebastian Reichel
@ 2020-05-19 18:24 ` Sebastian Reichel
  2020-05-19 20:38   ` Enric Balletbo i Serra
  2020-05-19 18:24 ` [PATCHv2 2/5] Input: EXC3000: switch to i2c's probe_new API Sebastian Reichel
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 12+ messages in thread
From: Sebastian Reichel @ 2020-05-19 18:24 UTC (permalink / raw)
  To: Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel, Sebastian Reichel

Convert the EETI EXC3000 binding to DT schema format using json-schema

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../bindings/input/touchscreen/exc3000.txt    | 26 ---------
 .../bindings/input/touchscreen/exc3000.yaml   | 53 +++++++++++++++++++
 2 files changed, 53 insertions(+), 26 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
deleted file mode 100644
index 68291b94fec2..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* EETI EXC3000 Multiple Touch Controller
-
-Required properties:
-- compatible: must be "eeti,exc3000"
-- reg: i2c slave address
-- interrupts: touch controller interrupt
-- touchscreen-size-x: See touchscreen.txt
-- touchscreen-size-y: See touchscreen.txt
-
-Optional properties:
-- touchscreen-inverted-x: See touchscreen.txt
-- touchscreen-inverted-y: See touchscreen.txt
-- touchscreen-swapped-x-y: See touchscreen.txt
-
-Example:
-
-	touchscreen@2a {
-		compatible = "eeti,exc3000";
-		reg = <0x2a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
new file mode 100644
index 000000000000..5d2e7496d6dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/exc3000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EETI EXC3000 series touchscreen controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: eeti,exc3000
+  reg:
+    const: 0x2a
+  interrupts:
+    maxItems: 1
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/interrupt-controller/irq.h"
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@2a {
+                compatible = "eeti,exc3000";
+                reg = <0x2a>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+                touchscreen-size-x = <4096>;
+                touchscreen-size-y = <4096>;
+                touchscreen-inverted-x;
+                touchscreen-swapped-x-y;
+        };
+    };
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCHv2 2/5] Input: EXC3000: switch to i2c's probe_new API
  2020-05-19 18:24 [PATCHv2 0/5] EXC3000 Updates Sebastian Reichel
  2020-05-19 18:24 ` [PATCHv2 1/5] dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Sebastian Reichel
@ 2020-05-19 18:24 ` Sebastian Reichel
  2020-05-19 18:24 ` [PATCHv2 3/5] Input: EXC3000: add EXC80H60 and EXC80H84 support Sebastian Reichel
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2020-05-19 18:24 UTC (permalink / raw)
  To: Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel, Sebastian Reichel

Switch to the "new" I2C probe API.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/input/touchscreen/exc3000.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
index e007e2e8f626..555a14305cd4 100644
--- a/drivers/input/touchscreen/exc3000.c
+++ b/drivers/input/touchscreen/exc3000.c
@@ -145,8 +145,7 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int exc3000_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int exc3000_probe(struct i2c_client *client)
 {
 	struct exc3000_data *data;
 	struct input_dev *input;
@@ -210,7 +209,7 @@ static struct i2c_driver exc3000_driver = {
 		.of_match_table = of_match_ptr(exc3000_of_match),
 	},
 	.id_table	= exc3000_id,
-	.probe		= exc3000_probe,
+	.probe_new	= exc3000_probe,
 };
 
 module_i2c_driver(exc3000_driver);
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCHv2 3/5] Input: EXC3000: add EXC80H60 and EXC80H84 support
  2020-05-19 18:24 [PATCHv2 0/5] EXC3000 Updates Sebastian Reichel
  2020-05-19 18:24 ` [PATCHv2 1/5] dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Sebastian Reichel
  2020-05-19 18:24 ` [PATCHv2 2/5] Input: EXC3000: switch to i2c's probe_new API Sebastian Reichel
@ 2020-05-19 18:24 ` Sebastian Reichel
  2020-05-19 23:52   ` kbuild test robot
  2020-05-19 18:24 ` [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version Sebastian Reichel
  2020-05-19 18:24 ` [PATCHv2 5/5] Input: EXC3000: Add reset gpio support Sebastian Reichel
  4 siblings, 1 reply; 12+ messages in thread
From: Sebastian Reichel @ 2020-05-19 18:24 UTC (permalink / raw)
  To: Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel, Sebastian Reichel

This adds support for EXC80H60 and EXCH84 controllers, which
use a different event type id and have two extra bits for the
resolution (so the maximum is 16K instead of 4K).

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../bindings/input/touchscreen/exc3000.yaml   |  5 +-
 drivers/input/touchscreen/exc3000.c           | 79 +++++++++++++++----
 2 files changed, 69 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
index 5d2e7496d6dd..d83b61e884df 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
@@ -14,7 +14,10 @@ allOf:
 
 properties:
   compatible:
-    const: eeti,exc3000
+    enum:
+      - eeti,exc3000
+      - eeti,exc80h60
+      - eeti,exc80h84
   reg:
     const: 0x2a
   interrupts:
diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
index 555a14305cd4..9622cba514b3 100644
--- a/drivers/input/touchscreen/exc3000.c
+++ b/drivers/input/touchscreen/exc3000.c
@@ -23,11 +23,43 @@
 #define EXC3000_SLOTS_PER_FRAME		5
 #define EXC3000_LEN_FRAME		66
 #define EXC3000_LEN_POINT		10
-#define EXC3000_MT_EVENT		6
+
+#define EXC3000_MT1_EVENT		0x06
+#define EXC3000_MT2_EVENT		0x18
+
 #define EXC3000_TIMEOUT_MS		100
 
+static const struct i2c_device_id exc3000_id[];
+
+struct eeti_dev_info {
+	const char *name;
+	int max_xy;
+};
+
+enum eeti_dev_id {
+	EETI_EXC3000,
+	EETI_EXC80H60,
+	EETI_EXC80H84,
+};
+
+static struct eeti_dev_info exc3000_info[] = {
+	[EETI_EXC3000] = {
+		.name = "EETI EXC3000 Touch Screen",
+		.max_xy = SZ_4K - 1,
+	},
+	[EETI_EXC80H60] = {
+		.name = "EETI EXC80H60 Touch Screen",
+		.max_xy = SZ_16K - 1,
+	},
+	[EETI_EXC80H84] = {
+		.name = "EETI EXC80H84 Touch Screen",
+		.max_xy = SZ_16K - 1,
+	},
+};
+
 struct exc3000_data {
 	struct i2c_client *client;
+	const struct eeti_dev_info *info;
 	struct input_dev *input;
 	struct touchscreen_properties prop;
 	struct timer_list timer;
@@ -58,10 +90,15 @@ static void exc3000_timer(struct timer_list *t)
 	input_sync(data->input);
 }
 
-static int exc3000_read_frame(struct i2c_client *client, u8 *buf)
+static int exc3000_read_frame(struct exc3000_data *data, u8 *buf)
 {
+	struct i2c_client *client = data->client;
+	u8 expected_event = EXC3000_MT1_EVENT;
 	int ret;
 
+	if (data->info->max_xy == SZ_16K - 1)
+		expected_event = EXC3000_MT2_EVENT;
+
 	ret = i2c_master_send(client, "'", 2);
 	if (ret < 0)
 		return ret;
@@ -76,19 +113,21 @@ static int exc3000_read_frame(struct i2c_client *client, u8 *buf)
 	if (ret != EXC3000_LEN_FRAME)
 		return -EIO;
 
-	if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME ||
-			buf[2] != EXC3000_MT_EVENT)
+	if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME)
+		return -EINVAL;
+
+	if (buf[2] != expected_event)
 		return -EINVAL;
 
 	return 0;
 }
 
-static int exc3000_read_data(struct i2c_client *client,
+static int exc3000_read_data(struct exc3000_data *data,
 			     u8 *buf, int *n_slots)
 {
 	int error;
 
-	error = exc3000_read_frame(client, buf);
+	error = exc3000_read_frame(data, buf);
 	if (error)
 		return error;
 
@@ -98,7 +137,7 @@ static int exc3000_read_data(struct i2c_client *client,
 
 	if (*n_slots > EXC3000_SLOTS_PER_FRAME) {
 		/* Read 2nd frame to get the rest of the contacts. */
-		error = exc3000_read_frame(client, buf + EXC3000_LEN_FRAME);
+		error = exc3000_read_frame(data, buf + EXC3000_LEN_FRAME);
 		if (error)
 			return error;
 
@@ -118,7 +157,7 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
 	int slots, total_slots;
 	int error;
 
-	error = exc3000_read_data(data->client, buf, &total_slots);
+	error = exc3000_read_data(data, buf, &total_slots);
 	if (error) {
 		/* Schedule a timer to release "stuck" contacts */
 		mod_timer(&data->timer,
@@ -149,13 +188,19 @@ static int exc3000_probe(struct i2c_client *client)
 {
 	struct exc3000_data *data;
 	struct input_dev *input;
-	int error;
+	int error, max_xy;
 
 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
 	data->client = client;
+	data->info = device_get_match_data(&client->dev);
+	if (!data->info) {
+		enum eeti_dev_id eeti_dev_id =
+			i2c_match_id(exc3000_id, client)->driver_data;
+		data->info = &exc3000_info[eeti_dev_id];
+	}
 	timer_setup(&data->timer, exc3000_timer, 0);
 
 	input = devm_input_allocate_device(&client->dev);
@@ -164,11 +209,13 @@ static int exc3000_probe(struct i2c_client *client)
 
 	data->input = input;
 
-	input->name = "EETI EXC3000 Touch Screen";
+	input->name = data->info->name;
 	input->id.bustype = BUS_I2C;
 
-	input_set_abs_params(input, ABS_MT_POSITION_X, 0, 4095, 0, 0);
-	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 4095, 0, 0);
+	max_xy = data->info->max_xy;
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0);
+
 	touchscreen_parse_properties(input, true, &data->prop);
 
 	error = input_mt_init_slots(input, EXC3000_NUM_SLOTS,
@@ -190,14 +237,18 @@ static int exc3000_probe(struct i2c_client *client)
 }
 
 static const struct i2c_device_id exc3000_id[] = {
-	{ "exc3000", 0 },
+	{ "exc3000", EETI_EXC3000 },
+	{ "exc80h60", EETI_EXC80H60 },
+	{ "exc80h84", EETI_EXC80H84 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, exc3000_id);
 
 #ifdef CONFIG_OF
 static const struct of_device_id exc3000_of_match[] = {
-	{ .compatible = "eeti,exc3000" },
+	{ .compatible = "eeti,exc3000", .data = &exc3000_info[EETI_EXC3000] },
+	{ .compatible = "eeti,exc80h60", .data = &exc3000_info[EETI_EXC80H60] },
+	{ .compatible = "eeti,exc80h84", .data = &exc3000_info[EETI_EXC80H84] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, exc3000_of_match);
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version
  2020-05-19 18:24 [PATCHv2 0/5] EXC3000 Updates Sebastian Reichel
                   ` (2 preceding siblings ...)
  2020-05-19 18:24 ` [PATCHv2 3/5] Input: EXC3000: add EXC80H60 and EXC80H84 support Sebastian Reichel
@ 2020-05-19 18:24 ` Sebastian Reichel
  2020-05-19 21:12   ` Enric Balletbo i Serra
  2020-05-20  4:38   ` kbuild test robot
  2020-05-19 18:24 ` [PATCHv2 5/5] Input: EXC3000: Add reset gpio support Sebastian Reichel
  4 siblings, 2 replies; 12+ messages in thread
From: Sebastian Reichel @ 2020-05-19 18:24 UTC (permalink / raw)
  To: Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel, Sebastian Reichel

Expose model and fw_version via sysfs. Also query the model
in probe to make sure, that the I2C communication with the
device works before successfully probing the driver.

This is a bit complicated, since EETI devices do not have
a sync interface. Sending the commands and directly reading
does not work. Sending the command and waiting for some time
is also not an option, since there might be touch events in
the mean time.

Last but not least we do not cache the results, since this
interface can be used to check the I2C communication is still
working as expected.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/input/touchscreen/exc3000.c | 138 +++++++++++++++++++++++++++-
 1 file changed, 137 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
index 9622cba514b3..1ae758bbf627 100644
--- a/drivers/input/touchscreen/exc3000.c
+++ b/drivers/input/touchscreen/exc3000.c
@@ -24,6 +24,9 @@
 #define EXC3000_LEN_FRAME		66
 #define EXC3000_LEN_POINT		10
 
+#define EXC3000_LEN_MODEL_NAME		16
+#define EXC3000_LEN_FW_VERSION		16
+
 #define EXC3000_MT1_EVENT		0x06
 #define EXC3000_MT2_EVENT		0x18
 
@@ -64,6 +67,11 @@ struct exc3000_data {
 	struct touchscreen_properties prop;
 	struct timer_list timer;
 	u8 buf[2 * EXC3000_LEN_FRAME];
+	struct completion wait_event;
+	struct mutex query_lock;
+	int query_result;
+	char model[EXC3000_LEN_MODEL_NAME];
+	char fw_version[EXC3000_LEN_FW_VERSION];
 };
 
 static void exc3000_report_slots(struct input_dev *input,
@@ -149,6 +157,28 @@ static int exc3000_read_data(struct exc3000_data *data,
 	return 0;
 }
 
+static int exc3000_query_interrupt(struct exc3000_data *data)
+{
+	u8 *buf = data->buf;
+	int err;
+
+	err = i2c_master_recv(data->client, buf, EXC3000_LEN_FRAME);
+	if (err < 0)
+		return err;
+
+	if (buf[0] != 0x42)
+		return -EPROTO;
+
+	if (buf[4] == 'E')
+		strlcpy(data->model, buf+5, sizeof(data->model));
+	else if (buf[4] == 'D')
+		strlcpy(data->fw_version, buf+5, sizeof(data->fw_version));
+	else
+		return -EPROTO;
+
+	return 0;
+}
+
 static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
 {
 	struct exc3000_data *data = dev_id;
@@ -157,6 +187,12 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
 	int slots, total_slots;
 	int error;
 
+	if (mutex_is_locked(&data->query_lock)) {
+		data->query_result = exc3000_query_interrupt(data);
+		complete(&data->wait_event);
+		goto out;
+	}
+
 	error = exc3000_read_data(data, buf, &total_slots);
 	if (error) {
 		/* Schedule a timer to release "stuck" contacts */
@@ -184,11 +220,94 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int fw_version_show(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct exc3000_data *data = dev_get_drvdata(dev);
+	static const u8 request[68] = {
+		0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'D', 0x00
+	};
+	struct i2c_client *client = data->client;
+	int err;
+
+	mutex_lock(&data->query_lock);
+
+	data->query_result = -ETIMEDOUT;
+	reinit_completion(&data->wait_event);
+
+	err = i2c_master_send(client, request, sizeof(request));
+	if (err < 0) {
+		mutex_unlock(&data->query_lock);
+		return err;
+	}
+
+	wait_for_completion_interruptible_timeout(&data->wait_event, 1*HZ);
+	mutex_unlock(&data->query_lock);
+
+	if (data->query_result < 0)
+		return data->query_result;
+
+	return sprintf(buf, "%s\n", data->fw_version);
+}
+static DEVICE_ATTR_RO(fw_version);
+
+static ssize_t exc3000_get_model(struct exc3000_data *data)
+{
+	static const u8 request[68] = {
+		0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'E', 0x00
+	};
+	struct i2c_client *client = data->client;
+	int err;
+
+	mutex_lock(&data->query_lock);
+	data->query_result = -ETIMEDOUT;
+	reinit_completion(&data->wait_event);
+
+	err = i2c_master_send(client, request, sizeof(request));
+	if (err < 0) {
+		mutex_unlock(&data->query_lock);
+		return err;
+	}
+
+	wait_for_completion_interruptible_timeout(&data->wait_event, 1 * HZ);
+	mutex_unlock(&data->query_lock);
+
+	return data->query_result;
+}
+
+static ssize_t model_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct exc3000_data *data = dev_get_drvdata(dev);
+	int err = exc3000_get_model(data);
+
+	if (err < 0)
+		return err;
+
+	return sprintf(buf, "%s\n", data->model);
+}
+static DEVICE_ATTR_RO(model);
+
+static struct attribute *sysfs_attrs[] = {
+	&dev_attr_fw_version.attr,
+	&dev_attr_model.attr,
+	NULL
+};
+
+static struct attribute_group exc3000_attribute_group = {
+	.attrs = sysfs_attrs
+};
+
+static const struct attribute_group *exc3000_attribute_groups[] = {
+	&exc3000_attribute_group,
+	NULL
+};
+
 static int exc3000_probe(struct i2c_client *client)
 {
 	struct exc3000_data *data;
 	struct input_dev *input;
-	int error, max_xy;
+	int error, max_xy, retry;
 
 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
@@ -202,15 +321,19 @@ static int exc3000_probe(struct i2c_client *client)
 		data->info = &exc3000_info[eeti_dev_id];
 	}
 	timer_setup(&data->timer, exc3000_timer, 0);
+	init_completion(&data->wait_event);
+	mutex_init(&data->query_lock);
 
 	input = devm_input_allocate_device(&client->dev);
 	if (!input)
 		return -ENOMEM;
 
 	data->input = input;
+	input_set_drvdata(input, data);
 
 	input->name = data->info->name;
 	input->id.bustype = BUS_I2C;
+	input->dev.groups = exc3000_attribute_groups;
 
 	max_xy = data->info->max_xy;
 	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
@@ -233,6 +356,19 @@ static int exc3000_probe(struct i2c_client *client)
 	if (error)
 		return error;
 
+	for (retry = 0; retry < 3; ++retry) {
+		error = exc3000_get_model(data);
+		if (!error)
+			break;
+		dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n",
+			 retry + 1, error);
+	}
+
+	if (error)
+		return error;
+
+	dev_dbg(&client->dev, "TS Model: %s", data->model);
+
 	return 0;
 }
 
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCHv2 5/5] Input: EXC3000: Add reset gpio support
  2020-05-19 18:24 [PATCHv2 0/5] EXC3000 Updates Sebastian Reichel
                   ` (3 preceding siblings ...)
  2020-05-19 18:24 ` [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version Sebastian Reichel
@ 2020-05-19 18:24 ` Sebastian Reichel
  2020-05-19 20:57   ` Enric Balletbo i Serra
  4 siblings, 1 reply; 12+ messages in thread
From: Sebastian Reichel @ 2020-05-19 18:24 UTC (permalink / raw)
  To: Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel, Sebastian Reichel

Add basic support for an optional reset gpio.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../bindings/input/touchscreen/exc3000.yaml   |  2 ++
 drivers/input/touchscreen/exc3000.c           | 29 +++++++++++++++----
 2 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
index d83b61e884df..8b70b918c7ca 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
@@ -22,6 +22,8 @@ properties:
     const: 0x2a
   interrupts:
     maxItems: 1
+  reset-gpios:
+    maxItems: 1
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-inverted-x: true
diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
index 1ae758bbf627..9fed66ef1719 100644
--- a/drivers/input/touchscreen/exc3000.c
+++ b/drivers/input/touchscreen/exc3000.c
@@ -8,7 +8,9 @@
  */
 
 #include <linux/bitops.h>
+#include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
@@ -32,6 +34,9 @@
 
 #define EXC3000_TIMEOUT_MS		100
 
+#define EXC3000_RESET_MS		10
+#define EXC3000_READY_MS		100
+
 static const struct i2c_device_id exc3000_id[];
 
 struct eeti_dev_info {
@@ -65,6 +70,7 @@ struct exc3000_data {
 	const struct eeti_dev_info *info;
 	struct input_dev *input;
 	struct touchscreen_properties prop;
+	struct gpio_desc *reset;
 	struct timer_list timer;
 	u8 buf[2 * EXC3000_LEN_FRAME];
 	struct completion wait_event;
@@ -305,16 +311,17 @@ static const struct attribute_group *exc3000_attribute_groups[] = {
 
 static int exc3000_probe(struct i2c_client *client)
 {
+	struct device *dev = &client->dev;
 	struct exc3000_data *data;
 	struct input_dev *input;
 	int error, max_xy, retry;
 
-	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
 	data->client = client;
-	data->info = device_get_match_data(&client->dev);
+	data->info = device_get_match_data(dev);
 	if (!data->info) {
 		enum eeti_dev_id eeti_dev_id =
 			i2c_match_id(exc3000_id, client)->driver_data;
@@ -324,7 +331,17 @@ static int exc3000_probe(struct i2c_client *client)
 	init_completion(&data->wait_event);
 	mutex_init(&data->query_lock);
 
-	input = devm_input_allocate_device(&client->dev);
+	data->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->reset))
+		return PTR_ERR(data->reset);
+
+	if (data->reset) {
+		msleep(EXC3000_RESET_MS);
+		gpiod_set_value_cansleep(data->reset, 0);
+		msleep(EXC3000_READY_MS);
+	}
+
+	input = devm_input_allocate_device(dev);
 	if (!input)
 		return -ENOMEM;
 
@@ -350,7 +367,7 @@ static int exc3000_probe(struct i2c_client *client)
 	if (error)
 		return error;
 
-	error = devm_request_threaded_irq(&client->dev, client->irq,
+	error = devm_request_threaded_irq(dev, client->irq,
 					  NULL, exc3000_interrupt, IRQF_ONESHOT,
 					  client->name, data);
 	if (error)
@@ -360,14 +377,14 @@ static int exc3000_probe(struct i2c_client *client)
 		error = exc3000_get_model(data);
 		if (!error)
 			break;
-		dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n",
+		dev_warn(dev, "Retry %d get EETI EXC3000 model: %d\n",
 			 retry + 1, error);
 	}
 
 	if (error)
 		return error;
 
-	dev_dbg(&client->dev, "TS Model: %s", data->model);
+	dev_dbg(dev, "TS Model: %s", data->model);
 
 	return 0;
 }
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCHv2 1/5] dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
  2020-05-19 18:24 ` [PATCHv2 1/5] dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Sebastian Reichel
@ 2020-05-19 20:38   ` Enric Balletbo i Serra
  0 siblings, 0 replies; 12+ messages in thread
From: Enric Balletbo i Serra @ 2020-05-19 20:38 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel

Hi Sebastian,

A minor thing.

On 19/5/20 20:24, Sebastian Reichel wrote:
> Convert the EETI EXC3000 binding to DT schema format using json-schema
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  .../bindings/input/touchscreen/exc3000.txt    | 26 ---------
>  .../bindings/input/touchscreen/exc3000.yaml   | 53 +++++++++++++++++++

The binding name should start with the vendor, aka eeti,exc3000.yaml

>  2 files changed, 53 insertions(+), 26 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
> deleted file mode 100644
> index 68291b94fec2..000000000000
> --- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt
> +++ /dev/null
> @@ -1,26 +0,0 @@
> -* EETI EXC3000 Multiple Touch Controller
> -
> -Required properties:
> -- compatible: must be "eeti,exc3000"
> -- reg: i2c slave address
> -- interrupts: touch controller interrupt
> -- touchscreen-size-x: See touchscreen.txt
> -- touchscreen-size-y: See touchscreen.txt
> -
> -Optional properties:
> -- touchscreen-inverted-x: See touchscreen.txt
> -- touchscreen-inverted-y: See touchscreen.txt
> -- touchscreen-swapped-x-y: See touchscreen.txt
> -
> -Example:
> -
> -	touchscreen@2a {
> -		compatible = "eeti,exc3000";
> -		reg = <0x2a>;
> -		interrupt-parent = <&gpio1>;
> -		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
> -		touchscreen-size-x = <4096>;
> -		touchscreen-size-y = <4096>;
> -		touchscreen-inverted-x;
> -		touchscreen-swapped-x-y;
> -	};
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
> new file mode 100644
> index 000000000000..5d2e7496d6dd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/exc3000.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: EETI EXC3000 series touchscreen controller
> +
> +maintainers:
> +  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
> +
> +allOf:
> +  - $ref: touchscreen.yaml#
> +
> +properties:
> +  compatible:
> +    const: eeti,exc3000
> +  reg:
> +    const: 0x2a
> +  interrupts:
> +    maxItems: 1
> +  touchscreen-size-x: true
> +  touchscreen-size-y: true
> +  touchscreen-inverted-x: true
> +  touchscreen-inverted-y: true
> +  touchscreen-swapped-x-y: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - touchscreen-size-x
> +  - touchscreen-size-y
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include "dt-bindings/interrupt-controller/irq.h"
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        touchscreen@2a {
> +                compatible = "eeti,exc3000";
> +                reg = <0x2a>;
> +                interrupt-parent = <&gpio1>;
> +                interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
> +                touchscreen-size-x = <4096>;
> +                touchscreen-size-y = <4096>;
> +                touchscreen-inverted-x;
> +                touchscreen-swapped-x-y;
> +        };
> +    };
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCHv2 5/5] Input: EXC3000: Add reset gpio support
  2020-05-19 18:24 ` [PATCHv2 5/5] Input: EXC3000: Add reset gpio support Sebastian Reichel
@ 2020-05-19 20:57   ` Enric Balletbo i Serra
  0 siblings, 0 replies; 12+ messages in thread
From: Enric Balletbo i Serra @ 2020-05-19 20:57 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel

Hi Sebastian,

Again a minor thing

On 19/5/20 20:24, Sebastian Reichel wrote:
> Add basic support for an optional reset gpio.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  .../bindings/input/touchscreen/exc3000.yaml   |  2 ++
>  drivers/input/touchscreen/exc3000.c           | 29 +++++++++++++++----
>  2 files changed, 25 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
> index d83b61e884df..8b70b918c7ca 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.yaml
> @@ -22,6 +22,8 @@ properties:
>      const: 0x2a
>    interrupts:
>      maxItems: 1
> +  reset-gpios:
> +    maxItems: 1
>    touchscreen-size-x: true
>    touchscreen-size-y: true
>    touchscreen-inverted-x: true
> diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
> index 1ae758bbf627..9fed66ef1719 100644
> --- a/drivers/input/touchscreen/exc3000.c
> +++ b/drivers/input/touchscreen/exc3000.c
> @@ -8,7 +8,9 @@
>   */
>  
>  #include <linux/bitops.h>
> +#include <linux/delay.h>
>  #include <linux/device.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
>  #include <linux/input.h>
>  #include <linux/input/mt.h>
> @@ -32,6 +34,9 @@
>  
>  #define EXC3000_TIMEOUT_MS		100
>  
> +#define EXC3000_RESET_MS		10
> +#define EXC3000_READY_MS		100
> +
>  static const struct i2c_device_id exc3000_id[];
>  
>  struct eeti_dev_info {
> @@ -65,6 +70,7 @@ struct exc3000_data {
>  	const struct eeti_dev_info *info;
>  	struct input_dev *input;
>  	struct touchscreen_properties prop;
> +	struct gpio_desc *reset;
>  	struct timer_list timer;
>  	u8 buf[2 * EXC3000_LEN_FRAME];
>  	struct completion wait_event;
> @@ -305,16 +311,17 @@ static const struct attribute_group *exc3000_attribute_groups[] = {
>  
>  static int exc3000_probe(struct i2c_client *client)
>  {
> +	struct device *dev = &client->dev;

This introduces more changes to the patch than the required. Is not that I am
against of this change but since what you are doing here is introduce an
optional reset I think would be better just introduce that change.

>  	struct exc3000_data *data;
>  	struct input_dev *input;
>  	int error, max_xy, retry;
>  
> -	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>  	if (!data)
>  		return -ENOMEM;
>  
>  	data->client = client;
> -	data->info = device_get_match_data(&client->dev);
> +	data->info = device_get_match_data(dev);
>  	if (!data->info) {
>  		enum eeti_dev_id eeti_dev_id =
>  			i2c_match_id(exc3000_id, client)->driver_data;
> @@ -324,7 +331,17 @@ static int exc3000_probe(struct i2c_client *client)
>  	init_completion(&data->wait_event);
>  	mutex_init(&data->query_lock);
>  
> -	input = devm_input_allocate_device(&client->dev);
> +	data->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);

nit: Just use &client->dev here ?

> +	if (IS_ERR(data->reset))
> +		return PTR_ERR(data->reset);
> +
> +	if (data->reset) {
> +		msleep(EXC3000_RESET_MS);
> +		gpiod_set_value_cansleep(data->reset, 0);
> +		msleep(EXC3000_READY_MS);
> +	}
> +
> +	input = devm_input_allocate_device(dev);
>  	if (!input)
>  		return -ENOMEM;
>  
> @@ -350,7 +367,7 @@ static int exc3000_probe(struct i2c_client *client)
>  	if (error)
>  		return error;
>  
> -	error = devm_request_threaded_irq(&client->dev, client->irq,
> +	error = devm_request_threaded_irq(dev, client->irq,
>  					  NULL, exc3000_interrupt, IRQF_ONESHOT,
>  					  client->name, data);
>  	if (error)
> @@ -360,14 +377,14 @@ static int exc3000_probe(struct i2c_client *client)
>  		error = exc3000_get_model(data);
>  		if (!error)
>  			break;
> -		dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n",
> +		dev_warn(dev, "Retry %d get EETI EXC3000 model: %d\n",
>  			 retry + 1, error);
>  	}
>  
>  	if (error)
>  		return error;
>  
> -	dev_dbg(&client->dev, "TS Model: %s", data->model);
> +	dev_dbg(dev, "TS Model: %s", data->model);
>  
>  	return 0;
>  }
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version
  2020-05-19 18:24 ` [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version Sebastian Reichel
@ 2020-05-19 21:12   ` Enric Balletbo i Serra
  2020-05-19 21:31     ` Sebastian Reichel
  2020-05-20  4:38   ` kbuild test robot
  1 sibling, 1 reply; 12+ messages in thread
From: Enric Balletbo i Serra @ 2020-05-19 21:12 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: linux-input, linux-kernel, kernel

Hi Sebastian,

On 19/5/20 20:24, Sebastian Reichel wrote:
> Expose model and fw_version via sysfs. Also query the model
> in probe to make sure, that the I2C communication with the
> device works before successfully probing the driver.
> 
> This is a bit complicated, since EETI devices do not have
> a sync interface. Sending the commands and directly reading
> does not work. Sending the command and waiting for some time
> is also not an option, since there might be touch events in
> the mean time.
> 
> Last but not least we do not cache the results, since this
> interface can be used to check the I2C communication is still
> working as expected.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  drivers/input/touchscreen/exc3000.c | 138 +++++++++++++++++++++++++++-
>  1 file changed, 137 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
> index 9622cba514b3..1ae758bbf627 100644
> --- a/drivers/input/touchscreen/exc3000.c
> +++ b/drivers/input/touchscreen/exc3000.c
> @@ -24,6 +24,9 @@
>  #define EXC3000_LEN_FRAME		66
>  #define EXC3000_LEN_POINT		10
>  
> +#define EXC3000_LEN_MODEL_NAME		16
> +#define EXC3000_LEN_FW_VERSION		16
> +
>  #define EXC3000_MT1_EVENT		0x06
>  #define EXC3000_MT2_EVENT		0x18
>  
> @@ -64,6 +67,11 @@ struct exc3000_data {
>  	struct touchscreen_properties prop;
>  	struct timer_list timer;
>  	u8 buf[2 * EXC3000_LEN_FRAME];
> +	struct completion wait_event;
> +	struct mutex query_lock;
> +	int query_result;
> +	char model[EXC3000_LEN_MODEL_NAME];
> +	char fw_version[EXC3000_LEN_FW_VERSION];
>  };
>  
>  static void exc3000_report_slots(struct input_dev *input,
> @@ -149,6 +157,28 @@ static int exc3000_read_data(struct exc3000_data *data,
>  	return 0;
>  }
>  
> +static int exc3000_query_interrupt(struct exc3000_data *data)
> +{
> +	u8 *buf = data->buf;
> +	int err;
> +
> +	err = i2c_master_recv(data->client, buf, EXC3000_LEN_FRAME);
> +	if (err < 0)
> +		return err;
> +
> +	if (buf[0] != 0x42)
> +		return -EPROTO;
> +
> +	if (buf[4] == 'E')
> +		strlcpy(data->model, buf+5, sizeof(data->model));
> +	else if (buf[4] == 'D')
> +		strlcpy(data->fw_version, buf+5, sizeof(data->fw_version));
> +	else
> +		return -EPROTO;
> +
> +	return 0;
> +}
> +
>  static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
>  {
>  	struct exc3000_data *data = dev_id;
> @@ -157,6 +187,12 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
>  	int slots, total_slots;
>  	int error;
>  
> +	if (mutex_is_locked(&data->query_lock)) {
> +		data->query_result = exc3000_query_interrupt(data);
> +		complete(&data->wait_event);
> +		goto out;
> +	}
> +
>  	error = exc3000_read_data(data, buf, &total_slots);
>  	if (error) {
>  		/* Schedule a timer to release "stuck" contacts */
> @@ -184,11 +220,94 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
>  
> +static int fw_version_show(struct device *dev,
> +			   struct device_attribute *attr, char *buf)
> +{
> +	struct exc3000_data *data = dev_get_drvdata(dev);
> +	static const u8 request[68] = {
> +		0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'D', 0x00
> +	};
> +	struct i2c_client *client = data->client;
> +	int err;
> +
> +	mutex_lock(&data->query_lock);
> +
> +	data->query_result = -ETIMEDOUT;
> +	reinit_completion(&data->wait_event);
> +
> +	err = i2c_master_send(client, request, sizeof(request));
> +	if (err < 0) {
> +		mutex_unlock(&data->query_lock);
> +		return err;
> +	}
> +
> +	wait_for_completion_interruptible_timeout(&data->wait_event, 1*HZ);
> +	mutex_unlock(&data->query_lock);
> +
> +	if (data->query_result < 0)
> +		return data->query_result;
> +
> +	return sprintf(buf, "%s\n", data->fw_version);
> +}
> +static DEVICE_ATTR_RO(fw_version);
> +

You should probably document the new sysfs entries, although are self-explanatory.

> +static ssize_t exc3000_get_model(struct exc3000_data *data)
> +{
> +	static const u8 request[68] = {
> +		0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'E', 0x00
> +	};
> +	struct i2c_client *client = data->client;
> +	int err;
> +
> +	mutex_lock(&data->query_lock);
> +	data->query_result = -ETIMEDOUT;
> +	reinit_completion(&data->wait_event);
> +
> +	err = i2c_master_send(client, request, sizeof(request));
> +	if (err < 0) {
> +		mutex_unlock(&data->query_lock);
> +		return err;
> +	}
> +
> +	wait_for_completion_interruptible_timeout(&data->wait_event, 1 * HZ);
> +	mutex_unlock(&data->query_lock);
> +
> +	return data->query_result;
> +}
> +
> +static ssize_t model_show(struct device *dev,
> +			  struct device_attribute *attr, char *buf)
> +{
> +	struct exc3000_data *data = dev_get_drvdata(dev);
> +	int err = exc3000_get_model(data);
> +
> +	if (err < 0)
> +		return err;
> +
> +	return sprintf(buf, "%s\n", data->model);
> +}
> +static DEVICE_ATTR_RO(model);
> +
> +static struct attribute *sysfs_attrs[] = {
> +	&dev_attr_fw_version.attr,
> +	&dev_attr_model.attr,
> +	NULL
> +};
> +
> +static struct attribute_group exc3000_attribute_group = {
> +	.attrs = sysfs_attrs
> +};
> +
> +static const struct attribute_group *exc3000_attribute_groups[] = {
> +	&exc3000_attribute_group,
> +	NULL
> +};
> +
>  static int exc3000_probe(struct i2c_client *client)
>  {
>  	struct exc3000_data *data;
>  	struct input_dev *input;
> -	int error, max_xy;
> +	int error, max_xy, retry;
>  
>  	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
>  	if (!data)
> @@ -202,15 +321,19 @@ static int exc3000_probe(struct i2c_client *client)
>  		data->info = &exc3000_info[eeti_dev_id];
>  	}
>  	timer_setup(&data->timer, exc3000_timer, 0);
> +	init_completion(&data->wait_event);
> +	mutex_init(&data->query_lock);
>  
>  	input = devm_input_allocate_device(&client->dev);
>  	if (!input)
>  		return -ENOMEM;
>  
>  	data->input = input;
> +	input_set_drvdata(input, data);
>  
>  	input->name = data->info->name;
>  	input->id.bustype = BUS_I2C;
> +	input->dev.groups = exc3000_attribute_groups;
>  
>  	max_xy = data->info->max_xy;
>  	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
> @@ -233,6 +356,19 @@ static int exc3000_probe(struct i2c_client *client)
>  	if (error)
>  		return error;
>  
> +	for (retry = 0; retry < 3; ++retry) {

Just curious, is it known to fail and need retries?

> +		error = exc3000_get_model(data);
> +		if (!error)
> +			break;
> +		dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n",
> +			 retry + 1, error);
> +	}
> +
> +	if (error)
> +		return error;
> +
> +	dev_dbg(&client->dev, "TS Model: %s", data->model);
> +
>  	return 0;
>  }
>  
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version
  2020-05-19 21:12   ` Enric Balletbo i Serra
@ 2020-05-19 21:31     ` Sebastian Reichel
  0 siblings, 0 replies; 12+ messages in thread
From: Sebastian Reichel @ 2020-05-19 21:31 UTC (permalink / raw)
  To: Enric Balletbo i Serra
  Cc: Dmitry Torokhov, Ahmet Inan, Martin Fuzzey, linux-input,
	linux-kernel, kernel

[-- Attachment #1: Type: text/plain, Size: 7753 bytes --]

Hi,

On Tue, May 19, 2020 at 11:12:16PM +0200, Enric Balletbo i Serra wrote:
> On 19/5/20 20:24, Sebastian Reichel wrote:
> > Expose model and fw_version via sysfs. Also query the model
> > in probe to make sure, that the I2C communication with the
> > device works before successfully probing the driver.
> > 
> > This is a bit complicated, since EETI devices do not have
> > a sync interface. Sending the commands and directly reading
> > does not work. Sending the command and waiting for some time
> > is also not an option, since there might be touch events in
> > the mean time.
> > 
> > Last but not least we do not cache the results, since this
> > interface can be used to check the I2C communication is still
> > working as expected.
> > 
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> > ---
> >  drivers/input/touchscreen/exc3000.c | 138 +++++++++++++++++++++++++++-
> >  1 file changed, 137 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
> > index 9622cba514b3..1ae758bbf627 100644
> > --- a/drivers/input/touchscreen/exc3000.c
> > +++ b/drivers/input/touchscreen/exc3000.c
> > @@ -24,6 +24,9 @@
> >  #define EXC3000_LEN_FRAME		66
> >  #define EXC3000_LEN_POINT		10
> >  
> > +#define EXC3000_LEN_MODEL_NAME		16
> > +#define EXC3000_LEN_FW_VERSION		16
> > +
> >  #define EXC3000_MT1_EVENT		0x06
> >  #define EXC3000_MT2_EVENT		0x18
> >  
> > @@ -64,6 +67,11 @@ struct exc3000_data {
> >  	struct touchscreen_properties prop;
> >  	struct timer_list timer;
> >  	u8 buf[2 * EXC3000_LEN_FRAME];
> > +	struct completion wait_event;
> > +	struct mutex query_lock;
> > +	int query_result;
> > +	char model[EXC3000_LEN_MODEL_NAME];
> > +	char fw_version[EXC3000_LEN_FW_VERSION];
> >  };
> >  
> >  static void exc3000_report_slots(struct input_dev *input,
> > @@ -149,6 +157,28 @@ static int exc3000_read_data(struct exc3000_data *data,
> >  	return 0;
> >  }
> >  
> > +static int exc3000_query_interrupt(struct exc3000_data *data)
> > +{
> > +	u8 *buf = data->buf;
> > +	int err;
> > +
> > +	err = i2c_master_recv(data->client, buf, EXC3000_LEN_FRAME);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	if (buf[0] != 0x42)
> > +		return -EPROTO;
> > +
> > +	if (buf[4] == 'E')
> > +		strlcpy(data->model, buf+5, sizeof(data->model));
> > +	else if (buf[4] == 'D')
> > +		strlcpy(data->fw_version, buf+5, sizeof(data->fw_version));
> > +	else
> > +		return -EPROTO;
> > +
> > +	return 0;
> > +}
> > +
> >  static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
> >  {
> >  	struct exc3000_data *data = dev_id;
> > @@ -157,6 +187,12 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
> >  	int slots, total_slots;
> >  	int error;
> >  
> > +	if (mutex_is_locked(&data->query_lock)) {
> > +		data->query_result = exc3000_query_interrupt(data);
> > +		complete(&data->wait_event);
> > +		goto out;
> > +	}
> > +
> >  	error = exc3000_read_data(data, buf, &total_slots);
> >  	if (error) {
> >  		/* Schedule a timer to release "stuck" contacts */
> > @@ -184,11 +220,94 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
> >  	return IRQ_HANDLED;
> >  }
> >  
> > +static int fw_version_show(struct device *dev,
> > +			   struct device_attribute *attr, char *buf)
> > +{
> > +	struct exc3000_data *data = dev_get_drvdata(dev);
> > +	static const u8 request[68] = {
> > +		0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'D', 0x00
> > +	};
> > +	struct i2c_client *client = data->client;
> > +	int err;
> > +
> > +	mutex_lock(&data->query_lock);
> > +
> > +	data->query_result = -ETIMEDOUT;
> > +	reinit_completion(&data->wait_event);
> > +
> > +	err = i2c_master_send(client, request, sizeof(request));
> > +	if (err < 0) {
> > +		mutex_unlock(&data->query_lock);
> > +		return err;
> > +	}
> > +
> > +	wait_for_completion_interruptible_timeout(&data->wait_event, 1*HZ);
> > +	mutex_unlock(&data->query_lock);
> > +
> > +	if (data->query_result < 0)
> > +		return data->query_result;
> > +
> > +	return sprintf(buf, "%s\n", data->fw_version);
> > +}
> > +static DEVICE_ATTR_RO(fw_version);
> > +
> 
> You should probably document the new sysfs entries, although are
> self-explanatory.

I suppose I could create
Documentation/ABI/testing/sysfs-driver-input-exc3000 or is there a
better place for sysfs API documentation of input devices?

> > +static ssize_t exc3000_get_model(struct exc3000_data *data)
> > +{
> > +	static const u8 request[68] = {
> > +		0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'E', 0x00
> > +	};
> > +	struct i2c_client *client = data->client;
> > +	int err;
> > +
> > +	mutex_lock(&data->query_lock);
> > +	data->query_result = -ETIMEDOUT;
> > +	reinit_completion(&data->wait_event);
> > +
> > +	err = i2c_master_send(client, request, sizeof(request));
> > +	if (err < 0) {
> > +		mutex_unlock(&data->query_lock);
> > +		return err;
> > +	}
> > +
> > +	wait_for_completion_interruptible_timeout(&data->wait_event, 1 * HZ);
> > +	mutex_unlock(&data->query_lock);
> > +
> > +	return data->query_result;
> > +}
> > +
> > +static ssize_t model_show(struct device *dev,
> > +			  struct device_attribute *attr, char *buf)
> > +{
> > +	struct exc3000_data *data = dev_get_drvdata(dev);
> > +	int err = exc3000_get_model(data);
> > +
> > +	if (err < 0)
> > +		return err;
> > +
> > +	return sprintf(buf, "%s\n", data->model);
> > +}
> > +static DEVICE_ATTR_RO(model);
> > +
> > +static struct attribute *sysfs_attrs[] = {
> > +	&dev_attr_fw_version.attr,
> > +	&dev_attr_model.attr,
> > +	NULL
> > +};
> > +
> > +static struct attribute_group exc3000_attribute_group = {
> > +	.attrs = sysfs_attrs
> > +};
> > +
> > +static const struct attribute_group *exc3000_attribute_groups[] = {
> > +	&exc3000_attribute_group,
> > +	NULL
> > +};
> > +
> >  static int exc3000_probe(struct i2c_client *client)
> >  {
> >  	struct exc3000_data *data;
> >  	struct input_dev *input;
> > -	int error, max_xy;
> > +	int error, max_xy, retry;
> >  
> >  	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> >  	if (!data)
> > @@ -202,15 +321,19 @@ static int exc3000_probe(struct i2c_client *client)
> >  		data->info = &exc3000_info[eeti_dev_id];
> >  	}
> >  	timer_setup(&data->timer, exc3000_timer, 0);
> > +	init_completion(&data->wait_event);
> > +	mutex_init(&data->query_lock);
> >  
> >  	input = devm_input_allocate_device(&client->dev);
> >  	if (!input)
> >  		return -ENOMEM;
> >  
> >  	data->input = input;
> > +	input_set_drvdata(input, data);
> >  
> >  	input->name = data->info->name;
> >  	input->id.bustype = BUS_I2C;
> > +	input->dev.groups = exc3000_attribute_groups;
> >  
> >  	max_xy = data->info->max_xy;
> >  	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
> > @@ -233,6 +356,19 @@ static int exc3000_probe(struct i2c_client *client)
> >  	if (error)
> >  		return error;
> >  
> > +	for (retry = 0; retry < 3; ++retry) {
> 
> Just curious, is it known to fail and need retries?

No, but a single I²C transmission can always go bad and in that case
it makes sense to recover instead of failing to load the driver. Other
buses (e.g. PCI) handle this transparently, but I²C does not.

-- Sebastian

> 
> > +		error = exc3000_get_model(data);
> > +		if (!error)
> > +			break;
> > +		dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n",
> > +			 retry + 1, error);
> > +	}
> > +
> > +	if (error)
> > +		return error;
> > +
> > +	dev_dbg(&client->dev, "TS Model: %s", data->model);
> > +
> >  	return 0;
> >  }
> >  
> > 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCHv2 3/5] Input: EXC3000: add EXC80H60 and EXC80H84 support
  2020-05-19 18:24 ` [PATCHv2 3/5] Input: EXC3000: add EXC80H60 and EXC80H84 support Sebastian Reichel
@ 2020-05-19 23:52   ` kbuild test robot
  0 siblings, 0 replies; 12+ messages in thread
From: kbuild test robot @ 2020-05-19 23:52 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: kbuild-all, linux-input, linux-kernel, kernel, Sebastian Reichel

[-- Attachment #1: Type: text/plain, Size: 6716 bytes --]

Hi Sebastian,

I love your patch! Perhaps something to improve:

[auto build test WARNING on input/next]
[also build test WARNING on v5.7-rc6 next-20200519]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Sebastian-Reichel/EXC3000-Updates/20200520-023207
base:   https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git next
config: openrisc-randconfig-r024-20200519 (attached as .config)
compiler: or1k-linux-gcc (GCC) 9.3.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=openrisc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp@intel.com>

All warnings (new ones prefixed by >>, old ones prefixed by <<):

drivers/input/touchscreen/exc3000.c:48:13: error: 'SZ_4K' undeclared here (not in a function)
48 |   .max_xy = SZ_4K - 1,
|             ^~~~~
drivers/input/touchscreen/exc3000.c:52:13: error: 'SZ_16K' undeclared here (not in a function)
52 |   .max_xy = SZ_16K - 1,
|             ^~~~~~
In file included from arch/openrisc/include/asm/bitops.h:25,
from include/linux/bitops.h:29,
from drivers/input/touchscreen/exc3000.c:10:
drivers/input/touchscreen/exc3000.c: In function 'exc3000_read_frame':
drivers/input/touchscreen/exc3000.c:99:25: warning: comparison between pointer and integer
99 |  if (data->info->max_xy == SZ_16K - 1)
|                         ^~
include/linux/compiler.h:58:52: note: in definition of macro '__trace_if_var'
58 | #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
|                                                    ^~~~
>> drivers/input/touchscreen/exc3000.c:99:2: note: in expansion of macro 'if'
99 |  if (data->info->max_xy == SZ_16K - 1)
|  ^~
drivers/input/touchscreen/exc3000.c:99:25: warning: comparison between pointer and integer
99 |  if (data->info->max_xy == SZ_16K - 1)
|                         ^~
include/linux/compiler.h:58:61: note: in definition of macro '__trace_if_var'
58 | #define __trace_if_var(cond) (__builtin_constant_p(cond) ? (cond) : __trace_if_value(cond))
|                                                             ^~~~
>> drivers/input/touchscreen/exc3000.c:99:2: note: in expansion of macro 'if'
99 |  if (data->info->max_xy == SZ_16K - 1)
|  ^~
drivers/input/touchscreen/exc3000.c:99:25: warning: comparison between pointer and integer
99 |  if (data->info->max_xy == SZ_16K - 1)
|                         ^~
include/linux/compiler.h:69:3: note: in definition of macro '__trace_if_value'
69 |  (cond) ?              |   ^~~~
include/linux/compiler.h:56:28: note: in expansion of macro '__trace_if_var'
56 | #define if(cond, ...) if ( __trace_if_var( !!(cond , ## __VA_ARGS__) ) )
|                            ^~~~~~~~~~~~~~
>> drivers/input/touchscreen/exc3000.c:99:2: note: in expansion of macro 'if'
99 |  if (data->info->max_xy == SZ_16K - 1)
|  ^~

vim +/if +99 drivers/input/touchscreen/exc3000.c

  > 10	#include <linux/bitops.h>
    11	#include <linux/device.h>
    12	#include <linux/i2c.h>
    13	#include <linux/input.h>
    14	#include <linux/input/mt.h>
    15	#include <linux/input/touchscreen.h>
    16	#include <linux/interrupt.h>
    17	#include <linux/module.h>
    18	#include <linux/of.h>
    19	#include <linux/timer.h>
    20	#include <asm/unaligned.h>
    21	
    22	#define EXC3000_NUM_SLOTS		10
    23	#define EXC3000_SLOTS_PER_FRAME		5
    24	#define EXC3000_LEN_FRAME		66
    25	#define EXC3000_LEN_POINT		10
    26	
    27	#define EXC3000_MT1_EVENT		0x06
    28	#define EXC3000_MT2_EVENT		0x18
    29	
    30	#define EXC3000_TIMEOUT_MS		100
    31	
    32	static const struct i2c_device_id exc3000_id[];
    33	
    34	struct eeti_dev_info {
    35		const char *name;
    36		int max_xy;
    37	};
    38	
    39	enum eeti_dev_id {
    40		EETI_EXC3000,
    41		EETI_EXC80H60,
    42		EETI_EXC80H84,
    43	};
    44	
    45	static struct eeti_dev_info exc3000_info[] = {
    46		[EETI_EXC3000] = {
    47			.name = "EETI EXC3000 Touch Screen",
    48			.max_xy = SZ_4K - 1,
    49		},
    50		[EETI_EXC80H60] = {
    51			.name = "EETI EXC80H60 Touch Screen",
    52			.max_xy = SZ_16K - 1,
    53		},
    54		[EETI_EXC80H84] = {
    55			.name = "EETI EXC80H84 Touch Screen",
    56			.max_xy = SZ_16K - 1,
    57		},
    58	};
    59	
    60	struct exc3000_data {
    61		struct i2c_client *client;
    62		const struct eeti_dev_info *info;
    63		struct input_dev *input;
    64		struct touchscreen_properties prop;
    65		struct timer_list timer;
    66		u8 buf[2 * EXC3000_LEN_FRAME];
    67	};
    68	
    69	static void exc3000_report_slots(struct input_dev *input,
    70					 struct touchscreen_properties *prop,
    71					 const u8 *buf, int num)
    72	{
    73		for (; num--; buf += EXC3000_LEN_POINT) {
    74			if (buf[0] & BIT(0)) {
    75				input_mt_slot(input, buf[1]);
    76				input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
    77				touchscreen_report_pos(input, prop,
    78						       get_unaligned_le16(buf + 2),
    79						       get_unaligned_le16(buf + 4),
    80						       true);
    81			}
    82		}
    83	}
    84	
    85	static void exc3000_timer(struct timer_list *t)
    86	{
    87		struct exc3000_data *data = from_timer(data, t, timer);
    88	
    89		input_mt_sync_frame(data->input);
    90		input_sync(data->input);
    91	}
    92	
    93	static int exc3000_read_frame(struct exc3000_data *data, u8 *buf)
    94	{
    95		struct i2c_client *client = data->client;
    96		u8 expected_event = EXC3000_MT1_EVENT;
    97		int ret;
    98	
  > 99		if (data->info->max_xy == SZ_16K - 1)
   100			expected_event = EXC3000_MT2_EVENT;
   101	
   102		ret = i2c_master_send(client, "'", 2);
   103		if (ret < 0)
   104			return ret;
   105	
   106		if (ret != 2)
   107			return -EIO;
   108	
   109		ret = i2c_master_recv(client, buf, EXC3000_LEN_FRAME);
   110		if (ret < 0)
   111			return ret;
   112	
   113		if (ret != EXC3000_LEN_FRAME)
   114			return -EIO;
   115	
   116		if (get_unaligned_le16(buf) != EXC3000_LEN_FRAME)
   117			return -EINVAL;
   118	
   119		if (buf[2] != expected_event)
   120			return -EINVAL;
   121	
   122		return 0;
   123	}
   124	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 30104 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version
  2020-05-19 18:24 ` [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version Sebastian Reichel
  2020-05-19 21:12   ` Enric Balletbo i Serra
@ 2020-05-20  4:38   ` kbuild test robot
  1 sibling, 0 replies; 12+ messages in thread
From: kbuild test robot @ 2020-05-20  4:38 UTC (permalink / raw)
  To: Sebastian Reichel, Dmitry Torokhov, Ahmet Inan, Martin Fuzzey
  Cc: kbuild-all, linux-input, linux-kernel, kernel, Sebastian Reichel

[-- Attachment #1: Type: text/plain, Size: 3628 bytes --]

Hi Sebastian,

I love your patch! Yet something to improve:

[auto build test ERROR on input/next]
[also build test ERROR on v5.7-rc6 next-20200519]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Sebastian-Reichel/EXC3000-Updates/20200520-023207
base:   https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git next
config: ia64-randconfig-r023-20200519 (attached as .config)
compiler: ia64-linux-gcc (GCC) 9.3.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp@intel.com>

All error/warnings (new ones prefixed by >>, old ones prefixed by <<):

In file included from include/linux/kobject.h:20,
from include/linux/device.h:17,
from drivers/input/touchscreen/exc3000.c:11:
>> drivers/input/touchscreen/exc3000.c:252:23: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types]
252 | static DEVICE_ATTR_RO(fw_version);
|                       ^~~~~~~~~~
include/linux/sysfs.h:117:10: note: in definition of macro '__ATTR_RO'
117 |  .show = _name##_show,               |          ^~~~~
>> drivers/input/touchscreen/exc3000.c:252:8: note: in expansion of macro 'DEVICE_ATTR_RO'
252 | static DEVICE_ATTR_RO(fw_version);
|        ^~~~~~~~~~~~~~
drivers/input/touchscreen/exc3000.c:252:23: note: (near initialization for 'dev_attr_fw_version.show')
252 | static DEVICE_ATTR_RO(fw_version);
|                       ^~~~~~~~~~
include/linux/sysfs.h:117:10: note: in definition of macro '__ATTR_RO'
117 |  .show = _name##_show,               |          ^~~~~
>> drivers/input/touchscreen/exc3000.c:252:8: note: in expansion of macro 'DEVICE_ATTR_RO'
252 | static DEVICE_ATTR_RO(fw_version);
|        ^~~~~~~~~~~~~~
cc1: some warnings being treated as errors

vim +252 drivers/input/touchscreen/exc3000.c

   222	
   223	static int fw_version_show(struct device *dev,
   224				   struct device_attribute *attr, char *buf)
   225	{
   226		struct exc3000_data *data = dev_get_drvdata(dev);
   227		static const u8 request[68] = {
   228			0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'D', 0x00
   229		};
   230		struct i2c_client *client = data->client;
   231		int err;
   232	
   233		mutex_lock(&data->query_lock);
   234	
   235		data->query_result = -ETIMEDOUT;
   236		reinit_completion(&data->wait_event);
   237	
   238		err = i2c_master_send(client, request, sizeof(request));
   239		if (err < 0) {
   240			mutex_unlock(&data->query_lock);
   241			return err;
   242		}
   243	
   244		wait_for_completion_interruptible_timeout(&data->wait_event, 1*HZ);
   245		mutex_unlock(&data->query_lock);
   246	
   247		if (data->query_result < 0)
   248			return data->query_result;
   249	
   250		return sprintf(buf, "%s\n", data->fw_version);
   251	}
 > 252	static DEVICE_ATTR_RO(fw_version);
   253	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 36838 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2020-05-20  4:39 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-19 18:24 [PATCHv2 0/5] EXC3000 Updates Sebastian Reichel
2020-05-19 18:24 ` [PATCHv2 1/5] dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Sebastian Reichel
2020-05-19 20:38   ` Enric Balletbo i Serra
2020-05-19 18:24 ` [PATCHv2 2/5] Input: EXC3000: switch to i2c's probe_new API Sebastian Reichel
2020-05-19 18:24 ` [PATCHv2 3/5] Input: EXC3000: add EXC80H60 and EXC80H84 support Sebastian Reichel
2020-05-19 23:52   ` kbuild test robot
2020-05-19 18:24 ` [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version Sebastian Reichel
2020-05-19 21:12   ` Enric Balletbo i Serra
2020-05-19 21:31     ` Sebastian Reichel
2020-05-20  4:38   ` kbuild test robot
2020-05-19 18:24 ` [PATCHv2 5/5] Input: EXC3000: Add reset gpio support Sebastian Reichel
2020-05-19 20:57   ` Enric Balletbo i Serra

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).