Linux Input Archive on lore.kernel.org
 help / color / Atom feed
From: robin <robin@protonic.nl>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: "linux-input @ vger . kernel . org" <linux-input@vger.kernel.org>,
	"linux-kernel @ vger . kernel . org"
	<linux-kernel@vger.kernel.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	RobinGong <yibin.gong@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>, Adam Ford <aford173@gmail.com>,
	"linux-arm-kernel @ lists . infradead . org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3] input: keyboard: snvs_pwrkey: Send key events for i.MX6 S, DL and Q
Date: Fri, 13 Sep 2019 09:39:26 +0200
Message-ID: <f12945994b66c5e605c0a121e7ad0526@protonic.nl> (raw)
In-Reply-To: <20190904065248.4i7q2vuxxt2xdnrr@pengutronix.de>

On 2019-09-04 08:52, Marco Felsch wrote:
> Hi Robin,
> 
> thanks for the patch it looks quite good, just two minor nitpicks.
> 
> On 19-09-04 06:23, Robin van der Gracht wrote:
>> The first generation i.MX6 processors does not send an interrupt when 
>> the
>> power key is pressed. It sends a power down request interrupt if the 
>> key is
>> released before a hard shutdown (5 second press). This should allow
>> software to bring down the SoC safely.
>> 
>> For this driver to work as a regular power key with the older SoCs, we 
>> need
>> to send a keypress AND release when we get the power down request irq.
>> 
>> Signed-off-by: Robin van der Gracht <robin@protonic.nl>
>> ---
>> 
>> Changes v2 -> v3:
>>  - Drop alt compatible string for identifying first revision snvs 
>> hardware,
>>    read minor revision from register instead.
>>  - Drop imx6qdl.dtsi modification and device-tree binding 
>> documentation.
>>  - Add an additional input_sync() to create 2 seperate input reports 
>> for press
>>    and release.
>> 
>>  drivers/input/keyboard/Kconfig       |  2 +-
>>  drivers/input/keyboard/snvs_pwrkey.c | 28 
>> ++++++++++++++++++++++++++--
>>  2 files changed, 27 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/input/keyboard/Kconfig 
>> b/drivers/input/keyboard/Kconfig
>> index 7c4f19dab34f..937e58da5ce1 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY
>>  	depends on OF
>>  	help
>>  	  This is the snvs powerkey driver for the Freescale i.MX 
>> application
>> -	  processors that are newer than i.MX6 SX.
>> +	  processors.
>> 
>>  	  To compile this driver as a module, choose M here; the
>>  	  module will be called snvs_pwrkey.
>> diff --git a/drivers/input/keyboard/snvs_pwrkey.c 
>> b/drivers/input/keyboard/snvs_pwrkey.c
>> index 5342d8d45f81..828580eee0d2 100644
>> --- a/drivers/input/keyboard/snvs_pwrkey.c
>> +++ b/drivers/input/keyboard/snvs_pwrkey.c
>> @@ -19,6 +19,7 @@
>>  #include <linux/mfd/syscon.h>
>>  #include <linux/regmap.h>
>> 
>> +#define SNVS_HPVIDR1_REG 0xF8
>>  #define SNVS_LPSR_REG	0x4C	/* LP Status Register */
>>  #define SNVS_LPCR_REG	0x38	/* LP Control Register */
>>  #define SNVS_HPSR_REG	0x14
>> @@ -37,6 +38,7 @@ struct pwrkey_drv_data {
>>  	int wakeup;
>>  	struct timer_list check_timer;
>>  	struct input_dev *input;
>> +	u8 minor_rev;
>>  };
>> 
>>  static void imx_imx_snvs_check_for_events(struct timer_list *t)
>> @@ -45,6 +47,20 @@ static void imx_imx_snvs_check_for_events(struct 
>> timer_list *t)
>>  	struct input_dev *input = pdata->input;
>>  	u32 state;
>> 
>> +	if (pdata->minor_rev == 0) {
> 
> Should we use a define here and ..
> 
>> +		/*
>> +		 * The first generation i.MX6 SoCs only sends an interrupt on
>> +		 * button release. To mimic power-key usage, we'll prepend a
>> +		 * press event.
>> +		 */
>> +		input_report_key(input, pdata->keycode, 1);
>> +		input_sync(input);
>> +		input_report_key(input, pdata->keycode, 0);
>> +		input_sync(input);
>> +		pm_relax(input->dev.parent);
>> +		return;
>> +	}
>> +
>>  	regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
>>  	state = state & SNVS_HPSR_BTN ? 1 : 0;
>> 
>> @@ -67,13 +83,17 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int 
>> irq, void *dev_id)
>>  {
>>  	struct platform_device *pdev = dev_id;
>>  	struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
>> +	unsigned long expire = jiffies;
>>  	u32 lp_status;
>> 
>>  	pm_wakeup_event(pdata->input->dev.parent, 0);
>> 
>>  	regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
>> -	if (lp_status & SNVS_LPSR_SPO)
>> -		mod_timer(&pdata->check_timer, jiffies + 
>> msecs_to_jiffies(DEBOUNCE_TIME));
>> +	if (lp_status & SNVS_LPSR_SPO) {
>> +		if (pdata->minor_rev > 0)
> 
> here? Just a nitpick, feel free to add/drop it.

Like a Macro?

#define FIRST_HW_REV(pdata)      (pdata->minor_rev == 0)

if (FIRST_HW_REV(pdata) {
         ...
}


or just a define to identify the minor rev used for the first hw 
revision


#define FIRST_HW_MINOR_REV       0

if (pdata->minor_rev == FIRST_HW_MINOR_REV) {
         ...
}

Regards,
Robin van der Gracht

  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-04  6:23 Robin van der Gracht
2019-09-04  6:52 ` Marco Felsch
2019-09-13  7:39   ` robin [this message]
2019-09-12 20:13 ` Dmitry Torokhov
2019-09-13  7:30   ` robin
2019-09-16  7:45     ` Robin Gong
2019-09-16 23:37       ` Dmitry Torokhov
2019-11-20  9:27         ` Marco Felsch
2019-11-20 16:32           ` robin
2019-11-21 13:17             ` Robin Gong
2019-11-22 22:48               ` Dmitry Torokhov

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f12945994b66c5e605c0a121e7ad0526@protonic.nl \
    --to=robin@protonic.nl \
    --cc=aford173@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=yibin.gong@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux Input Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-input/0 linux-input/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-input linux-input/ https://lore.kernel.org/linux-input \
		linux-input@vger.kernel.org
	public-inbox-index linux-input

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-input


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git