Linux-Integrity Archive on lore.kernel.org
 help / color / Atom feed
From: Nayna Jain <nayna@linux.ibm.com>
To: linuxppc-dev@ozlabs.org, linux-efi@vger.kernel.org,
	linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>,
	Paul Mackerras <paulus@samba.org>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Jeremy Kerr <jk@ozlabs.org>,
	Matthew Garret <matthew.garret@nebula.com>,
	Mimi Zohar <zohar@linux.ibm.com>,
	Claudio Carvalho <cclaudio@linux.ibm.com>,
	Nayna Jain <nayna@linux.ibm.com>
Subject: [PATCH v3 3/3] powerpc: Add support to initialize ima policy rules
Date: Mon, 10 Jun 2019 16:33:57 -0400
Message-ID: <1560198837-18857-4-git-send-email-nayna@linux.ibm.com> (raw)
In-Reply-To: <1560198837-18857-1-git-send-email-nayna@linux.ibm.com>

PowerNV secure boot relies on the kernel IMA security subsystem to
perform the OS kernel image signature verification. Since each secure
boot mode has different IMA policy requirements, dynamic definition of
the policy rules based on the runtime secure boot mode of the system is
required. On systems that support secure boot, but have it disabled,
only measurement policy rules of the kernel image and modules are
defined.

This patch defines the arch-specific implementation to retrieve the
secure boot mode of the system and accordingly configures the IMA policy
rules.

This patch provides arch-specific IMA policies if PPC_SECURE_BOOT
config is enabled.

Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
---
 arch/powerpc/Kconfig           | 14 +++++++++
 arch/powerpc/kernel/Makefile   |  1 +
 arch/powerpc/kernel/ima_arch.c | 54 ++++++++++++++++++++++++++++++++++
 include/linux/ima.h            |  3 +-
 4 files changed, 71 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/kernel/ima_arch.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8c1c636308c8..9de77bb14f54 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -902,6 +902,20 @@ config PPC_MEM_KEYS
 
 	  If unsure, say y.
 
+config PPC_SECURE_BOOT
+	prompt "Enable PowerPC Secure Boot"
+	bool
+	default n
+	depends on PPC64
+	depends on OPAL_SECVAR
+	depends on IMA
+	depends on IMA_ARCH_POLICY
+	help
+	  Linux on POWER with firmware secure boot enabled needs to define
+	  security policies to extend secure boot to the OS.This config
+	  allows user to enable OS Secure Boot on PowerPC systems that
+	  have firmware secure boot support.
+
 endmenu
 
 config ISA_DMA_API
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 0ea6c4aa3a20..75c929b41341 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -131,6 +131,7 @@ ifdef CONFIG_IMA
 obj-y				+= ima_kexec.o
 endif
 endif
+obj-$(CONFIG_PPC_SECURE_BOOT)	+= ima_arch.o
 
 obj-$(CONFIG_AUDIT)		+= audit.o
 obj64-$(CONFIG_AUDIT)		+= compat_audit.o
diff --git a/arch/powerpc/kernel/ima_arch.c b/arch/powerpc/kernel/ima_arch.c
new file mode 100644
index 000000000000..1767bf6e6550
--- /dev/null
+++ b/arch/powerpc/kernel/ima_arch.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 IBM Corporation
+ * Author: Nayna Jain <nayna@linux.ibm.com>
+ *
+ * ima_arch.c
+ *      - initialize ima policies for PowerPC Secure Boot
+ */
+
+#include <linux/ima.h>
+#include <asm/secboot.h>
+
+bool arch_ima_get_secureboot(void)
+{
+	bool sb_mode;
+
+	sb_mode = get_powerpc_sb_mode();
+	if (sb_mode)
+		return true;
+	else
+		return false;
+}
+
+/*
+ * File signature verification is not needed, include only measurements
+ */
+static const char *const default_arch_rules[] = {
+	"measure func=KEXEC_KERNEL_CHECK template=ima-modsig",
+	"measure func=MODULE_CHECK template=ima-modsig",
+	NULL
+};
+
+/* Both file signature verification and measurements are needed */
+static const char *const sb_arch_rules[] = {
+	"measure func=KEXEC_KERNEL_CHECK template=ima-modsig",
+	"measure func=MODULE_CHECK template=ima-modsig",
+	"appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig template=ima-modsig",
+#if !IS_ENABLED(CONFIG_MODULE_SIG)
+	"appraise func=MODULE_CHECK appraise_type=imasig|modsig template=ima-modsig",
+#endif
+	NULL
+};
+
+/*
+ * On PowerPC, file measurements are to be added to the IMA measurement list
+ * irrespective of the secure boot state of the system. Signature verification
+ * is conditionally enabled based on the secure boot state.
+ */
+const char *const *arch_get_ima_policy(void)
+{
+	if (IS_ENABLED(CONFIG_IMA_ARCH_POLICY) && arch_ima_get_secureboot())
+		return sb_arch_rules;
+	return default_arch_rules;
+}
diff --git a/include/linux/ima.h b/include/linux/ima.h
index fd9f7cf4cdf5..a01df076ecae 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -31,7 +31,8 @@ extern void ima_post_path_mknod(struct dentry *dentry);
 extern void ima_add_kexec_buffer(struct kimage *image);
 #endif
 
-#if (defined(CONFIG_X86) && defined(CONFIG_EFI)) || defined(CONFIG_S390)
+#if (defined(CONFIG_X86) && defined(CONFIG_EFI)) || defined(CONFIG_S390) \
+	|| defined(CONFIG_PPC_SECURE_BOOT)
 extern bool arch_ima_get_secureboot(void);
 extern const char * const *arch_get_ima_policy(void);
 #else
-- 
2.20.1


  parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-10 20:33 [PATCH v3 0/3] powerpc: Enabling IMA arch specific secure boot policies Nayna Jain
2019-06-10 20:33 ` [PATCH v3 1/3] powerpc/powernv: Add OPAL API interface to get secureboot state Nayna Jain
2019-06-12  6:17   ` Daniel Axtens
     [not found]     ` <eaa37bd0-a77d-d70a-feb5-c0e73ce231bf@linux.vnet.ibm.com>
2019-06-12 23:04       ` Daniel Axtens
2019-06-14 22:22         ` Nayna
2019-06-16 23:56           ` Daniel Axtens
2019-06-10 20:33 ` [PATCH v3 2/3] powerpc/powernv: detect the secure boot mode of the system Nayna Jain
2019-06-10 20:33 ` Nayna Jain [this message]
2019-06-11  5:19   ` [PATCH v3 3/3] powerpc: Add support to initialize ima policy rules Satheesh Rajendran
2019-06-11 17:07     ` Nayna

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560198837-18857-4-git-send-email-nayna@linux.ibm.com \
    --to=nayna@linux.ibm.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=benh@kernel.crashing.org \
    --cc=cclaudio@linux.ibm.com \
    --cc=jk@ozlabs.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=matthew.garret@nebula.com \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Integrity Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-integrity/0 linux-integrity/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-integrity linux-integrity/ https://lore.kernel.org/linux-integrity \
		linux-integrity@vger.kernel.org linux-integrity@archiver.kernel.org
	public-inbox-index linux-integrity


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-integrity


AGPL code for this site: git clone https://public-inbox.org/ public-inbox