From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: linux-integrity@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
linux-security-module@vger.kernel.org,
Peter Huewe <PeterHuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
Tomas Winkler <tomas.winkler@intel.com>,
Tadeusz Struk <tadeusz.struk@intel.com>,
Stefan Berger <stefanb@linux.vnet.ibm.com>,
Nayna Jain <nayna@linux.ibm.com>,
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Subject: [PATCH v11 00/16] Remove nested TPM operations
Date: Wed, 6 Feb 2019 00:47:07 +0200 [thread overview]
Message-ID: <20190205224723.19671-1-jarkko.sakkinen@linux.intel.com> (raw)
Make the changes necessary to detach TPM space code and TPM activation
code out of the tpm_transmit() flow because of both of these can cause
nested tpm_transmit() calls. The nesteds calls make the whole flow hard
to maintain, and thus, it is better to just fix things now before this
turns into a bigger mess.
v11:
* Drop the patch that tries to flush TPM space on system. Not a proper
fallback + out of scope for this patch set.
v10:
* Use void pointers to avoid unnecessary casts in functions paramaters
where it makes sense.
v9:
* Fixed again tpm_try_get_ops().
* Added missing reviewed-by's.
v8:
* Re-add the check for ret < 0 after calling tpm_try_transmit() that
was dropped by mistake while moving code.
* Fix error fallback for tpm_try_get_ops() when tpm_chip_start()
fails.
v7:
* Reorganize series so that more trivial and self-contained changes are
in the head.
v6:
* When tpm_validate_commmand() was moved to tpm2-space.c, the struct for
the TPM header was incorrectly declared as struct tpm_input_header.
* Fix return value in tpm_validate_command().
v5:
* Add the missing rev's from Stefan Berger.
v4:
* Return 0 from pcrs_show() when tpm1_pcr_read() fails.
* Fix error handling flow in tpm_try_transmit().
* Replace struct tpm_input_header and struct tpm_output_header with
struct tpm_header.
v3:
* Encapsulate power gating code to tpm_chip_start() and tpm_chip_stop().
* Move TPM power gating code and locking to tpm_try_get_ops() and
tpm_put_ops().
* Call power gating code directly in tpm_chip_register() and
tpm2_del_space().
v2:
* Print tpm2_commit_space() error inside tpm2_commit_space()
* Error code was not printed when recv() callback failed. It is
fixed in this version.
* Added a patch that removes @space from tpm_transmit().
* Fixed a regression in earlier series. Forgot to amend the change
from the staging area that renames NESTED to UNLOCKED in tpm2-space.c.
Jarkko Sakkinen (16):
tpm: use tpm_buf in tpm_transmit_cmd() as the IO parameter
tpm: fix invalid return value in pubek_show()
tpm: return 0 from pcrs_show() when tpm1_pcr_read() fails
tpm: print tpm2_commit_space() error inside tpm2_commit_space()
tpm: declare struct tpm_header
tpm: access command header through struct in tpm_try_transmit()
tpm: encapsulate tpm_dev_transmit()
tpm: clean up tpm_try_transmit() error handling flow
tpm: move tpm_validate_commmand() to tpm2-space.c
tpm: move TPM space code out of tpm_transmit()
tpm: remove @space from tpm_transmit()
tpm: use tpm_try_get_ops() in tpm-sysfs.c.
tpm: remove TPM_TRANSMIT_UNLOCKED flag
tpm: introduce tpm_chip_start() and tpm_chip_stop()
tpm: take TPM chip power gating out of tpm_transmit()
tpm: remove @flags from tpm_transmit()
drivers/char/tpm/tpm-chip.c | 109 ++++++++++++
drivers/char/tpm/tpm-dev-common.c | 44 ++++-
drivers/char/tpm/tpm-interface.c | 264 ++++++------------------------
drivers/char/tpm/tpm-sysfs.c | 138 ++++++++++------
drivers/char/tpm/tpm.h | 64 +++-----
drivers/char/tpm/tpm1-cmd.c | 28 +---
drivers/char/tpm/tpm2-cmd.c | 72 +++-----
drivers/char/tpm/tpm2-space.c | 91 +++++++---
drivers/char/tpm/tpm_i2c_atmel.c | 5 +-
drivers/char/tpm/tpm_vtpm_proxy.c | 12 +-
drivers/char/tpm/xen-tpmfront.c | 2 +-
11 files changed, 408 insertions(+), 421 deletions(-)
--
2.19.1
next reply other threads:[~2019-02-05 22:47 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-05 22:47 Jarkko Sakkinen [this message]
2019-02-05 22:47 ` [PATCH v11 01/16] tpm: use tpm_buf in tpm_transmit_cmd() as the IO parameter Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 02/16] tpm: fix invalid return value in pubek_show() Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 03/16] tpm: return 0 from pcrs_show() when tpm1_pcr_read() fails Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 04/16] tpm: print tpm2_commit_space() error inside tpm2_commit_space() Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 05/16] tpm: declare struct tpm_header Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 06/16] tpm: access command header through struct in tpm_try_transmit() Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 07/16] tpm: encapsulate tpm_dev_transmit() Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 08/16] tpm: clean up tpm_try_transmit() error handling flow Jarkko Sakkinen
2019-02-07 23:36 ` Stefan Berger
2019-02-05 22:47 ` [PATCH v11 09/16] tpm: move tpm_validate_commmand() to tpm2-space.c Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 10/16] tpm: move TPM space code out of tpm_transmit() Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 11/16] tpm: remove @space from tpm_transmit() Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 12/16] tpm: use tpm_try_get_ops() in tpm-sysfs.c Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 13/16] tpm: remove TPM_TRANSMIT_UNLOCKED flag Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 14/16] tpm: introduce tpm_chip_start() and tpm_chip_stop() Jarkko Sakkinen
2019-02-05 22:47 ` [PATCH v11 15/16] tpm: take TPM chip power gating out of tpm_transmit() Jarkko Sakkinen
2019-02-07 23:32 ` Stefan Berger
2019-02-08 0:02 ` Jerry Snitselaar
2019-02-05 22:47 ` [PATCH v11 16/16] tpm: remove @flags from tpm_transmit() Jarkko Sakkinen
2019-02-06 12:06 ` [PATCH v11 00/16] Remove nested TPM operations Jarkko Sakkinen
2019-02-07 18:41 ` Alexander Steffen
2019-02-07 21:14 ` Stefan Berger
2019-02-07 21:29 ` Jarkko Sakkinen
2019-02-07 23:29 ` Stefan Berger
2019-02-08 0:33 ` Jarkko Sakkinen
2019-02-08 1:51 ` Stefan Berger
2019-02-08 2:14 ` Stefan Berger
2019-02-08 11:50 ` Jarkko Sakkinen
2019-02-08 12:22 ` Stefan Berger
2019-02-08 13:12 ` Jarkko Sakkinen
2019-02-08 13:28 ` Alexander Steffen
2019-02-08 14:09 ` Jarkko Sakkinen
2019-02-08 18:02 ` Alexander Steffen
2019-02-08 11:14 ` Jarkko Sakkinen
2019-02-08 12:05 ` Stefan Berger
2019-02-08 13:02 ` Jarkko Sakkinen
2019-02-08 13:10 ` Stefan Berger
2019-02-08 13:17 ` Jarkko Sakkinen
2019-02-08 13:33 ` Jarkko Sakkinen
2019-02-08 14:02 ` Stefan Berger
2019-02-08 14:08 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190205224723.19671-1-jarkko.sakkinen@linux.intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=PeterHuewe@gmx.de \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=nayna@linux.ibm.com \
--cc=stefanb@linux.vnet.ibm.com \
--cc=tadeusz.struk@intel.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).