Linux-Integrity Archive on lore.kernel.org
 help / color / Atom feed
From: Stefan Berger <stefanb@linux.vnet.ibm.com>
To: linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org,
	jarkko.sakkinen@linux.intel.com, linux-acpi@vger.kernel.org,
	linux-security-module@vger.kernel.org
Cc: Stefan Berger <stefanb@linux.ibm.com>,
	"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Subject: [PATCH v5 1/2] acpi: Extend TPM2 ACPI table with missing log fields
Date: Tue, 23 Jun 2020 08:06:35 -0400
Message-ID: <20200623120636.1453470-2-stefanb@linux.vnet.ibm.com> (raw)
In-Reply-To: <20200623120636.1453470-1-stefanb@linux.vnet.ibm.com>

From: Stefan Berger <stefanb@linux.ibm.com>

Recent extensions of the TPM2 ACPI table added 3 more fields
including 12 bytes of start method specific parameters and Log Area
Minimum Length (u32) and Log Area Start Address (u64). So, we extend
the existing structure with these fields to allow non-UEFI systems
to access the TPM2's log.

The specification that has the new fields is the following:
  TCG ACPI Specification
  Family "1.2" and "2.0"
  Version 1.2, Revision 8

Adapt all existing table size calculations to use
offsetof(struct acpi_table_tpm2, start_method_specific)
[where start_method_specific is a newly added field]
rather than sizeof(struct acpi_table_tpm2) so that the addition
of the new fields does not affect current systems that may not
have them.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---
 drivers/char/tpm/tpm_crb.c | 13 ++++++++++---
 drivers/char/tpm/tpm_tis.c |  4 +++-
 include/acpi/actbl3.h      |  5 +++--
 3 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index a9dcf31eadd2..0565aa5482f9 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -669,7 +669,9 @@ static int crb_acpi_add(struct acpi_device *device)
 
 	status = acpi_get_table(ACPI_SIG_TPM2, 1,
 				(struct acpi_table_header **) &buf);
-	if (ACPI_FAILURE(status) || buf->header.length < sizeof(*buf)) {
+	if (ACPI_FAILURE(status) || buf->header.length <
+			offsetof(struct acpi_table_tpm2,
+				 start_method_specific)) {
 		dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
 		return -EINVAL;
 	}
@@ -684,14 +686,19 @@ static int crb_acpi_add(struct acpi_device *device)
 		return -ENOMEM;
 
 	if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) {
-		if (buf->header.length < (sizeof(*buf) + sizeof(*crb_smc))) {
+		if (buf->header.length <
+			(offsetof(struct acpi_table_tpm2,
+				  start_method_specific) +
+			 sizeof(*crb_smc))) {
 			dev_err(dev,
 				FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n",
 				buf->header.length,
 				ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC);
 			return -EINVAL;
 		}
-		crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf, sizeof(*buf));
+		crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf,
+			   offsetof(struct acpi_table_tpm2,
+				    start_method_specific));
 		priv->smc_func_id = crb_smc->smc_func_id;
 	}
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index e7df342a317d..a80f36860bac 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -111,7 +111,9 @@ static int check_acpi_tpm2(struct device *dev)
 	 */
 	st =
 	    acpi_get_table(ACPI_SIG_TPM2, 1, (struct acpi_table_header **)&tbl);
-	if (ACPI_FAILURE(st) || tbl->header.length < sizeof(*tbl)) {
+	if (ACPI_FAILURE(st) || tbl->header.length <
+			offsetof(struct acpi_table_tpm2,
+				 start_method_specific)) {
 		dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
 		return -EINVAL;
 	}
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index b0b163b9efc6..8b55426bbcf6 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -411,8 +411,9 @@ struct acpi_table_tpm2 {
 	u16 reserved;
 	u64 control_address;
 	u32 start_method;
-
-	/* Platform-specific data follows */
+	u8  start_method_specific[12];
+	u32 log_area_minimum_length;		/* optional */
+	u64 log_area_start_address;		/* optional */
 };
 
 /* Values for start_method above */
-- 
2.26.2


  reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 12:06 [PATCH v5 0/2] tpm2: Make TPM2 logs accessible for non-UEFI firmware Stefan Berger
2020-06-23 12:06 ` Stefan Berger [this message]
2020-06-25  0:00   ` [PATCH v5 1/2] acpi: Extend TPM2 ACPI table with missing log fields Jarkko Sakkinen
2020-06-25  0:38     ` Stefan Berger
2020-06-25  2:34       ` Jarkko Sakkinen
2020-06-25  2:52         ` Jarkko Sakkinen
2020-06-25  2:54           ` Jarkko Sakkinen
2020-06-25 12:10         ` Stefan Berger
2020-06-23 12:06 ` [PATCH v5 2/2] tpm: Add support for event log pointer found in TPM2 ACPI table Stefan Berger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200623120636.1453470-2-stefanb@linux.vnet.ibm.com \
    --to=stefanb@linux.vnet.ibm.com \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=stefanb@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Integrity Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-integrity/0 linux-integrity/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-integrity linux-integrity/ https://lore.kernel.org/linux-integrity \
		linux-integrity@vger.kernel.org
	public-inbox-index linux-integrity

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-integrity


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git