linux-integrity.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lino Sanfilippo <LinoSanfilippo@gmx.de>
To: peterhuewe@gmx.de, jarkko@kernel.org, jgg@ziepe.ca
Cc: stefanb@linux.vnet.ibm.com, linux@mniewoehner.de,
	linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org,
	jandryuk@gmail.com, pmenzel@molgen.mpg.de,
	l.sanfilippo@kunbus.com, LinoSanfilippo@gmx.de, lukas@wunner.de,
	p.rosenberger@kunbus.com
Subject: [PATCH v11 04/14] tpm, tpm_tis: Do not skip reset of original interrupt vector
Date: Thu, 24 Nov 2022 14:55:28 +0100	[thread overview]
Message-ID: <20221124135538.31020-5-LinoSanfilippo@gmx.de> (raw)
In-Reply-To: <20221124135538.31020-1-LinoSanfilippo@gmx.de>

From: Lino Sanfilippo <l.sanfilippo@kunbus.com>

If in tpm_tis_probe_irq_single() an error occurs after the original
interrupt vector has been read, restore the interrupts before the error is
returned.

Since the caller does not check the error value, return -1 in any case that
the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function
tpm_tis_gen_interrupt() is not longer used, make it a void function.

Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
---
 drivers/char/tpm/tpm_tis_core.c | 29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 603b82ca56da..81b9726d3ed2 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -729,7 +729,7 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int tpm_tis_gen_interrupt(struct tpm_chip *chip)
+static void tpm_tis_gen_interrupt(struct tpm_chip *chip)
 {
 	const char *desc = "attempting to generate an interrupt";
 	u32 cap2;
@@ -738,7 +738,7 @@ static int tpm_tis_gen_interrupt(struct tpm_chip *chip)
 
 	ret = request_locality(chip, 0);
 	if (ret < 0)
-		return ret;
+		return;
 
 	if (chip->flags & TPM_CHIP_FLAG_TPM2)
 		ret = tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
@@ -746,8 +746,6 @@ static int tpm_tis_gen_interrupt(struct tpm_chip *chip)
 		ret = tpm1_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, 0);
 
 	release_locality(chip, 0);
-
-	return ret;
 }
 
 /* Register the IRQ and issue a command that will cause an interrupt. If an
@@ -777,42 +775,37 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask,
 
 	rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq);
 	if (rc < 0)
-		return rc;
+		goto restore_irqs;
 
 	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status);
 	if (rc < 0)
-		return rc;
+		goto restore_irqs;
 
 	/* Clear all existing */
 	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status);
 	if (rc < 0)
-		return rc;
-
+		goto restore_irqs;
 	/* Turn on */
 	rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality),
 			     intmask | TPM_GLOBAL_INT_ENABLE);
 	if (rc < 0)
-		return rc;
+		goto restore_irqs;
 
 	clear_bit(TPM_TIS_IRQ_TESTED, &priv->flags);
 
 	/* Generate an interrupt by having the core call through to
 	 * tpm_tis_send
 	 */
-	rc = tpm_tis_gen_interrupt(chip);
-	if (rc < 0)
-		return rc;
+	tpm_tis_gen_interrupt(chip);
 
+restore_irqs:
 	/* tpm_tis_send will either confirm the interrupt is working or it
 	 * will call disable_irq which undoes all of the above.
 	 */
 	if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
-		rc = tpm_tis_write8(priv, original_int_vec,
-				TPM_INT_VECTOR(priv->locality));
-		if (rc < 0)
-			return rc;
-
-		return 1;
+		tpm_tis_write8(priv, original_int_vec,
+			       TPM_INT_VECTOR(priv->locality));
+		return -1;
 	}
 
 	return 0;
-- 
2.36.1


  parent reply	other threads:[~2022-11-24 13:57 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-24 13:55 [PATCH v11 00/14] TPM IRQ fixes Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 01/14] tpm, tpm_tis: Avoid cache incoherency in test for interrupts Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 02/14] tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 03/14] tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed Lino Sanfilippo
2022-11-24 13:55 ` Lino Sanfilippo [this message]
2022-11-28  1:26   ` [PATCH v11 04/14] tpm, tpm_tis: Do not skip reset of original interrupt vector Jarkko Sakkinen
2022-11-24 13:55 ` [PATCH v11 05/14] tpm, tpm_tis: Claim locality before writing interrupt registers Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 06/14] tpm, tpm_tis: Only handle supported interrupts Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 07/14] tpm, tpm_tis: Move interrupt mask checks into own function Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 08/14] tpm, tpm_tis: do not check for the active locality in interrupt handler Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 09/14] tpm, tpm: Implement usage counter for locality Lino Sanfilippo
2022-11-28  1:28   ` Jarkko Sakkinen
2022-11-24 13:55 ` [PATCH v11 10/14] tpm, tpm_tis: Request threaded interrupt handler Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 11/14] tpm, tpm_tis: Claim locality in " Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 12/14] tpm, tpm_tis: Claim locality when interrupts are reenabled on resume Lino Sanfilippo
2022-11-24 13:55 ` [PATCH v11 13/14] tpm, tpm_tis: startup chip before testing for interrupts Lino Sanfilippo
2022-11-28 12:53   ` Lino Sanfilippo
2022-12-04 17:02     ` Jarkko Sakkinen
2022-12-04 17:01   ` Jarkko Sakkinen
2022-11-24 13:55 ` [PATCH v11 14/14] tpm, tpm_tis: Enable interrupt test Lino Sanfilippo
2023-02-24 14:48 ` [PATCH v11 00/14] TPM IRQ fixes Lino Sanfilippo
2023-03-16 17:18   ` Michael Niewöhner
2023-03-19 13:53     ` Jarkko Sakkinen
2023-04-21 16:50       ` Jarkko Sakkinen
2023-04-21 19:34         ` Jarkko Sakkinen
2023-04-21 19:35           ` Jarkko Sakkinen
2023-04-22  0:59         ` Lino Sanfilippo
2023-04-23 14:15           ` Jarkko Sakkinen
2023-04-23 15:36             ` Michael Niewöhner
2023-04-23 15:40               ` Jarkko Sakkinen
2023-04-23 16:51                 ` Michael Niewöhner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221124135538.31020-5-LinoSanfilippo@gmx.de \
    --to=linosanfilippo@gmx.de \
    --cc=jandryuk@gmail.com \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=l.sanfilippo@kunbus.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@mniewoehner.de \
    --cc=lukas@wunner.de \
    --cc=p.rosenberger@kunbus.com \
    --cc=peterhuewe@gmx.de \
    --cc=pmenzel@molgen.mpg.de \
    --cc=stefanb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).