linux-integrity.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roberto Sassu <roberto.sassu@huawei.com>
To: Mimi Zohar <zohar@linux.ibm.com>,
	"linux-integrity@vger.kernel.org"
	<linux-integrity@vger.kernel.org>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>,
	James Bottomley <James.Bottomley@HansenPartnership.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Silviu Vlasceanu <Silviu.Vlasceanu@huawei.com>
Subject: RE: [PATCH 2/2] ima: support calculating the boot_aggregate based on different TPM banks
Date: Tue, 28 Jan 2020 16:31:08 +0000	[thread overview]
Message-ID: <7dac65691a5848c69009aff7db7fdb2d@huawei.com> (raw)
In-Reply-To: <1580226042.5088.90.camel@linux.ibm.com>

> -----Original Message-----
> From: Mimi Zohar [mailto:zohar@linux.ibm.com]
> Sent: Tuesday, January 28, 2020 4:41 PM
> To: Roberto Sassu <roberto.sassu@huawei.com>; linux-
> integrity@vger.kernel.org
> Cc: Jerry Snitselaar <jsnitsel@redhat.com>; James Bottomley
> <James.Bottomley@HansenPartnership.com>; linux-
> kernel@vger.kernel.org; Silviu Vlasceanu <Silviu.Vlasceanu@huawei.com>
> Subject: Re: [PATCH 2/2] ima: support calculating the boot_aggregate based
> on different TPM banks
> 
> On Tue, 2020-01-28 at 14:19 +0000, Roberto Sassu wrote:
> > > -----Original Message-----
> > > From: linux-integrity-owner@vger.kernel.org [mailto:linux-integrity-
> > > owner@vger.kernel.org] On Behalf Of Mimi Zohar
> > > Sent: Monday, January 27, 2020 5:02 PM
> > > To: linux-integrity@vger.kernel.org
> > > Cc: Jerry Snitselaar <jsnitsel@redhat.com>; James Bottomley
> > > <James.Bottomley@HansenPartnership.com>; linux-
> > > kernel@vger.kernel.org; Mimi Zohar <zohar@linux.ibm.com>
> > > Subject: [PATCH 2/2] ima: support calculating the boot_aggregate based
> on
> > > different TPM banks
> > >
> > > Calculating the boot_aggregate attempts to read the TPM SHA1 bank,
> > > assuming it is always enabled.  With TPM 2.0 hash agility, TPM chips
> > > could support multiple TPM PCR banks, allowing firmware to configure
> and
> > > enable different banks.
> > >
> > > Instead of hard coding the TPM 2.0 bank hash algorithm used for
> calculating
> > > the boot-aggregate, see if the configured IMA_DEFAULT_HASH
> algorithm is
> > > an allocated TPM bank, otherwise use the first allocated TPM bank.
> > >
> > > For TPM 1.2 SHA1 is the only supported hash algorithm.
> > >
> > > Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
> > > Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
> > > ---
> > >  security/integrity/ima/ima_crypto.c | 37
> > > ++++++++++++++++++++++++++++++++++++-
> > >  1 file changed, 36 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/security/integrity/ima/ima_crypto.c
> > > b/security/integrity/ima/ima_crypto.c
> > > index 7967a6904851..b1b26d61f174 100644
> > > --- a/security/integrity/ima/ima_crypto.c
> > > +++ b/security/integrity/ima/ima_crypto.c
> > > @@ -656,8 +656,25 @@ static void __init ima_pcrread(u32 idx, struct
> > > tpm_digest *d)
> > >  		pr_err("Error Communicating to TPM chip\n");
> > >  }
> > >
> > > +/* tpm2_hash_map is the same as defined in tpm2-cmd.c and
> > > trusted_tpm2.c */
> > > +static struct tpm2_hash tpm2_hash_map[] = {
> > > +	{HASH_ALGO_SHA1, TPM_ALG_SHA1},
> > > +	{HASH_ALGO_SHA256, TPM_ALG_SHA256},
> > > +	{HASH_ALGO_SHA384, TPM_ALG_SHA384},
> > > +	{HASH_ALGO_SHA512, TPM_ALG_SHA512},
> > > +	{HASH_ALGO_SM3_256, TPM_ALG_SM3_256},
> > > +};
> > > +
> > >  /*
> > > - * Calculate the boot aggregate hash
> > > + * The boot_aggregate is a cumulative hash over TPM registers 0 - 7.
> With
> > > + * TPM 2.0 hash agility, TPM chips could support multiple TPM PCR
> banks,
> > > + * allowing firmware to configure and enable different banks.
> > > + *
> > > + * Instead of hard coding the TPM bank hash algorithm used for
> calculating
> > > + * the boot-aggregate, see if the configured IMA_DEFAULT_HASH
> > > algorithm is
> > > + * an allocated TPM bank, otherwise use the first allocated TPM bank.
> > > + *
> > > + * For TPM 1.2 SHA1 is the only hash algorithm.
> > >   */
> > >  static int __init ima_calc_boot_aggregate_tfm(char *digest,
> > >  					      struct crypto_shash *tfm)
> > > @@ -673,6 +690,24 @@ static int __init
> ima_calc_boot_aggregate_tfm(char
> > > *digest,
> > >  	if (rc != 0)
> > >  		return rc;
> > >
> > > +	for (i = 0; i < ARRAY_SIZE(tpm2_hash_map); i++) {
> > > +		if (tpm2_hash_map[i].crypto_id == ima_hash_algo) {
> >
> > It is not necessary to define a new map. ima_tpm_chip->allocated_banks
> > has a crypto_id field.
> 
> Ok, thanks.

When you send the new version, please include patch 1/8 of my patch set,
that sets crypto_id to HASH_ALGO__LAST if there is no mapping between
TPM ID and crypto ID.

Thanks

Roberto

HUAWEI TECHNOLOGIES Duesseldorf GmbH, HRB 56063
Managing Director: Li Peng, Li Jian, Shi Yanli

  reply	other threads:[~2020-01-28 16:31 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-27 16:01 [PATCH 1/2] ima: use the IMA configured hash algo to calculate the boot aggregate Mimi Zohar
2020-01-27 16:01 ` [PATCH 2/2] ima: support calculating the boot_aggregate based on different TPM banks Mimi Zohar
2020-01-27 16:50   ` Lakshmi Ramasubramanian
2020-01-27 18:01     ` Mimi Zohar
2020-01-27 20:55     ` Ken Goldman
2020-01-28 14:19   ` Roberto Sassu
2020-01-28 15:40     ` Mimi Zohar
2020-01-28 16:31       ` Roberto Sassu [this message]
2020-01-29 23:20       ` Mimi Zohar
2020-01-30  7:31         ` James Bottomley
2020-01-27 17:38 ` [PATCH 1/2] ima: use the IMA configured hash algo to calculate the boot aggregate Roberto Sassu
2020-01-27 18:16   ` Mimi Zohar
2020-01-27 18:35     ` Mimi Zohar
2020-01-27 20:49 ` Jerry Snitselaar
2020-01-27 21:31   ` Mimi Zohar
2020-01-29  8:30     ` Petr Vorel
2020-01-29 22:51       ` Mimi Zohar
2020-01-30  8:41         ` Petr Vorel
2020-01-30 15:27         ` Roberto Sassu
2020-01-30 15:40           ` Roberto Sassu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7dac65691a5848c69009aff7db7fdb2d@huawei.com \
    --to=roberto.sassu@huawei.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=Silviu.Vlasceanu@huawei.com \
    --cc=jsnitsel@redhat.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=zohar@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).