Linux-Integrity Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3] ima: add a new CONFIG for loading arch-specific policies
@ 2020-03-09  0:57 Nayna Jain
  2020-03-11 18:35 ` Philipp Rudo
  2020-03-12 11:15 ` Michael Ellerman
  0 siblings, 2 replies; 5+ messages in thread
From: Nayna Jain @ 2020-03-09  0:57 UTC (permalink / raw)
  To: linux-integrity, linuxppc-dev, linux-efi, linux-s390, x86
  Cc: Ard Biesheuvel, Philipp Rudo, Michael Ellerman, zohar,
	Thomas Gleixner, linux-kernel, Nayna Jain, Nayna Jain

From: Nayna Jain <nayna@linux.vnet.ibm.com>

Every time a new architecture defines the IMA architecture specific
functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
include file needs to be updated. To avoid this "noise", this patch
defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
the different architectures to select it.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Philipp Rudo <prudo@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
---
v3:
* Removes CONFIG_IMA dependency. Thanks Ard.
* Updated the patch with improvements suggested by Michael. It now uses
"imply" instead of "select". Thanks Michael.
* Replaced the CONFIG_IMA in x86 and s390 with new config, else it was
resulting in redefinition when the IMA_SECURE_AND_OR_TRUSTED_BOOT
is not enabled. Thanks to Mimi for identifying the problem.
* Removed "#ifdef EFI" check in the arch/x86/Makefile for compiling
ima_arch.c file.
* Ard, Thanks for your Acked-by. I have changed the arch/x86/Makefile in
this version. Can you please review again and confirm ?
* Rudo, Thanks for your review. I have changed arch/s390/Makefile as well.
Can you also please review again ?

v2:
* Fixed the issue identified by Mimi. Thanks Mimi, Ard, Heiko and Michael for
discussing the fix.

 arch/powerpc/Kconfig           | 1 +
 arch/s390/Kconfig              | 1 +
 arch/s390/kernel/Makefile      | 2 +-
 arch/x86/Kconfig               | 1 +
 arch/x86/kernel/Makefile       | 4 +---
 include/linux/ima.h            | 3 +--
 security/integrity/ima/Kconfig | 7 +++++++
 7 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 497b7d0b2d7e..5b9f1cba2a44 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -979,6 +979,7 @@ config PPC_SECURE_BOOT
 	bool
 	depends on PPC_POWERNV
 	depends on IMA_ARCH_POLICY
+	imply IMA_SECURE_AND_OR_TRUSTED_BOOT
 	help
 	  Systems with firmware secure boot enabled need to define security
 	  policies to extend secure boot to the OS. This config allows a user
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 8abe77536d9d..59c216af6264 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -195,6 +195,7 @@ config S390
 	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
 	select SWIOTLB
 	select GENERIC_ALLOCATOR
+	imply IMA_SECURE_AND_OR_TRUSTED_BOOT
 
 
 config SCHED_OMIT_FRAME_POINTER
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 2b1203cf7be6..578a6fa82ea4 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -70,7 +70,7 @@ obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 obj-$(CONFIG_KEXEC_FILE)	+= machine_kexec_file.o kexec_image.o
 obj-$(CONFIG_KEXEC_FILE)	+= kexec_elf.o
 
-obj-$(CONFIG_IMA)		+= ima_arch.o
+obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT)	+= ima_arch.o
 
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_cpum_cf_common.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_cpum_cf.o perf_cpum_sf.o
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index beea77046f9b..dcf5b1729f7c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -230,6 +230,7 @@ config X86
 	select VIRT_TO_BUS
 	select X86_FEATURE_NAMES		if PROC_FS
 	select PROC_PID_ARCH_STATUS		if PROC_FS
+	imply IMA_SECURE_AND_OR_TRUSTED_BOOT    if EFI
 
 config INSTRUCTION_DECODER
 	def_bool y
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9b294c13809a..cfef37a27def 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -154,6 +154,4 @@ ifeq ($(CONFIG_X86_64),y)
 	obj-y				+= vsmp_64.o
 endif
 
-ifdef CONFIG_EFI
-obj-$(CONFIG_IMA)			+= ima_arch.o
-endif
+obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT)	+= ima_arch.o
diff --git a/include/linux/ima.h b/include/linux/ima.h
index 1659217e9b60..aefe758f4466 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -30,8 +30,7 @@ extern void ima_kexec_cmdline(const void *buf, int size);
 extern void ima_add_kexec_buffer(struct kimage *image);
 #endif
 
-#if (defined(CONFIG_X86) && defined(CONFIG_EFI)) || defined(CONFIG_S390) \
-	|| defined(CONFIG_PPC_SECURE_BOOT)
+#ifdef CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
 extern bool arch_ima_get_secureboot(void);
 extern const char * const *arch_get_ima_policy(void);
 #else
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index 3f3ee4e2eb0d..edde88dbe576 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -327,3 +327,10 @@ config IMA_QUEUE_EARLY_BOOT_KEYS
 	depends on IMA_MEASURE_ASYMMETRIC_KEYS
 	depends on SYSTEM_TRUSTED_KEYRING
 	default y
+
+config IMA_SECURE_AND_OR_TRUSTED_BOOT
+       bool
+       depends on IMA_ARCH_POLICY
+       help
+          This option is selected by architectures to enable secure and/or
+          trusted boot based on IMA runtime policies.
-- 
2.17.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3] ima: add a new CONFIG for loading arch-specific policies
  2020-03-09  0:57 [PATCH v3] ima: add a new CONFIG for loading arch-specific policies Nayna Jain
@ 2020-03-11 18:35 ` Philipp Rudo
  2020-03-12 11:15 ` Michael Ellerman
  1 sibling, 0 replies; 5+ messages in thread
From: Philipp Rudo @ 2020-03-11 18:35 UTC (permalink / raw)
  To: Nayna Jain
  Cc: linux-integrity, linuxppc-dev, linux-efi, linux-s390, x86,
	Ard Biesheuvel, Michael Ellerman, zohar, Thomas Gleixner,
	linux-kernel, Nayna Jain

On Sun,  8 Mar 2020 20:57:51 -0400
Nayna Jain <nayna@linux.ibm.com> wrote:

> From: Nayna Jain <nayna@linux.vnet.ibm.com>
> 
> Every time a new architecture defines the IMA architecture specific
> functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
> include file needs to be updated. To avoid this "noise", this patch
> defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
> the different architectures to select it.
> 
> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
> Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
> Acked-by: Ard Biesheuvel <ardb@kernel.org>
> Cc: Ard Biesheuvel <ardb@kernel.org>
> Cc: Philipp Rudo <prudo@linux.ibm.com>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> ---
> v3:
> * Removes CONFIG_IMA dependency. Thanks Ard.
> * Updated the patch with improvements suggested by Michael. It now uses
> "imply" instead of "select". Thanks Michael.
> * Replaced the CONFIG_IMA in x86 and s390 with new config, else it was
> resulting in redefinition when the IMA_SECURE_AND_OR_TRUSTED_BOOT
> is not enabled. Thanks to Mimi for identifying the problem.
> * Removed "#ifdef EFI" check in the arch/x86/Makefile for compiling
> ima_arch.c file.
> * Ard, Thanks for your Acked-by. I have changed the arch/x86/Makefile in
> this version. Can you please review again and confirm ?
> * Rudo, Thanks for your review. I have changed arch/s390/Makefile as well.
> Can you also please review again ?

Looks good to me

for the s390 part
Acked-by: Philipp Rudo <prudo@linux.ibm.com>

Thanks
Philipp

> 
> v2:
> * Fixed the issue identified by Mimi. Thanks Mimi, Ard, Heiko and Michael for
> discussing the fix.
> 
>  arch/powerpc/Kconfig           | 1 +
>  arch/s390/Kconfig              | 1 +
>  arch/s390/kernel/Makefile      | 2 +-
>  arch/x86/Kconfig               | 1 +
>  arch/x86/kernel/Makefile       | 4 +---
>  include/linux/ima.h            | 3 +--
>  security/integrity/ima/Kconfig | 7 +++++++
>  7 files changed, 13 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 497b7d0b2d7e..5b9f1cba2a44 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -979,6 +979,7 @@ config PPC_SECURE_BOOT
>  	bool
>  	depends on PPC_POWERNV
>  	depends on IMA_ARCH_POLICY
> +	imply IMA_SECURE_AND_OR_TRUSTED_BOOT
>  	help
>  	  Systems with firmware secure boot enabled need to define security
>  	  policies to extend secure boot to the OS. This config allows a user
> diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
> index 8abe77536d9d..59c216af6264 100644
> --- a/arch/s390/Kconfig
> +++ b/arch/s390/Kconfig
> @@ -195,6 +195,7 @@ config S390
>  	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
>  	select SWIOTLB
>  	select GENERIC_ALLOCATOR
> +	imply IMA_SECURE_AND_OR_TRUSTED_BOOT
>  
>  
>  config SCHED_OMIT_FRAME_POINTER
> diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
> index 2b1203cf7be6..578a6fa82ea4 100644
> --- a/arch/s390/kernel/Makefile
> +++ b/arch/s390/kernel/Makefile
> @@ -70,7 +70,7 @@ obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
>  obj-$(CONFIG_KEXEC_FILE)	+= machine_kexec_file.o kexec_image.o
>  obj-$(CONFIG_KEXEC_FILE)	+= kexec_elf.o
>  
> -obj-$(CONFIG_IMA)		+= ima_arch.o
> +obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT)	+= ima_arch.o
>  
>  obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_cpum_cf_common.o
>  obj-$(CONFIG_PERF_EVENTS)	+= perf_cpum_cf.o perf_cpum_sf.o
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index beea77046f9b..dcf5b1729f7c 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -230,6 +230,7 @@ config X86
>  	select VIRT_TO_BUS
>  	select X86_FEATURE_NAMES		if PROC_FS
>  	select PROC_PID_ARCH_STATUS		if PROC_FS
> +	imply IMA_SECURE_AND_OR_TRUSTED_BOOT    if EFI
>  
>  config INSTRUCTION_DECODER
>  	def_bool y
> diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
> index 9b294c13809a..cfef37a27def 100644
> --- a/arch/x86/kernel/Makefile
> +++ b/arch/x86/kernel/Makefile
> @@ -154,6 +154,4 @@ ifeq ($(CONFIG_X86_64),y)
>  	obj-y				+= vsmp_64.o
>  endif
>  
> -ifdef CONFIG_EFI
> -obj-$(CONFIG_IMA)			+= ima_arch.o
> -endif
> +obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT)	+= ima_arch.o
> diff --git a/include/linux/ima.h b/include/linux/ima.h
> index 1659217e9b60..aefe758f4466 100644
> --- a/include/linux/ima.h
> +++ b/include/linux/ima.h
> @@ -30,8 +30,7 @@ extern void ima_kexec_cmdline(const void *buf, int size);
>  extern void ima_add_kexec_buffer(struct kimage *image);
>  #endif
>  
> -#if (defined(CONFIG_X86) && defined(CONFIG_EFI)) || defined(CONFIG_S390) \
> -	|| defined(CONFIG_PPC_SECURE_BOOT)
> +#ifdef CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
>  extern bool arch_ima_get_secureboot(void);
>  extern const char * const *arch_get_ima_policy(void);
>  #else
> diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
> index 3f3ee4e2eb0d..edde88dbe576 100644
> --- a/security/integrity/ima/Kconfig
> +++ b/security/integrity/ima/Kconfig
> @@ -327,3 +327,10 @@ config IMA_QUEUE_EARLY_BOOT_KEYS
>  	depends on IMA_MEASURE_ASYMMETRIC_KEYS
>  	depends on SYSTEM_TRUSTED_KEYRING
>  	default y
> +
> +config IMA_SECURE_AND_OR_TRUSTED_BOOT
> +       bool
> +       depends on IMA_ARCH_POLICY
> +       help
> +          This option is selected by architectures to enable secure and/or
> +          trusted boot based on IMA runtime policies.


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3] ima: add a new CONFIG for loading arch-specific policies
  2020-03-09  0:57 [PATCH v3] ima: add a new CONFIG for loading arch-specific policies Nayna Jain
  2020-03-11 18:35 ` Philipp Rudo
@ 2020-03-12 11:15 ` Michael Ellerman
  1 sibling, 0 replies; 5+ messages in thread
From: Michael Ellerman @ 2020-03-12 11:15 UTC (permalink / raw)
  To: Nayna Jain, linux-integrity, linuxppc-dev, linux-efi, linux-s390, x86
  Cc: Ard Biesheuvel, Philipp Rudo, zohar, Thomas Gleixner,
	linux-kernel, Nayna Jain, Nayna Jain

Nayna Jain <nayna@linux.ibm.com> writes:
> From: Nayna Jain <nayna@linux.vnet.ibm.com>
>
> Every time a new architecture defines the IMA architecture specific
> functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
> include file needs to be updated. To avoid this "noise", this patch
> defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
> the different architectures to select it.
>
> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
> Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
> Acked-by: Ard Biesheuvel <ardb@kernel.org>
> Cc: Ard Biesheuvel <ardb@kernel.org>
> Cc: Philipp Rudo <prudo@linux.ibm.com>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> ---
> v3:
> * Removes CONFIG_IMA dependency. Thanks Ard.
> * Updated the patch with improvements suggested by Michael. It now uses
> "imply" instead of "select". Thanks Michael.

Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)

cheers

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3] ima: add a new CONFIG for loading arch-specific policies
  2020-03-06 17:39 Nayna Jain
@ 2020-03-06 17:59 ` Nayna
  0 siblings, 0 replies; 5+ messages in thread
From: Nayna @ 2020-03-06 17:59 UTC (permalink / raw)
  To: Nayna Jain, linux-integrity, linuxppc-dev, linux-efi, linux-s390,
	zohar, Philipp Rudo, Ard Biesheuvel
  Cc: linux-kernel

Oops,  Please ignore this patch.

By mistake I posted the wrong version. I am sorry for the confusion,  I 
will resend the right version.

Thanks & Regards,

      - Nayna

On 3/6/20 12:39 PM, Nayna Jain wrote:
> Every time a new architecture defines the IMA architecture specific
> functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
> include file needs to be updated. To avoid this "noise", this patch
> defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
> the different architectures to select it.
>
> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
> Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
> Cc: Ard Biesheuvel <ardb@kernel.org>
> Cc: Philipp Rudo <prudo@linux.ibm.com>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> ---
> v3:
> * Updated and tested the patch with improvements suggested by Michael.
> It now uses "imply" instead of "select". Thanks Michael.
> * Have missed replacing the CONFIG_IMA in x86 and s390 with new config,
> that was resulting in redefinition when the IMA_SECURE_AND_OR_TRUSTED_BOOT
> is not enabled. Thanks to Mimi for recognizing the problem.
>
> v2:
> * Fixed the issue identified by Mimi. Thanks Mimi, Ard, Heiko and Michael for
> discussing the fix.
>
>   arch/powerpc/Kconfig           | 1 +
>   arch/s390/Kconfig              | 1 +
>   arch/s390/kernel/Makefile      | 2 +-
>   arch/x86/Kconfig               | 1 +
>   arch/x86/kernel/Makefile       | 2 +-
>   include/linux/ima.h            | 3 +--
>   security/integrity/ima/Kconfig | 8 ++++++++
>   7 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 497b7d0b2d7e..a5cfde432983 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -979,6 +979,7 @@ config PPC_SECURE_BOOT
>   	bool
>   	depends on PPC_POWERNV
>   	depends on IMA_ARCH_POLICY
> +	select IMA_SECURE_AND_OR_TRUSTED_BOOT
>   	help
>   	  Systems with firmware secure boot enabled need to define security
>   	  policies to extend secure boot to the OS. This config allows a user
> diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
> index 8abe77536d9d..4a502fbcb800 100644
> --- a/arch/s390/Kconfig
> +++ b/arch/s390/Kconfig
> @@ -195,6 +195,7 @@ config S390
>   	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
>   	select SWIOTLB
>   	select GENERIC_ALLOCATOR
> +	select IMA_SECURE_AND_OR_TRUSTED_BOOT if IMA_ARCH_POLICY
>   
>   
>   config SCHED_OMIT_FRAME_POINTER
> diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
> index 2b1203cf7be6..578a6fa82ea4 100644
> --- a/arch/s390/kernel/Makefile
> +++ b/arch/s390/kernel/Makefile
> @@ -70,7 +70,7 @@ obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
>   obj-$(CONFIG_KEXEC_FILE)	+= machine_kexec_file.o kexec_image.o
>   obj-$(CONFIG_KEXEC_FILE)	+= kexec_elf.o
>   
> -obj-$(CONFIG_IMA)		+= ima_arch.o
> +obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT)	+= ima_arch.o
>   
>   obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_cpum_cf_common.o
>   obj-$(CONFIG_PERF_EVENTS)	+= perf_cpum_cf.o perf_cpum_sf.o
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index beea77046f9b..7f5bfaf0cbd2 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -230,6 +230,7 @@ config X86
>   	select VIRT_TO_BUS
>   	select X86_FEATURE_NAMES		if PROC_FS
>   	select PROC_PID_ARCH_STATUS		if PROC_FS
> +	select IMA_SECURE_AND_OR_TRUSTED_BOOT	if EFI && IMA_ARCH_POLICY
>   
>   config INSTRUCTION_DECODER
>   	def_bool y
> diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
> index 9b294c13809a..7f131ceba136 100644
> --- a/arch/x86/kernel/Makefile
> +++ b/arch/x86/kernel/Makefile
> @@ -155,5 +155,5 @@ ifeq ($(CONFIG_X86_64),y)
>   endif
>   
>   ifdef CONFIG_EFI
> -obj-$(CONFIG_IMA)			+= ima_arch.o
> +obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT)	+= ima_arch.o
>   endif
> diff --git a/include/linux/ima.h b/include/linux/ima.h
> index 1659217e9b60..aefe758f4466 100644
> --- a/include/linux/ima.h
> +++ b/include/linux/ima.h
> @@ -30,8 +30,7 @@ extern void ima_kexec_cmdline(const void *buf, int size);
>   extern void ima_add_kexec_buffer(struct kimage *image);
>   #endif
>   
> -#if (defined(CONFIG_X86) && defined(CONFIG_EFI)) || defined(CONFIG_S390) \
> -	|| defined(CONFIG_PPC_SECURE_BOOT)
> +#ifdef CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
>   extern bool arch_ima_get_secureboot(void);
>   extern const char * const *arch_get_ima_policy(void);
>   #else
> diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
> index 3f3ee4e2eb0d..2baaf196c6d8 100644
> --- a/security/integrity/ima/Kconfig
> +++ b/security/integrity/ima/Kconfig
> @@ -327,3 +327,11 @@ config IMA_QUEUE_EARLY_BOOT_KEYS
>   	depends on IMA_MEASURE_ASYMMETRIC_KEYS
>   	depends on SYSTEM_TRUSTED_KEYRING
>   	default y
> +
> +config IMA_SECURE_AND_OR_TRUSTED_BOOT
> +	bool
> +	depends on IMA_ARCH_POLICY
> +	default n
> +	help
> +	   This option is selected by architectures to enable secure and/or
> +	   trusted boot based on IMA runtime policies.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v3] ima: add a new CONFIG for loading arch-specific policies
@ 2020-03-06 17:39 Nayna Jain
  2020-03-06 17:59 ` Nayna
  0 siblings, 1 reply; 5+ messages in thread
From: Nayna Jain @ 2020-03-06 17:39 UTC (permalink / raw)
  To: linux-integrity, linuxppc-dev, linux-efi, linux-s390
  Cc: Ard Biesheuvel, Philipp Rudo, Michael Ellerman, zohar,
	linux-kernel, Nayna Jain

Every time a new architecture defines the IMA architecture specific
functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
include file needs to be updated. To avoid this "noise", this patch
defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
the different architectures to select it.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Philipp Rudo <prudo@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
---
v3:
* Updated and tested the patch with improvements suggested by Michael.
It now uses "imply" instead of "select". Thanks Michael.
* Have missed replacing the CONFIG_IMA in x86 and s390 with new config,
that was resulting in redefinition when the IMA_SECURE_AND_OR_TRUSTED_BOOT
is not enabled. Thanks to Mimi for recognizing the problem.

v2:
* Fixed the issue identified by Mimi. Thanks Mimi, Ard, Heiko and Michael for
discussing the fix.

 arch/powerpc/Kconfig           | 1 +
 arch/s390/Kconfig              | 1 +
 arch/s390/kernel/Makefile      | 2 +-
 arch/x86/Kconfig               | 1 +
 arch/x86/kernel/Makefile       | 2 +-
 include/linux/ima.h            | 3 +--
 security/integrity/ima/Kconfig | 8 ++++++++
 7 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 497b7d0b2d7e..a5cfde432983 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -979,6 +979,7 @@ config PPC_SECURE_BOOT
 	bool
 	depends on PPC_POWERNV
 	depends on IMA_ARCH_POLICY
+	select IMA_SECURE_AND_OR_TRUSTED_BOOT
 	help
 	  Systems with firmware secure boot enabled need to define security
 	  policies to extend secure boot to the OS. This config allows a user
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 8abe77536d9d..4a502fbcb800 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -195,6 +195,7 @@ config S390
 	select ARCH_HAS_FORCE_DMA_UNENCRYPTED
 	select SWIOTLB
 	select GENERIC_ALLOCATOR
+	select IMA_SECURE_AND_OR_TRUSTED_BOOT if IMA_ARCH_POLICY
 
 
 config SCHED_OMIT_FRAME_POINTER
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 2b1203cf7be6..578a6fa82ea4 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -70,7 +70,7 @@ obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 obj-$(CONFIG_KEXEC_FILE)	+= machine_kexec_file.o kexec_image.o
 obj-$(CONFIG_KEXEC_FILE)	+= kexec_elf.o
 
-obj-$(CONFIG_IMA)		+= ima_arch.o
+obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT)	+= ima_arch.o
 
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_cpum_cf_common.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_cpum_cf.o perf_cpum_sf.o
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index beea77046f9b..7f5bfaf0cbd2 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -230,6 +230,7 @@ config X86
 	select VIRT_TO_BUS
 	select X86_FEATURE_NAMES		if PROC_FS
 	select PROC_PID_ARCH_STATUS		if PROC_FS
+	select IMA_SECURE_AND_OR_TRUSTED_BOOT	if EFI && IMA_ARCH_POLICY
 
 config INSTRUCTION_DECODER
 	def_bool y
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9b294c13809a..7f131ceba136 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -155,5 +155,5 @@ ifeq ($(CONFIG_X86_64),y)
 endif
 
 ifdef CONFIG_EFI
-obj-$(CONFIG_IMA)			+= ima_arch.o
+obj-$(CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT)	+= ima_arch.o
 endif
diff --git a/include/linux/ima.h b/include/linux/ima.h
index 1659217e9b60..aefe758f4466 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -30,8 +30,7 @@ extern void ima_kexec_cmdline(const void *buf, int size);
 extern void ima_add_kexec_buffer(struct kimage *image);
 #endif
 
-#if (defined(CONFIG_X86) && defined(CONFIG_EFI)) || defined(CONFIG_S390) \
-	|| defined(CONFIG_PPC_SECURE_BOOT)
+#ifdef CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
 extern bool arch_ima_get_secureboot(void);
 extern const char * const *arch_get_ima_policy(void);
 #else
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index 3f3ee4e2eb0d..2baaf196c6d8 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -327,3 +327,11 @@ config IMA_QUEUE_EARLY_BOOT_KEYS
 	depends on IMA_MEASURE_ASYMMETRIC_KEYS
 	depends on SYSTEM_TRUSTED_KEYRING
 	default y
+
+config IMA_SECURE_AND_OR_TRUSTED_BOOT
+	bool
+	depends on IMA_ARCH_POLICY
+	default n
+	help
+	   This option is selected by architectures to enable secure and/or
+	   trusted boot based on IMA runtime policies.
-- 
2.18.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-09  0:57 [PATCH v3] ima: add a new CONFIG for loading arch-specific policies Nayna Jain
2020-03-11 18:35 ` Philipp Rudo
2020-03-12 11:15 ` Michael Ellerman
  -- strict thread matches above, loose matches on Subject: below --
2020-03-06 17:39 Nayna Jain
2020-03-06 17:59 ` Nayna

Linux-Integrity Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-integrity/0 linux-integrity/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-integrity linux-integrity/ https://lore.kernel.org/linux-integrity \
		linux-integrity@vger.kernel.org
	public-inbox-index linux-integrity

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-integrity


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git