Linux-Integrity Archive on
 help / color / Atom feed
From: Thiago Jung Bauermann <>
To: Prakhar Srivastava <>
Cc: Rob Herring <>,
	Mark Rutland <>,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Subject: Re: [RFC][PATCH 0/2] Add support for using reserved memory for ima buffer pass
Date: Sat, 23 May 2020 01:08:13 -0300
Message-ID: <87v9knpa36.fsf@morokweng.localdomain> (raw)
In-Reply-To: <>

Hello Prakhar,

Prakhar Srivastava <> writes:

> On 5/12/20 4:05 PM, Rob Herring wrote:
>> On Wed, May 06, 2020 at 10:50:04PM -0700, Prakhar Srivastava wrote:
>>> Hi Mark,
>> Please don't top post.
>>> This patch set currently only address the Pure DT implementation.
>>> EFI and ACPI implementations will be posted in subsequent patchsets.
>>> The logs are intended to be carried over the kexec and once read the
>>> logs are no longer needed and in prior conversation with James(
>>> the apporach of using a chosen node doesn't
>>> support the case.
>>> The DT entries make the reservation permanent and thus doesnt need kernel
>>> segments to be used for this, however using a chosen-node with
>>> reserved memory only changes the node information but memory still is
>>> reserved via reserved-memory section.
>> I think Mark's point was whether it needs to be permanent. We don't
>> hardcode the initrd address for example.
> Thankyou for clarifying my misunderstanding, i am modelling this keeping to the
> TPM log implementation that uses a reserved memory. I will rev up the version
> with chosen-node support.
> That will make the memory reservation free after use.

Nice. Do you intend to use the same property that powerpc uses

>>> On 5/5/20 2:59 AM, Mark Rutland wrote:
>>>> Hi Prakhar,
>>>> On Mon, May 04, 2020 at 01:38:27PM -0700, Prakhar Srivastava wrote:
>>>>> IMA during kexec(kexec file load) verifies the kernel signature and measures
>> What's IMAIMA is a LSM attempting to detect if files have been accidentally or
> maliciously altered, both remotely and locally, it can also be used
> to appraise a file's measurement against a "good" value stored as an extended
> attribute, and enforce local file integrity.
> IMA also validates and measures the signers of the kernel and initrd
> during kexec. The measurements are extended to PCR 10(configurable) and the logs
> stored in memory, however once kexec'd the logs are lost. Kexec is used as
> secondary boot loader in may use cases and loosing the signer
> creates a security hole.
> This patch is an implementation to carry over the logs and making it
> possible to remotely validate the signers of the kernel and initrd. Such a
> support exits only in powerpc.
> This patch makes the carry over of logs architecture independent and puts the
> complexity in a driver.

If I'm not mistaken, the code at arch/powerpc/kexec/ima.c isn't actually
powerpc-specific. It could be moved to an arch-independent directory and
used by any other architecture which supports device trees.

I think that's the simplest way forward. And to be honest I'm still
trying to understand why you didn't take that approach. Did you try it
and hit some obstacle or noticed a disadvantage for your use case?

Thiago Jung Bauermann
IBM Linux Technology Center

  reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-04 20:38 Prakhar Srivastava
2020-05-04 20:38 ` [RFC][PATCH 1/2] Add a layer of abstraction to use the memory reserved by device tree " Prakhar Srivastava
2020-05-12 23:09   ` Rob Herring
2020-05-18 20:34     ` Prakhar Srivastava
2020-05-04 20:38 ` [RFC][PATCH 2/2] Add support for ima buffer pass using reserved memory arm64 Prakhar Srivastava
2020-05-05  9:59 ` [RFC][PATCH 0/2] Add support for using reserved memory for ima buffer pass Mark Rutland
2020-05-07  5:50   ` Prakhar Srivastava
2020-05-12 23:05     ` Rob Herring
2020-05-18 20:16       ` Prakhar Srivastava
2020-05-23  4:08         ` Thiago Jung Bauermann [this message]
  -- strict thread matches above, loose matches on Subject: below --
2020-05-01 18:15 Prakhar Srivastava

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87v9knpa36.fsf@morokweng.localdomain \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Integrity Archive on

Archives are clonable:
	git clone --mirror linux-integrity/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-integrity linux-integrity/ \
	public-inbox-index linux-integrity

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone