Linux-Integrity Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2] tpm: Fix the description error of the help information in Kconfig
@ 2020-07-27  8:22 Tianjia Zhang
  2020-07-27  8:32 ` Arnd Bergmann
  0 siblings, 1 reply; 3+ messages in thread
From: Tianjia Zhang @ 2020-07-27  8:22 UTC (permalink / raw)
  To: christophe.ricard, peterhuewe, jarkko.sakkinen, jgg, arnd,
	gregkh, linux-integrity, linux-kernel
  Cc: tianjia.zhang

SPI protocol standardized by the TCG is described in the TCG PTP
specification 1.3 (chapter 6.4.6 SPI Bit Protocol), It was published by
TCG_PCClientTPMInterfaceSpecification_TIS__1-3_27_03212013.pdf.

The TPM version number in the help message is wrong, which will
cause confusion. This patch fixes it.

Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
---
 drivers/char/tpm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 58b4c573d176..8eedb3e704f3 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -62,7 +62,7 @@ config TCG_TIS_SPI
 	help
 	  If you have a TPM security chip which is connected to a regular,
 	  non-tcg SPI master (i.e. most embedded platforms) that is compliant with the
-	  TCG TIS 1.3 TPM specification (TPM1.2) or the TCG PTP FIFO
+	  TCG TIS 1.3 TPM specification (TPM1.3) or the TCG PTP FIFO
 	  specification (TPM2.0) say Yes and it will be accessible from
 	  within Linux. To compile this driver as a module, choose  M here;
 	  the module will be called tpm_tis_spi.
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-27  8:22 [PATCH v2] tpm: Fix the description error of the help information in Kconfig Tianjia Zhang
2020-07-27  8:32 ` Arnd Bergmann
2020-07-28 12:33   ` Tianjia Zhang

Linux-Integrity Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-integrity/0 linux-integrity/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-integrity linux-integrity/ https://lore.kernel.org/linux-integrity \
		linux-integrity@vger.kernel.org
	public-inbox-index linux-integrity

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-integrity


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git