[PATCH v2 00/12] Clean up "mediatek,larb" after adding device_link

[PATCH v2 00/12] Clean up "mediatek,larb" after adding device_link

[Yong Wu]

MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

MediaTek IOMMU don't have its power-domain. When the consumer works,
it should enable the smi-larb's power which also need enable the smi-common's
power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

This patchset depends on "MT8183 IOMMU SUPPORT"[1].

[1] https://lists.linuxfoundation.org/pipermail/iommu/2019-June/036552.html

Change notes:
v2:
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html

Yong Wu (12):
  dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  iommu/mediatek: Use builtin_platform_driver
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

 .../bindings/display/mediatek/mediatek,disp.txt    |  9 -----
 .../bindings/media/mediatek-jpeg-decoder.txt       |  4 --
 .../devicetree/bindings/media/mediatek-mdp.txt     |  8 ----
 .../devicetree/bindings/media/mediatek-vcodec.txt  |  4 --
 arch/arm/boot/dts/mt2701.dtsi                      |  1 -
 arch/arm/boot/dts/mt7623.dtsi                      |  1 -
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           | 15 -------
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c            | 11 -----
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        | 26 ------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  1 -
 drivers/iommu/mtk_iommu.c                          | 45 +++++++--------------
 drivers/iommu/mtk_iommu_v1.c                       | 39 +++++++-----------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    | 22 ----------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h    |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      | 38 -----------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 21 ----------
 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ----------------------
 drivers/memory/mtk-smi.c                           | 31 ++++----------
 include/soc/mediatek/smi.h                         | 20 ---------
 23 files changed, 36 insertions(+), 316 deletions(-)

-- 
1.9.1 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 01/12] dt-binding: mediatek: Get rid of mediatek, larb for multimedia HW

[Yong Wu]

After adding device_link between the consumer with the smi-larbs,
if the consumer call its owner pm_runtime_get(_sync), the
pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. Thus, the consumer don't need the property.

And IOMMU also know which larb this consumer connects with from
iommu id in the "iommus=" property.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,disp.txt       | 9 ---------
 .../devicetree/bindings/media/mediatek-jpeg-decoder.txt          | 4 ----
 Documentation/devicetree/bindings/media/mediatek-mdp.txt         | 8 --------
 Documentation/devicetree/bindings/media/mediatek-vcodec.txt      | 4 ----
 4 files changed, 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index 8469de5..464b92f 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -56,8 +56,6 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
   the supported chips are mt2701 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
@@ -78,7 +76,6 @@ ovl0: ovl@1400c000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL0>;
 	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
 };
 
 ovl1: ovl@1400d000 {
@@ -88,7 +85,6 @@ ovl1: ovl@1400d000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_OVL1>;
 	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma0: rdma@1400e000 {
@@ -98,7 +94,6 @@ rdma0: rdma@1400e000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 rdma1: rdma@1400f000 {
@@ -108,7 +103,6 @@ rdma1: rdma@1400f000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 rdma2: rdma@14010000 {
@@ -118,7 +112,6 @@ rdma2: rdma@14010000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
 };
 
 wdma0: wdma@14011000 {
@@ -128,7 +121,6 @@ wdma0: wdma@14011000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
 };
 
 wdma1: wdma@14012000 {
@@ -138,7 +130,6 @@ wdma1: wdma@14012000 {
 	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
 };
 
 color0: color@14013000 {
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
index 044b119..7978f21 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
@@ -15,9 +15,6 @@ Required properties:
 - clock-names: must contain "jpgdec-smi" and "jpgdec".
 - power-domains: a phandle to the power domain, see
   Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
-  for details.
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
@@ -32,7 +29,6 @@ Example:
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index 0d03e3a..df69c5a 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index b6b5dde..5c9ee6a 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -9,7 +9,6 @@ Required properties:
 - reg : Physical base address of the video codec registers and length of
   memory mapped region.
 - interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
 - clocks : list of clock specifiers, corresponding to entries in
   the clock-names property.
 - clock-names: encoder must contain "venc_sel_src", "venc_sel",,
@@ -39,7 +38,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x16027800 0 0x800>,   /*VP8_VL*/
           <0 0x16028400 0 0x400>;   /*VP9_VD*/
     interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
     iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
              <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
              <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -83,8 +81,6 @@ vcodec_dec: vcodec@16000000 {
           <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
     interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
 		 <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb3>,
-		    <&larb5>;
     iommus = <&iommu M4U_PORT_VENC_RCPU>,
              <&iommu M4U_PORT_VENC_REC>,
              <&iommu M4U_PORT_VENC_BSDMA>,
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 02/12] iommu/mediatek: Add probe_defer for smi-larb

[Yong Wu]

The iommu consumer should use device_link to connect with the
smi-larb(supplier). then the smi-larb should run before the iommu
consumer. Here we delay the iommu driver until the smi driver is
ready, then all the iommu consumer always is after the smi driver.

When there is no this patch, if some consumer drivers run before
smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
device_link_add, then device_links_driver_bound will use WARN_ON
to complain that the link_status of supplier is not right.

This is a preparing patch for adding device_link.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c    | 2 +-
 drivers/iommu/mtk_iommu_v1.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 6fe3369..f7599d8 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -664,7 +664,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			id = i;
 
 		plarbdev = of_find_device_by_node(larbnode);
-		if (!plarbdev) {
+		if (!plarbdev || !plarbdev->dev.driver) {
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 0b0908c..c43c4a0 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -604,7 +604,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			plarbdev = of_platform_device_create(
 						larb_spec.np, NULL,
 						platform_bus_type.dev_root);
-			if (!plarbdev) {
+			if (!plarbdev || !plarbdev->dev.driver) {
 				of_node_put(larb_spec.np);
 				return -EPROBE_DEFER;
 			}
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 03/12] iommu/mediatek: Add device_link between the consumer and the larb devices

[Yong Wu]

MediaTek IOMMU don't have its power-domain. all the consumer connect
with smi-larb, then connect with smi-common.

        M4U
         |
    smi-common
         |
  -------------
  |         |    ...
  |         |
larb1     larb2
  |         |
vdec       venc

When the consumer works, it should enable the smi-larb's power which
also need enable the smi-common's power firstly.

Thus, First of all, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

This patch adds device_link between the consumer and the larbs.

Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c    | 12 ++++++++++++
 drivers/iommu/mtk_iommu_v1.c | 13 ++++++++++++-
 2 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index f7599d8..7b70574 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -440,6 +440,9 @@ static int mtk_iommu_add_device(struct device *dev)
 	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
 	struct mtk_iommu_data *data;
 	struct iommu_group *group;
+	struct device_link *link;
+	struct device *larbdev;
+	unsigned int larbid;
 
 	if (!fwspec || fwspec->ops != &mtk_iommu_ops)
 		return -ENODEV; /* Not a iommu client device */
@@ -451,6 +454,15 @@ static int mtk_iommu_add_device(struct device *dev)
 	if (IS_ERR(group))
 		return PTR_ERR(group);
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	larbdev = data->smi_imu.larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME |
+			       DL_FLAG_AUTOREMOVE_CONSUMER);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	iommu_group_put(group);
 	return 0;
 }
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index c43c4a0..845e20b 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -423,7 +423,9 @@ static int mtk_iommu_add_device(struct device *dev)
 	struct of_phandle_iterator it;
 	struct mtk_iommu_data *data;
 	struct iommu_group *group;
-	int err;
+	struct device_link *link;
+	struct device *larbdev;
+	int err, larbid;
 
 	of_for_each_phandle(&it, err, dev->of_node, "iommus",
 			"#iommu-cells", 0) {
@@ -466,6 +468,15 @@ static int mtk_iommu_add_device(struct device *dev)
 		return err;
 	}
 
+	/* Link the consumer device with the smi-larb device(supplier) */
+	larbid = mt2701_m4u_to_larb(fwspec->ids[0]);
+	larbdev = data->smi_imu.larb_imu[larbid].dev;
+	link = device_link_add(dev, larbdev,
+			       DL_FLAG_PM_RUNTIME |
+			       DL_FLAG_AUTOREMOVE_CONSUMER);
+	if (!link)
+		dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
+
 	return iommu_device_link(&data->iommu, dev);
 }
 
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 04/12] memory: mtk-smi: Add device-link between smi-larb and smi-common

[Yong Wu]

Normally, If the smi-larb HW need work, we should enable the smi-common
HW power and clock firstly.
This patch adds device-link between the smi-larb dev and the smi-common
dev. then If pm_runtime_get_sync(smi-larb-dev), the pm_runtime_get_sync
(smi-common-dev) will be called automatically.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 9688341..98b1180 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -271,6 +271,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *smi_node;
 	struct platform_device *smi_pdev;
+	struct device_link *link;
 
 	larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
 	if (!larb)
@@ -310,6 +311,13 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 		if (!platform_get_drvdata(smi_pdev))
 			return -EPROBE_DEFER;
 		larb->smi_common_dev = &smi_pdev->dev;
+		link = device_link_add(dev, larb->smi_common_dev,
+				       DL_FLAG_PM_RUNTIME |
+				       DL_FLAG_AUTOREMOVE_CONSUMER);
+		if (!link) {
+			dev_err(dev, "Unable to link smi-common dev\n");
+			return -ENODEV;
+		}
 	} else {
 		dev_err(dev, "Failed to get the smi_common device\n");
 		return -EINVAL;
@@ -333,17 +341,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
 	int ret;
 
-	/* Power on smi-common. */
-	ret = pm_runtime_get_sync(larb->smi_common_dev);
-	if (ret < 0) {
-		dev_err(dev, "Failed to pm get for smi-common(%d).\n", ret);
-		return ret;
-	}
-
 	ret = mtk_smi_clk_enable(&larb->smi);
 	if (ret < 0) {
 		dev_err(dev, "Failed to enable clock(%d).\n", ret);
-		pm_runtime_put_sync(larb->smi_common_dev);
 		return ret;
 	}
 
@@ -358,7 +358,6 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
 
 	mtk_smi_clk_disable(&larb->smi);
-	pm_runtime_put_sync(larb->smi_common_dev);
 	return 0;
 }
 
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put

[Yong Wu]

MediaTek IOMMU has already added device_link between the consumer
and smi-larb device. If the jpg device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Rick Chang <rick.chang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 22 ----------------------
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h |  2 --
 2 files changed, 24 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index f761e4d..2f37538 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -29,7 +29,6 @@
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-core.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_jpeg_hw.h"
 #include "mtk_jpeg_core.h"
@@ -901,11 +900,6 @@ static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq,
 
 static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
 {
-	int ret;
-
-	ret = mtk_smi_larb_get(jpeg->larb);
-	if (ret)
-		dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
 	clk_prepare_enable(jpeg->clk_jdec_smi);
 	clk_prepare_enable(jpeg->clk_jdec);
 }
@@ -914,7 +908,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
 {
 	clk_disable_unprepare(jpeg->clk_jdec);
 	clk_disable_unprepare(jpeg->clk_jdec_smi);
-	mtk_smi_larb_put(jpeg->larb);
 }
 
 static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
@@ -1059,21 +1052,6 @@ static int mtk_jpeg_release(struct file *file)
 
 static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
 {
-	struct device_node *node;
-	struct platform_device *pdev;
-
-	node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
-	if (!node)
-		return -EINVAL;
-	pdev = of_find_device_by_node(node);
-	if (WARN_ON(!pdev)) {
-		of_node_put(node);
-		return -EINVAL;
-	}
-	of_node_put(node);
-
-	jpeg->larb = &pdev->dev;
-
 	jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec");
 	if (IS_ERR(jpeg->clk_jdec))
 		return PTR_ERR(jpeg->clk_jdec);
diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
index 1a6cdfd..e35fb79 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
@@ -55,7 +55,6 @@ enum mtk_jpeg_ctx_state {
  * @dec_reg_base:	JPEG registers mapping
  * @clk_jdec:		JPEG hw working clock
  * @clk_jdec_smi:	JPEG SMI bus clock
- * @larb:		SMI device
  */
 struct mtk_jpeg_dev {
 	struct mutex		lock;
@@ -69,7 +68,6 @@ struct mtk_jpeg_dev {
 	void __iomem		*dec_reg_base;
 	struct clk		*clk_jdec;
 	struct clk		*clk_jdec_smi;
-	struct device		*larb;
 };
 
 /**
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 06/12] media: mtk-mdp: Get rid of mtk_smi_larb_get/put

[Yong Wu]

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the mdp device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 38 ---------------------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 --
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 3 files changed, 41 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
index 03aba03..4f7cbc4 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
@@ -17,7 +17,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_comp.h"
 
@@ -66,14 +65,6 @@ void mtk_mdp_comp_clock_on(struct device *dev, struct mtk_mdp_comp *comp)
 {
 	int i, err;
 
-	if (comp->larb_dev) {
-		err = mtk_smi_larb_get(comp->larb_dev);
-		if (err)
-			dev_err(dev,
-				"failed to get larb, err %d. type:%d id:%d\n",
-				err, comp->type, comp->id);
-	}
-
 	for (i = 0; i < ARRAY_SIZE(comp->clk); i++) {
 		if (IS_ERR(comp->clk[i]))
 			continue;
@@ -94,16 +85,11 @@ void mtk_mdp_comp_clock_off(struct device *dev, struct mtk_mdp_comp *comp)
 			continue;
 		clk_disable_unprepare(comp->clk[i]);
 	}
-
-	if (comp->larb_dev)
-		mtk_smi_larb_put(comp->larb_dev);
 }
 
 int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 		      struct mtk_mdp_comp *comp, enum mtk_mdp_comp_id comp_id)
 {
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
 	int i;
 
 	if (comp_id < 0 || comp_id >= MTK_MDP_COMP_ID_MAX) {
@@ -124,30 +110,6 @@ int mtk_mdp_comp_init(struct device *dev, struct device_node *node,
 			break;
 	}
 
-	/* Only DMA capable components need the LARB property */
-	comp->larb_dev = NULL;
-	if (comp->type != MTK_MDP_RDMA &&
-	    comp->type != MTK_MDP_WDMA &&
-	    comp->type != MTK_MDP_WROT)
-		return 0;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev,
-			"Missing mediadek,larb phandle in %pOF node\n", node);
-		return -EINVAL;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		return -EPROBE_DEFER;
-	}
-	of_node_put(larb_node);
-
-	comp->larb_dev = &larb_pdev->dev;
-
 	return 0;
 }
 
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
index 63b3983..602d577 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
@@ -47,7 +47,6 @@ enum mtk_mdp_comp_id {
  * @dev_node:	component device node
  * @clk:	clocks required for component
  * @regs:	Mapped address of component registers.
- * @larb_dev:	SMI device required for component
  * @type:	component type
  * @id:		component ID
  */
@@ -55,7 +54,6 @@ struct mtk_mdp_comp {
 	struct device_node	*dev_node;
 	struct clk		*clk[2];
 	void __iomem		*regs;
-	struct device		*larb_dev;
 	enum mtk_mdp_comp_type	type;
 	enum mtk_mdp_comp_id	id;
 };
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index bbb24fb..adb098d 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -25,7 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/workqueue.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_mdp_core.h"
 #include "mtk_mdp_m2m.h"
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 07/12] media: mtk-vcodec: Get rid of mtk_smi_larb_get/put

[Yong Wu]

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 21 ----------
 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
 .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ----------------------
 4 files changed, 72 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index 7884465..6caad39 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -16,7 +16,6 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_dec_pm.h"
 #include "mtk_vcodec_util.h"
@@ -24,7 +23,6 @@
 
 int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *dec_clk;
@@ -35,18 +33,6 @@ int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev)
 	pm = &mtkdev->pm;
 	pm->mtkdev = mtkdev;
 	dec_clk = &pm->vdec_clk;
-	node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("of_parse_phandle mediatek,larb fail!");
-		return -1;
-	}
-
-	pdev = of_find_device_by_node(node);
-	if (WARN_ON(!pdev)) {
-		of_node_put(node);
-		return -1;
-	}
-	pm->larbvdec = &pdev->dev;
 	pdev = mtkdev->plat_dev;
 	pm->dev = &pdev->dev;
 
@@ -121,12 +107,6 @@ void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm)
 			goto error;
 		}
 	}
-
-	ret = mtk_smi_larb_get(pm->larbvdec);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret);
-		goto error;
-	}
 	return;
 
 error:
@@ -139,7 +119,6 @@ void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *dec_clk = &pm->vdec_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvdec);
 	for (i = dec_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(dec_clk->clk_info[i].vcodec_clk);
 }
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
index 662a84b..cf56b07 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
@@ -196,11 +196,8 @@ struct mtk_vcodec_clk {
  */
 struct mtk_vcodec_pm {
 	struct mtk_vcodec_clk	vdec_clk;
-	struct device	*larbvdec;
 
 	struct mtk_vcodec_clk	venc_clk;
-	struct device	*larbvenc;
-	struct device	*larbvenclt;
 	struct device	*dev;
 	struct mtk_vcodec_dev	*mtkdev;
 };
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
index 50351ad..80d1c4e 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
@@ -16,7 +16,6 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/videobuf2-dma-contig.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_drv.h"
 #include "mtk_vcodec_enc.h"
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
index 39375b8..f61c65d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
@@ -16,7 +16,6 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_vcodec_enc_pm.h"
 #include "mtk_vcodec_util.h"
@@ -25,49 +24,18 @@
 
 int mtk_vcodec_init_enc_pm(struct mtk_vcodec_dev *mtkdev)
 {
-	struct device_node *node;
 	struct platform_device *pdev;
 	struct mtk_vcodec_pm *pm;
 	struct mtk_vcodec_clk *enc_clk;
 	struct mtk_vcodec_clk_info *clk_info;
 	int ret = 0, i = 0;
-	struct device *dev;
 
 	pdev = mtkdev->plat_dev;
 	pm = &mtkdev->pm;
 	memset(pm, 0, sizeof(struct mtk_vcodec_pm));
 	pm->mtkdev = mtkdev;
 	pm->dev = &pdev->dev;
-	dev = &pdev->dev;
 	enc_clk = &pm->venc_clk;
-
-	node = of_parse_phandle(dev->of_node, "mediatek,larb", 0);
-	if (!node) {
-		mtk_v4l2_err("no mediatek,larb found");
-		return -ENODEV;
-	}
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (!pdev) {
-		mtk_v4l2_err("no mediatek,larb device found");
-		return -ENODEV;
-	}
-	pm->larbvenc = &pdev->dev;
-
-	node = of_parse_phandle(dev->of_node, "mediatek,larb", 1);
-	if (!node) {
-		mtk_v4l2_err("no mediatek,larb found");
-		return -ENODEV;
-	}
-
-	pdev = of_find_device_by_node(node);
-	of_node_put(node);
-	if (!pdev) {
-		mtk_v4l2_err("no mediatek,larb device found");
-		return -ENODEV;
-	}
-
-	pm->larbvenclt = &pdev->dev;
 	pdev = mtkdev->plat_dev;
 	pm->dev = &pdev->dev;
 
@@ -123,21 +91,8 @@ void mtk_vcodec_enc_clock_on(struct mtk_vcodec_pm *pm)
 		}
 	}
 
-	ret = mtk_smi_larb_get(pm->larbvenc);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larb3 fail %d", ret);
-		goto larbvencerr;
-	}
-	ret = mtk_smi_larb_get(pm->larbvenclt);
-	if (ret) {
-		mtk_v4l2_err("mtk_smi_larb_get larb4 fail %d", ret);
-		goto larbvenclterr;
-	}
 	return;
 
-larbvenclterr:
-	mtk_smi_larb_put(pm->larbvenc);
-larbvencerr:
 clkerr:
 	for (i -= 1; i >= 0; i--)
 		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
@@ -148,8 +103,6 @@ void mtk_vcodec_enc_clock_off(struct mtk_vcodec_pm *pm)
 	struct mtk_vcodec_clk *enc_clk = &pm->venc_clk;
 	int i = 0;
 
-	mtk_smi_larb_put(pm->larbvenc);
-	mtk_smi_larb_put(pm->larbvenclt);
 	for (i = enc_clk->clk_num - 1; i >= 0; i--)
 		clk_disable_unprepare(enc_clk->clk_info[i].vcodec_clk);
 }
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put

[Yong Wu]

MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.

CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 11 -----------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 26 --------------------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  1 -
 3 files changed, 38 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index acad088..3a21a48 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -18,7 +18,6 @@
 #include <drm/drm_probe_helper.h>
 #include <linux/clk.h>
 #include <linux/pm_runtime.h>
-#include <soc/mediatek/smi.h>
 
 #include "mtk_drm_drv.h"
 #include "mtk_drm_crtc.h"
@@ -371,20 +370,12 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
 				       struct drm_crtc_state *old_state)
 {
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
-	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
 	int ret;
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
 
-	ret = mtk_smi_larb_get(comp->larb_dev);
-	if (ret) {
-		DRM_ERROR("Failed to get larb: %d\n", ret);
-		return;
-	}
-
 	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
 	if (ret) {
-		mtk_smi_larb_put(comp->larb_dev);
 		return;
 	}
 
@@ -396,7 +387,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 					struct drm_crtc_state *old_state)
 {
 	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
-	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
 	int i;
 
 	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
@@ -419,7 +409,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	drm_crtc_vblank_off(crtc);
 	mtk_crtc_ddp_hw_fini(mtk_crtc);
-	mtk_smi_larb_put(comp->larb_dev);
 
 	mtk_crtc->enabled = false;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 54ca794..ede15c9 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -265,8 +265,6 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
 		      const struct mtk_ddp_comp_funcs *funcs)
 {
 	enum mtk_ddp_comp_type type;
-	struct device_node *larb_node;
-	struct platform_device *larb_pdev;
 
 	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
 		return -EINVAL;
@@ -296,30 +294,6 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
 	if (IS_ERR(comp->clk))
 		return PTR_ERR(comp->clk);
 
-	/* Only DMA capable components need the LARB property */
-	comp->larb_dev = NULL;
-	if (type != MTK_DISP_OVL &&
-	    type != MTK_DISP_RDMA &&
-	    type != MTK_DISP_WDMA)
-		return 0;
-
-	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
-	if (!larb_node) {
-		dev_err(dev,
-			"Missing mediadek,larb phandle in %pOF node\n", node);
-		return -EINVAL;
-	}
-
-	larb_pdev = of_find_device_by_node(larb_node);
-	if (!larb_pdev) {
-		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
-		of_node_put(larb_node);
-		return -EPROBE_DEFER;
-	}
-	of_node_put(larb_node);
-
-	comp->larb_dev = &larb_pdev->dev;
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 8399229..b8dc17e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -91,7 +91,6 @@ struct mtk_ddp_comp {
 	struct clk *clk;
 	void __iomem *regs;
 	int irq;
-	struct device *larb_dev;
 	enum mtk_ddp_comp_id id;
 	const struct mtk_ddp_comp_funcs *funcs;
 };
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 09/12] memory: mtk-smi: Get rid of mtk_smi_larb_get/put

[Yong Wu]

After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 drivers/memory/mtk-smi.c   | 14 --------------
 include/soc/mediatek/smi.h | 20 --------------------
 2 files changed, 34 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 98b1180..11d99b7 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -123,20 +123,6 @@ static void mtk_smi_clk_disable(const struct mtk_smi *smi)
 	clk_disable_unprepare(smi->clk_apb);
 }
 
-int mtk_smi_larb_get(struct device *larbdev)
-{
-	int ret = pm_runtime_get_sync(larbdev);
-
-	return (ret < 0) ? ret : 0;
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
-
-void mtk_smi_larb_put(struct device *larbdev)
-{
-	pm_runtime_put_sync(larbdev);
-}
-EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
-
 static int
 mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
 {
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 7a8d870..609397d 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -24,26 +24,6 @@ struct mtk_smi_iommu {
 	struct mtk_smi_larb_iommu larb_imu[MTK_LARB_NR_MAX];
 };
 
-/*
- * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
- *                   It also initialize some basic setting(like iommu).
- * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
- * Both should be called in non-atomic context.
- *
- * Returns 0 if successful, negative on failure.
- */
-int mtk_smi_larb_get(struct device *larbdev);
-void mtk_smi_larb_put(struct device *larbdev);
-
-#else
-
-static inline int mtk_smi_larb_get(struct device *larbdev)
-{
-	return 0;
-}
-
-static inline void mtk_smi_larb_put(struct device *larbdev) { }
-
 #endif
 
 #endif
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 10/12] iommu/mediatek: Use builtin_platform_driver

[Yong Wu]

MediaTek IOMMU should wait for smi larb which need wait for the
power domain(mtk-scpsys.c) and the multimedia ccf who both are
module init. Thus, subsys_initcall for MediaTek IOMMU is not helpful.
Switch to builtin_platform_driver.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c    | 31 +------------------------------
 drivers/iommu/mtk_iommu_v1.c | 24 +-----------------------
 2 files changed, 2 insertions(+), 53 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 7b70574..8459597 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -712,22 +712,6 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 	return component_master_add_with_match(dev, &mtk_iommu_com_ops, match);
 }
 
-static int mtk_iommu_remove(struct platform_device *pdev)
-{
-	struct mtk_iommu_data *data = platform_get_drvdata(pdev);
-
-	iommu_device_sysfs_remove(&data->iommu);
-	iommu_device_unregister(&data->iommu);
-
-	if (iommu_present(&platform_bus_type))
-		bus_set_iommu(&platform_bus_type, NULL);
-
-	clk_disable_unprepare(data->bclk);
-	devm_free_irq(&pdev->dev, data->irq, data);
-	component_master_del(&pdev->dev, &mtk_iommu_com_ops);
-	return 0;
-}
-
 static int __maybe_unused mtk_iommu_suspend(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
@@ -808,23 +792,10 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 
 static struct platform_driver mtk_iommu_driver = {
 	.probe	= mtk_iommu_probe,
-	.remove	= mtk_iommu_remove,
 	.driver	= {
 		.name = "mtk-iommu",
 		.of_match_table = of_match_ptr(mtk_iommu_of_ids),
 		.pm = &mtk_iommu_pm_ops,
 	}
 };
-
-static int __init mtk_iommu_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&mtk_iommu_driver);
-	if (ret != 0)
-		pr_err("Failed to register MTK IOMMU driver\n");
-
-	return ret;
-}
-
-subsys_initcall(mtk_iommu_init)
+builtin_platform_driver(mtk_iommu_driver);
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 845e20b..1c0fb82 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -650,22 +650,6 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 	return component_master_add_with_match(dev, &mtk_iommu_com_ops, match);
 }
 
-static int mtk_iommu_remove(struct platform_device *pdev)
-{
-	struct mtk_iommu_data *data = platform_get_drvdata(pdev);
-
-	iommu_device_sysfs_remove(&data->iommu);
-	iommu_device_unregister(&data->iommu);
-
-	if (iommu_present(&platform_bus_type))
-		bus_set_iommu(&platform_bus_type, NULL);
-
-	clk_disable_unprepare(data->bclk);
-	devm_free_irq(&pdev->dev, data->irq, data);
-	component_master_del(&pdev->dev, &mtk_iommu_com_ops);
-	return 0;
-}
-
 static int __maybe_unused mtk_iommu_suspend(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
@@ -702,16 +686,10 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 
 static struct platform_driver mtk_iommu_driver = {
 	.probe	= mtk_iommu_probe,
-	.remove	= mtk_iommu_remove,
 	.driver	= {
 		.name = "mtk-iommu-v1",
 		.of_match_table = mtk_iommu_of_ids,
 		.pm = &mtk_iommu_pm_ops,
 	}
 };
-
-static int __init m4u_init(void)
-{
-	return platform_driver_register(&mtk_iommu_driver);
-}
-subsys_initcall(m4u_init);
+builtin_platform_driver(mtk_iommu_driver);
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 11/12] arm: dts: mediatek: Get rid of mediatek, larb for MM nodes

[Yong Wu]

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 arch/arm/boot/dts/mt2701.dtsi | 1 -
 arch/arm/boot/dts/mt7623.dtsi | 1 -
 2 files changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 51e1305..57b5de3 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -564,7 +564,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index a79f0b6..cf22c58 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -783,7 +783,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH v2 12/12] arm64: dts: mediatek: Get rid of mediatek, larb for MM nodes

[Yong Wu]

After adding device_link between the IOMMU consumer and smi,
the mediatek,larb is unnecessary now.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 15f1842..06e2c09 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -921,7 +921,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-			mediatek,larb = <&larb0>;
 			mediatek,vpu = <&vpu>;
 		};
 
@@ -932,7 +931,6 @@
 				 <&mmsys CLK_MM_MUTEX_32K>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		mdp_rsz0: rsz@14003000 {
@@ -962,7 +960,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WDMA>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WDMA>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot0: wrot@14007000 {
@@ -971,7 +968,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT0>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		mdp_wrot1: wrot@14008000 {
@@ -980,7 +976,6 @@
 			clocks = <&mmsys CLK_MM_MDP_WROT1>;
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			iommus = <&iommu M4U_PORT_MDP_WROT1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		ovl0: ovl@1400c000 {
@@ -990,7 +985,6 @@
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		ovl1: ovl@1400d000 {
@@ -1000,7 +994,6 @@
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_OVL1>;
 			iommus = <&iommu M4U_PORT_DISP_OVL1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		rdma0: rdma@1400e000 {
@@ -1010,7 +1003,6 @@
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		rdma1: rdma@1400f000 {
@@ -1020,7 +1012,6 @@
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		rdma2: rdma@14010000 {
@@ -1030,7 +1021,6 @@
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
 			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-			mediatek,larb = <&larb4>;
 		};
 
 		wdma0: wdma@14011000 {
@@ -1040,7 +1030,6 @@
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-			mediatek,larb = <&larb0>;
 		};
 
 		wdma1: wdma@14012000 {
@@ -1050,7 +1039,6 @@
 			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
 			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-			mediatek,larb = <&larb4>;
 		};
 
 		color0: color@14013000 {
@@ -1294,7 +1282,6 @@
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb1>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -1364,8 +1351,6 @@
 			      <0 0x19002000 0 0x1000>;	/* VENC_LT_SYS */
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
 				     <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
-			mediatek,larb = <&larb3>,
-					<&larb5>;
 			iommus = <&iommu M4U_PORT_VENC_RCPU>,
 				 <&iommu M4U_PORT_VENC_REC>,
 				 <&iommu M4U_PORT_VENC_BSDMA>,
-- 
1.9.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put

[CK Hu]

Hi, Yong:

On Mon, 2019-06-10 at 20:55 +0800, Yong Wu wrote:
> MediaTek IOMMU has already added the device_link between the consumer
> and smi-larb device. If the drm device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.
> 
> CC: CK Hu <ck.hu@mediatek.com>
> CC: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Reviewed-by: Evan Green <evgreen@chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 11 -----------
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 26 --------------------------
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  1 -
>  3 files changed, 38 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index acad088..3a21a48 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -18,7 +18,6 @@
>  #include <drm/drm_probe_helper.h>
>  #include <linux/clk.h>
>  #include <linux/pm_runtime.h>
> -#include <soc/mediatek/smi.h>
>  
>  #include "mtk_drm_drv.h"
>  #include "mtk_drm_crtc.h"
> @@ -371,20 +370,12 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
>  				       struct drm_crtc_state *old_state)
>  {
>  	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
> -	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
>  	int ret;
>  
>  	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
>  
> -	ret = mtk_smi_larb_get(comp->larb_dev);
> -	if (ret) {
> -		DRM_ERROR("Failed to get larb: %d\n", ret);
> -		return;
> -	}
> -
>  	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
>  	if (ret) {
> -		mtk_smi_larb_put(comp->larb_dev);
>  		return;
>  	}

Remove {}.

Regards,
CK

>  
> @@ -396,7 +387,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
>  					struct drm_crtc_state *old_state)
>  {
>  	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
> -	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
>  	int i;
>  
>  	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
> @@ -419,7 +409,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
>  
>  	drm_crtc_vblank_off(crtc);
>  	mtk_crtc_ddp_hw_fini(mtk_crtc);
> -	mtk_smi_larb_put(comp->larb_dev);
>  
>  	mtk_crtc->enabled = false;
>  }
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 54ca794..ede15c9 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -265,8 +265,6 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  		      const struct mtk_ddp_comp_funcs *funcs)
>  {
>  	enum mtk_ddp_comp_type type;
> -	struct device_node *larb_node;
> -	struct platform_device *larb_pdev;
>  
>  	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
>  		return -EINVAL;
> @@ -296,30 +294,6 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
>  	if (IS_ERR(comp->clk))
>  		return PTR_ERR(comp->clk);
>  
> -	/* Only DMA capable components need the LARB property */
> -	comp->larb_dev = NULL;
> -	if (type != MTK_DISP_OVL &&
> -	    type != MTK_DISP_RDMA &&
> -	    type != MTK_DISP_WDMA)
> -		return 0;
> -
> -	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
> -	if (!larb_node) {
> -		dev_err(dev,
> -			"Missing mediadek,larb phandle in %pOF node\n", node);
> -		return -EINVAL;
> -	}
> -
> -	larb_pdev = of_find_device_by_node(larb_node);
> -	if (!larb_pdev) {
> -		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
> -		of_node_put(larb_node);
> -		return -EPROBE_DEFER;
> -	}
> -	of_node_put(larb_node);
> -
> -	comp->larb_dev = &larb_pdev->dev;
> -
>  	return 0;
>  }
>  
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index 8399229..b8dc17e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -91,7 +91,6 @@ struct mtk_ddp_comp {
>  	struct clk *clk;
>  	void __iomem *regs;
>  	int irq;
> -	struct device *larb_dev;
>  	enum mtk_ddp_comp_id id;
>  	const struct mtk_ddp_comp_funcs *funcs;
>  };


_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 08/12] drm/mediatek: Get rid of mtk_smi_larb_get/put

[Yong Wu]

On Tue, 2019-06-18 at 14:35 +0800, CK Hu wrote:
> Hi, Yong:
> 
> On Mon, 2019-06-10 at 20:55 +0800, Yong Wu wrote:
> > MediaTek IOMMU has already added the device_link between the consumer
> > and smi-larb device. If the drm device call the pm_runtime_get_sync,
> > the smi-larb's pm_runtime_get_sync also be called automatically.
> > 
> > CC: CK Hu <ck.hu@mediatek.com>
> > CC: Philipp Zabel <p.zabel@pengutronix.de>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Reviewed-by: Evan Green <evgreen@chromium.org>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_crtc.c     | 11 -----------
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 26 --------------------------
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |  1 -
> >  3 files changed, 38 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > index acad088..3a21a48 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > @@ -18,7 +18,6 @@
> >  #include <drm/drm_probe_helper.h>
> >  #include <linux/clk.h>
> >  #include <linux/pm_runtime.h>
> > -#include <soc/mediatek/smi.h>
> >  
> >  #include "mtk_drm_drv.h"
> >  #include "mtk_drm_crtc.h"
> > @@ -371,20 +370,12 @@ static void mtk_drm_crtc_atomic_enable(struct drm_crtc *crtc,
> >  				       struct drm_crtc_state *old_state)
> >  {
> >  	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
> > -	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
> >  	int ret;
> >  
> >  	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
> >  
> > -	ret = mtk_smi_larb_get(comp->larb_dev);
> > -	if (ret) {
> > -		DRM_ERROR("Failed to get larb: %d\n", ret);
> > -		return;
> > -	}
> > -
> >  	ret = mtk_crtc_ddp_hw_init(mtk_crtc);
> >  	if (ret) {
> > -		mtk_smi_larb_put(comp->larb_dev);
> >  		return;
> >  	}
> 
> Remove {}.

Thanks. I will fix in next version.

> 
> Regards,
> CK
> 
> >  
> > @@ -396,7 +387,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
> >  					struct drm_crtc_state *old_state)
> >  {
> >  	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
> > -	struct mtk_ddp_comp *comp = mtk_crtc->ddp_comp[0];
> >  	int i;
> >  
> >  	DRM_DEBUG_DRIVER("%s %d\n", __func__, crtc->base.id);
> > @@ -419,7 +409,6 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
> >  
> >  	drm_crtc_vblank_off(crtc);
> >  	mtk_crtc_ddp_hw_fini(mtk_crtc);
> > -	mtk_smi_larb_put(comp->larb_dev);
> >  
> >  	mtk_crtc->enabled = false;
> >  }
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > index 54ca794..ede15c9 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > @@ -265,8 +265,6 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
> >  		      const struct mtk_ddp_comp_funcs *funcs)
> >  {
> >  	enum mtk_ddp_comp_type type;
> > -	struct device_node *larb_node;
> > -	struct platform_device *larb_pdev;
> >  
> >  	if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
> >  		return -EINVAL;
> > @@ -296,30 +294,6 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
> >  	if (IS_ERR(comp->clk))
> >  		return PTR_ERR(comp->clk);
> >  
> > -	/* Only DMA capable components need the LARB property */
> > -	comp->larb_dev = NULL;
> > -	if (type != MTK_DISP_OVL &&
> > -	    type != MTK_DISP_RDMA &&
> > -	    type != MTK_DISP_WDMA)
> > -		return 0;
> > -
> > -	larb_node = of_parse_phandle(node, "mediatek,larb", 0);
> > -	if (!larb_node) {
> > -		dev_err(dev,
> > -			"Missing mediadek,larb phandle in %pOF node\n", node);
> > -		return -EINVAL;
> > -	}
> > -
> > -	larb_pdev = of_find_device_by_node(larb_node);
> > -	if (!larb_pdev) {
> > -		dev_warn(dev, "Waiting for larb device %pOF\n", larb_node);
> > -		of_node_put(larb_node);
> > -		return -EPROBE_DEFER;
> > -	}
> > -	of_node_put(larb_node);
> > -
> > -	comp->larb_dev = &larb_pdev->dev;
> > -
> >  	return 0;
> >  }
> >  
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > index 8399229..b8dc17e 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > @@ -91,7 +91,6 @@ struct mtk_ddp_comp {
> >  	struct clk *clk;
> >  	void __iomem *regs;
> >  	int irq;
> > -	struct device *larb_dev;
> >  	enum mtk_ddp_comp_id id;
> >  	const struct mtk_ddp_comp_funcs *funcs;
> >  };
> 
> 


_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 02/12] iommu/mediatek: Add probe_defer for smi-larb

[Matthias Brugger]

On 10/06/2019 14:55, Yong Wu wrote:
> The iommu consumer should use device_link to connect with the
> smi-larb(supplier). then the smi-larb should run before the iommu
> consumer. Here we delay the iommu driver until the smi driver is
> ready, then all the iommu consumer always is after the smi driver.
> 
> When there is no this patch, if some consumer drivers run before
> smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> device_link_add, then device_links_driver_bound will use WARN_ON
> to complain that the link_status of supplier is not right.
> 
> This is a preparing patch for adding device_link.
> 
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/iommu/mtk_iommu.c    | 2 +-
>  drivers/iommu/mtk_iommu_v1.c | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 6fe3369..f7599d8 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -664,7 +664,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>  			id = i;
>  
>  		plarbdev = of_find_device_by_node(larbnode);
> -		if (!plarbdev) {
> +		if (!plarbdev || !plarbdev->dev.driver) {

can't we use:
device_lock()
device_is_bound(struct device *dev)
device_unlock()

>  			of_node_put(larbnode);
>  			return -EPROBE_DEFER;
>  		}
> diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> index 0b0908c..c43c4a0 100644
> --- a/drivers/iommu/mtk_iommu_v1.c
> +++ b/drivers/iommu/mtk_iommu_v1.c
> @@ -604,7 +604,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>  			plarbdev = of_platform_device_create(
>  						larb_spec.np, NULL,
>  						platform_bus_type.dev_root);
> -			if (!plarbdev) {
> +			if (!plarbdev || !plarbdev->dev.driver) {
>  				of_node_put(larb_spec.np);
>  				return -EPROBE_DEFER;
>  			}
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put

[Matthias Brugger]

On 10/06/2019 14:55, Yong Wu wrote:
> MediaTek IOMMU has already added device_link between the consumer
> and smi-larb device. If the jpg device call the pm_runtime_get_sync,
> the smi-larb's pm_runtime_get_sync also be called automatically.

Please help me out find this relation. I seem to miss something basic, because I
can't find any between the jpeg IP and the iommu.

Regards,
Matthias

> 
> CC: Rick Chang <rick.chang@mediatek.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> Reviewed-by: Evan Green <evgreen@chromium.org>
> ---
>  drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 22 ----------------------
>  drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h |  2 --
>  2 files changed, 24 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> index f761e4d..2f37538 100644
> --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> @@ -29,7 +29,6 @@
>  #include <media/v4l2-ioctl.h>
>  #include <media/videobuf2-core.h>
>  #include <media/videobuf2-dma-contig.h>
> -#include <soc/mediatek/smi.h>
>  
>  #include "mtk_jpeg_hw.h"
>  #include "mtk_jpeg_core.h"
> @@ -901,11 +900,6 @@ static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq,
>  
>  static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
>  {
> -	int ret;
> -
> -	ret = mtk_smi_larb_get(jpeg->larb);
> -	if (ret)
> -		dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
>  	clk_prepare_enable(jpeg->clk_jdec_smi);
>  	clk_prepare_enable(jpeg->clk_jdec);
>  }
> @@ -914,7 +908,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
>  {
>  	clk_disable_unprepare(jpeg->clk_jdec);
>  	clk_disable_unprepare(jpeg->clk_jdec_smi);
> -	mtk_smi_larb_put(jpeg->larb);
>  }
>  
>  static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
> @@ -1059,21 +1052,6 @@ static int mtk_jpeg_release(struct file *file)
>  
>  static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
>  {
> -	struct device_node *node;
> -	struct platform_device *pdev;
> -
> -	node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
> -	if (!node)
> -		return -EINVAL;
> -	pdev = of_find_device_by_node(node);
> -	if (WARN_ON(!pdev)) {
> -		of_node_put(node);
> -		return -EINVAL;
> -	}
> -	of_node_put(node);
> -
> -	jpeg->larb = &pdev->dev;
> -
>  	jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec");
>  	if (IS_ERR(jpeg->clk_jdec))
>  		return PTR_ERR(jpeg->clk_jdec);
> diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> index 1a6cdfd..e35fb79 100644
> --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> @@ -55,7 +55,6 @@ enum mtk_jpeg_ctx_state {
>   * @dec_reg_base:	JPEG registers mapping
>   * @clk_jdec:		JPEG hw working clock
>   * @clk_jdec_smi:	JPEG SMI bus clock
> - * @larb:		SMI device
>   */
>  struct mtk_jpeg_dev {
>  	struct mutex		lock;
> @@ -69,7 +68,6 @@ struct mtk_jpeg_dev {
>  	void __iomem		*dec_reg_base;
>  	struct clk		*clk_jdec;
>  	struct clk		*clk_jdec_smi;
> -	struct device		*larb;
>  };
>  
>  /**
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 05/12] media: mtk-jpeg: Get rid of mtk_smi_larb_get/put

[Yong Wu]

On Thu, 2019-06-20 at 17:20 +0200, Matthias Brugger wrote:
> 
> On 10/06/2019 14:55, Yong Wu wrote:
> > MediaTek IOMMU has already added device_link between the consumer
> > and smi-larb device. If the jpg device call the pm_runtime_get_sync,
> > the smi-larb's pm_runtime_get_sync also be called automatically.
> 
> Please help me out find this relation. I seem to miss something basic, because I
> can't find any between the jpeg IP and the iommu.

JPEG also is a multimedia consumer. It also access memory via IOMMU. All
the current SoC have the JPG smi ports. 

grep -r JPG include/dt-bindings/memory/mt*

> 
> Regards,
> Matthias
> 
> > 
> > CC: Rick Chang <rick.chang@mediatek.com>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > Reviewed-by: Evan Green <evgreen@chromium.org>
> > ---
> >  drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 22 ----------------------
> >  drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h |  2 --
> >  2 files changed, 24 deletions(-)
> > 
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > index f761e4d..2f37538 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > @@ -29,7 +29,6 @@
> >  #include <media/v4l2-ioctl.h>
> >  #include <media/videobuf2-core.h>
> >  #include <media/videobuf2-dma-contig.h>
> > -#include <soc/mediatek/smi.h>
> >  
> >  #include "mtk_jpeg_hw.h"
> >  #include "mtk_jpeg_core.h"
> > @@ -901,11 +900,6 @@ static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq,
> >  
> >  static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
> >  {
> > -	int ret;
> > -
> > -	ret = mtk_smi_larb_get(jpeg->larb);
> > -	if (ret)
> > -		dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
> >  	clk_prepare_enable(jpeg->clk_jdec_smi);
> >  	clk_prepare_enable(jpeg->clk_jdec);
> >  }
> > @@ -914,7 +908,6 @@ static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
> >  {
> >  	clk_disable_unprepare(jpeg->clk_jdec);
> >  	clk_disable_unprepare(jpeg->clk_jdec_smi);
> > -	mtk_smi_larb_put(jpeg->larb);
> >  }
> >  
> >  static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
> > @@ -1059,21 +1052,6 @@ static int mtk_jpeg_release(struct file *file)
> >  
> >  static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
> >  {
> > -	struct device_node *node;
> > -	struct platform_device *pdev;
> > -
> > -	node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
> > -	if (!node)
> > -		return -EINVAL;
> > -	pdev = of_find_device_by_node(node);
> > -	if (WARN_ON(!pdev)) {
> > -		of_node_put(node);
> > -		return -EINVAL;
> > -	}
> > -	of_node_put(node);
> > -
> > -	jpeg->larb = &pdev->dev;
> > -
> >  	jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec");
> >  	if (IS_ERR(jpeg->clk_jdec))
> >  		return PTR_ERR(jpeg->clk_jdec);
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > index 1a6cdfd..e35fb79 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > @@ -55,7 +55,6 @@ enum mtk_jpeg_ctx_state {
> >   * @dec_reg_base:	JPEG registers mapping
> >   * @clk_jdec:		JPEG hw working clock
> >   * @clk_jdec_smi:	JPEG SMI bus clock
> > - * @larb:		SMI device
> >   */
> >  struct mtk_jpeg_dev {
> >  	struct mutex		lock;
> > @@ -69,7 +68,6 @@ struct mtk_jpeg_dev {
> >  	void __iomem		*dec_reg_base;
> >  	struct clk		*clk_jdec;
> >  	struct clk		*clk_jdec_smi;
> > -	struct device		*larb;
> >  };
> >  
> >  /**
> > 


_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 02/12] iommu/mediatek: Add probe_defer for smi-larb

[Yong Wu]

On Wed, 2019-06-19 at 15:52 +0200, Matthias Brugger wrote:
> 
> On 10/06/2019 14:55, Yong Wu wrote:
> > The iommu consumer should use device_link to connect with the
> > smi-larb(supplier). then the smi-larb should run before the iommu
> > consumer. Here we delay the iommu driver until the smi driver is
> > ready, then all the iommu consumer always is after the smi driver.
> > 
> > When there is no this patch, if some consumer drivers run before
> > smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the
> > device_link_add, then device_links_driver_bound will use WARN_ON
> > to complain that the link_status of supplier is not right.
> > 
> > This is a preparing patch for adding device_link.
> > 
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  drivers/iommu/mtk_iommu.c    | 2 +-
> >  drivers/iommu/mtk_iommu_v1.c | 2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 6fe3369..f7599d8 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -664,7 +664,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> >  			id = i;
> >  
> >  		plarbdev = of_find_device_by_node(larbnode);
> > -		if (!plarbdev) {
> > +		if (!plarbdev || !plarbdev->dev.driver) {
> 
> can't we use:
> device_lock()
> device_is_bound(struct device *dev)
> device_unlock()

A new API for me. Thanks the hint. I have tried. it is ok.


> 
> >  			of_node_put(larbnode);
> >  			return -EPROBE_DEFER;
> >  		}
> > diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> > index 0b0908c..c43c4a0 100644
> > --- a/drivers/iommu/mtk_iommu_v1.c
> > +++ b/drivers/iommu/mtk_iommu_v1.c
> > @@ -604,7 +604,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> >  			plarbdev = of_platform_device_create(
> >  						larb_spec.np, NULL,
> >  						platform_bus_type.dev_root);
> > -			if (!plarbdev) {
> > +			if (!plarbdev || !plarbdev->dev.driver) {
> >  				of_node_put(larb_spec.np);
> >  				return -EPROBE_DEFER;
> >  			}
> > 



_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 00/12] Clean up "mediatek,larb" after adding device_link

[CK Hu]

Hi, Yong:

I've added log  in mtk_smi_clk_enable() and mtk_smi_clk_disable(), and I
boot MT8183 with display, the log is

[    4.020340] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[    4.331371] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
[    4.429578] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[    4.719743] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
[    5.084770] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
[    5.904310] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()

From the log, the clock is finally turned off, but the display works
normally. This is because scpsys has turn the clock on,

		scpsys: syscon@10006000 {
			compatible = "mediatek,mt8183-scpsys", "syscon";
			#power-domain-cells = <1>;
			reg = <0 0x10006000 0 0x1000>;
			clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
				 <&mmsys CLK_MM_SMI_COMMON>,
				 <&mmsys CLK_MM_GALS_COMM0>,
				 <&mmsys CLK_MM_GALS_COMM1>,
			clock-names = "audio","mm-0",
				      "mm-1", "mm-2";
		}

I'm worried that for MT8173, scpsys would not turn on subsys clock, this
series would let display work abnormally, so I think smi common should
not depend on scpsys to turn on the clock.

You could simply remove the clock parameter in scpsys device node, and
you would see the display works abnormally.

Regards,
CK


On Mon, 2019-06-10 at 20:55 +0800, Yong Wu wrote:
> MediaTek IOMMU block diagram always like below:
> 
>         M4U
>          |
>     smi-common
>          |
>   -------------
>   |         |  ...
>   |         |
> larb1     larb2
>   |         |
> vdec       venc
> 
> All the consumer connect with smi-larb, then connect with smi-common.
> 
> MediaTek IOMMU don't have its power-domain. When the consumer works,
> it should enable the smi-larb's power which also need enable the smi-common's
> power firstly.
> 
> Thus, Firstly, use the device link connect the consumer and the
> smi-larbs. then add device link between the smi-larb and smi-common.
> 
> After adding the device_link, then "mediatek,larb" property can be removed.
> the iommu consumer don't need call the mtk_smi_larb_get/put to enable
> the power and clock of smi-larb and smi-common.
> 
> This patchset depends on "MT8183 IOMMU SUPPORT"[1].
> 
> [1] https://lists.linuxfoundation.org/pipermail/iommu/2019-June/036552.html
> 
> Change notes:
> v2:
>    1) rebase on v5.2-rc1.
>    2) Move adding device_link between the consumer and smi-larb into
> iommu_add_device from Robin.
>    3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
>    4) Remove the shutdown callback in iommu.   
> 
> v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html
> 
> Yong Wu (12):
>   dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
>   iommu/mediatek: Add probe_defer for smi-larb
>   iommu/mediatek: Add device_link between the consumer and the larb
>     devices
>   memory: mtk-smi: Add device-link between smi-larb and smi-common
>   media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
>   media: mtk-mdp: Get rid of mtk_smi_larb_get/put
>   media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
>   drm/mediatek: Get rid of mtk_smi_larb_get/put
>   memory: mtk-smi: Get rid of mtk_smi_larb_get/put
>   iommu/mediatek: Use builtin_platform_driver
>   arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
>   arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
> 
>  .../bindings/display/mediatek/mediatek,disp.txt    |  9 -----
>  .../bindings/media/mediatek-jpeg-decoder.txt       |  4 --
>  .../devicetree/bindings/media/mediatek-mdp.txt     |  8 ----
>  .../devicetree/bindings/media/mediatek-vcodec.txt  |  4 --
>  arch/arm/boot/dts/mt2701.dtsi                      |  1 -
>  arch/arm/boot/dts/mt7623.dtsi                      |  1 -
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi           | 15 -------
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c            | 11 -----
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        | 26 ------------
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  1 -
>  drivers/iommu/mtk_iommu.c                          | 45 +++++++--------------
>  drivers/iommu/mtk_iommu_v1.c                       | 39 +++++++-----------
>  drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    | 22 ----------
>  drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h    |  2 -
>  drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      | 38 -----------------
>  drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |  2 -
>  drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  1 -
>  .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 21 ----------
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
>  .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ----------------------
>  drivers/memory/mtk-smi.c                           | 31 ++++----------
>  include/soc/mediatek/smi.h                         | 20 ---------
>  23 files changed, 36 insertions(+), 316 deletions(-)
> 


_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCH v2 00/12] Clean up "mediatek,larb" after adding device_link

[Yong Wu]

On Tue, 2019-07-23 at 10:31 +0800, CK Hu wrote:
> Hi, Yong:
> 
> I've added log  in mtk_smi_clk_enable() and mtk_smi_clk_disable(), and I
> boot MT8183 with display, the log is
> 
> [    4.020340] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
> [    4.331371] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
> [    4.429578] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
> [    4.719743] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
> [    5.084770] mtk-smi-common 14019000.smi: mtk_smi_clk_enable()
> [    5.904310] mtk-smi-common 14019000.smi: mtk_smi_clk_disable()
> 
> From the log, the clock is finally turned off, but the display works
> normally. This is because scpsys has turn the clock on,
> 
> 		scpsys: syscon@10006000 {
> 			compatible = "mediatek,mt8183-scpsys", "syscon";
> 			#power-domain-cells = <1>;
> 			reg = <0 0x10006000 0 0x1000>;
> 			clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
> 				 <&mmsys CLK_MM_SMI_COMMON>,
> 				 <&mmsys CLK_MM_GALS_COMM0>,
> 				 <&mmsys CLK_MM_GALS_COMM1>,
> 			clock-names = "audio","mm-0",
> 				      "mm-1", "mm-2";
> 		}
> 
> I'm worried that for MT8173, scpsys would not turn on subsys clock, this
> series would let display work abnormally, so I think smi common should
> not depend on scpsys to turn on the clock.
> 
> You could simply remove the clock parameter in scpsys device node, and
> you would see the display works abnormally.

Thanks for the report. I have reproduced this issue by removing the smi
clock in scpsys node.

Now the probe sequence is like this:
a) mtk scpsys (genpd) probe
b) smi probe
c) iommu probe
d) display and the other MM probe.

The log above are called from device_link_add and rpm_idle which is
called between iommu-probe and display-probe.

At the beginning, all the clocks are enabled. But after this
mtk_smi_clk_enable and mtk_smi_clk_disable, the display clock will be
turned off. If the fastlogo is displayed before kernel, then the display
HW will work abnormally.

I have no mt8173 evb board now, I remembered that the screen only is
showed in display driver of kernel in mt8173, It may be ok in that case.
But It really is a problem when the fastlogo is showed before kernel.

This clock issue happened before display driver, It looks display driver
can not help this. I will try to fix it in SMI(smi try to help
display(larb0) to pm_runtime_get_sync one time and put later).


> 
> Regards,
> CK
> 
> 
> On Mon, 2019-06-10 at 20:55 +0800, Yong Wu wrote:
> > MediaTek IOMMU block diagram always like below:
> > 
> >         M4U
> >          |
> >     smi-common
> >          |
> >   -------------
> >   |         |  ...
> >   |         |
> > larb1     larb2
> >   |         |
> > vdec       venc
> > 
> > All the consumer connect with smi-larb, then connect with smi-common.
> > 
> > MediaTek IOMMU don't have its power-domain. When the consumer works,
> > it should enable the smi-larb's power which also need enable the smi-common's
> > power firstly.
> > 
> > Thus, Firstly, use the device link connect the consumer and the
> > smi-larbs. then add device link between the smi-larb and smi-common.
> > 
> > After adding the device_link, then "mediatek,larb" property can be removed.
> > the iommu consumer don't need call the mtk_smi_larb_get/put to enable
> > the power and clock of smi-larb and smi-common.
> > 
> > This patchset depends on "MT8183 IOMMU SUPPORT"[1].
> > 
> > [1] https://lists.linuxfoundation.org/pipermail/iommu/2019-June/036552.html
> > 
> > Change notes:
> > v2:
> >    1) rebase on v5.2-rc1.
> >    2) Move adding device_link between the consumer and smi-larb into
> > iommu_add_device from Robin.
> >    3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
> >    4) Remove the shutdown callback in iommu.   
> > 
> > v1: https://lists.linuxfoundation.org/pipermail/iommu/2019-January/032387.html
> > 
> > Yong Wu (12):
> >   dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
> >   iommu/mediatek: Add probe_defer for smi-larb
> >   iommu/mediatek: Add device_link between the consumer and the larb
> >     devices
> >   memory: mtk-smi: Add device-link between smi-larb and smi-common
> >   media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
> >   media: mtk-mdp: Get rid of mtk_smi_larb_get/put
> >   media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
> >   drm/mediatek: Get rid of mtk_smi_larb_get/put
> >   memory: mtk-smi: Get rid of mtk_smi_larb_get/put
> >   iommu/mediatek: Use builtin_platform_driver
> >   arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
> >   arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes
> > 
> >  .../bindings/display/mediatek/mediatek,disp.txt    |  9 -----
> >  .../bindings/media/mediatek-jpeg-decoder.txt       |  4 --
> >  .../devicetree/bindings/media/mediatek-mdp.txt     |  8 ----
> >  .../devicetree/bindings/media/mediatek-vcodec.txt  |  4 --
> >  arch/arm/boot/dts/mt2701.dtsi                      |  1 -
> >  arch/arm/boot/dts/mt7623.dtsi                      |  1 -
> >  arch/arm64/boot/dts/mediatek/mt8173.dtsi           | 15 -------
> >  drivers/gpu/drm/mediatek/mtk_drm_crtc.c            | 11 -----
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c        | 26 ------------
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h        |  1 -
> >  drivers/iommu/mtk_iommu.c                          | 45 +++++++--------------
> >  drivers/iommu/mtk_iommu_v1.c                       | 39 +++++++-----------
> >  drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c    | 22 ----------
> >  drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h    |  2 -
> >  drivers/media/platform/mtk-mdp/mtk_mdp_comp.c      | 38 -----------------
> >  drivers/media/platform/mtk-mdp/mtk_mdp_comp.h      |  2 -
> >  drivers/media/platform/mtk-mdp/mtk_mdp_core.c      |  1 -
> >  .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  | 21 ----------
> >  drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |  3 --
> >  drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c |  1 -
> >  .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c  | 47 ----------------------
> >  drivers/memory/mtk-smi.c                           | 31 ++++----------
> >  include/soc/mediatek/smi.h                         | 20 ---------
> >  23 files changed, 36 insertions(+), 316 deletions(-)
> > 
> 
> 


_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu