From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
David Woodhouse <dwmw2@infradead.org>,
Alex Williamson <alex.williamson@redhat.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>,
Jean-Philippe Brucker <jean-philippe.brucker@arm.com>,
Jonathan Cameron <jic23@kernel.org>
Subject: [PATCH v5 16/19] iommu/vt-d: Misc macro clean up for SVM
Date: Thu, 15 Aug 2019 13:13:22 -0700 [thread overview]
Message-ID: <1565900005-62508-17-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1565900005-62508-1-git-send-email-jacob.jun.pan@linux.intel.com>
Use combined macros for_each_svm_dev() to simplify SVM device iteration
and error checking.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
---
drivers/iommu/intel-svm.c | 85 +++++++++++++++++++++++------------------------
1 file changed, 41 insertions(+), 44 deletions(-)
diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index 5a688a5..ea6f2e2 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -218,6 +218,10 @@ static const struct mmu_notifier_ops intel_mmuops = {
static DEFINE_MUTEX(pasid_mutex);
static LIST_HEAD(global_svm_list);
+#define for_each_svm_dev(svm, dev) \
+ list_for_each_entry(sdev, &svm->devs, list) \
+ if (dev == sdev->dev) \
+
int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_ops *ops)
{
struct intel_iommu *iommu = intel_svm_device_to_iommu(dev);
@@ -263,15 +267,13 @@ int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_
goto out;
}
- list_for_each_entry(sdev, &svm->devs, list) {
- if (dev == sdev->dev) {
- if (sdev->ops != ops) {
- ret = -EBUSY;
- goto out;
- }
- sdev->users++;
- goto success;
+ for_each_svm_dev(svm, dev) {
+ if (sdev->ops != ops) {
+ ret = -EBUSY;
+ goto out;
}
+ sdev->users++;
+ goto success;
}
break;
@@ -408,48 +410,43 @@ int intel_svm_unbind_mm(struct device *dev, int pasid)
goto out;
svm = ioasid_find(NULL, pasid, NULL);
- if (IS_ERR(svm)) {
+ if (IS_ERR_OR_NULL(svm)) {
ret = PTR_ERR(svm);
goto out;
}
- if (!svm)
- goto out;
+ for_each_svm_dev(svm, dev) {
+ ret = 0;
+ sdev->users--;
+ if (!sdev->users) {
+ list_del_rcu(&sdev->list);
+ /* Flush the PASID cache and IOTLB for this device.
+ * Note that we do depend on the hardware *not* using
+ * the PASID any more. Just as we depend on other
+ * devices never using PASIDs that they have no right
+ * to use. We have a *shared* PASID table, because it's
+ * large and has to be physically contiguous. So it's
+ * hard to be as defensive as we might like. */
+ intel_pasid_tear_down_entry(iommu, dev, svm->pasid);
+ intel_flush_svm_range_dev(svm, sdev, 0, -1, 0, !svm->mm);
+ kfree_rcu(sdev, rcu);
+
+ if (list_empty(&svm->devs)) {
+ ioasid_free(svm->pasid);
+ if (svm->mm)
+ mmu_notifier_unregister(&svm->notifier, svm->mm);
- list_for_each_entry(sdev, &svm->devs, list) {
- if (dev == sdev->dev) {
- ret = 0;
- sdev->users--;
- if (!sdev->users) {
- list_del_rcu(&sdev->list);
- /* Flush the PASID cache and IOTLB for this device.
- * Note that we do depend on the hardware *not* using
- * the PASID any more. Just as we depend on other
- * devices never using PASIDs that they have no right
- * to use. We have a *shared* PASID table, because it's
- * large and has to be physically contiguous. So it's
- * hard to be as defensive as we might like. */
- intel_pasid_tear_down_entry(iommu, dev, svm->pasid);
- intel_flush_svm_range_dev(svm, sdev, 0, -1, 0, !svm->mm);
- kfree_rcu(sdev, rcu);
-
- if (list_empty(&svm->devs)) {
- ioasid_free(svm->pasid);
- if (svm->mm)
- mmu_notifier_unregister(&svm->notifier, svm->mm);
-
- list_del(&svm->list);
-
- /* We mandate that no page faults may be outstanding
- * for the PASID when intel_svm_unbind_mm() is called.
- * If that is not obeyed, subtle errors will happen.
- * Let's make them less subtle... */
- memset(svm, 0x6b, sizeof(*svm));
- kfree(svm);
- }
+ list_del(&svm->list);
+
+ /* We mandate that no page faults may be outstanding
+ * for the PASID when intel_svm_unbind_mm() is called.
+ * If that is not obeyed, subtle errors will happen.
+ * Let's make them less subtle... */
+ memset(svm, 0x6b, sizeof(*svm));
+ kfree(svm);
}
- break;
}
+ break;
}
out:
mutex_unlock(&pasid_mutex);
@@ -585,7 +582,7 @@ static irqreturn_t prq_event_thread(int irq, void *d)
* to unbind the mm while any page faults are outstanding.
* So we only need RCU to protect the internal idr code. */
rcu_read_unlock();
- if (IS_ERR(svm) || !svm) {
+ if (IS_ERR_OR_NULL(svm)) {
pr_err("%s: Page request for invalid PASID %d: %08llx %08llx\n",
iommu->name, req->pasid, ((unsigned long long *)req)[0],
((unsigned long long *)req)[1]);
--
2.7.4
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2019-08-15 20:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-15 20:13 [PATCH v5 00/19] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-08-15 20:13 ` [PATCH v5 01/19] iommu: Add a timeout parameter for PRQ response Jacob Pan
2019-08-15 20:13 ` [PATCH v5 02/19] iommu: handle page response timeout Jacob Pan
2019-08-15 20:13 ` [PATCH v5 03/19] trace/iommu: Add sva trace events Jacob Pan
2019-08-15 20:13 ` [PATCH v5 04/19] iommu: Use device fault trace event Jacob Pan
2019-08-15 20:13 ` [PATCH v5 05/19] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-08-15 20:13 ` [PATCH v5 06/19] iommu: Introduce cache_invalidate API Jacob Pan
2019-08-15 20:13 ` [PATCH v5 07/19] iommu: Add I/O ASID allocator Jacob Pan
2019-08-15 20:13 ` [PATCH v5 08/19] iommu/ioasid: Add custom allocators Jacob Pan
2019-08-15 20:13 ` [PATCH v5 09/19] iommu: Introduce guest PASID bind function Jacob Pan
2019-08-15 20:13 ` [PATCH v5 10/19] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-08-15 20:13 ` [PATCH v5 11/19] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-08-15 20:13 ` [PATCH v5 12/19] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-08-15 20:13 ` [PATCH v5 13/19] iommu/vt-d: Move domain helper to header Jacob Pan
2019-08-15 20:13 ` [PATCH v5 14/19] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-08-15 20:13 ` [PATCH v5 15/19] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-08-15 20:13 ` Jacob Pan [this message]
2019-08-15 21:17 ` [PATCH v5 16/19] iommu/vt-d: Misc macro clean up for SVM Andy Shevchenko
2019-08-15 22:50 ` Jacob Pan
2019-08-15 20:13 ` [PATCH v5 17/19] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-08-15 20:13 ` [PATCH v5 18/19] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-08-15 20:13 ` [PATCH v5 19/19] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-08-26 17:12 ` [PATCH v5 00/19] Shared virtual address IOMMU and VT-d support Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1565900005-62508-17-git-send-email-jacob.jun.pan@linux.intel.com \
--to=jacob.jun.pan@linux.intel.com \
--cc=alex.williamson@redhat.com \
--cc=ashok.raj@intel.com \
--cc=dwmw2@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jean-philippe.brucker@arm.com \
--cc=jic23@kernel.org \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).