From: Jon Derrick <jonathan.derrick@intel.com>
To: <iommu@lists.linux-foundation.org>, <linux-pci@vger.kernel.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>,
Keith Busch <kbusch@kernel.org>,
David Woodhouse <dwmw2@infradead.org>,
Christoph Hellwig <hch@lst.de>,
Jon Derrick <jonathan.derrick@intel.com>
Subject: [PATCH v3 1/5] x86/pci: Add a to_pci_sysdata helper
Date: Fri, 10 Jan 2020 10:21:09 -0700 [thread overview]
Message-ID: <1578676873-6206-2-git-send-email-jonathan.derrick@intel.com> (raw)
In-Reply-To: <1578676873-6206-1-git-send-email-jonathan.derrick@intel.com>
From: Christoph Hellwig <hch@lst.de>
Various helpers need the pci_sysdata just to dereference a single field
in it. Add a little helper that returns the properly typed sysdata
pointer to require a little less boilerplate code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[jonathan.derrick: added un-const cast]
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
---
arch/x86/include/asm/pci.h | 28 +++++++++++++---------------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 90d0731..cf680c5 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -35,12 +35,15 @@ struct pci_sysdata {
#ifdef CONFIG_PCI
+static inline struct pci_sysdata *to_pci_sysdata(struct pci_bus *bus)
+{
+ return bus->sysdata;
+}
+
#ifdef CONFIG_PCI_DOMAINS
static inline int pci_domain_nr(struct pci_bus *bus)
{
- struct pci_sysdata *sd = bus->sysdata;
-
- return sd->domain;
+ return to_pci_sysdata(bus)->domain;
}
static inline int pci_proc_domain(struct pci_bus *bus)
@@ -52,23 +55,20 @@ static inline int pci_proc_domain(struct pci_bus *bus)
#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
{
- struct pci_sysdata *sd = bus->sysdata;
-
- return sd->fwnode;
+ return to_pci_sysdata(bus)->fwnode;
}
#define pci_root_bus_fwnode _pci_root_bus_fwnode
#endif
+#if IS_ENABLED(CONFIG_VMD)
static inline bool is_vmd(struct pci_bus *bus)
{
-#if IS_ENABLED(CONFIG_VMD)
- struct pci_sysdata *sd = bus->sysdata;
-
- return sd->vmd_domain;
+ return to_pci_sysdata(bus)->vmd_domain;
+}
#else
- return false;
-#endif
+#define is_vmd(bus) false
+#endif /* CONFIG_VMD */
}
/* Can be used to override the logic in pci_scan_bus for skipping
@@ -124,9 +124,7 @@ static inline void early_quirks(void) { }
/* Returns the node based on pci bus */
static inline int __pcibus_to_node(const struct pci_bus *bus)
{
- const struct pci_sysdata *sd = bus->sysdata;
-
- return sd->node;
+ return to_pci_sysdata((struct pci_bus *) bus)->node;
}
static inline const struct cpumask *
--
1.8.3.1
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2020-01-10 23:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-10 17:21 [PATCH v3 0/5] Clean up VMD DMA Map Ops Jon Derrick
2020-01-10 17:21 ` Jon Derrick [this message]
2020-01-13 14:40 ` [PATCH v3 1/5] x86/pci: Add a to_pci_sysdata helper Bjorn Helgaas
2020-01-14 8:49 ` Christoph Hellwig
2020-01-10 17:21 ` [PATCH v3 2/5] x86/PCI: Expose VMD's PCI Device in pci_sysdata Jon Derrick
2020-01-14 8:50 ` Christoph Hellwig
2020-01-10 17:21 ` [PATCH v3 3/5] PCI: Introduce pci_direct_dma_alias() Jon Derrick
2020-01-14 8:51 ` Christoph Hellwig
2020-01-10 17:21 ` [PATCH v3 4/5] PCI: vmd: Stop overriding dma_map_ops Jon Derrick
2020-01-14 8:54 ` Christoph Hellwig
2020-01-17 18:17 ` Derrick, Jonathan
2020-01-10 17:21 ` [PATCH v3 5/5] x86/pci: Remove X86_DEV_DMA_OPS Jon Derrick
2020-01-13 12:08 ` [PATCH v3 0/5] Clean up VMD DMA Map Ops Lorenzo Pieralisi
2020-01-13 17:13 ` Derrick, Jonathan
2020-01-13 18:01 ` Bjorn Helgaas
2020-01-13 18:17 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578676873-6206-2-git-send-email-jonathan.derrick@intel.com \
--to=jonathan.derrick@intel.com \
--cc=dwmw2@infradead.org \
--cc=hch@lst.de \
--cc=helgaas@kernel.org \
--cc=iommu@lists.linux-foundation.org \
--cc=kbusch@kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).