iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Joerg Roedel <joro@8bytes.org>,
	Alex Williamson <alex.williamson@redhat.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>, Jonathan Corbet <corbet@lwn.net>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	Christoph Hellwig <hch@infradead.org>,
	David Woodhouse <dwmw2@infradead.org>
Subject: [PATCH v3 3/5] iommu/uapi: Use named union for user data
Date: Tue, 23 Jun 2020 10:03:55 -0700	[thread overview]
Message-ID: <1592931837-58223-4-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1592931837-58223-1-git-send-email-jacob.jun.pan@linux.intel.com>

IOMMU UAPI data size is filled by the user space which must be validated
by ther kernel. To ensure backward compatibility, user data can only be
extended by either re-purpose padding bytes or extend the variable sized
union at the end. No size change is allowed before the union. Therefore,
the minimum size is the offset of the union.

To use offsetof() on the union, we must make it named.

Link: https://lkml.org/lkml/2020/6/11/834
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 drivers/iommu/intel/iommu.c | 24 ++++++++++++------------
 drivers/iommu/intel/svm.c   |  2 +-
 include/uapi/linux/iommu.h  |  4 ++--
 3 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 50fc62413a35..59cba214ef13 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -5409,8 +5409,8 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 
 	/* Size is only valid in address selective invalidation */
 	if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
-		size = to_vtd_size(inv_info->addr_info.granule_size,
-				   inv_info->addr_info.nb_granules);
+		size = to_vtd_size(inv_info->granu.addr_info.granule_size,
+				   inv_info->granu.addr_info.nb_granules);
 
 	for_each_set_bit(cache_type,
 			 (unsigned long *)&inv_info->cache,
@@ -5431,20 +5431,20 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 		 * granularity.
 		 */
 		if (inv_info->granularity == IOMMU_INV_GRANU_PASID &&
-		    (inv_info->pasid_info.flags & IOMMU_INV_PASID_FLAGS_PASID))
-			pasid = inv_info->pasid_info.pasid;
+		    (inv_info->granu.pasid_info.flags & IOMMU_INV_PASID_FLAGS_PASID))
+			pasid = inv_info->granu.pasid_info.pasid;
 		else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR &&
-			 (inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_PASID))
-			pasid = inv_info->addr_info.pasid;
+			 (inv_info->granu.addr_info.flags & IOMMU_INV_ADDR_FLAGS_PASID))
+			pasid = inv_info->granu.addr_info.pasid;
 
 		switch (BIT(cache_type)) {
 		case IOMMU_CACHE_INV_TYPE_IOTLB:
 			/* HW will ignore LSB bits based on address mask */
 			if (inv_info->granularity == IOMMU_INV_GRANU_ADDR &&
 			    size &&
-			    (inv_info->addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1))) {
+				(inv_info->granu.addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1))) {
 				WARN_ONCE(1, "Address out of range, 0x%llx, size order %llu\n",
-					  inv_info->addr_info.addr, size);
+					  inv_info->granu.addr_info.addr, size);
 			}
 
 			/*
@@ -5452,9 +5452,9 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 			 * We use npages = -1 to indicate that.
 			 */
 			qi_flush_piotlb(iommu, did, pasid,
-					mm_to_dma_pfn(inv_info->addr_info.addr),
+					mm_to_dma_pfn(inv_info->granu.addr_info.addr),
 					(granu == QI_GRAN_NONG_PASID) ? -1 : 1 << size,
-					inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
+					inv_info->granu.addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
 
 			if (!info->ats_enabled)
 				break;
@@ -5475,13 +5475,13 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 				size = 64 - VTD_PAGE_SHIFT;
 				addr = 0;
 			} else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
-				addr = inv_info->addr_info.addr;
+				addr = inv_info->granu.addr_info.addr;
 
 			if (info->ats_enabled)
 				qi_flush_dev_iotlb_pasid(iommu, sid,
 						info->pfsid, pasid,
 						info->ats_qdep,
-						inv_info->addr_info.addr,
+						inv_info->granu.addr_info.addr,
 						size);
 			else
 				pr_warn_ratelimited("Passdown device IOTLB flush w/o ATS!\n");
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index d386853121a2..713b3a218483 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -338,7 +338,7 @@ int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev,
 	spin_lock(&iommu->lock);
 	ret = intel_pasid_setup_nested(iommu, dev,
 				       (pgd_t *)(uintptr_t)data->gpgd,
-				       data->hpasid, &data->vtd, dmar_domain,
+				       data->hpasid, &data->vendor.vtd, dmar_domain,
 				       data->addr_width);
 	spin_unlock(&iommu->lock);
 	if (ret) {
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
index 303f148a5cd7..1afc6610b0ad 100644
--- a/include/uapi/linux/iommu.h
+++ b/include/uapi/linux/iommu.h
@@ -263,7 +263,7 @@ struct iommu_cache_invalidate_info {
 	union {
 		struct iommu_inv_pasid_info pasid_info;
 		struct iommu_inv_addr_info addr_info;
-	};
+	} granu;
 };
 
 /**
@@ -329,7 +329,7 @@ struct iommu_gpasid_bind_data {
 	/* Vendor specific data */
 	union {
 		struct iommu_gpasid_bind_data_vtd vtd;
-	};
+	} vendor;
 };
 
 #endif /* _UAPI_IOMMU_H */
-- 
2.7.4

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2020-06-23 16:57 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 17:03 [PATCH v3 0/5] IOMMU user API enhancement Jacob Pan
2020-06-23 17:03 ` [PATCH v3 1/5] docs: IOMMU user API Jacob Pan
2020-06-26 22:19   ` Alex Williamson
2020-06-29 23:05     ` Jacob Pan
2020-06-30  2:52       ` Tian, Kevin
2020-06-30 17:39         ` Jacob Pan
2020-07-07 21:40       ` Alex Williamson
2020-07-08 15:21         ` Jacob Pan
2020-06-23 17:03 ` [PATCH v3 2/5] iommu/uapi: Add argsz for user filled data Jacob Pan
2020-06-23 17:03 ` Jacob Pan [this message]
2020-06-24  6:29   ` [PATCH v3 3/5] iommu/uapi: Use named union for user data Lu Baolu
2020-06-24 15:48     ` Jacob Pan
2020-06-23 17:03 ` [PATCH v3 4/5] iommu/uapi: Handle data and argsz filled by users Jacob Pan
2020-06-24  6:54   ` Lu Baolu
2020-06-24 17:07     ` Jacob Pan
2020-06-25  7:07       ` Lu Baolu
2020-06-23 17:03 ` [PATCH v3 5/5] iommu/uapi: Support both kernel and user unbind guest PASID Jacob Pan
2020-06-24  7:55   ` Lu Baolu
2020-06-25 12:59   ` Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1592931837-58223-4-git-send-email-jacob.jun.pan@linux.intel.com \
    --to=jacob.jun.pan@linux.intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=corbet@lwn.net \
    --cc=dwmw2@infradead.org \
    --cc=hch@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH v3 3/5] iommu/uapi: Use named union for user data' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).