Re: [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779

[chao hao <Chao.Hao@mediatek.com>]

On Sun, 2020-06-21 at 13:01 +0200, Matthias Brugger wrote:
> 
> On 19/06/2020 12:56, chao hao wrote:
> > On Wed, 2020-06-17 at 11:22 +0200, Matthias Brugger wrote:
> >>
> >> On 17/06/2020 05:00, Chao Hao wrote:
> >>> Some platforms(ex: mt6779) have a new register called by REG_MMU_WR_LEN
> >>> to improve performance.
> >>> This patch add this register definition.
> >>
> >> Please be more specific what this register is about.
> >>
> > OK. thanks.
> > We can use "has_wr_len" flag to control whether we need to set the
> > register. If the register uses default value, iommu will send command to
> > EMI without restriction, when the number of commands become more and
> > more, it will drop the EMI performance. So when more than
> > ten_commands(default value) don't be handled for EMI, IOMMU will stop
> > send command to EMI for keeping EMI's performace by enabling write
> > throttling mechanism(bit[5][21]=0) in MMU_WR_LEN_CTRL register.
> > 
> > I will write description above to commit message in next version
> > 
> >>>
> >>> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> >>> ---
> >>>  drivers/iommu/mtk_iommu.c | 10 ++++++++++
> >>>  drivers/iommu/mtk_iommu.h |  2 ++
> >>>  2 files changed, 12 insertions(+)
> >>>
> >>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> >>> index a687e8db0e51..c706bca6487e 100644
> >>> --- a/drivers/iommu/mtk_iommu.c
> >>> +++ b/drivers/iommu/mtk_iommu.c
> >>> @@ -46,6 +46,8 @@
> >>>  #define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> >>>  
> >>>  #define REG_MMU_DCM_DIS				0x050
> >>> +#define REG_MMU_WR_LEN				0x054
> >>> +#define F_MMU_WR_THROT_DIS_BIT			(BIT(5) |  BIT(21))
> >>>  
> >>>  #define REG_MMU_CTRL_REG			0x110
> >>>  #define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
> >>> @@ -581,6 +583,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> >>>  		writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG);
> >>>  	}
> >>>  	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
> >>> +	if (data->plat_data->has_wr_len) {
> >>> +		/* write command throttling mode */
> >>> +		regval = readl_relaxed(data->base + REG_MMU_WR_LEN);
> >>> +		regval &= ~F_MMU_WR_THROT_DIS_BIT;
> >>> +		writel_relaxed(regval, data->base + REG_MMU_WR_LEN);
> >>> +	}
> >>>  
> >>>  	if (data->plat_data->reset_axi) {
> >>>  		/* The register is called STANDARD_AXI_MODE in this case */
> >>> @@ -737,6 +745,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
> >>>  	struct mtk_iommu_suspend_reg *reg = &data->reg;
> >>>  	void __iomem *base = data->base;
> >>>  
> >>> +	reg->wr_len = readl_relaxed(base + REG_MMU_WR_LEN);
> >>
> >> Can we read/write the register without any side effect although hardware has not
> >> implemented it (!has_wr_len)?
> > 
> > It doesn't have side effect. Becasue all the MTK platform have the
> > register for iommu HW. If we need to have requirement for performance,
> > we can set it by has_wr_len.
> > But I'm Sorry, the name of flag(has_wr_len) is not exact, I will rename
> > it in next version, ex: "wr_throt_en"
> > 
> >>
> >>
> >>>  	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
> >>>  	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
> >>>  	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
> >>> @@ -761,6 +770,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> >>>  		dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
> >>>  		return ret;
> >>>  	}
> >>> +	writel_relaxed(reg->wr_len, base + REG_MMU_WR_LEN);
> >>>  	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
> >>>  	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
> >>>  	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
> >>> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> >>> index d51ff99c2c71..9971cedd72ea 100644
> >>> --- a/drivers/iommu/mtk_iommu.h
> >>> +++ b/drivers/iommu/mtk_iommu.h
> >>> @@ -25,6 +25,7 @@ struct mtk_iommu_suspend_reg {
> >>>  	u32				int_main_control;
> >>>  	u32				ivrp_paddr;
> >>>  	u32				vld_pa_rng;
> >>> +	u32				wr_len;
> >>>  };
> >>>  
> >>>  enum mtk_iommu_plat {
> >>> @@ -43,6 +44,7 @@ struct mtk_iommu_plat_data {
> >>>  	bool		    has_misc_ctrl;
> >>>  	bool		    has_sub_comm;
> >>>  	bool                has_vld_pa_rng;
> >>> +	bool                has_wr_len;
> >>
> >> Given the fact that we are adding more and more plat_data bool values, I think
> >> it would make sense to use a u32 flags register and add the appropriate macro
> >> definitions to set and check for a flag present.
> > 
> > Thanks for your advice.
> > do you mean like this:
> > struct plat_flag {
> > 
> >         #define  HAS_4GB_MODE   BIT(0)
> >         #define  HAS_BCLK       BIT(1)
> >         #define  REST_AXI       BIT(2)
> >         ... ...
> > 
> >         u32 flag;
> > };
> > 
> > struct mtk_iommu_plat_data {
> >         ......
> >         struct plat_flag flag;
> >         ......
> > };
> > 
> 
> Nearly, I mean something like this:
> 
> #define  HAS_4GB_MODE   BIT(0)
> #define  HAS_BCLK       BIT(1)
> #define  REST_AXI       BIT(2)
> 
> #define MTK_IOMMU_HAS_FLAG(pdata, _x)	\
> 		((((pdata)->flags) & (_x)) == (_x))
> 
> struct mtk_iommu_plat_data {
> 	...
> 	u32 flags;
> 	...
> }
> 
> if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_BCLK)
> ...
> 

Ok, got it, thanks


> Regards,
> Matthias
> 
> > 
> >> Regards,
> >> Matthias
> >>
> >>>  	bool                reset_axi;
> >>>  	u32                 inv_sel_reg;
> >>>  	unsigned char       larbid_remap[8][4];
> >>>
> > 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu