iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Liu Yi L <yi.l.liu@intel.com>
To: alex.williamson@redhat.com, eric.auger@redhat.com,
	baolu.lu@linux.intel.com, joro@8bytes.org
Cc: jean-philippe@linaro.org, kevin.tian@intel.com,
	ashok.raj@intel.com, kvm@vger.kernel.org, stefanha@gmail.com,
	jun.j.tian@intel.com, iommu@lists.linux-foundation.org,
	linux-kernel@vger.kernel.org, yi.y.sun@intel.com,
	hao.wu@intel.com
Subject: [PATCH v4 08/15] iommu: Pass domain to sva_unbind_gpasid()
Date: Sat,  4 Jul 2020 04:26:22 -0700	[thread overview]
Message-ID: <1593861989-35920-9-git-send-email-yi.l.liu@intel.com> (raw)
In-Reply-To: <1593861989-35920-1-git-send-email-yi.l.liu@intel.com>

From: Yi Sun <yi.y.sun@intel.com>

Current interface is good enough for SVA virtualization on an assigned
physical PCI device, but when it comes to mediated devices, a physical
device may attached with multiple aux-domains. Also, for guest unbind,
the PASID to be unbind should be allocated to the VM. This check requires
to know the ioasid_set which is associated with the domain.

So this interface needs to pass in domain info. Then the iommu driver is
able to know which domain will be used for the 2nd stage translation of
the nesting mode and also be able to do PASID ownership check. This patch
passes @domain per the above reason.

Cc: Kevin Tian <kevin.tian@intel.com>
CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
---
v2 -> v3:
*) pass in domain info only
*) use ioasid_t for pasid instead of int type

v1 -> v2:
*) added in v2.
---
 drivers/iommu/intel/svm.c   | 3 ++-
 drivers/iommu/iommu.c       | 2 +-
 include/linux/intel-iommu.h | 3 ++-
 include/linux/iommu.h       | 3 ++-
 4 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index e995e1a..1e567a1 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -436,7 +436,8 @@ int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev,
 	return ret;
 }
 
-int intel_svm_unbind_gpasid(struct device *dev, int pasid)
+int intel_svm_unbind_gpasid(struct iommu_domain *domain,
+			    struct device *dev, ioasid_t pasid)
 {
 	struct intel_iommu *iommu = intel_svm_device_to_iommu(dev);
 	struct intel_svm_dev *sdev;
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 595527e..5f74837 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -2081,7 +2081,7 @@ int __iommu_sva_unbind_gpasid(struct iommu_domain *domain, struct device *dev,
 	if (unlikely(!domain->ops->sva_unbind_gpasid))
 		return -ENODEV;
 
-	return domain->ops->sva_unbind_gpasid(dev, data->hpasid);
+	return domain->ops->sva_unbind_gpasid(domain, dev, data->hpasid);
 }
 EXPORT_SYMBOL_GPL(__iommu_sva_unbind_gpasid);
 
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index 0d0ab32..18f292e 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -738,7 +738,8 @@ extern int intel_svm_enable_prq(struct intel_iommu *iommu);
 extern int intel_svm_finish_prq(struct intel_iommu *iommu);
 int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev,
 			  struct iommu_gpasid_bind_data *data);
-int intel_svm_unbind_gpasid(struct device *dev, int pasid);
+int intel_svm_unbind_gpasid(struct iommu_domain *domain,
+			    struct device *dev, ioasid_t pasid);
 struct iommu_sva *intel_svm_bind(struct device *dev, struct mm_struct *mm,
 				 void *drvdata);
 void intel_svm_unbind(struct iommu_sva *handle);
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 21d32be..22f0730 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -303,7 +303,8 @@ struct iommu_ops {
 	int (*sva_bind_gpasid)(struct iommu_domain *domain,
 			struct device *dev, struct iommu_gpasid_bind_data *data);
 
-	int (*sva_unbind_gpasid)(struct device *dev, int pasid);
+	int (*sva_unbind_gpasid)(struct iommu_domain *domain,
+				 struct device *dev, ioasid_t pasid);
 
 	int (*def_domain_type)(struct device *dev);
 
-- 
2.7.4

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2020-07-04 11:20 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-04 11:26 [PATCH v4 00/15] vfio: expose virtual Shared Virtual Addressing to VMs Liu Yi L
2020-07-04 11:26 ` [PATCH v4 01/15] vfio/type1: Refactor vfio_iommu_type1_ioctl() Liu Yi L
2020-07-06  9:34   ` Auger Eric
2020-07-06 12:27     ` Liu, Yi L
2020-07-06 12:55       ` Auger Eric
2020-07-06 13:00         ` Liu, Yi L
2020-07-04 11:26 ` [PATCH v4 02/15] iommu: Report domain nesting info Liu Yi L
2020-07-06  9:34   ` Auger Eric
2020-07-06 12:20     ` Liu, Yi L
2020-07-06 13:00       ` Auger Eric
2020-07-06 13:17         ` Liu, Yi L
2020-07-04 11:26 ` [PATCH v4 03/15] iommu/smmu: Report empty " Liu Yi L
2020-07-06 10:37   ` Auger Eric
2020-07-06 12:46     ` Liu, Yi L
2020-07-06 13:21       ` Auger Eric
2020-07-06 13:26         ` Liu, Yi L
2020-07-04 11:26 ` [PATCH v4 04/15] vfio/type1: Report iommu nesting info to userspace Liu Yi L
2020-07-06 10:37   ` Auger Eric
2020-07-06 13:10     ` Liu, Yi L
2020-07-06 13:45       ` Auger Eric
2020-07-07  9:31         ` Liu, Yi L
2020-07-08  8:08           ` Liu, Yi L
2020-07-08 19:29             ` Alex Williamson
2020-07-09  0:25               ` Liu, Yi L
2020-07-06 14:06   ` Auger Eric
2020-07-07  9:34     ` Liu, Yi L
2020-07-04 11:26 ` [PATCH v4 05/15] vfio: Add PASID allocation/free support Liu Yi L
2020-07-06 14:52   ` Auger Eric
2020-07-07  9:45     ` Liu, Yi L
2020-07-04 11:26 ` [PATCH v4 06/15] iommu/vt-d: Support setting ioasid set to domain Liu Yi L
2020-07-06 14:52   ` Auger Eric
2020-07-07  9:37     ` Liu, Yi L
2020-07-04 11:26 ` [PATCH v4 07/15] vfio/type1: Add VFIO_IOMMU_PASID_REQUEST (alloc/free) Liu Yi L
2020-07-06 15:17   ` Auger Eric
2020-07-07  9:51     ` Liu, Yi L
2020-07-04 11:26 ` Liu Yi L [this message]
2020-07-04 11:26 ` [PATCH v4 09/15] iommu/vt-d: Check ownership for PASIDs from user-space Liu Yi L
2020-07-04 11:26 ` [PATCH v4 10/15] vfio/type1: Support binding guest page tables to PASID Liu Yi L
2020-07-04 11:26 ` [PATCH v4 11/15] vfio/type1: Allow invalidating first-level/stage IOMMU cache Liu Yi L
2020-07-04 11:26 ` [PATCH v4 12/15] vfio/type1: Add vSVA support for IOMMU-backed mdevs Liu Yi L
2020-07-04 11:26 ` [PATCH v4 13/15] vfio/pci: Expose PCIe PASID capability to guest Liu Yi L
2020-07-04 11:26 ` [PATCH v4 14/15] vfio: Document dual stage control Liu Yi L
2020-07-04 11:26 ` [PATCH v4 15/15] iommu/vt-d: Support reporting nesting capability info Liu Yi L

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1593861989-35920-9-git-send-email-yi.l.liu@intel.com \
    --to=yi.l.liu@intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=eric.auger@redhat.com \
    --cc=hao.wu@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.org \
    --cc=joro@8bytes.org \
    --cc=jun.j.tian@intel.com \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stefanha@gmail.com \
    --cc=yi.y.sun@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).