iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Jacob Pan <jacob.pan.linux@gmail.com>
To: iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Joerg Roedel <joro@8bytes.org>,
	Alex Williamson <alex.williamson@redhat.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>, Jonathan Corbet <corbet@lwn.net>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	Christoph Hellwig <hch@infradead.org>,
	David Woodhouse <dwmw2@infradead.org>
Subject: [PATCH v8 4/7] iommu/uapi: Use named union for user data
Date: Mon, 31 Aug 2020 11:24:57 -0700	[thread overview]
Message-ID: <1598898300-65475-5-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1598898300-65475-1-git-send-email-jacob.jun.pan@linux.intel.com>

IOMMU UAPI data size is filled by the user space which must be validated
by the kernel. To ensure backward compatibility, user data can only be
extended by either re-purpose padding bytes or extend the variable sized
union at the end. No size change is allowed before the union. Therefore,
the minimum size is the offset of the union.

To use offsetof() on the union, we must make it named.

Link: https://lore.kernel.org/linux-iommu/20200611145518.0c2817d6@x1.home/
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
---
 drivers/iommu/intel/iommu.c | 22 +++++++++++-----------
 drivers/iommu/intel/svm.c   |  2 +-
 include/uapi/linux/iommu.h  |  4 ++--
 3 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index e9864e52b0e9..43f16f0cebde 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -5425,8 +5425,8 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 
 	/* Size is only valid in address selective invalidation */
 	if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
-		size = to_vtd_size(inv_info->addr_info.granule_size,
-				   inv_info->addr_info.nb_granules);
+		size = to_vtd_size(inv_info->granu.addr_info.granule_size,
+				   inv_info->granu.addr_info.nb_granules);
 
 	for_each_set_bit(cache_type,
 			 (unsigned long *)&inv_info->cache,
@@ -5447,20 +5447,20 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 		 * granularity.
 		 */
 		if (inv_info->granularity == IOMMU_INV_GRANU_PASID &&
-		    (inv_info->pasid_info.flags & IOMMU_INV_PASID_FLAGS_PASID))
-			pasid = inv_info->pasid_info.pasid;
+		    (inv_info->granu.pasid_info.flags & IOMMU_INV_PASID_FLAGS_PASID))
+			pasid = inv_info->granu.pasid_info.pasid;
 		else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR &&
-			 (inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_PASID))
-			pasid = inv_info->addr_info.pasid;
+			 (inv_info->granu.addr_info.flags & IOMMU_INV_ADDR_FLAGS_PASID))
+			pasid = inv_info->granu.addr_info.pasid;
 
 		switch (BIT(cache_type)) {
 		case IOMMU_CACHE_INV_TYPE_IOTLB:
 			/* HW will ignore LSB bits based on address mask */
 			if (inv_info->granularity == IOMMU_INV_GRANU_ADDR &&
 			    size &&
-			    (inv_info->addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1))) {
+			    (inv_info->granu.addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1))) {
 				pr_err_ratelimited("User address not aligned, 0x%llx, size order %llu\n",
-						   inv_info->addr_info.addr, size);
+						   inv_info->granu.addr_info.addr, size);
 			}
 
 			/*
@@ -5468,9 +5468,9 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 			 * We use npages = -1 to indicate that.
 			 */
 			qi_flush_piotlb(iommu, did, pasid,
-					mm_to_dma_pfn(inv_info->addr_info.addr),
+					mm_to_dma_pfn(inv_info->granu.addr_info.addr),
 					(granu == QI_GRAN_NONG_PASID) ? -1 : 1 << size,
-					inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
+					inv_info->granu.addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
 
 			if (!info->ats_enabled)
 				break;
@@ -5493,7 +5493,7 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 				size = 64 - VTD_PAGE_SHIFT;
 				addr = 0;
 			} else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR) {
-				addr = inv_info->addr_info.addr;
+				addr = inv_info->granu.addr_info.addr;
 			}
 
 			if (info->ats_enabled)
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 95c3164a2302..99353d6468fa 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -370,7 +370,7 @@ int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev,
 	spin_lock(&iommu->lock);
 	ret = intel_pasid_setup_nested(iommu, dev,
 				       (pgd_t *)(uintptr_t)data->gpgd,
-				       data->hpasid, &data->vtd, dmar_domain,
+				       data->hpasid, &data->vendor.vtd, dmar_domain,
 				       data->addr_width);
 	spin_unlock(&iommu->lock);
 	if (ret) {
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
index 7cc6ee6c41f7..c64bca5af419 100644
--- a/include/uapi/linux/iommu.h
+++ b/include/uapi/linux/iommu.h
@@ -267,7 +267,7 @@ struct iommu_cache_invalidate_info {
 	union {
 		struct iommu_inv_pasid_info pasid_info;
 		struct iommu_inv_addr_info addr_info;
-	};
+	} granu;
 };
 
 /**
@@ -337,7 +337,7 @@ struct iommu_gpasid_bind_data {
 	/* Vendor specific data */
 	union {
 		struct iommu_gpasid_bind_data_vtd vtd;
-	};
+	} vendor;
 };
 
 #endif /* _UAPI_IOMMU_H */
-- 
2.7.4

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2020-08-31 18:18 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-31 18:24 [PATCH v8 0/7] IOMMU user API enhancement Jacob Pan
2020-08-31 18:24 ` [PATCH v8 1/7] docs: IOMMU user API Jacob Pan
2020-08-31 18:24 ` [PATCH v8 2/7] iommu/uapi: Add argsz for user filled data Jacob Pan
2020-08-31 18:24 ` [PATCH v8 3/7] iommu/uapi: Introduce enum type for PASID data format Jacob Pan
2020-08-31 18:24 ` Jacob Pan [this message]
2020-08-31 18:24 ` [PATCH v8 5/7] iommu/uapi: Rename uapi functions Jacob Pan
2020-08-31 18:24 ` [PATCH v8 6/7] iommu/uapi: Handle data and argsz filled by users Jacob Pan
2020-09-03  9:06   ` Auger Eric
2020-09-08 22:59   ` Alex Williamson
2020-08-31 18:25 ` [PATCH v8 7/7] iommu/vt-d: Check UAPI data processed by IOMMU core Jacob Pan
2020-09-01  3:08   ` Lu Baolu
2020-09-03  8:56   ` Auger Eric
2020-09-08 17:33 ` [PATCH v8 0/7] IOMMU user API enhancement Jacob Pan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1598898300-65475-5-git-send-email-jacob.jun.pan@linux.intel.com \
    --to=jacob.pan.linux@gmail.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=corbet@lwn.net \
    --cc=dwmw2@infradead.org \
    --cc=hch@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).