From: Robin Murphy <robin.murphy@arm.com>
To: Christoph Hellwig <hch@lst.de>, Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
iommu@lists.linux-foundation.org
Cc: linux-ia64@vger.kernel.org, linux-doc@vger.kernel.org,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 10/12] dma-direct: rename and cleanup __phys_to_dma
Date: Thu, 10 Sep 2020 14:30:16 +0100 [thread overview]
Message-ID: <17c556b8-2c02-7d03-404b-194cffcbebfb@arm.com> (raw)
In-Reply-To: <20200908164758.3177341-11-hch@lst.de>
On 2020-09-08 17:47, Christoph Hellwig wrote:
> The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try
> to improve the situation by renaming __phys_to_dma to
> phys_to_dma_unencryped, and not forcing architectures that want to
> override phys_to_dma to actually provide __phys_to_dma.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> arch/arm/include/asm/dma-direct.h | 2 +-
> arch/mips/bmips/dma.c | 2 +-
> arch/mips/cavium-octeon/dma-octeon.c | 2 +-
> arch/mips/include/asm/dma-direct.h | 2 +-
> arch/mips/loongson2ef/fuloong-2e/dma.c | 2 +-
> arch/mips/loongson2ef/lemote-2f/dma.c | 2 +-
> arch/mips/loongson64/dma.c | 2 +-
> arch/mips/pci/pci-ar2315.c | 2 +-
> arch/mips/pci/pci-xtalk-bridge.c | 2 +-
> arch/mips/sgi-ip32/ip32-dma.c | 2 +-
> arch/powerpc/include/asm/dma-direct.h | 2 +-
> drivers/iommu/intel/iommu.c | 2 +-
> include/linux/dma-direct.h | 28 +++++++++++++++-----------
> kernel/dma/direct.c | 8 ++++----
> kernel/dma/swiotlb.c | 4 ++--
> 15 files changed, 34 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h
> index a8cee87a93e8ab..bca0de56753439 100644
> --- a/arch/arm/include/asm/dma-direct.h
> +++ b/arch/arm/include/asm/dma-direct.h
> @@ -2,7 +2,7 @@
> #ifndef ASM_ARM_DMA_DIRECT_H
> #define ASM_ARM_DMA_DIRECT_H 1
>
> -static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> unsigned int offset = paddr & ~PAGE_MASK;
> return pfn_to_dma(dev, __phys_to_pfn(paddr)) + offset;
> diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c
> index ba2a5d33dfd3fa..49061b870680b9 100644
> --- a/arch/mips/bmips/dma.c
> +++ b/arch/mips/bmips/dma.c
> @@ -40,7 +40,7 @@ static struct bmips_dma_range *bmips_dma_ranges;
>
> #define FLUSH_RAC 0x100
>
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t pa)
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t pa)
> {
> struct bmips_dma_range *r;
>
> diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
> index 388b13ba2558c2..232fa1017b1ec9 100644
> --- a/arch/mips/cavium-octeon/dma-octeon.c
> +++ b/arch/mips/cavium-octeon/dma-octeon.c
> @@ -168,7 +168,7 @@ void __init octeon_pci_dma_init(void)
> }
> #endif /* CONFIG_PCI */
>
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> #ifdef CONFIG_PCI
> if (dev && dev_is_pci(dev))
> diff --git a/arch/mips/include/asm/dma-direct.h b/arch/mips/include/asm/dma-direct.h
> index 8e178651c638c2..9a640118316c9d 100644
> --- a/arch/mips/include/asm/dma-direct.h
> +++ b/arch/mips/include/asm/dma-direct.h
> @@ -2,7 +2,7 @@
> #ifndef _MIPS_DMA_DIRECT_H
> #define _MIPS_DMA_DIRECT_H 1
>
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
> phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
>
> #endif /* _MIPS_DMA_DIRECT_H */
> diff --git a/arch/mips/loongson2ef/fuloong-2e/dma.c b/arch/mips/loongson2ef/fuloong-2e/dma.c
> index 83fadeb3fd7d56..cea167d8aba8db 100644
> --- a/arch/mips/loongson2ef/fuloong-2e/dma.c
> +++ b/arch/mips/loongson2ef/fuloong-2e/dma.c
> @@ -1,7 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> #include <linux/dma-direct.h>
>
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> return paddr | 0x80000000;
> }
> diff --git a/arch/mips/loongson2ef/lemote-2f/dma.c b/arch/mips/loongson2ef/lemote-2f/dma.c
> index 302b43a14eee74..3c9e994563578c 100644
> --- a/arch/mips/loongson2ef/lemote-2f/dma.c
> +++ b/arch/mips/loongson2ef/lemote-2f/dma.c
> @@ -1,7 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> #include <linux/dma-direct.h>
>
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> return paddr | 0x80000000;
> }
> diff --git a/arch/mips/loongson64/dma.c b/arch/mips/loongson64/dma.c
> index b3dc5d0bd2b113..364f2f27c8723f 100644
> --- a/arch/mips/loongson64/dma.c
> +++ b/arch/mips/loongson64/dma.c
> @@ -4,7 +4,7 @@
> #include <linux/swiotlb.h>
> #include <boot_param.h>
>
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
> * Loongson-3's 48bit address space and embed it into 40bit */
> diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
> index d88395684f487d..cef4a47ab06311 100644
> --- a/arch/mips/pci/pci-ar2315.c
> +++ b/arch/mips/pci/pci-ar2315.c
> @@ -170,7 +170,7 @@ static inline dma_addr_t ar2315_dev_offset(struct device *dev)
> return 0;
> }
>
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> return paddr + ar2315_dev_offset(dev);
> }
> diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
> index f1b37f32b55395..50f7d42cca5a78 100644
> --- a/arch/mips/pci/pci-xtalk-bridge.c
> +++ b/arch/mips/pci/pci-xtalk-bridge.c
> @@ -25,7 +25,7 @@
> /*
> * Common phys<->dma mapping for platforms using pci xtalk bridge
> */
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> struct pci_dev *pdev = to_pci_dev(dev);
> struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
> diff --git a/arch/mips/sgi-ip32/ip32-dma.c b/arch/mips/sgi-ip32/ip32-dma.c
> index 160317294d97a9..20c6da9d76bc5e 100644
> --- a/arch/mips/sgi-ip32/ip32-dma.c
> +++ b/arch/mips/sgi-ip32/ip32-dma.c
> @@ -18,7 +18,7 @@
>
> #define RAM_OFFSET_MASK 0x3fffffffUL
>
> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> dma_addr_t dma_addr = paddr & RAM_OFFSET_MASK;
>
> diff --git a/arch/powerpc/include/asm/dma-direct.h b/arch/powerpc/include/asm/dma-direct.h
> index 95b09313d2a4cf..128304cbee1d87 100644
> --- a/arch/powerpc/include/asm/dma-direct.h
> +++ b/arch/powerpc/include/asm/dma-direct.h
> @@ -2,7 +2,7 @@
> #ifndef ASM_POWERPC_DMA_DIRECT_H
> #define ASM_POWERPC_DMA_DIRECT_H 1
>
> -static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> {
> return paddr + dev->archdata.dma_offset;
> }
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index f8177c59d229a6..7983c13b9eef7d 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -3736,7 +3736,7 @@ bounce_map_single(struct device *dev, phys_addr_t paddr, size_t size,
> */
> if (!IS_ALIGNED(paddr | size, VTD_PAGE_SIZE)) {
> tlb_addr = swiotlb_tbl_map_single(dev,
> - __phys_to_dma(dev, io_tlb_start),
> + phys_to_dma_unencrypted(dev, io_tlb_start),
> paddr, size, aligned_size, dir, attrs);
> if (tlb_addr == DMA_MAPPING_ERROR) {
> goto swiotlb_error;
> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
> index f00e262ab6b154..805010ea5346f9 100644
> --- a/include/linux/dma-direct.h
> +++ b/include/linux/dma-direct.h
> @@ -16,14 +16,29 @@ extern unsigned int zone_dma_bits;
>
> #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA
> #include <asm/dma-direct.h>
> +#ifndef phys_to_dma_unencrypted
> +#define phys_to_dma_unencrypted phys_to_dma
> +#endif
> #else
> -static inline dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> +static inline dma_addr_t phys_to_dma_unencrypted(struct device *dev,
> + phys_addr_t paddr)
> {
> dma_addr_t dev_addr = (dma_addr_t)paddr;
>
> return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT);
> }
>
> +/*
> + * If memory encryption is supported, phys_to_dma will set the memory encryption
> + * bit in the DMA address, and dma_to_phys will clear it.
> + * phys_to_dma_unencrypted is for use on special unencrypted memory like swiotlb
> + * buffers.
> + */
> +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> +{
> + return __sme_set(phys_to_dma_unencrypted(dev, paddr));
> +}
> +
> static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
> {
> phys_addr_t paddr = (phys_addr_t)dev_addr +
> @@ -42,17 +57,6 @@ static inline bool force_dma_unencrypted(struct device *dev)
> }
> #endif /* CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED */
>
> -/*
> - * If memory encryption is supported, phys_to_dma will set the memory encryption
> - * bit in the DMA address, and dma_to_phys will clear it. The raw __phys_to_dma
> - * version should only be used on non-encrypted memory for
> - * special occasions like DMA coherent buffers.
> - */
> -static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
> -{
> - return __sme_set(__phys_to_dma(dev, paddr));
> -}
> -
> static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size,
> bool is_ram)
> {
> diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c
> index bfb479c8a370fa..54db9cfdaecc6d 100644
> --- a/kernel/dma/direct.c
> +++ b/kernel/dma/direct.c
> @@ -25,7 +25,7 @@ static inline dma_addr_t phys_to_dma_direct(struct device *dev,
> phys_addr_t phys)
> {
> if (force_dma_unencrypted(dev))
> - return __phys_to_dma(dev, phys);
> + return phys_to_dma_unencrypted(dev, phys);
> return phys_to_dma(dev, phys);
> }
>
> @@ -438,13 +438,13 @@ int dma_direct_supported(struct device *dev, u64 mask)
> return 1;
>
> /*
> - * This check needs to be against the actual bit mask value, so
> - * use __phys_to_dma() here so that the SME encryption mask isn't
> + * This check needs to be against the actual bit mask value, so use
> + * phys_to_dma_unencrypted() here so that the SME encryption mask isn't
> * part of the check.
> */
> if (IS_ENABLED(CONFIG_ZONE_DMA))
> min_mask = min_t(u64, min_mask, DMA_BIT_MASK(zone_dma_bits));
> - return mask >= __phys_to_dma(dev, min_mask);
> + return mask >= phys_to_dma_unencrypted(dev, min_mask);
> }
>
> size_t dma_direct_max_mapping_size(struct device *dev)
> diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
> index c19379fabd200e..4ea72d145cd27d 100644
> --- a/kernel/dma/swiotlb.c
> +++ b/kernel/dma/swiotlb.c
> @@ -670,13 +670,13 @@ dma_addr_t swiotlb_map(struct device *dev, phys_addr_t paddr, size_t size,
> swiotlb_force);
>
> swiotlb_addr = swiotlb_tbl_map_single(dev,
> - __phys_to_dma(dev, io_tlb_start),
> + phys_to_dma_unencrypted(dev, io_tlb_start),
> paddr, size, size, dir, attrs);
> if (swiotlb_addr == (phys_addr_t)DMA_MAPPING_ERROR)
> return DMA_MAPPING_ERROR;
>
> /* Ensure that the address returned is DMA'ble */
> - dma_addr = __phys_to_dma(dev, swiotlb_addr);
> + dma_addr = phys_to_dma_unencrypted(dev, swiotlb_addr);
> if (unlikely(!dma_capable(dev, dma_addr, size, true))) {
> swiotlb_tbl_unmap_single(dev, swiotlb_addr, size, size, dir,
> attrs | DMA_ATTR_SKIP_CPU_SYNC);
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2020-09-10 13:30 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-08 16:47 dma-mapping cleanups Christoph Hellwig
2020-09-08 16:47 ` [PATCH 01/12] MIPS: make dma_sync_*_for_cpu a little less overzealous Christoph Hellwig
2020-09-08 16:47 ` [PATCH 02/12] MIPS/jazzdma: remove the unused vdma_remap function Christoph Hellwig
2020-09-08 16:47 ` [PATCH 03/12] MIPS/jazzdma: decouple from dma-direct Christoph Hellwig
2020-09-08 16:47 ` [PATCH 04/12] dma-mapping: fix DMA_OPS dependencies Christoph Hellwig
2020-09-08 18:04 ` Sergei Shtylyov
2020-09-11 7:10 ` Christoph Hellwig
2020-09-10 12:55 ` Robin Murphy
2020-09-11 7:09 ` Christoph Hellwig
2020-09-08 16:47 ` [PATCH 05/12] dma-mapping: add (back) arch_dma_mark_clean for ia64 Christoph Hellwig
2020-09-08 16:47 ` [PATCH 06/12] dma-direct: remove dma_direct_{alloc,free}_pages Christoph Hellwig
2020-09-10 12:57 ` Robin Murphy
2020-09-08 16:47 ` [PATCH 07/12] dma-direct: lift gfp_t manipulation out of__dma_direct_alloc_pages Christoph Hellwig
2020-09-10 13:02 ` Robin Murphy
2020-09-08 16:47 ` [PATCH 08/12] dma-direct: use phys_to_dma_direct in dma_direct_alloc Christoph Hellwig
2020-09-10 13:03 ` Robin Murphy
2020-09-08 16:47 ` [PATCH 09/12] dma-direct: remove __dma_to_phys Christoph Hellwig
2020-09-10 13:26 ` Robin Murphy
2020-09-11 7:14 ` Christoph Hellwig
2020-09-08 16:47 ` [PATCH 10/12] dma-direct: rename and cleanup __phys_to_dma Christoph Hellwig
2020-09-10 13:30 ` Robin Murphy [this message]
2020-09-08 16:47 ` [PATCH 11/12] dma-mapping: move dma_common_{mmap, get_sgtable} out of mapping.c Christoph Hellwig
2020-09-10 13:34 ` Robin Murphy
2020-09-11 7:15 ` [PATCH 11/12] dma-mapping: move dma_common_{mmap,get_sgtable} " Christoph Hellwig
2020-09-08 16:47 ` [PATCH 12/12] dma-mapping: move the dma_declare_coherent_memory documentation Christoph Hellwig
2020-09-10 13:51 ` Robin Murphy
2020-09-11 7:17 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17c556b8-2c02-7d03-404b-194cffcbebfb@arm.com \
--to=robin.murphy@arm.com \
--cc=fenghua.yu@intel.com \
--cc=hch@lst.de \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=tony.luck@intel.com \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).