iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
	joro@8bytes.org, alex.williamson@redhat.com,
	jacob.jun.pan@linux.intel.com, yi.l.liu@linux.intel.com,
	jean-philippe.brucker@arm.com, will.deacon@arm.com,
	robin.murphy@arm.com
Cc: marc.zyngier@arm.com, kevin.tian@intel.com, ashok.raj@intel.com
Subject: [PATCH v4 02/22] iommu: introduce device fault data
Date: Mon, 18 Feb 2019 14:54:43 +0100	[thread overview]
Message-ID: <20190218135504.25048-3-eric.auger@redhat.com> (raw)
In-Reply-To: <20190218135504.25048-1-eric.auger@redhat.com>

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

Device faults detected by IOMMU can be reported outside the IOMMU
subsystem for further processing. This patch introduces
a generic device fault data structure.

The fault can be either an unrecoverable fault or a page request,
also referred to as a recoverable fault.

We only care about non internal faults that are likely to be reported
to an external subsystem.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>

---

v3 -> v4:
- use a union containing aither an unrecoverable fault or a page
  request message. Move the device private data in the page request
  structure. Reshuffle the fields and use flags.
- move fault perm attributes to the uapi
- remove a bunch of iommu_fault_reason enum values that were related
  to internal errors
---
 include/linux/iommu.h      |  47 +++++++++++++++
 include/uapi/linux/iommu.h | 115 +++++++++++++++++++++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100644 include/uapi/linux/iommu.h

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index e90da6b6f3d1..032d33894723 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <uapi/linux/iommu.h>
 
 #define IOMMU_READ	(1 << 0)
 #define IOMMU_WRITE	(1 << 1)
@@ -48,6 +49,7 @@ struct bus_type;
 struct device;
 struct iommu_domain;
 struct notifier_block;
+struct iommu_fault_event;
 
 /* iommu fault flags */
 #define IOMMU_FAULT_READ	0x0
@@ -55,6 +57,7 @@ struct notifier_block;
 
 typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
 			struct device *, unsigned long, int, void *);
+typedef int (*iommu_dev_fault_handler_t)(struct iommu_fault_event *, void *);
 
 struct iommu_domain_geometry {
 	dma_addr_t aperture_start; /* First address that can be mapped    */
@@ -243,6 +246,49 @@ struct iommu_device {
 	struct device *dev;
 };
 
+/**
+ * struct iommu_fault_event - Generic per device fault data
+ *
+ * - PCI and non-PCI devices
+ * - Recoverable faults (e.g. page request), information based on PCI ATS
+ *   and PASID spec.
+ * - Un-recoverable faults of device interest
+ * - DMA remapping and IRQ remapping faults
+ *
+ * @fault: fault descriptor
+ * @iommu_private: used by the IOMMU driver for storing fault-specific
+ *                 data. Users should not modify this field before
+ *                 sending the fault response.
+ */
+struct iommu_fault_event {
+	struct iommu_fault fault;
+	u64 iommu_private;
+};
+
+/**
+ * struct iommu_fault_param - per-device IOMMU fault data
+ * @dev_fault_handler: Callback function to handle IOMMU faults at device level
+ * @data: handler private data
+ *
+ */
+struct iommu_fault_param {
+	iommu_dev_fault_handler_t handler;
+	void *data;
+};
+
+/**
+ * struct iommu_param - collection of per-device IOMMU data
+ *
+ * @fault_param: IOMMU detected device fault reporting data
+ *
+ * TODO: migrate other per device data pointers under iommu_dev_data, e.g.
+ *	struct iommu_group	*iommu_group;
+ *	struct iommu_fwspec	*iommu_fwspec;
+ */
+struct iommu_param {
+	struct iommu_fault_param *fault_param;
+};
+
 int  iommu_device_register(struct iommu_device *iommu);
 void iommu_device_unregister(struct iommu_device *iommu);
 int  iommu_device_sysfs_add(struct iommu_device *iommu,
@@ -418,6 +464,7 @@ struct iommu_ops {};
 struct iommu_group {};
 struct iommu_fwspec {};
 struct iommu_device {};
+struct iommu_fault_param {};
 
 static inline bool iommu_present(struct bus_type *bus)
 {
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
new file mode 100644
index 000000000000..7ebf23ed6ccb
--- /dev/null
+++ b/include/uapi/linux/iommu.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * IOMMU user API definitions
+ */
+
+#ifndef _UAPI_IOMMU_H
+#define _UAPI_IOMMU_H
+
+#include <linux/types.h>
+
+/*  Generic fault types, can be expanded IRQ remapping fault */
+enum iommu_fault_type {
+	IOMMU_FAULT_DMA_UNRECOV = 1,	/* unrecoverable fault */
+	IOMMU_FAULT_PAGE_REQ,		/* page request fault */
+};
+
+enum iommu_fault_reason {
+	IOMMU_FAULT_REASON_UNKNOWN = 0,
+
+	/* Could not access the PASID table (fetch caused external abort) */
+	IOMMU_FAULT_REASON_PASID_FETCH,
+
+	/* pasid entry is invalid or has configuration errors */
+	IOMMU_FAULT_REASON_BAD_PASID_ENTRY,
+
+	/*
+	 * PASID is out of range (e.g. exceeds the maximum PASID
+	 * supported by the IOMMU) or disabled.
+	 */
+	IOMMU_FAULT_REASON_PASID_INVALID,
+
+	/*
+	 * An external abort occurred fetching (or updating) a translation
+	 * table descriptor
+	 */
+	IOMMU_FAULT_REASON_WALK_EABT,
+
+	/*
+	 * Could not access the page table entry (Bad address),
+	 * actual translation fault
+	 */
+	IOMMU_FAULT_REASON_PTE_FETCH,
+
+	/* Protection flag check failed */
+	IOMMU_FAULT_REASON_PERMISSION,
+
+	/* access flag check failed */
+	IOMMU_FAULT_REASON_ACCESS,
+
+	/* Output address of a translation stage caused Address Size fault */
+	IOMMU_FAULT_REASON_OOR_ADDRESS,
+};
+
+/**
+ * Unrecoverable fault data
+ * @reason: reason of the fault
+ * @addr: offending page address
+ * @fetch_addr: address that caused a fetch abort, if any
+ * @pasid: contains process address space ID, used in shared virtual memory
+ * @perm: Requested permission access using by the incoming transaction
+ *	IOMMU_FAULT_READ, IOMMU_FAULT_WRITE
+ */
+struct iommu_fault_unrecoverable {
+	__u32	reason; /* enum iommu_fault_reason */
+#define IOMMU_FAULT_UNRECOV_PASID_VALID		(1 << 0)
+#define IOMMU_FAULT_UNRECOV_PERM_VALID		(1 << 1)
+#define IOMMU_FAULT_UNRECOV_ADDR_VALID		(1 << 2)
+#define IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID	(1 << 3)
+	__u32	flags;
+	__u32	pasid;
+#define IOMMU_FAULT_PERM_WRITE	(1 << 0) /* write */
+#define IOMMU_FAULT_PERM_EXEC	(1 << 1) /* exec */
+#define IOMMU_FAULT_PERM_PRIV	(1 << 2) /* priviledged */
+#define IOMMU_FAULT_PERM_INST	(1 << 3) /* instruction */
+	__u32	perm;
+	__u64	addr;
+	__u64	fetch_addr;
+};
+
+/*
+ * Page Request data (aka. recoverable fault data)
+ * @flags : encodes whether the pasid is valid and whether this
+ * is the last page in group
+ * @pasid: pasid
+ * @grpid: page request group index
+ * @perm: requested page permissions
+ * @addr: page address
+ */
+struct iommu_fault_page_request {
+#define IOMMU_FAULT_PAGE_REQUEST_PASID_PRESENT	(1 << 0)
+#define IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE	(1 << 1)
+#define IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA	(1 << 2)
+	__u32   flags;
+	__u32	pasid;
+	__u32	grpid;
+	__u32	perm;
+	__u64	addr;
+	__u64	private_data[2];
+};
+
+/**
+ * struct iommu_fault - Generic fault data
+ *
+ * @type contains fault type
+ */
+
+struct iommu_fault {
+	__u32	type;   /* enum iommu_fault_type */
+	__u32	reserved;
+	union {
+		struct iommu_fault_unrecoverable event;
+		struct iommu_fault_page_request prm;
+	};
+};
+#endif /* _UAPI_IOMMU_H */
-- 
2.20.1

  parent reply	other threads:[~2019-02-18 13:54 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-18 13:54 [PATCH v4 00/22] SMMUv3 Nested Stage Setup Eric Auger
2019-02-18 13:54 ` [PATCH v4 01/22] driver core: add per device iommu param Eric Auger
2019-02-18 13:54 ` Eric Auger [this message]
2019-03-05 14:56   ` [PATCH v4 02/22] iommu: introduce device fault data Jean-Philippe Brucker
2019-03-06  9:38     ` Auger Eric
2019-03-06 12:08       ` Jean-Philippe Brucker
2019-03-06 11:03     ` Auger Eric
2019-03-06 14:30     ` Auger Eric
2019-03-06 16:07       ` Jean-Philippe Brucker
2019-03-06 17:32         ` Auger Eric
2019-02-18 13:54 ` [PATCH v4 03/22] iommu: introduce device fault report API Eric Auger
2019-03-05 15:03   ` Jean-Philippe Brucker
2019-03-06 23:46     ` Jacob Pan
2019-03-07 11:42       ` Jean-Philippe Brucker
2019-02-18 13:54 ` [PATCH v4 04/22] iommu: Introduce attach/detach_pasid_table API Eric Auger
2019-03-05 15:23   ` Jean-Philippe Brucker
2019-03-05 18:15     ` Auger Eric
2019-02-18 13:54 ` [PATCH v4 05/22] iommu: Introduce cache_invalidate API Eric Auger
2019-03-05 15:28   ` Jean-Philippe Brucker
2019-03-05 18:14     ` Auger Eric
     [not found]       ` <0e041735-98e8-1d8c-c866-ad23e6cc1db5-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2019-03-06 21:59         ` Jacob Pan
2019-02-18 13:54 ` [PATCH v4 06/22] iommu: Introduce bind/unbind_guest_msi Eric Auger
2019-02-18 13:54 ` [PATCH v4 07/22] vfio: VFIO_IOMMU_ATTACH/DETACH_PASID_TABLE Eric Auger
2019-02-18 13:54 ` [PATCH v4 08/22] vfio: VFIO_IOMMU_CACHE_INVALIDATE Eric Auger
2019-02-18 13:54 ` [PATCH v4 09/22] vfio: VFIO_IOMMU_BIND/UNBIND_MSI Eric Auger
2019-02-18 13:54 ` [PATCH v4 10/22] iommu/arm-smmu-v3: Link domains and devices Eric Auger
2019-02-18 13:54 ` [PATCH v4 11/22] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2019-02-18 13:54 ` [PATCH v4 12/22] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2019-02-18 13:54 ` [PATCH v4 13/22] iommu/smmuv3: Implement attach/detach_pasid_table Eric Auger
2019-02-18 13:54 ` [PATCH v4 14/22] iommu/smmuv3: Implement cache_invalidate Eric Auger
2019-02-18 13:54 ` [PATCH v4 15/22] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2019-02-18 13:54 ` [PATCH v4 16/22] iommu/smmuv3: Implement bind/unbind_guest_msi Eric Auger
2019-02-18 13:54 ` [PATCH v4 17/22] iommu/smmuv3: Report non recoverable faults Eric Auger
2019-02-18 13:54 ` [PATCH v4 18/22] vfio-pci: Add a new VFIO_REGION_TYPE_NESTED region type Eric Auger
2019-02-18 13:55 ` [PATCH v4 19/22] vfio-pci: Register an iommu fault handler Eric Auger
2019-02-25 14:22   ` Vincent Stehlé
2019-02-25 17:30     ` Auger Eric
2019-02-18 13:55 ` [PATCH v4 20/22] vfio_pci: Allow to mmap the fault queue Eric Auger
2019-02-18 13:55 ` [PATCH v4 21/22] vfio-pci: Add VFIO_PCI_DMA_FAULT_IRQ_INDEX Eric Auger
2019-02-18 13:55 ` [PATCH v4 22/22] vfio: Document nested stage control Eric Auger
2019-03-05  8:07 ` [PATCH v4 00/22] SMMUv3 Nested Stage Setup Auger Eric
2019-03-05 16:42 ` Auger Eric
2019-06-09 13:44 [PATCH v4 00/22] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-06-09 13:44 ` [PATCH v4 02/22] iommu: Introduce device fault data Jacob Pan
2019-06-18 15:42   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190218135504.25048-3-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe.brucker@arm.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=robin.murphy@arm.com \
    --cc=will.deacon@arm.com \
    --cc=yi.l.liu@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).