IOMMU Archive on lore.kernel.org
 help / color / Atom feed
From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Yi L <yi.l.liu@linux.intel.com>,
	"Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>,
	Jean-Philippe Brucker <jean-philippe.brucker@arm.com>,
	iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Alex Williamson <alex.williamson@redhat.com>,
	Liu@mail.linuxfoundation.org,
	Andriy Shevchenko <andriy.shevchenko@linux.intel.com>,
	David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH v4 08/22] iommu: Introduce attach/detach_pasid_table API
Date: Tue, 18 Jun 2019 16:41:28 +0100
Message-ID: <20190618164128.0000204f@huawei.com> (raw)
In-Reply-To: <1560087862-57608-9-git-send-email-jacob.jun.pan@linux.intel.com>

On Sun, 9 Jun 2019 06:44:08 -0700
Jacob Pan <jacob.jun.pan@linux.intel.com> wrote:

> In virtualization use case, when a guest is assigned
> a PCI host device, protected by a virtual IOMMU on the guest,
> the physical IOMMU must be programmed to be consistent with
> the guest mappings. If the physical IOMMU supports two
> translation stages it makes sense to program guest mappings
> onto the first stage/level (ARM/Intel terminology) while the host
> owns the stage/level 2.
> 
> In that case, it is mandated to trap on guest configuration
> settings and pass those to the physical iommu driver.
> 
> This patch adds a new API to the iommu subsystem that allows
> to set/unset the pasid table information.
> 
> A generic iommu_pasid_table_config struct is introduced in
> a new iommu.h uapi header. This is going to be used by the VFIO
> user API.

Another case where strictly speaking stuff is introduced that this series
doesn't use.  I don't know what the plans are to merge the various
related series though so this might make sense in general. Right now
it just bloats this series a bit..
> 
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
> Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
> Signed-off-by: Ashok Raj <ashok.raj@intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
> Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
> ---
>  drivers/iommu/iommu.c      | 19 +++++++++++++++++
>  include/linux/iommu.h      | 18 ++++++++++++++++
>  include/uapi/linux/iommu.h | 52 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 89 insertions(+)
> 
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 166adb8..4496ccd 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -1619,6 +1619,25 @@ int iommu_page_response(struct device *dev,
>  }
>  EXPORT_SYMBOL_GPL(iommu_page_response);
>  
> +int iommu_attach_pasid_table(struct iommu_domain *domain,
> +			     struct iommu_pasid_table_config *cfg)
> +{
> +	if (unlikely(!domain->ops->attach_pasid_table))
> +		return -ENODEV;
> +
> +	return domain->ops->attach_pasid_table(domain, cfg);
> +}
> +EXPORT_SYMBOL_GPL(iommu_attach_pasid_table);
> +
> +void iommu_detach_pasid_table(struct iommu_domain *domain)
> +{
> +	if (unlikely(!domain->ops->detach_pasid_table))
> +		return;
> +
> +	domain->ops->detach_pasid_table(domain);
> +}
> +EXPORT_SYMBOL_GPL(iommu_detach_pasid_table);
> +
>  static void __iommu_detach_device(struct iommu_domain *domain,
>  				  struct device *dev)
>  {
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 950347b..d3edb10 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -264,6 +264,8 @@ struct page_response_msg {
>   * @sva_unbind: Unbind process address space from device
>   * @sva_get_pasid: Get PASID associated to a SVA handle
>   * @page_response: handle page request response
> + * @attach_pasid_table: attach a pasid table
> + * @detach_pasid_table: detach the pasid table
>   * @pgsize_bitmap: bitmap of all possible supported page sizes
>   */
>  struct iommu_ops {
> @@ -323,6 +325,9 @@ struct iommu_ops {
>  				      void *drvdata);
>  	void (*sva_unbind)(struct iommu_sva *handle);
>  	int (*sva_get_pasid)(struct iommu_sva *handle);
> +	int (*attach_pasid_table)(struct iommu_domain *domain,
> +				  struct iommu_pasid_table_config *cfg);
> +	void (*detach_pasid_table)(struct iommu_domain *domain);
>  
>  	int (*page_response)(struct device *dev, struct page_response_msg *msg);
>  
> @@ -434,6 +439,9 @@ extern int iommu_attach_device(struct iommu_domain *domain,
>  			       struct device *dev);
>  extern void iommu_detach_device(struct iommu_domain *domain,
>  				struct device *dev);
> +extern int iommu_attach_pasid_table(struct iommu_domain *domain,
> +				    struct iommu_pasid_table_config *cfg);
> +extern void iommu_detach_pasid_table(struct iommu_domain *domain);
>  extern struct iommu_domain *iommu_get_domain_for_dev(struct device *dev);
>  extern struct iommu_domain *iommu_get_dma_domain(struct device *dev);
>  extern int iommu_map(struct iommu_domain *domain, unsigned long iova,
> @@ -947,6 +955,13 @@ iommu_aux_get_pasid(struct iommu_domain *domain, struct device *dev)
>  	return -ENODEV;
>  }
>  
> +static inline
> +int iommu_attach_pasid_table(struct iommu_domain *domain,
> +			     struct iommu_pasid_table_config *cfg)
> +{
> +	return -ENODEV;
> +}
> +
>  static inline struct iommu_sva *
>  iommu_sva_bind_device(struct device *dev, struct mm_struct *mm, void *drvdata)
>  {
> @@ -968,6 +983,9 @@ static inline int iommu_sva_get_pasid(struct iommu_sva *handle)
>  	return IOMMU_PASID_INVALID;
>  }
>  
> +static inline
> +void iommu_detach_pasid_table(struct iommu_domain *domain) {}
> +
>  #endif /* CONFIG_IOMMU_API */
>  
>  #ifdef CONFIG_IOMMU_DEBUGFS
> diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
> index aaa3b6a..3976767 100644
> --- a/include/uapi/linux/iommu.h
> +++ b/include/uapi/linux/iommu.h
> @@ -115,4 +115,56 @@ struct iommu_fault {
>  		struct iommu_fault_page_request prm;
>  	};
>  };
> +
> +/**
> + * struct iommu_pasid_smmuv3 - ARM SMMUv3 Stream Table Entry stage 1 related
> + *     information
> + * @version: API version of this structure
> + * @s1fmt: STE s1fmt (format of the CD table: single CD, linear table
> + *         or 2-level table)
> + * @s1dss: STE s1dss (specifies the behavior when @pasid_bits != 0
> + *         and no PASID is passed along with the incoming transaction)
> + * @padding: reserved for future use (should be zero)
> + *
> + * The PASID table is referred to as the Context Descriptor (CD) table on ARM
> + * SMMUv3. Please refer to the ARM SMMU 3.x spec (ARM IHI 0070A) for full
> + * details.
> + */
> +struct iommu_pasid_smmuv3 {
> +#define PASID_TABLE_SMMUV3_CFG_VERSION_1 1
> +	__u32	version;
> +	__u8	s1fmt;
> +	__u8	s1dss;
> +	__u8	padding[2];
> +};
> +
> +/**
> + * struct iommu_pasid_table_config - PASID table data used to bind guest PASID
> + *     table to the host IOMMU
> + * @version: API version to prepare for future extensions
> + * @format: format of the PASID table
> + * @base_ptr: guest physical address of the PASID table
> + * @pasid_bits: number of PASID bits used in the PASID table
> + * @config: indicates whether the guest translation stage must
> + *          be translated, bypassed or aborted.
> + * @padding: reserved for future use (should be zero)
> + * @smmuv3: table information when @format is %IOMMU_PASID_FORMAT_SMMUV3
> + */
> +struct iommu_pasid_table_config {
> +#define PASID_TABLE_CFG_VERSION_1 1
> +	__u32	version;
> +#define IOMMU_PASID_FORMAT_SMMUV3	1
> +	__u32	format;
> +	__u64	base_ptr;
> +	__u8	pasid_bits;
> +#define IOMMU_PASID_CONFIG_TRANSLATE	1
> +#define IOMMU_PASID_CONFIG_BYPASS	2
> +#define IOMMU_PASID_CONFIG_ABORT	3
> +	__u8	config;
> +	__u8    padding[6];
> +	union {
> +		struct iommu_pasid_smmuv3 smmuv3;
> +	};
> +};
> +
>  #endif /* _UAPI_IOMMU_H */


_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply index

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-09 13:44 [PATCH v4 00/22] Shared virtual address IOMMU and VT-d support Jacob Pan
2019-06-09 13:44 ` [PATCH v4 01/22] driver core: Add per device iommu param Jacob Pan
2019-06-09 13:44 ` [PATCH v4 02/22] iommu: Introduce device fault data Jacob Pan
2019-06-18 15:42   ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 03/22] iommu: Introduce device fault report API Jacob Pan
2019-06-18 15:41   ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 04/22] iommu: Add recoverable fault reporting Jacob Pan
2019-06-18 15:44   ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 05/22] iommu: Add a timeout parameter for PRQ response Jacob Pan
2019-06-09 13:44 ` [PATCH v4 06/22] trace/iommu: Add sva trace events Jacob Pan
2019-06-09 13:44 ` [PATCH v4 07/22] iommu: Use device fault trace event Jacob Pan
2019-06-09 13:44 ` [PATCH v4 08/22] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2019-06-18 15:41   ` Jonathan Cameron [this message]
2019-06-24 15:06     ` Auger Eric
2019-06-24 15:23       ` Jean-Philippe Brucker
2019-06-09 13:44 ` [PATCH v4 09/22] iommu: Introduce cache_invalidate API Jacob Pan
2019-06-18 15:41   ` Jonathan Cameron
2019-06-09 13:44 ` [PATCH v4 10/22] iommu: Fix compile error without IOMMU_API Jacob Pan
2019-06-18 14:10   ` Jonathan Cameron
2019-06-24 22:28     ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 11/22] iommu: Introduce guest PASID bind function Jacob Pan
2019-06-18 15:36   ` Jean-Philippe Brucker
2019-06-24 22:24     ` Jacob Pan
2019-07-16 16:44   ` Auger Eric
2019-08-05 21:02     ` Jacob Pan
2019-08-05 23:13     ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 12/22] iommu: Add I/O ASID allocator Jacob Pan
2019-06-18 16:50   ` Jonathan Cameron
2019-06-25 18:55     ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 13/22] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-07-16  9:29   ` Auger Eric
2019-08-13 16:57     ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 14/22] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-07-16  9:30   ` Auger Eric
2019-08-05 20:02     ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 15/22] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-06-18 15:57   ` Jonathan Cameron
2019-06-24 21:36     ` Jacob Pan
2019-06-27  1:53   ` Lu Baolu
2019-06-27 15:40     ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 16/22] iommu/vt-d: Move domain helper to header Jacob Pan
2019-07-16  9:33   ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 17/22] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-06-18 16:03   ` Jonathan Cameron
2019-06-24 23:44     ` Jacob Pan
2019-07-16  9:52   ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 18/22] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-06-09 13:44 ` [PATCH v4 19/22] iommu/vt-d: Clean up for SVM device list Jacob Pan
2019-06-18 16:42   ` Jonathan Cameron
2019-06-24 23:59     ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 20/22] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-06-18 16:44   ` Jonathan Cameron
2019-06-24 22:41     ` Jacob Pan
2019-06-27  2:50   ` Lu Baolu
2019-06-27 20:22     ` Jacob Pan
2019-07-05  2:21       ` Lu Baolu
2019-08-14 17:20         ` Jacob Pan
2019-07-16 16:45   ` Auger Eric
2019-07-16 17:04     ` Raj, Ashok
2019-07-18  7:47       ` Auger Eric
2019-06-09 13:44 ` [PATCH v4 21/22] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-07-18  8:35   ` Auger Eric
2019-08-14 20:17     ` Jacob Pan
2019-06-09 13:44 ` [PATCH v4 22/22] iommu/vt-d: Add svm/sva invalidate function Jacob Pan

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190618164128.0000204f@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=Liu@mail.linuxfoundation.org \
    --cc=alex.williamson@redhat.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=ashok.raj@intel.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe.brucker@arm.com \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yi.l.liu@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

IOMMU Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iommu/0 linux-iommu/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iommu linux-iommu/ https://lore.kernel.org/linux-iommu \
		iommu@lists.linux-foundation.org iommu@archiver.kernel.org
	public-inbox-index linux-iommu


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linux-foundation.lists.iommu


AGPL code for this site: git clone https://public-inbox.org/ public-inbox