IOMMU Archive on lore.kernel.org
 help / color / Atom feed
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: Lu Baolu <baolu.lu@linux.intel.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>,
	David Woodhouse <dwmw2@infradead.org>,
	iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Alex Williamson <alex.williamson@redhat.com>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	Jonathan Cameron <jic23@kernel.org>
Subject: Re: [PATCH v7 03/11] iommu/vt-d: Add custom allocator for IOASID
Date: Thu, 24 Oct 2019 21:43:11 -0700
Message-ID: <20191024214311.43d76a5c@jacob-builder> (raw)
In-Reply-To: <ae437be4-e633-e670-0e1f-d07b4364f651@linux.intel.com>

Hi Baolu,

Thanks for the review. please see my comments inline.

On Fri, 25 Oct 2019 10:30:48 +0800
Lu Baolu <baolu.lu@linux.intel.com> wrote:

> Hi Jacob,
> 
> On 10/25/19 3:54 AM, Jacob Pan wrote:
> > When VT-d driver runs in the guest, PASID allocation must be
> > performed via virtual command interface. This patch registers a
> > custom IOASID allocator which takes precedence over the default
> > XArray based allocator. The resulting IOASID allocation will always
> > come from the host. This ensures that PASID namespace is system-
> > wide.
> > 
> > Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> > Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > ---
> >   drivers/iommu/Kconfig       |  1 +
> >   drivers/iommu/intel-iommu.c | 67
> > +++++++++++++++++++++++++++++++++++++++++++++
> > include/linux/intel-iommu.h |  2 ++ 3 files changed, 70
> > insertions(+)
> > 
> > diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> > index fd50ddffffbf..961fe5795a90 100644
> > --- a/drivers/iommu/Kconfig
> > +++ b/drivers/iommu/Kconfig
> > @@ -211,6 +211,7 @@ config INTEL_IOMMU_SVM
> >   	bool "Support for Shared Virtual Memory with Intel IOMMU"
> >   	depends on INTEL_IOMMU && X86
> >   	select PCI_PASID
> > +	select IOASID
> >   	select MMU_NOTIFIER
> >   	help
> >   	  Shared Virtual Memory (SVM) provides a facility for
> > devices diff --git a/drivers/iommu/intel-iommu.c
> > b/drivers/iommu/intel-iommu.c index 3f974919d3bd..ced1d89ef977
> > 100644 --- a/drivers/iommu/intel-iommu.c
> > +++ b/drivers/iommu/intel-iommu.c
> > @@ -1706,6 +1706,9 @@ static void free_dmar_iommu(struct
> > intel_iommu *iommu) if (ecap_prs(iommu->ecap))
> >   			intel_svm_finish_prq(iommu);
> >   	}
> > +	if (ecap_vcs(iommu->ecap) && vccap_pasid(iommu->vccap))
> > +
> > ioasid_unregister_allocator(&iommu->pasid_allocator);  
> 
> Since scalable mode is disabled if pasid allocator failed to register,
> add sm_support(iommu) check here will be better.
> 
I was thinking to be symmetric with register call, checking for the
same conditions. Also, I like your advice below to only disable SVA
instead of scalable mode.
> > +
> >   #endif
> >   }
> >   
> > @@ -4910,6 +4913,44 @@ static int __init
> > probe_acpi_namespace_devices(void) return 0;
> >   }
> >   
> > +#ifdef CONFIG_INTEL_IOMMU_SVM
> > +static ioasid_t intel_ioasid_alloc(ioasid_t min, ioasid_t max,
> > void *data) +{
> > +	struct intel_iommu *iommu = data;
> > +	ioasid_t ioasid;
> > +
> > +	/*
> > +	 * VT-d virtual command interface always uses the full 20
> > bit
> > +	 * PASID range. Host can partition guest PASID range based
> > on
> > +	 * policies but it is out of guest's control.
> > +	 */
> > +	if (min < PASID_MIN || max > intel_pasid_max_id)
> > +		return INVALID_IOASID;
> > +
> > +	if (vcmd_alloc_pasid(iommu, &ioasid))
> > +		return INVALID_IOASID;
> > +
> > +	return ioasid;
> > +}
> > +
> > +static void intel_ioasid_free(ioasid_t ioasid, void *data)
> > +{
> > +	struct intel_iommu *iommu = data;
> > +
> > +	if (!iommu)
> > +		return;
> > +	/*
> > +	 * Sanity check the ioasid owner is done at upper layer,
> > e.g. VFIO
> > +	 * We can only free the PASID when all the devices are
> > unbond.
> > +	 */
> > +	if (ioasid_find(NULL, ioasid, NULL)) {
> > +		pr_alert("Cannot free active IOASID %d\n", ioasid);
> > +		return;
> > +	}
> > +	vcmd_free_pasid(iommu, ioasid);
> > +}
> > +#endif
> > +
> >   int __init intel_iommu_init(void)
> >   {
> >   	int ret = -ENODEV;
> > @@ -5020,6 +5061,32 @@ int __init intel_iommu_init(void)
> >   				       "%s", iommu->name);
> >   		iommu_device_set_ops(&iommu->iommu,
> > &intel_iommu_ops); iommu_device_register(&iommu->iommu);
> > +#ifdef CONFIG_INTEL_IOMMU_SVM
> > +		if (ecap_vcs(iommu->ecap) &&
> > vccap_pasid(iommu->vccap)) {
> > +			pr_info("Register custom PASID
> > allocator\n");
> > +			/*
> > +			 * Register a custom ASID allocator if we
> > are running
> > +			 * in a guest, the purpose is to have a
> > system wide PASID
> > +			 * namespace among all PASID users.
> > +			 * There can be multiple vIOMMUs in each
> > guest but only
> > +			 * one allocator is active. All vIOMMU
> > allocators will
> > +			 * eventually be calling the same host
> > allocator.
> > +			 */
> > +			iommu->pasid_allocator.alloc =
> > intel_ioasid_alloc;
> > +			iommu->pasid_allocator.free =
> > intel_ioasid_free;
> > +			iommu->pasid_allocator.pdata = (void
> > *)iommu;
> > +			ret =
> > ioasid_register_allocator(&iommu->pasid_allocator);
> > +			if (ret) {
> > +				pr_warn("Custom PASID allocator
> > registeration failed\n");
> > +				/*
> > +				 * Disable scalable mode on this
> > IOMMU if there
> > +				 * is no custom allocator. Mixing
> > SM capable vIOMMU
> > +				 * and non-SM vIOMMU are not
> > supported.
> > +				 */
> > +				intel_iommu_sm = 0;  
> 
> It's insufficient to disable scalable mode by only clearing
> intel_iommu_sm. The DMA_RTADDR_SMT bit in root entry has already been
> set. Probably, you need to
> 
> for each iommu
> 	clear DMA_RTADDR_SMT in root entry
> 
> Alternatively, since vSVA is the only customer of this custom PASID
> allocator, is it possible to only disable SVA here?
> 
Yeah, I think disable SVA is better. We can still do gIOVA in SM. I
guess we need to introduce a flag for sva_enabled.
> > +			}
> > +		}
> > +#endif
> >   	}
> >   
> >   	bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
> > diff --git a/include/linux/intel-iommu.h
> > b/include/linux/intel-iommu.h index 1d4b8dcdc5d8..c624733cb2e6
> > 100644 --- a/include/linux/intel-iommu.h
> > +++ b/include/linux/intel-iommu.h
> > @@ -19,6 +19,7 @@
> >   #include <linux/iommu.h>
> >   #include <linux/io-64-nonatomic-lo-hi.h>
> >   #include <linux/dmar.h>
> > +#include <linux/ioasid.h>
> >   
> >   #include <asm/cacheflush.h>
> >   #include <asm/iommu.h>
> > @@ -546,6 +547,7 @@ struct intel_iommu {
> >   #ifdef CONFIG_INTEL_IOMMU_SVM
> >   	struct page_req_dsc *prq;
> >   	unsigned char prq_name[16];    /* Name for PRQ interrupt
> > */
> > +	struct ioasid_allocator_ops pasid_allocator; /* Custom
> > allocator for PASIDs */ #endif
> >   	struct q_inval  *qi;            /* Queued invalidation
> > info */ u32 *iommu_state; /* Store iommu states between suspend and
> > resume.*/ 
> 
> Best regards,
> baolu

[Jacob Pan]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply index

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-24 19:54 [PATCH v7 00/11] Nested Shared Virtual Address (SVA) VT-d support Jacob Pan
2019-10-24 19:54 ` [PATCH v7 01/11] iommu/vt-d: Cache virtual command capability register Jacob Pan
2019-10-25  2:53   ` Lu Baolu
2019-10-25  6:06   ` Tian, Kevin
2019-11-08 10:32   ` Auger Eric
2019-10-24 19:54 ` [PATCH v7 02/11] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-10-25  6:19   ` Tian, Kevin
2019-10-29 17:14     ` Jacob Pan
2019-10-29 18:16       ` Tian, Kevin
2019-11-08 10:33   ` Auger Eric
2019-11-08 22:22     ` Jacob Pan
2019-10-24 19:54 ` [PATCH v7 03/11] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-10-25  2:30   ` Lu Baolu
2019-10-25  4:43     ` Jacob Pan [this message]
2019-10-25  6:40       ` Tian, Kevin
2019-10-25 14:39         ` Lu Baolu
2019-10-25 15:52           ` Tian, Kevin
2019-10-28 22:49             ` Jacob Pan
2019-10-29  2:22               ` Lu Baolu
2019-10-25  6:31   ` Tian, Kevin
2019-10-28 22:52     ` Jacob Pan
2019-11-08 10:40   ` Auger Eric
2019-11-08 22:26     ` Jacob Pan
2019-10-24 19:54 ` [PATCH v7 04/11] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-10-25  5:47   ` Lu Baolu
2019-11-01 18:29     ` Jacob Pan
2019-10-25  6:41   ` Tian, Kevin
2019-10-28 22:46     ` Jacob Pan
2019-11-08 11:30   ` Auger Eric
2019-11-08 22:55     ` Jacob Pan
2019-11-12  9:54       ` Auger Eric
2019-10-24 19:54 ` [PATCH v7 05/11] iommu/vt-d: Move domain helper to header Jacob Pan
2019-10-25  5:26   ` Lu Baolu
2019-10-24 19:54 ` [PATCH v7 06/11] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-10-25  5:32   ` Lu Baolu
2019-10-25  6:42   ` Tian, Kevin
2019-10-28 22:41     ` Jacob Pan
2019-11-12  9:54   ` Auger Eric
2019-10-24 19:55 ` [PATCH v7 07/11] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-10-25  7:04   ` Tian, Kevin
2019-11-01 21:10     ` Jacob Pan
2019-10-25 15:04   ` Lu Baolu
2019-10-25 16:06     ` Jacob Pan
2019-11-08 13:55   ` Auger Eric
2019-10-24 19:55 ` [PATCH v7 08/11] iommu/vt-d: Misc macro clean up for SVM Jacob Pan
2019-10-26  1:00   ` Lu Baolu
2019-10-28 22:38     ` Jacob Pan
2019-10-24 19:55 ` [PATCH v7 09/11] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-10-25  7:19   ` Tian, Kevin
2019-10-25 17:33     ` Jacob Pan
2019-10-28  6:03       ` Tian, Kevin
2019-10-28 16:02         ` Jacob Pan
2019-10-29  7:57           ` Tian, Kevin
2019-10-29 16:11             ` Jacob Pan
2019-10-29 18:04               ` Tian, Kevin
2019-10-29  2:33         ` Lu Baolu
2019-10-26  2:01   ` Lu Baolu
2019-10-28 22:29     ` Jacob Pan
2019-10-29  2:54       ` Lu Baolu
2019-10-29  4:11         ` Jacob Pan
2019-10-29  5:04           ` Lu Baolu
2019-10-24 19:55 ` [PATCH v7 10/11] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-10-25  7:21   ` Tian, Kevin
2019-11-01 21:30     ` Jacob Pan
2019-10-26  2:22   ` Lu Baolu
2019-11-01 21:28     ` Jacob Pan
2019-11-08 16:18   ` Auger Eric
2019-11-08 23:05     ` Jacob Pan
2019-10-24 19:55 ` [PATCH v7 11/11] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-10-25  7:27   ` Tian, Kevin
2019-10-26  2:40     ` Lu Baolu
2019-10-26  7:03       ` Lu Baolu
2019-10-28  6:06         ` Tian, Kevin
2019-10-28 16:10           ` Jacob Pan
2019-10-29 18:52             ` Tian, Kevin
2019-10-29 19:25               ` Jacob Pan
2019-10-28 16:13     ` Jacob Pan
2019-11-12 10:28   ` Auger Eric

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191024214311.43d76a5c@jacob-builder \
    --to=jacob.jun.pan@linux.intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.com \
    --cc=jic23@kernel.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

IOMMU Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iommu/0 linux-iommu/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iommu linux-iommu/ https://lore.kernel.org/linux-iommu \
		iommu@lists.linux-foundation.org
	public-inbox-index linux-iommu

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linux-foundation.lists.iommu


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git