IOMMU Archive on lore.kernel.org
 help / color / Atom feed
From: Jean-Philippe Brucker <jean-philippe@linaro.org>
To: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	LKML <linux-kernel@vger.kernel.org>,
	iommu@lists.linux-foundation.org,
	Alex Williamson <alex.williamson@redhat.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Jonathan Cameron <jic23@kernel.org>
Subject: Re: [PATCH 05/10] iommu/ioasid: Create an IOASID set for host SVA use
Date: Tue, 7 Apr 2020 13:01:46 +0200
Message-ID: <20200407110146.GB285264@myrica> (raw)
In-Reply-To: <20200406083353.73efda5b@jacob-builder>

On Mon, Apr 06, 2020 at 08:33:53AM -0700, Jacob Pan wrote:
> Hi Jean,
> 
> On Wed, 1 Apr 2020 15:53:16 +0200
> Jean-Philippe Brucker <jean-philippe@linaro.org> wrote:
> 
> > On Wed, Mar 25, 2020 at 10:55:26AM -0700, Jacob Pan wrote:
> > > Bare metal SVA allocates IOASIDs for native process addresses. This
> > > should be separated from VM allocated IOASIDs thus under its own
> > > set.
> > > 
> > > This patch creates a system IOASID set with its quota set to
> > > PID_MAX. This is a reasonable default in that SVM capable devices
> > > can only bind to limited user processes.  
> > 
> > Yes realistically there won't be more than PID_MAX_DEFAULT=0x8000
> > bound address spaces. My machine uses a PID_MAX of 4 million though,
> > so in theory more than 0x8000 processes may want a bond.
> Got it, I assume we can adjust the system set quota as necessary.
> 
> > On Arm the
> > limit of shared contexts per VM is currently a little less than
> > 0x10000 (which is the number of CPU ASIDs).
> > 
> I guess shared contexts means shared address? then it makes sense
> #IOASID < #ASID.

Yes by shared contexts I mean shared address spaces. Theoretically #ASID <
#IOASID for us, because the max ASID size is 16-bit.

> 
> > But quotas are only necessary for VMs, when the host shares the PASID
> > space with them (which isn't a use-case for Arm systems as far as I
> > know, each VM gets its own PASID space).
> Is there a host-guest PASID translation? or the PASID used by the VM is
> physical PASID? When a page request comes in to SMMU, how does it know
> the owner of the PASID if PASID range can overlap between host and
> guest?

We assign PCI functions to VMs, so Page Requests are routed with
RID:PASID, not PASID alone. The SMMU finds the struct device associated
with the RID, and submits the fault with iommu_report_device_fault(). If
the VF is assigned to a VM, then the page request gets injected into the
VM, otherwise it uses the host IOPF handler

> > Could we have quota-free IOASID sets for the host?
> > 
> Yes, perhaps just add a flag such that the set has its own namespace.
> You mean have this quota-free IOASID set even co-exist with VMs? I still
> don't get how PRQ works.
> 
> That is not the use case for VT-d in that we have to have system-wide
> allocation for host PASIDs. We have enqcmd which can take a PASID from
> the per task MSR and deliver to multiple devices, so even though the
> PASID table is per device the PASID name space must be global.
> 
> > For the SMMU I'd like to allocate two sets, one SVA and one private
> > for auxiliary domains, and I don't think giving either a quota makes
> > much sense at the moment.
> I agree we don;t need the quota if we don't support guest SVA at the
> same time.
> 
> So the sva set and aux_domain set PASIDs have their own namespaces?

They share the same PASID space, but they store different objects
(mm_struct and context descriptor, respectively) so they need different
ioasid_set tokens.

> 
> > There can be systems using only SVA and
> > systems using only private PASIDs. I think it should be
> > first-come-first-served until admins want a knob to define a policy
> > themselves, based on cgroups for example.
> > 
> > > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > > ---
> > >  drivers/iommu/intel-iommu.c | 8 +++++++-
> > >  drivers/iommu/ioasid.c      | 9 +++++++++
> > >  include/linux/ioasid.h      | 9 +++++++++
> > >  3 files changed, 25 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/iommu/intel-iommu.c
> > > b/drivers/iommu/intel-iommu.c index ec3fc121744a..af7a1ef7b31e
> > > 100644 --- a/drivers/iommu/intel-iommu.c
> > > +++ b/drivers/iommu/intel-iommu.c
> > > @@ -3511,8 +3511,14 @@ static int __init init_dmars(void)
> > >  		goto free_iommu;
> > >  
> > >  	/* PASID is needed for scalable mode irrespective to SVM */
> > > -	if (intel_iommu_sm)
> > > +	if (intel_iommu_sm) {
> > >  		ioasid_install_capacity(intel_pasid_max_id);
> > > +		/* We should not run out of IOASIDs at boot */
> > > +		if (ioasid_alloc_system_set(PID_MAX_DEFAULT)) {
> > > +			pr_err("Failed to enable host PASID
> > > allocator\n");
> > > +			intel_iommu_sm = 0;
> > > +		}
> > > +	}
> > >  
> > >  	/*
> > >  	 * for each drhd
> > > diff --git a/drivers/iommu/ioasid.c b/drivers/iommu/ioasid.c
> > > index 6265d2dbbced..9135af171a7c 100644
> > > --- a/drivers/iommu/ioasid.c
> > > +++ b/drivers/iommu/ioasid.c
> > > @@ -39,6 +39,9 @@ struct ioasid_data {
> > >  static ioasid_t ioasid_capacity;
> > >  static ioasid_t ioasid_capacity_avail;
> > >  
> > > +int system_ioasid_sid;
> > > +static DECLARE_IOASID_SET(system_ioasid);
> > > +
> > >  /* System capacity can only be set once */
> > >  void ioasid_install_capacity(ioasid_t total)
> > >  {
> > > @@ -51,6 +54,12 @@ void ioasid_install_capacity(ioasid_t total)
> > >  }
> > >  EXPORT_SYMBOL_GPL(ioasid_install_capacity);
> > >  
> > > +int ioasid_alloc_system_set(int quota)
> > > +{
> > > +	return ioasid_alloc_set(&system_ioasid, quota,
> > > &system_ioasid_sid); +}
> > > +EXPORT_SYMBOL_GPL(ioasid_alloc_system_set);  
> > 
> > I think this helper could stay in the VT-d driver for the moment. If
> > the SMMU driver ever implements auxiliary domains it will use a
> > private IOASID set, separate from the shared IOASID set managed by
> > iommu-sva. Both could qualify as "system set".
> > 
> Sounds good. Perhaps remove the special "system set". SVA code,
> VFIO, VT-d, or SMMU driver can all allocate their own sets.
> So to meet both SMMU and VT-d requirements, we should do:
> 1. add an IOASID_PRIVATE flag to ioasid_alloc_set(), indicating this is
> a private set
> 2. All APIs operate on the set_id accordingly, e.g. ioasid_find() will
> only search within the private set. Private set is excluded from from
> global search (VT-d needs this in PRQ).
> 
> Since VT-d already needs private PASIDs for guest SVM where
> GPASID!=HPASID, I feel we can just reuse the per ioasid_set Xarray for
> both quota-free private set and guest set.

Ok I think this sounds fine

Thanks,
Jean

> 
> 
> Thanks for the feedback!
> 
> Jacob
> 
> > Thanks,
> > Jean
> > 
> > > +
> > >  /*
> > >   * struct ioasid_allocator_data - Internal data structure to hold
> > > information
> > >   * about an allocator. There are two types of allocators:
> > > diff --git a/include/linux/ioasid.h b/include/linux/ioasid.h
> > > index 8c82d2625671..097b1cc043a3 100644
> > > --- a/include/linux/ioasid.h
> > > +++ b/include/linux/ioasid.h
> > > @@ -29,6 +29,9 @@ struct ioasid_allocator_ops {
> > >  	void *pdata;
> > >  };
> > >  
> > > +/* Shared IOASID set for reserved for host system use */
> > > +extern int system_ioasid_sid;
> > > +
> > >  #define DECLARE_IOASID_SET(name) struct ioasid_set name = { 0 }
> > >  
> > >  #if IS_ENABLED(CONFIG_IOASID)
> > > @@ -41,6 +44,7 @@ int ioasid_register_allocator(struct
> > > ioasid_allocator_ops *allocator); void
> > > ioasid_unregister_allocator(struct ioasid_allocator_ops
> > > *allocator); int ioasid_attach_data(ioasid_t ioasid, void *data);
> > > void ioasid_install_capacity(ioasid_t total); +int
> > > ioasid_alloc_system_set(int quota); int ioasid_alloc_set(struct
> > > ioasid_set *token, ioasid_t quota, int *sid); void
> > > ioasid_free_set(int sid, bool destroy_set); int
> > > ioasid_find_sid(ioasid_t ioasid); @@ -88,5 +92,10 @@ static inline
> > > void ioasid_install_capacity(ioasid_t total) {
> > >  }
> > >  
> > > +static inline int ioasid_alloc_system_set(int quota)
> > > +{
> > > +	return -ENOTSUPP;
> > > +}
> > > +
> > >  #endif /* CONFIG_IOASID */
> > >  #endif /* __LINUX_IOASID_H */
> > > -- 
> > > 2.7.4
> > >   
> 
> [Jacob Pan]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply index

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-25 17:55 [PATCH 00/10] IOASID extensions for guest SVA Jacob Pan
2020-03-25 17:55 ` [PATCH 01/10] iommu/ioasid: Introduce system-wide capacity Jacob Pan
2020-03-27  8:07   ` Tian, Kevin
2020-03-27 16:08     ` Jacob Pan
2020-04-01 13:45   ` Jean-Philippe Brucker
2020-04-01 22:50     ` Jacob Pan
2020-03-25 17:55 ` [PATCH 02/10] iommu/vt-d: Set IOASID capacity when SVM is enabled Jacob Pan
2020-03-27  8:08   ` Tian, Kevin
2020-03-25 17:55 ` [PATCH 03/10] iommu/ioasid: Introduce per set allocation APIs Jacob Pan
2020-03-26  2:12   ` Lu Baolu
2020-03-26 21:30     ` Jacob Pan
2020-03-27  8:38   ` Tian, Kevin
2020-03-27 16:59     ` Jacob Pan
2020-03-28  6:32       ` Tian, Kevin
2020-04-01 13:47   ` Jean-Philippe Brucker
2020-04-06 20:02     ` Jacob Pan
2020-04-07 11:01       ` Jean-Philippe Brucker
2020-04-21 21:51         ` Jacob Pan
2020-03-25 17:55 ` [PATCH 04/10] iommu/ioasid: Rename ioasid_set_data to avoid confusion with ioasid_set Jacob Pan
2020-03-27  9:35   ` Tian, Kevin
2020-03-25 17:55 ` [PATCH 05/10] iommu/ioasid: Create an IOASID set for host SVA use Jacob Pan
2020-03-27  9:41   ` Tian, Kevin
2020-03-27 17:28     ` Jacob Pan
2020-03-28  6:33       ` Tian, Kevin
2020-04-01 13:53   ` Jean-Philippe Brucker
2020-04-06 15:33     ` Jacob Pan
2020-04-07 11:01       ` Jean-Philippe Brucker [this message]
2020-04-13 22:06         ` Jacob Pan
2020-04-15 15:10           ` Jean-Philippe Brucker
2020-03-25 17:55 ` [PATCH 06/10] iommu/ioasid: Convert to set aware allocations Jacob Pan
2020-03-27  9:54   ` Tian, Kevin
2020-03-27 17:41     ` Jacob Pan
2020-03-28  6:40       ` Tian, Kevin
2020-04-06 20:07         ` Jacob Pan
2020-04-01 13:55   ` Jean-Philippe Brucker
2020-04-01 22:45     ` Jacob Pan
2020-03-25 17:55 ` [PATCH 07/10] iommu/ioasid: Use mutex instead of spinlock Jacob Pan
2020-03-27  9:55   ` Tian, Kevin
2020-04-01 13:58   ` Jean-Philippe Brucker
2020-03-25 17:55 ` [PATCH 08/10] iommu/ioasid: Introduce notifier APIs Jacob Pan
2020-03-27 10:03   ` Tian, Kevin
2020-03-27 18:36     ` Jacob Pan
2020-03-28  6:43       ` Tian, Kevin
2020-03-31 15:13         ` Jacob Pan
2020-04-01 14:00   ` Jean-Philippe Brucker
2020-04-10 15:43     ` Jacob Pan
2020-03-25 17:55 ` [PATCH 09/10] iommu/ioasid: Support ioasid_set quota adjustment Jacob Pan
2020-03-27 10:09   ` Tian, Kevin
2020-03-27 23:30     ` Jacob Pan
2020-03-28  6:44       ` Tian, Kevin
2020-03-25 17:55 ` [PATCH 10/10] iommu/vt-d: Register PASID notifier for status change Jacob Pan
2020-03-27 10:22   ` Tian, Kevin
2020-03-27 23:47     ` Jacob Pan
2020-04-01 14:03 ` [PATCH 00/10] IOASID extensions for guest SVA Jean-Philippe Brucker
2020-04-01 23:38   ` Jacob Pan
2020-04-02 12:26     ` Jean-Philippe Brucker
2020-04-02 16:09       ` Jacob Pan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200407110146.GB285264@myrica \
    --to=jean-philippe@linaro.org \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe@linaro.com \
    --cc=jic23@kernel.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

IOMMU Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iommu/0 linux-iommu/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iommu linux-iommu/ https://lore.kernel.org/linux-iommu \
		iommu@lists.linux-foundation.org
	public-inbox-index linux-iommu

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linux-foundation.lists.iommu


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git