iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/07] MT6779 IOMMU SUPPORT
@ 2020-06-17  3:00 Chao Hao
  2020-06-17  3:00 ` [PATCH v4 1/7] dt-bindings: mediatek: Add bindings for MT6779 Chao Hao
                   ` (6 more replies)
  0 siblings, 7 replies; 25+ messages in thread
From: Chao Hao @ 2020-06-17  3:00 UTC (permalink / raw)
  To: Joerg Roedel, Rob Herring, Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	linux-mediatek, linux-arm-kernel

This patchset adds mt6779 iommu support.
mt6779 has two iommus, they are MM_IOMMU(M4U) and APU_IOMMU which used ARM Short-Descriptor translation format.
The mt6779's MM_IOMMU-SMI and APU_IOMMU HW diagram is as below, it is only a brief diagram:

		       EMI
		        |
     --------------------------------------
     |                                    |
  MM_IOMMU                            APU_IOMMU
     |                                    |
  SMI_COMMOM-----------                 APU_BUS
     |                |                   |
  SMI_LARB(0~11)      |                   |
     |                |                   |
     |                |             --------------
     |                |             |     |      |
Multimedia engine      CCU           VPU   MDLA   EMDA

All the connections are hardware fixed, software can not adjust it.
Compared with mt8183, SMI_BUS_ID width has changed from 10 to 12. SMI Larb number is described in bit[11:7],
Port number is described in bit[6:2]. In addition, there are some registers has changed in mt6779, so we need
to redefine and reuse them.

The patchset only used MM_IOMMU, so we only add MM_IOMMU basic function, such as smi_larb port definition, registers
definition and hardware initialization.

change notes:
 v4:
   1. Rebase on v5.8-rc1.
   2. Fix coding style.
   3. Add F_MMU_IN_DRDER_WR_EN definition in MISC_CTRL to improve performance.

 v3:
   1. Rebase on v5.7-rc1.
   2. Remove unused port definition,ex:APU and CCU port in mt6779-larb-port.h.
   3. Remove "change single domain to multiple domain" part(from PATCH v2 09/19 to PATCH v2 19/19).
   4. Redesign mt6779 basic part
      (1)Add some register definition and reuse them.
      (2)Redesign smi larb bus ID to analyze IOMMU translation fault.
      (3)Only init MM_IOMMU and not use APU_IOMMU.

 http://lists.infradead.org/pipermail/linux-mediatek/2020-May/029811.html

 v2:
   1. Rebase on v5.5-rc1.
   2. Delete M4U_PORT_UNKNOWN define because of not use it.
   3. Correct coding format.
   4. Rename offset=0x48 register.
   5. Split "iommu/mediatek: Add mt6779 IOMMU basic support(patch v1)" to several patches(patch v2).

 http://lists.infradead.org/pipermail/linux-mediatek/2020-January/026131.html

 v1:
 http://lists.infradead.org/pipermail/linux-mediatek/2019-November/024567.html

Chao Hao (7):
  dt-bindings: mediatek: Add bindings for MT6779
  iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to
                  MISC_CTRL
  iommu/mediatek: Set MISC_CTRL register
  iommu/mediatek: Move inv_sel_reg into the plat_data
  iommu/mediatek: Add sub_comm id in translation fault
  iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779
  iommu/mediatek: Add mt6779 basic support

 .../bindings/iommu/mediatek,iommu.txt         |   2 +
 drivers/iommu/mtk_iommu.c                     |  92 ++++++--
 drivers/iommu/mtk_iommu.h                     |  10 +-
 include/dt-bindings/memory/mt6779-larb-port.h | 206 ++++++++++++++++++
 4 files changed, 285 insertions(+), 25 deletions(-)

--
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 1/7] dt-bindings: mediatek: Add bindings for MT6779
  2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
@ 2020-06-17  3:00 ` Chao Hao
  2020-06-17  3:00 ` [PATCH v4 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL Chao Hao
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 25+ messages in thread
From: Chao Hao @ 2020-06-17  3:00 UTC (permalink / raw)
  To: Joerg Roedel, Rob Herring, Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	linux-mediatek, linux-arm-kernel

This patch adds description for MT6779 IOMMU.

MT6779 has two iommus, they are mm_iommu and apu_iommu which
both use ARM Short-Descriptor translation format.

In addition, mm_iommu and apu_iommu are two independent HW instance
, we need to set them separately.

The MT6779 IOMMU hardware diagram is as below, it is only a brief
diagram about iommu, it don't focus on the part of smi_larb, so
I don't describe the smi_larb detailedly.

			     EMI
			      |
	   --------------------------------------
	   |					|
        MM_IOMMU                            APU_IOMMU
	   |					|
       SMI_COMMOM-----------		     APU_BUS
          |		   |			|
    SMI_LARB(0~11)         |	                |
	  |		   |			|
	  |		   |		   --------------
	  |		   |		   |	 |	|
   Multimedia engine	  CCU		  VPU   MDLA   EMDA

All the connections are hardware fixed, software can not adjust it.

Change since v2:
1. Delete unused definition, ex: M4U_LARB12_ID, M4U_LARB13_ID, CCU, VPU, MDLA, EDMA

Change since v1:
1. Delete M4U_PORT_UNKNOWN define because of not use it.
2. Correct coding format: ex: /*larb3-VENC*/ --> /* larb3-VENC */

Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
---
 .../bindings/iommu/mediatek,iommu.txt         |   2 +
 include/dt-bindings/memory/mt6779-larb-port.h | 206 ++++++++++++++++++
 2 files changed, 208 insertions(+)
 create mode 100644 include/dt-bindings/memory/mt6779-larb-port.h

diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
index ce59a505f5a4..c1ccd8582eb2 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
@@ -58,6 +58,7 @@ Required properties:
 - compatible : must be one of the following string:
 	"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
 	"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
+	"mediatek,mt6779-m4u" for mt6779 which uses generation two m4u HW.
 	"mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
 						     generation one m4u HW.
 	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
@@ -78,6 +79,7 @@ Required properties:
 	Specifies the mtk_m4u_id as defined in
 	dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
 	dt-binding/memory/mt2712-larb-port.h for mt2712,
+	dt-binding/memory/mt6779-larb-port.h for mt6779,
 	dt-binding/memory/mt8173-larb-port.h for mt8173, and
 	dt-binding/memory/mt8183-larb-port.h for mt8183.
 
diff --git a/include/dt-bindings/memory/mt6779-larb-port.h b/include/dt-bindings/memory/mt6779-larb-port.h
new file mode 100644
index 000000000000..2ad0899fbf2f
--- /dev/null
+++ b/include/dt-bindings/memory/mt6779-larb-port.h
@@ -0,0 +1,206 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Chao Hao <chao.hao@mediatek.com>
+ */
+
+#ifndef _DTS_IOMMU_PORT_MT6779_H_
+#define _DTS_IOMMU_PORT_MT6779_H_
+
+#define MTK_M4U_ID(larb, port)		 (((larb) << 5) | (port))
+
+#define M4U_LARB0_ID			 0
+#define M4U_LARB1_ID			 1
+#define M4U_LARB2_ID			 2
+#define M4U_LARB3_ID			 3
+#define M4U_LARB4_ID			 4
+#define M4U_LARB5_ID			 5
+#define M4U_LARB6_ID			 6
+#define M4U_LARB7_ID			 7
+#define M4U_LARB8_ID			 8
+#define M4U_LARB9_ID			 9
+#define M4U_LARB10_ID			 10
+#define M4U_LARB11_ID			 11
+
+/* larb0 */
+#define M4U_PORT_DISP_POSTMASK0		 MTK_M4U_ID(M4U_LARB0_ID, 0)
+#define M4U_PORT_DISP_OVL0_HDR		 MTK_M4U_ID(M4U_LARB0_ID, 1)
+#define M4U_PORT_DISP_OVL1_HDR		 MTK_M4U_ID(M4U_LARB0_ID, 2)
+#define M4U_PORT_DISP_OVL0		 MTK_M4U_ID(M4U_LARB0_ID, 3)
+#define M4U_PORT_DISP_OVL1		 MTK_M4U_ID(M4U_LARB0_ID, 4)
+#define M4U_PORT_DISP_PVRIC0		 MTK_M4U_ID(M4U_LARB0_ID, 5)
+#define M4U_PORT_DISP_RDMA0		 MTK_M4U_ID(M4U_LARB0_ID, 6)
+#define M4U_PORT_DISP_WDMA0		 MTK_M4U_ID(M4U_LARB0_ID, 7)
+#define M4U_PORT_DISP_FAKE0		 MTK_M4U_ID(M4U_LARB0_ID, 8)
+
+/* larb1 */
+#define M4U_PORT_DISP_OVL0_2L_HDR	 MTK_M4U_ID(M4U_LARB1_ID, 0)
+#define M4U_PORT_DISP_OVL1_2L_HDR	 MTK_M4U_ID(M4U_LARB1_ID, 1)
+#define M4U_PORT_DISP_OVL0_2L		 MTK_M4U_ID(M4U_LARB1_ID, 2)
+#define M4U_PORT_DISP_OVL1_2L		 MTK_M4U_ID(M4U_LARB1_ID, 3)
+#define M4U_PORT_DISP_RDMA1		 MTK_M4U_ID(M4U_LARB1_ID, 4)
+#define M4U_PORT_MDP_PVRIC0		 MTK_M4U_ID(M4U_LARB1_ID, 5)
+#define M4U_PORT_MDP_PVRIC1		 MTK_M4U_ID(M4U_LARB1_ID, 6)
+#define M4U_PORT_MDP_RDMA0		 MTK_M4U_ID(M4U_LARB1_ID, 7)
+#define M4U_PORT_MDP_RDMA1		 MTK_M4U_ID(M4U_LARB1_ID, 8)
+#define M4U_PORT_MDP_WROT0_R		 MTK_M4U_ID(M4U_LARB1_ID, 9)
+#define M4U_PORT_MDP_WROT0_W		 MTK_M4U_ID(M4U_LARB1_ID, 10)
+#define M4U_PORT_MDP_WROT1_R		 MTK_M4U_ID(M4U_LARB1_ID, 11)
+#define M4U_PORT_MDP_WROT1_W		 MTK_M4U_ID(M4U_LARB1_ID, 12)
+#define M4U_PORT_DISP_FAKE1		 MTK_M4U_ID(M4U_LARB1_ID, 13)
+
+/* larb2-VDEC */
+#define M4U_PORT_HW_VDEC_MC_EXT          MTK_M4U_ID(M4U_LARB2_ID, 0)
+#define M4U_PORT_HW_VDEC_UFO_EXT         MTK_M4U_ID(M4U_LARB2_ID, 1)
+#define M4U_PORT_HW_VDEC_PP_EXT          MTK_M4U_ID(M4U_LARB2_ID, 2)
+#define M4U_PORT_HW_VDEC_PRED_RD_EXT     MTK_M4U_ID(M4U_LARB2_ID, 3)
+#define M4U_PORT_HW_VDEC_PRED_WR_EXT     MTK_M4U_ID(M4U_LARB2_ID, 4)
+#define M4U_PORT_HW_VDEC_PPWRAP_EXT      MTK_M4U_ID(M4U_LARB2_ID, 5)
+#define M4U_PORT_HW_VDEC_TILE_EXT        MTK_M4U_ID(M4U_LARB2_ID, 6)
+#define M4U_PORT_HW_VDEC_VLD_EXT         MTK_M4U_ID(M4U_LARB2_ID, 7)
+#define M4U_PORT_HW_VDEC_VLD2_EXT        MTK_M4U_ID(M4U_LARB2_ID, 8)
+#define M4U_PORT_HW_VDEC_AVC_MV_EXT      MTK_M4U_ID(M4U_LARB2_ID, 9)
+#define M4U_PORT_HW_VDEC_UFO_ENC_EXT     MTK_M4U_ID(M4U_LARB2_ID, 10)
+#define M4U_PORT_HW_VDEC_RG_CTRL_DMA_EXT MTK_M4U_ID(M4U_LARB2_ID, 11)
+
+/* larb3-VENC */
+#define M4U_PORT_VENC_RCPU		 MTK_M4U_ID(M4U_LARB3_ID, 0)
+#define M4U_PORT_VENC_REC		 MTK_M4U_ID(M4U_LARB3_ID, 1)
+#define M4U_PORT_VENC_BSDMA		 MTK_M4U_ID(M4U_LARB3_ID, 2)
+#define M4U_PORT_VENC_SV_COMV		 MTK_M4U_ID(M4U_LARB3_ID, 3)
+#define M4U_PORT_VENC_RD_COMV		 MTK_M4U_ID(M4U_LARB3_ID, 4)
+#define M4U_PORT_VENC_NBM_RDMA		 MTK_M4U_ID(M4U_LARB3_ID, 5)
+#define M4U_PORT_VENC_NBM_RDMA_LITE	 MTK_M4U_ID(M4U_LARB3_ID, 6)
+#define M4U_PORT_JPGENC_Y_RDMA		 MTK_M4U_ID(M4U_LARB3_ID, 7)
+#define M4U_PORT_JPGENC_C_RDMA		 MTK_M4U_ID(M4U_LARB3_ID, 8)
+#define M4U_PORT_JPGENC_Q_TABLE		 MTK_M4U_ID(M4U_LARB3_ID, 9)
+#define M4U_PORT_JPGENC_BSDMA		 MTK_M4U_ID(M4U_LARB3_ID, 10)
+#define M4U_PORT_JPGDEC_WDMA		 MTK_M4U_ID(M4U_LARB3_ID, 11)
+#define M4U_PORT_JPGDEC_BSDMA		 MTK_M4U_ID(M4U_LARB3_ID, 12)
+#define M4U_PORT_VENC_NBM_WDMA		 MTK_M4U_ID(M4U_LARB3_ID, 13)
+#define M4U_PORT_VENC_NBM_WDMA_LITE	 MTK_M4U_ID(M4U_LARB3_ID, 14)
+#define M4U_PORT_VENC_CUR_LUMA		 MTK_M4U_ID(M4U_LARB3_ID, 15)
+#define M4U_PORT_VENC_CUR_CHROMA	 MTK_M4U_ID(M4U_LARB3_ID, 16)
+#define M4U_PORT_VENC_REF_LUMA		 MTK_M4U_ID(M4U_LARB3_ID, 17)
+#define M4U_PORT_VENC_REF_CHROMA	 MTK_M4U_ID(M4U_LARB3_ID, 18)
+
+/* larb4-dummy */
+
+/* larb5-IMG */
+#define M4U_PORT_IMGI_D1		 MTK_M4U_ID(M4U_LARB5_ID, 0)
+#define M4U_PORT_IMGBI_D1		 MTK_M4U_ID(M4U_LARB5_ID, 1)
+#define M4U_PORT_DMGI_D1		 MTK_M4U_ID(M4U_LARB5_ID, 2)
+#define M4U_PORT_DEPI_D1		 MTK_M4U_ID(M4U_LARB5_ID, 3)
+#define M4U_PORT_LCEI_D1		 MTK_M4U_ID(M4U_LARB5_ID, 4)
+#define M4U_PORT_SMTI_D1		 MTK_M4U_ID(M4U_LARB5_ID, 5)
+#define M4U_PORT_SMTO_D2		 MTK_M4U_ID(M4U_LARB5_ID, 6)
+#define M4U_PORT_SMTO_D1		 MTK_M4U_ID(M4U_LARB5_ID, 7)
+#define M4U_PORT_CRZO_D1		 MTK_M4U_ID(M4U_LARB5_ID, 8)
+#define M4U_PORT_IMG3O_D1		 MTK_M4U_ID(M4U_LARB5_ID, 9)
+#define M4U_PORT_VIPI_D1		 MTK_M4U_ID(M4U_LARB5_ID, 10)
+#define M4U_PORT_WPE_RDMA1		 MTK_M4U_ID(M4U_LARB5_ID, 11)
+#define M4U_PORT_WPE_RDMA0		 MTK_M4U_ID(M4U_LARB5_ID, 12)
+#define M4U_PORT_WPE_WDMA		 MTK_M4U_ID(M4U_LARB5_ID, 13)
+#define M4U_PORT_TIMGO_D1		 MTK_M4U_ID(M4U_LARB5_ID, 14)
+#define M4U_PORT_MFB_RDMA0		 MTK_M4U_ID(M4U_LARB5_ID, 15)
+#define M4U_PORT_MFB_RDMA1		 MTK_M4U_ID(M4U_LARB5_ID, 16)
+#define M4U_PORT_MFB_RDMA2		 MTK_M4U_ID(M4U_LARB5_ID, 17)
+#define M4U_PORT_MFB_RDMA3		 MTK_M4U_ID(M4U_LARB5_ID, 18)
+#define M4U_PORT_MFB_WDMA		 MTK_M4U_ID(M4U_LARB5_ID, 19)
+#define M4U_PORT_RESERVE1		 MTK_M4U_ID(M4U_LARB5_ID, 20)
+#define M4U_PORT_RESERVE2		 MTK_M4U_ID(M4U_LARB5_ID, 21)
+#define M4U_PORT_RESERVE3		 MTK_M4U_ID(M4U_LARB5_ID, 22)
+#define M4U_PORT_RESERVE4		 MTK_M4U_ID(M4U_LARB5_ID, 23)
+#define M4U_PORT_RESERVE5		 MTK_M4U_ID(M4U_LARB5_ID, 24)
+#define M4U_PORT_RESERVE6		 MTK_M4U_ID(M4U_LARB5_ID, 25)
+
+/* larb6-IMG-VPU */
+#define M4U_PORT_IMG_IPUO		 MTK_M4U_ID(M4U_LARB6_ID, 0)
+#define M4U_PORT_IMG_IPU3O		 MTK_M4U_ID(M4U_LARB6_ID, 1)
+#define M4U_PORT_IMG_IPUI		 MTK_M4U_ID(M4U_LARB6_ID, 2)
+
+/* larb7-DVS */
+#define M4U_PORT_DVS_RDMA		 MTK_M4U_ID(M4U_LARB7_ID, 0)
+#define M4U_PORT_DVS_WDMA		 MTK_M4U_ID(M4U_LARB7_ID, 1)
+#define M4U_PORT_DVP_RDMA		 MTK_M4U_ID(M4U_LARB7_ID, 2)
+#define M4U_PORT_DVP_WDMA		 MTK_M4U_ID(M4U_LARB7_ID, 3)
+
+/* larb8-IPESYS */
+#define M4U_PORT_FDVT_RDA		 MTK_M4U_ID(M4U_LARB8_ID, 0)
+#define M4U_PORT_FDVT_RDB		 MTK_M4U_ID(M4U_LARB8_ID, 1)
+#define M4U_PORT_FDVT_WRA		 MTK_M4U_ID(M4U_LARB8_ID, 2)
+#define M4U_PORT_FDVT_WRB		 MTK_M4U_ID(M4U_LARB8_ID, 3)
+#define M4U_PORT_FE_RD0			 MTK_M4U_ID(M4U_LARB8_ID, 4)
+#define M4U_PORT_FE_RD1			 MTK_M4U_ID(M4U_LARB8_ID, 5)
+#define M4U_PORT_FE_WR0			 MTK_M4U_ID(M4U_LARB8_ID, 6)
+#define M4U_PORT_FE_WR1			 MTK_M4U_ID(M4U_LARB8_ID, 7)
+#define M4U_PORT_RSC_RDMA0		 MTK_M4U_ID(M4U_LARB8_ID, 8)
+#define M4U_PORT_RSC_WDMA		 MTK_M4U_ID(M4U_LARB8_ID, 9)
+
+/* larb9-CAM */
+#define M4U_PORT_CAM_IMGO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 0)
+#define M4U_PORT_CAM_RRZO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 1)
+#define M4U_PORT_CAM_LSCI_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 2)
+#define M4U_PORT_CAM_BPCI_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 3)
+#define M4U_PORT_CAM_YUVO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 4)
+#define M4U_PORT_CAM_UFDI_R2_C		 MTK_M4U_ID(M4U_LARB9_ID, 5)
+#define M4U_PORT_CAM_RAWI_R2_C		 MTK_M4U_ID(M4U_LARB9_ID, 6)
+#define M4U_PORT_CAM_RAWI_R5_C		 MTK_M4U_ID(M4U_LARB9_ID, 7)
+#define M4U_PORT_CAM_CAMSV_1		 MTK_M4U_ID(M4U_LARB9_ID, 8)
+#define M4U_PORT_CAM_CAMSV_2		 MTK_M4U_ID(M4U_LARB9_ID, 9)
+#define M4U_PORT_CAM_CAMSV_3		 MTK_M4U_ID(M4U_LARB9_ID, 10)
+#define M4U_PORT_CAM_CAMSV_4		 MTK_M4U_ID(M4U_LARB9_ID, 11)
+#define M4U_PORT_CAM_CAMSV_5		 MTK_M4U_ID(M4U_LARB9_ID, 12)
+#define M4U_PORT_CAM_CAMSV_6		 MTK_M4U_ID(M4U_LARB9_ID, 13)
+#define M4U_PORT_CAM_AAO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 14)
+#define M4U_PORT_CAM_AFO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 15)
+#define M4U_PORT_CAM_FLKO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 16)
+#define M4U_PORT_CAM_LCESO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 17)
+#define M4U_PORT_CAM_CRZO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 18)
+#define M4U_PORT_CAM_LTMSO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 19)
+#define M4U_PORT_CAM_RSSO_R1_C		 MTK_M4U_ID(M4U_LARB9_ID, 20)
+#define M4U_PORT_CAM_CCUI		 MTK_M4U_ID(M4U_LARB9_ID, 21)
+#define M4U_PORT_CAM_CCUO		 MTK_M4U_ID(M4U_LARB9_ID, 22)
+#define M4U_PORT_CAM_FAKE		 MTK_M4U_ID(M4U_LARB9_ID, 23)
+
+/* larb10-CAM_A */
+#define M4U_PORT_CAM_IMGO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 0)
+#define M4U_PORT_CAM_RRZO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 1)
+#define M4U_PORT_CAM_LSCI_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 2)
+#define M4U_PORT_CAM_BPCI_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 3)
+#define M4U_PORT_CAM_YUVO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 4)
+#define M4U_PORT_CAM_UFDI_R2_A		 MTK_M4U_ID(M4U_LARB10_ID, 5)
+#define M4U_PORT_CAM_RAWI_R2_A		 MTK_M4U_ID(M4U_LARB10_ID, 6)
+#define M4U_PORT_CAM_RAWI_R5_A		 MTK_M4U_ID(M4U_LARB10_ID, 7)
+#define M4U_PORT_CAM_IMGO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 8)
+#define M4U_PORT_CAM_RRZO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 9)
+#define M4U_PORT_CAM_LSCI_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 10)
+#define M4U_PORT_CAM_BPCI_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 11)
+#define M4U_PORT_CAM_YUVO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 12)
+#define M4U_PORT_CAM_UFDI_R2_B		 MTK_M4U_ID(M4U_LARB10_ID, 13)
+#define M4U_PORT_CAM_RAWI_R2_B		 MTK_M4U_ID(M4U_LARB10_ID, 14)
+#define M4U_PORT_CAM_RAWI_R5_B		 MTK_M4U_ID(M4U_LARB10_ID, 15)
+#define M4U_PORT_CAM_CAMSV_0		 MTK_M4U_ID(M4U_LARB10_ID, 16)
+#define M4U_PORT_CAM_AAO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 17)
+#define M4U_PORT_CAM_AFO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 18)
+#define M4U_PORT_CAM_FLKO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 19)
+#define M4U_PORT_CAM_LCESO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 20)
+#define M4U_PORT_CAM_CRZO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 21)
+#define M4U_PORT_CAM_AAO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 22)
+#define M4U_PORT_CAM_AFO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 23)
+#define M4U_PORT_CAM_FLKO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 24)
+#define M4U_PORT_CAM_LCESO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 25)
+#define M4U_PORT_CAM_CRZO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 26)
+#define M4U_PORT_CAM_LTMSO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 27)
+#define M4U_PORT_CAM_RSSO_R1_A		 MTK_M4U_ID(M4U_LARB10_ID, 28)
+#define M4U_PORT_CAM_LTMSO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 29)
+#define M4U_PORT_CAM_RSSO_R1_B		 MTK_M4U_ID(M4U_LARB10_ID, 30)
+
+/* larb11-CAM-VPU */
+#define M4U_PORT_CAM_IPUO		 MTK_M4U_ID(M4U_LARB11_ID, 0)
+#define M4U_PORT_CAM_IPU2O		 MTK_M4U_ID(M4U_LARB11_ID, 1)
+#define M4U_PORT_CAM_IPU3O		 MTK_M4U_ID(M4U_LARB11_ID, 2)
+#define M4U_PORT_CAM_IPUI		 MTK_M4U_ID(M4U_LARB11_ID, 3)
+#define M4U_PORT_CAM_IPU2I		 MTK_M4U_ID(M4U_LARB11_ID, 4)
+
+#endif
-- 
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL
  2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
  2020-06-17  3:00 ` [PATCH v4 1/7] dt-bindings: mediatek: Add bindings for MT6779 Chao Hao
@ 2020-06-17  3:00 ` Chao Hao
  2020-06-17  9:04   ` Matthias Brugger
  2020-06-17  3:00 ` [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register Chao Hao
                   ` (4 subsequent siblings)
  6 siblings, 1 reply; 25+ messages in thread
From: Chao Hao @ 2020-06-17  3:00 UTC (permalink / raw)
  To: Joerg Roedel, Rob Herring, Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	linux-mediatek, linux-arm-kernel

For iommu offset=0x48 register, only the previous mt8173/mt8183 use the
name STANDARD_AXI_MODE, all the latest SoC extend the register more
feature by different bits, for example: axi_mode, in_order_en, coherent_en
and so on. So rename REG_MMU_MISC_CTRL may be more proper.

This patch only rename the register name, no functional change.

Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 14 +++++++-------
 drivers/iommu/mtk_iommu.h |  2 +-
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 2be96f1cdbd2..88d3df5b91c2 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -41,7 +41,7 @@
 #define F_INVLD_EN0				BIT(0)
 #define F_INVLD_EN1				BIT(1)
 
-#define REG_MMU_STANDARD_AXI_MODE		0x048
+#define REG_MMU_MISC_CTRL			0x048
 #define REG_MMU_DCM_DIS				0x050
 
 #define REG_MMU_CTRL_REG			0x110
@@ -573,8 +573,10 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 	}
 	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
 
-	if (data->plat_data->reset_axi)
-		writel_relaxed(0, data->base + REG_MMU_STANDARD_AXI_MODE);
+	if (data->plat_data->reset_axi) {
+		/* The register is called STANDARD_AXI_MODE in this case */
+		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
+	}
 
 	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
 			     dev_name(data->dev), (void *)data)) {
@@ -718,8 +720,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
 	struct mtk_iommu_suspend_reg *reg = &data->reg;
 	void __iomem *base = data->base;
 
-	reg->standard_axi_mode = readl_relaxed(base +
-					       REG_MMU_STANDARD_AXI_MODE);
+	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
 	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
 	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
 	reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
@@ -743,8 +744,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 		dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
 		return ret;
 	}
-	writel_relaxed(reg->standard_axi_mode,
-		       base + REG_MMU_STANDARD_AXI_MODE);
+	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
 	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
 	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
 	writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index ea949a324e33..1b6ea839b92c 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -18,7 +18,7 @@
 #include <soc/mediatek/smi.h>
 
 struct mtk_iommu_suspend_reg {
-	u32				standard_axi_mode;
+	u32				misc_ctrl;
 	u32				dcm_dis;
 	u32				ctrl_reg;
 	u32				int_control0;
-- 
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register
  2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
  2020-06-17  3:00 ` [PATCH v4 1/7] dt-bindings: mediatek: Add bindings for MT6779 Chao Hao
  2020-06-17  3:00 ` [PATCH v4 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL Chao Hao
@ 2020-06-17  3:00 ` Chao Hao
  2020-06-17  9:34   ` Matthias Brugger
  2020-06-17  3:00 ` [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data Chao Hao
                   ` (3 subsequent siblings)
  6 siblings, 1 reply; 25+ messages in thread
From: Chao Hao @ 2020-06-17  3:00 UTC (permalink / raw)
  To: Joerg Roedel, Rob Herring, Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	linux-mediatek, linux-arm-kernel

Add F_MMU_IN_ORDER_WR_EN definition in MISC_CTRL.
In order to improve performance, we always disable STANDARD_AXI_MODE
and IN_ORDER_WR_EN in MISC_CTRL.

Change since v3:
1. Rename Disable STANDARD_AXI_MODE in MISC_CTRL to Set MISC_CTRL register
2. Add F_MMU_IN_DRDER_WR_EN definition in MISC_CTRL
       We need to disable in_order_write to improve performance

Cc: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 11 +++++++++++
 drivers/iommu/mtk_iommu.h |  1 +
 2 files changed, 12 insertions(+)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 88d3df5b91c2..239d2cdbbc9f 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -42,6 +42,9 @@
 #define F_INVLD_EN1				BIT(1)
 
 #define REG_MMU_MISC_CTRL			0x048
+#define F_MMU_IN_ORDER_WR_EN			(BIT(1) | BIT(17))
+#define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
+
 #define REG_MMU_DCM_DIS				0x050
 
 #define REG_MMU_CTRL_REG			0x110
@@ -578,6 +581,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
 	}
 
+	if (data->plat_data->has_misc_ctrl) {
+		/* For mm_iommu, it can improve performance by the setting */
+		regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
+		regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
+		regval &= ~F_MMU_IN_ORDER_WR_EN;
+		writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
+	}
+
 	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
 			     dev_name(data->dev), (void *)data)) {
 		writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 1b6ea839b92c..d711ac630037 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
 
 	/* HW will use the EMI clock if there isn't the "bclk". */
 	bool                has_bclk;
+	bool		    has_misc_ctrl;
 	bool                has_vld_pa_rng;
 	bool                reset_axi;
 	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
-- 
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data
  2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
                   ` (2 preceding siblings ...)
  2020-06-17  3:00 ` [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register Chao Hao
@ 2020-06-17  3:00 ` Chao Hao
  2020-06-17  9:09   ` Matthias Brugger
  2020-06-17  3:00 ` [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault Chao Hao
                   ` (2 subsequent siblings)
  6 siblings, 1 reply; 25+ messages in thread
From: Chao Hao @ 2020-06-17  3:00 UTC (permalink / raw)
  To: Joerg Roedel, Rob Herring, Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	linux-mediatek, linux-arm-kernel

For mt6779, MMU_INV_SEL register's offset is changed from
0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
use it.
In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
before mt6779.

Change since v3:
1. Fix coding style

Cc: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 19 +++++++++++--------
 drivers/iommu/mtk_iommu.h |  1 +
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 239d2cdbbc9f..f23919feba4e 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -37,7 +37,7 @@
 #define REG_MMU_INVLD_START_A			0x024
 #define REG_MMU_INVLD_END_A			0x028
 
-#define REG_MMU_INV_SEL				0x038
+#define REG_MMU_INV_SEL_GEN1			0x038
 #define F_INVLD_EN0				BIT(0)
 #define F_INVLD_EN1				BIT(1)
 
@@ -168,7 +168,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
 
 	for_each_m4u(data) {
 		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
-			       data->base + REG_MMU_INV_SEL);
+			       data->base + data->plat_data->inv_sel_reg);
 		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
 		wmb(); /* Make sure the tlb flush all done */
 	}
@@ -185,7 +185,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
 	for_each_m4u(data) {
 		spin_lock_irqsave(&data->tlb_lock, flags);
 		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
-			       data->base + REG_MMU_INV_SEL);
+			       data->base + data->plat_data->inv_sel_reg);
 
 		writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
 		writel_relaxed(iova + size - 1,
@@ -773,11 +773,12 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
 };
 
 static const struct mtk_iommu_plat_data mt2712_data = {
-	.m4u_plat     = M4U_MT2712,
-	.has_4gb_mode = true,
-	.has_bclk     = true,
-	.has_vld_pa_rng   = true,
-	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.m4u_plat       = M4U_MT2712,
+	.has_4gb_mode   = true,
+	.has_bclk       = true,
+	.has_vld_pa_rng = true,
+	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
+	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
 };
 
 static const struct mtk_iommu_plat_data mt8173_data = {
@@ -785,12 +786,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
 	.has_4gb_mode = true,
 	.has_bclk     = true,
 	.reset_axi    = true,
+	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
 	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
 };
 
 static const struct mtk_iommu_plat_data mt8183_data = {
 	.m4u_plat     = M4U_MT8183,
 	.reset_axi    = true,
+	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
 	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
 };
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index d711ac630037..afd7a2de5c1e 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
 	bool		    has_misc_ctrl;
 	bool                has_vld_pa_rng;
 	bool                reset_axi;
+	u32                 inv_sel_reg;
 	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
 };
 
-- 
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault
  2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
                   ` (3 preceding siblings ...)
  2020-06-17  3:00 ` [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data Chao Hao
@ 2020-06-17  3:00 ` Chao Hao
  2020-06-17  9:17   ` Matthias Brugger
  2020-06-17  3:00 ` [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779 Chao Hao
  2020-06-17  3:00 ` [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support Chao Hao
  6 siblings, 1 reply; 25+ messages in thread
From: Chao Hao @ 2020-06-17  3:00 UTC (permalink / raw)
  To: Joerg Roedel, Rob Herring, Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	linux-mediatek, linux-arm-kernel

The max larb number that a iommu HW support is 8(larb0~larb7 in the below
diagram).
If the larb's number is over 8, we use a sub_common for merging
several larbs into one larb. At this case, we will extend larb_id:
bit[11:9] means common-id;
bit[8:7] means subcommon-id;
From these two variable, we could get the real larb number when
translation fault happen.
The diagram is as below:
		 EMI
		  |
		IOMMU
		  |
           -----------------
	   |               |
	common1   	common0
	   |		   |
	   -----------------
		  |
             smi common
		  |
  ------------------------------------
  |       |       |       |     |    |
 3'd0    3'd1    3'd2    3'd3  ...  3'd7   <-common_id(max is 8)
  |       |       |       |     |    |
Larb0   Larb1     |     Larb3  ... Larb7
		  |
	    smi sub common
		  |
     --------------------------
     |        |       |       |
    2'd0     2'd1    2'd2    2'd3   <-sub_common_id(max is 4)
     |        |       |       |
   Larb8    Larb9   Larb10  Larb11

In this patch we extern larb_remap[] to larb_remap[8][4] for this.
larb_remap[x][y]: x mean common-id above, y means subcommon_id above.

We can also distinguish if the M4U HW has sub_common by has_sub_comm
property.

Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 20 +++++++++++++-------
 drivers/iommu/mtk_iommu.h |  3 ++-
 2 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index f23919feba4e..a687e8db0e51 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -91,6 +91,8 @@
 #define REG_MMU1_INVLD_PA			0x148
 #define REG_MMU0_INT_ID				0x150
 #define REG_MMU1_INT_ID				0x154
+#define F_MMU_INT_ID_COMM_ID(a)			(((a) >> 9) & 0x7)
+#define F_MMU_INT_ID_SUB_COMM_ID(a)		(((a) >> 7) & 0x3)
 #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
 #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
 
@@ -229,7 +231,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	struct mtk_iommu_data *data = dev_id;
 	struct mtk_iommu_domain *dom = data->m4u_dom;
 	u32 int_state, regval, fault_iova, fault_pa;
-	unsigned int fault_larb, fault_port;
+	unsigned int fault_larb, fault_port, sub_comm = 0;
 	bool layer, write;
 
 	/* Read error info from registers */
@@ -245,10 +247,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	}
 	layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
 	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
-	fault_larb = F_MMU_INT_ID_LARB_ID(regval);
 	fault_port = F_MMU_INT_ID_PORT_ID(regval);
-
-	fault_larb = data->plat_data->larbid_remap[fault_larb];
+	if (data->plat_data->has_sub_comm) {
+		fault_larb = F_MMU_INT_ID_COMM_ID(regval);
+		sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
+	} else {
+		fault_larb = F_MMU_INT_ID_LARB_ID(regval);
+	}
+	fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
 
 	if (report_iommu_fault(&dom->domain, data->dev, fault_iova,
 			       write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
@@ -778,7 +784,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
 	.has_bclk       = true,
 	.has_vld_pa_rng = true,
 	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
-	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
 };
 
 static const struct mtk_iommu_plat_data mt8173_data = {
@@ -787,14 +793,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
 	.has_bclk     = true,
 	.reset_axi    = true,
 	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
-	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
+	.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
 };
 
 static const struct mtk_iommu_plat_data mt8183_data = {
 	.m4u_plat     = M4U_MT8183,
 	.reset_axi    = true,
 	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
-	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
+	.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
 };
 
 static const struct of_device_id mtk_iommu_of_ids[] = {
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index afd7a2de5c1e..d51ff99c2c71 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -41,10 +41,11 @@ struct mtk_iommu_plat_data {
 	/* HW will use the EMI clock if there isn't the "bclk". */
 	bool                has_bclk;
 	bool		    has_misc_ctrl;
+	bool		    has_sub_comm;
 	bool                has_vld_pa_rng;
 	bool                reset_axi;
 	u32                 inv_sel_reg;
-	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
+	unsigned char       larbid_remap[8][4];
 };
 
 struct mtk_iommu_domain;
-- 
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779
  2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
                   ` (4 preceding siblings ...)
  2020-06-17  3:00 ` [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault Chao Hao
@ 2020-06-17  3:00 ` Chao Hao
  2020-06-17  9:22   ` Matthias Brugger
  2020-06-17  3:00 ` [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support Chao Hao
  6 siblings, 1 reply; 25+ messages in thread
From: Chao Hao @ 2020-06-17  3:00 UTC (permalink / raw)
  To: Joerg Roedel, Rob Herring, Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	linux-mediatek, linux-arm-kernel

Some platforms(ex: mt6779) have a new register called by REG_MMU_WR_LEN
to improve performance.
This patch add this register definition.

Signed-off-by: Chao Hao <chao.hao@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 10 ++++++++++
 drivers/iommu/mtk_iommu.h |  2 ++
 2 files changed, 12 insertions(+)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index a687e8db0e51..c706bca6487e 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -46,6 +46,8 @@
 #define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
 
 #define REG_MMU_DCM_DIS				0x050
+#define REG_MMU_WR_LEN				0x054
+#define F_MMU_WR_THROT_DIS_BIT			(BIT(5) |  BIT(21))
 
 #define REG_MMU_CTRL_REG			0x110
 #define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
@@ -581,6 +583,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 		writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG);
 	}
 	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
+	if (data->plat_data->has_wr_len) {
+		/* write command throttling mode */
+		regval = readl_relaxed(data->base + REG_MMU_WR_LEN);
+		regval &= ~F_MMU_WR_THROT_DIS_BIT;
+		writel_relaxed(regval, data->base + REG_MMU_WR_LEN);
+	}
 
 	if (data->plat_data->reset_axi) {
 		/* The register is called STANDARD_AXI_MODE in this case */
@@ -737,6 +745,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
 	struct mtk_iommu_suspend_reg *reg = &data->reg;
 	void __iomem *base = data->base;
 
+	reg->wr_len = readl_relaxed(base + REG_MMU_WR_LEN);
 	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
 	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
 	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
@@ -761,6 +770,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 		dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
 		return ret;
 	}
+	writel_relaxed(reg->wr_len, base + REG_MMU_WR_LEN);
 	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
 	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
 	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index d51ff99c2c71..9971cedd72ea 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -25,6 +25,7 @@ struct mtk_iommu_suspend_reg {
 	u32				int_main_control;
 	u32				ivrp_paddr;
 	u32				vld_pa_rng;
+	u32				wr_len;
 };
 
 enum mtk_iommu_plat {
@@ -43,6 +44,7 @@ struct mtk_iommu_plat_data {
 	bool		    has_misc_ctrl;
 	bool		    has_sub_comm;
 	bool                has_vld_pa_rng;
+	bool                has_wr_len;
 	bool                reset_axi;
 	u32                 inv_sel_reg;
 	unsigned char       larbid_remap[8][4];
-- 
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support
  2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
                   ` (5 preceding siblings ...)
  2020-06-17  3:00 ` [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779 Chao Hao
@ 2020-06-17  3:00 ` Chao Hao
  2020-06-17  9:33   ` Matthias Brugger
  6 siblings, 1 reply; 25+ messages in thread
From: Chao Hao @ 2020-06-17  3:00 UTC (permalink / raw)
  To: Joerg Roedel, Rob Herring, Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	linux-mediatek, linux-arm-kernel

1. Start from mt6779, INVLDT_SEL move to offset=0x2c, so we add
   REG_MMU_INV_SEL_GEN2 definition and mt6779 uses it.
2. Change PROTECT_PA_ALIGN from 128 byte to 256 byte.
3. For REG_MMU_CTRL_REG register, we only need to change bit[2:0],
   others bits keep default value, ex: enable victim tlb.
4. Add mt6779_data to support mm_iommu HW init.

Change since v3:
1. When setting MMU_CTRL_REG, we don't need to include mt8173.

Cc: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 20 ++++++++++++++++++--
 drivers/iommu/mtk_iommu.h |  1 +
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index c706bca6487e..def2e996683f 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -37,6 +37,11 @@
 #define REG_MMU_INVLD_START_A			0x024
 #define REG_MMU_INVLD_END_A			0x028
 
+/* In latest Coda, MMU_INV_SEL's offset is changed to 0x02c.
+ * So we named offset = 0x02c to "REG_MMU_INV_SEL_GEN2"
+ * and offset = 0x038 to "REG_MMU_INV_SEL_GEN1".
+ */
+#define REG_MMU_INV_SEL_GEN2			0x02c
 #define REG_MMU_INV_SEL_GEN1			0x038
 #define F_INVLD_EN0				BIT(0)
 #define F_INVLD_EN1				BIT(1)
@@ -98,7 +103,7 @@
 #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
 #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
 
-#define MTK_PROTECT_PA_ALIGN			128
+#define MTK_PROTECT_PA_ALIGN			256
 
 /*
  * Get the local arbiter ID and the portid within the larb arbiter
@@ -543,11 +548,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 		return ret;
 	}
 
+	regval = readl_relaxed(data->base + REG_MMU_CTRL_REG);
 	if (data->plat_data->m4u_plat == M4U_MT8173)
 		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
 			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
 	else
-		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
+		regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
 	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
 
 	regval = F_L2_MULIT_HIT_EN |
@@ -797,6 +803,15 @@ static const struct mtk_iommu_plat_data mt2712_data = {
 	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
 };
 
+static const struct mtk_iommu_plat_data mt6779_data = {
+	.m4u_plat      = M4U_MT6779,
+	.has_sub_comm  = true,
+	.has_wr_len    = true,
+	.has_misc_ctrl = true,
+	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
+	.larbid_remap  = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
+};
+
 static const struct mtk_iommu_plat_data mt8173_data = {
 	.m4u_plat     = M4U_MT8173,
 	.has_4gb_mode = true,
@@ -815,6 +830,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
 
 static const struct of_device_id mtk_iommu_of_ids[] = {
 	{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
+	{ .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
 	{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
 	{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
 	{}
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 9971cedd72ea..fb79e710c8d9 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -31,6 +31,7 @@ struct mtk_iommu_suspend_reg {
 enum mtk_iommu_plat {
 	M4U_MT2701,
 	M4U_MT2712,
+	M4U_MT6779,
 	M4U_MT8173,
 	M4U_MT8183,
 };
-- 
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL
  2020-06-17  3:00 ` [PATCH v4 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL Chao Hao
@ 2020-06-17  9:04   ` Matthias Brugger
  0 siblings, 0 replies; 25+ messages in thread
From: Matthias Brugger @ 2020-06-17  9:04 UTC (permalink / raw)
  To: Chao Hao, Joerg Roedel, Rob Herring
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	linux-mediatek, linux-arm-kernel



On 17/06/2020 05:00, Chao Hao wrote:
> For iommu offset=0x48 register, only the previous mt8173/mt8183 use the
> name STANDARD_AXI_MODE, all the latest SoC extend the register more
> feature by different bits, for example: axi_mode, in_order_en, coherent_en
> and so on. So rename REG_MMU_MISC_CTRL may be more proper.
> 
> This patch only rename the register name, no functional change.
> 
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> Reviewed-by: Yong Wu <yong.wu@mediatek.com>

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/iommu/mtk_iommu.c | 14 +++++++-------
>  drivers/iommu/mtk_iommu.h |  2 +-
>  2 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 2be96f1cdbd2..88d3df5b91c2 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -41,7 +41,7 @@
>  #define F_INVLD_EN0				BIT(0)
>  #define F_INVLD_EN1				BIT(1)
>  
> -#define REG_MMU_STANDARD_AXI_MODE		0x048
> +#define REG_MMU_MISC_CTRL			0x048
>  #define REG_MMU_DCM_DIS				0x050
>  
>  #define REG_MMU_CTRL_REG			0x110
> @@ -573,8 +573,10 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>  	}
>  	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
>  
> -	if (data->plat_data->reset_axi)
> -		writel_relaxed(0, data->base + REG_MMU_STANDARD_AXI_MODE);
> +	if (data->plat_data->reset_axi) {
> +		/* The register is called STANDARD_AXI_MODE in this case */
> +		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
> +	}
>  
>  	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
>  			     dev_name(data->dev), (void *)data)) {
> @@ -718,8 +720,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
>  	struct mtk_iommu_suspend_reg *reg = &data->reg;
>  	void __iomem *base = data->base;
>  
> -	reg->standard_axi_mode = readl_relaxed(base +
> -					       REG_MMU_STANDARD_AXI_MODE);
> +	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
>  	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
>  	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
>  	reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
> @@ -743,8 +744,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
>  		dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
>  		return ret;
>  	}
> -	writel_relaxed(reg->standard_axi_mode,
> -		       base + REG_MMU_STANDARD_AXI_MODE);
> +	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
>  	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
>  	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
>  	writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index ea949a324e33..1b6ea839b92c 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -18,7 +18,7 @@
>  #include <soc/mediatek/smi.h>
>  
>  struct mtk_iommu_suspend_reg {
> -	u32				standard_axi_mode;
> +	u32				misc_ctrl;
>  	u32				dcm_dis;
>  	u32				ctrl_reg;
>  	u32				int_control0;
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data
  2020-06-17  3:00 ` [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data Chao Hao
@ 2020-06-17  9:09   ` Matthias Brugger
  0 siblings, 0 replies; 25+ messages in thread
From: Matthias Brugger @ 2020-06-17  9:09 UTC (permalink / raw)
  To: Chao Hao, Joerg Roedel, Rob Herring
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	linux-mediatek, linux-arm-kernel



On 17/06/2020 05:00, Chao Hao wrote:
> For mt6779, MMU_INV_SEL register's offset is changed from
> 0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
> use it.
> In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
> before mt6779.
> 
> Change since v3:
> 1. Fix coding style
> 
> Cc: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>

Reviewed-by: Mattias Brugger <matthias.bgg@gmail.com>

> ---
>  drivers/iommu/mtk_iommu.c | 19 +++++++++++--------
>  drivers/iommu/mtk_iommu.h |  1 +
>  2 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 239d2cdbbc9f..f23919feba4e 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -37,7 +37,7 @@
>  #define REG_MMU_INVLD_START_A			0x024
>  #define REG_MMU_INVLD_END_A			0x028
>  
> -#define REG_MMU_INV_SEL				0x038
> +#define REG_MMU_INV_SEL_GEN1			0x038
>  #define F_INVLD_EN0				BIT(0)
>  #define F_INVLD_EN1				BIT(1)
>  
> @@ -168,7 +168,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
>  
>  	for_each_m4u(data) {
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  		writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
>  		wmb(); /* Make sure the tlb flush all done */
>  	}
> @@ -185,7 +185,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
>  	for_each_m4u(data) {
>  		spin_lock_irqsave(&data->tlb_lock, flags);
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> -			       data->base + REG_MMU_INV_SEL);
> +			       data->base + data->plat_data->inv_sel_reg);
>  
>  		writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
>  		writel_relaxed(iova + size - 1,
> @@ -773,11 +773,12 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
>  };
>  
>  static const struct mtk_iommu_plat_data mt2712_data = {
> -	.m4u_plat     = M4U_MT2712,
> -	.has_4gb_mode = true,
> -	.has_bclk     = true,
> -	.has_vld_pa_rng   = true,
> -	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> +	.m4u_plat       = M4U_MT2712,
> +	.has_4gb_mode   = true,
> +	.has_bclk       = true,
> +	.has_vld_pa_rng = true,
> +	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
> +	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
>  };
>  
>  static const struct mtk_iommu_plat_data mt8173_data = {
> @@ -785,12 +786,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
>  	.has_4gb_mode = true,
>  	.has_bclk     = true,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
>  };
>  
>  static const struct mtk_iommu_plat_data mt8183_data = {
>  	.m4u_plat     = M4U_MT8183,
>  	.reset_axi    = true,
> +	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
>  	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
>  };
>  
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index d711ac630037..afd7a2de5c1e 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -43,6 +43,7 @@ struct mtk_iommu_plat_data {
>  	bool		    has_misc_ctrl;
>  	bool                has_vld_pa_rng;
>  	bool                reset_axi;
> +	u32                 inv_sel_reg;
>  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
>  };
>  
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault
  2020-06-17  3:00 ` [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault Chao Hao
@ 2020-06-17  9:17   ` Matthias Brugger
  2020-06-17 11:11     ` Yong Wu
  0 siblings, 1 reply; 25+ messages in thread
From: Matthias Brugger @ 2020-06-17  9:17 UTC (permalink / raw)
  To: Chao Hao, Joerg Roedel, Rob Herring
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	linux-mediatek, linux-arm-kernel



On 17/06/2020 05:00, Chao Hao wrote:
> The max larb number that a iommu HW support is 8(larb0~larb7 in the below
> diagram).
> If the larb's number is over 8, we use a sub_common for merging
> several larbs into one larb. At this case, we will extend larb_id:
> bit[11:9] means common-id;
> bit[8:7] means subcommon-id;
> From these two variable, we could get the real larb number when
> translation fault happen.
> The diagram is as below:
> 		 EMI
> 		  |
> 		IOMMU
> 		  |
>            -----------------
> 	   |               |
> 	common1   	common0
> 	   |		   |
> 	   -----------------
> 		  |
>              smi common
> 		  |
>   ------------------------------------
>   |       |       |       |     |    |
>  3'd0    3'd1    3'd2    3'd3  ...  3'd7   <-common_id(max is 8)
>   |       |       |       |     |    |
> Larb0   Larb1     |     Larb3  ... Larb7
> 		  |
> 	    smi sub common
> 		  |
>      --------------------------
>      |        |       |       |
>     2'd0     2'd1    2'd2    2'd3   <-sub_common_id(max is 4)
>      |        |       |       |
>    Larb8    Larb9   Larb10  Larb11
> 
> In this patch we extern larb_remap[] to larb_remap[8][4] for this.

extern -> extend

> larb_remap[x][y]: x mean common-id above, y means subcommon_id above.

mean -> means

> 
> We can also distinguish if the M4U HW has sub_common by has_sub_comm
> property.
> 
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> Reviewed-by: Yong Wu <yong.wu@mediatek.com>
> ---
>  drivers/iommu/mtk_iommu.c | 20 +++++++++++++-------
>  drivers/iommu/mtk_iommu.h |  3 ++-
>  2 files changed, 15 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index f23919feba4e..a687e8db0e51 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -91,6 +91,8 @@
>  #define REG_MMU1_INVLD_PA			0x148
>  #define REG_MMU0_INT_ID				0x150
>  #define REG_MMU1_INT_ID				0x154
> +#define F_MMU_INT_ID_COMM_ID(a)			(((a) >> 9) & 0x7)
> +#define F_MMU_INT_ID_SUB_COMM_ID(a)		(((a) >> 7) & 0x3)
>  #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
>  #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
>  
> @@ -229,7 +231,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
>  	struct mtk_iommu_data *data = dev_id;
>  	struct mtk_iommu_domain *dom = data->m4u_dom;
>  	u32 int_state, regval, fault_iova, fault_pa;
> -	unsigned int fault_larb, fault_port;
> +	unsigned int fault_larb, fault_port, sub_comm = 0;
>  	bool layer, write;
>  
>  	/* Read error info from registers */
> @@ -245,10 +247,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
>  	}
>  	layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
>  	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
> -	fault_larb = F_MMU_INT_ID_LARB_ID(regval);
>  	fault_port = F_MMU_INT_ID_PORT_ID(regval);
> -
> -	fault_larb = data->plat_data->larbid_remap[fault_larb];
> +	if (data->plat_data->has_sub_comm) {
> +		fault_larb = F_MMU_INT_ID_COMM_ID(regval);
> +		sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
> +	} else {
> +		fault_larb = F_MMU_INT_ID_LARB_ID(regval);
> +	}
> +	fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
>  
>  	if (report_iommu_fault(&dom->domain, data->dev, fault_iova,
>  			       write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
> @@ -778,7 +784,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
>  	.has_bclk       = true,
>  	.has_vld_pa_rng = true,
>  	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
> -	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> +	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
>  };
>  
>  static const struct mtk_iommu_plat_data mt8173_data = {
> @@ -787,14 +793,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
>  	.has_bclk     = true,
>  	.reset_axi    = true,
>  	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> -	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
> +	.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
>  };
>  
>  static const struct mtk_iommu_plat_data mt8183_data = {
>  	.m4u_plat     = M4U_MT8183,
>  	.reset_axi    = true,
>  	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> -	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
> +	.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
>  };
>  
>  static const struct of_device_id mtk_iommu_of_ids[] = {
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index afd7a2de5c1e..d51ff99c2c71 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -41,10 +41,11 @@ struct mtk_iommu_plat_data {
>  	/* HW will use the EMI clock if there isn't the "bclk". */
>  	bool                has_bclk;
>  	bool		    has_misc_ctrl;
> +	bool		    has_sub_comm;
>  	bool                has_vld_pa_rng;
>  	bool                reset_axi;
>  	u32                 inv_sel_reg;
> -	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
> +	unsigned char       larbid_remap[8][4];

MTK_LARB_NR_MAX is 16, why do you decrease it to 8?
Should we use a define for the subcommon as well?

Regards,
Matthias

>  };
>  
>  struct mtk_iommu_domain;
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779
  2020-06-17  3:00 ` [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779 Chao Hao
@ 2020-06-17  9:22   ` Matthias Brugger
  2020-06-19 10:56     ` chao hao
  0 siblings, 1 reply; 25+ messages in thread
From: Matthias Brugger @ 2020-06-17  9:22 UTC (permalink / raw)
  To: Chao Hao, Joerg Roedel, Rob Herring
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	linux-mediatek, linux-arm-kernel



On 17/06/2020 05:00, Chao Hao wrote:
> Some platforms(ex: mt6779) have a new register called by REG_MMU_WR_LEN
> to improve performance.
> This patch add this register definition.

Please be more specific what this register is about.

> 
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> ---
>  drivers/iommu/mtk_iommu.c | 10 ++++++++++
>  drivers/iommu/mtk_iommu.h |  2 ++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index a687e8db0e51..c706bca6487e 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -46,6 +46,8 @@
>  #define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
>  
>  #define REG_MMU_DCM_DIS				0x050
> +#define REG_MMU_WR_LEN				0x054
> +#define F_MMU_WR_THROT_DIS_BIT			(BIT(5) |  BIT(21))
>  
>  #define REG_MMU_CTRL_REG			0x110
>  #define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
> @@ -581,6 +583,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>  		writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG);
>  	}
>  	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
> +	if (data->plat_data->has_wr_len) {
> +		/* write command throttling mode */
> +		regval = readl_relaxed(data->base + REG_MMU_WR_LEN);
> +		regval &= ~F_MMU_WR_THROT_DIS_BIT;
> +		writel_relaxed(regval, data->base + REG_MMU_WR_LEN);
> +	}
>  
>  	if (data->plat_data->reset_axi) {
>  		/* The register is called STANDARD_AXI_MODE in this case */
> @@ -737,6 +745,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
>  	struct mtk_iommu_suspend_reg *reg = &data->reg;
>  	void __iomem *base = data->base;
>  
> +	reg->wr_len = readl_relaxed(base + REG_MMU_WR_LEN);

Can we read/write the register without any side effect although hardware has not
implemented it (!has_wr_len)?


>  	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
>  	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
>  	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
> @@ -761,6 +770,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
>  		dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
>  		return ret;
>  	}
> +	writel_relaxed(reg->wr_len, base + REG_MMU_WR_LEN);
>  	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
>  	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
>  	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index d51ff99c2c71..9971cedd72ea 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -25,6 +25,7 @@ struct mtk_iommu_suspend_reg {
>  	u32				int_main_control;
>  	u32				ivrp_paddr;
>  	u32				vld_pa_rng;
> +	u32				wr_len;
>  };
>  
>  enum mtk_iommu_plat {
> @@ -43,6 +44,7 @@ struct mtk_iommu_plat_data {
>  	bool		    has_misc_ctrl;
>  	bool		    has_sub_comm;
>  	bool                has_vld_pa_rng;
> +	bool                has_wr_len;

Given the fact that we are adding more and more plat_data bool values, I think
it would make sense to use a u32 flags register and add the appropriate macro
definitions to set and check for a flag present.

Regards,
Matthias

>  	bool                reset_axi;
>  	u32                 inv_sel_reg;
>  	unsigned char       larbid_remap[8][4];
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support
  2020-06-17  3:00 ` [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support Chao Hao
@ 2020-06-17  9:33   ` Matthias Brugger
  2020-06-18 11:54     ` chao hao
  0 siblings, 1 reply; 25+ messages in thread
From: Matthias Brugger @ 2020-06-17  9:33 UTC (permalink / raw)
  To: Chao Hao, Joerg Roedel, Rob Herring
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	linux-mediatek, linux-arm-kernel



On 17/06/2020 05:00, Chao Hao wrote:
> 1. Start from mt6779, INVLDT_SEL move to offset=0x2c, so we add
>    REG_MMU_INV_SEL_GEN2 definition and mt6779 uses it.
> 2. Change PROTECT_PA_ALIGN from 128 byte to 256 byte.
> 3. For REG_MMU_CTRL_REG register, we only need to change bit[2:0],
>    others bits keep default value, ex: enable victim tlb.
> 4. Add mt6779_data to support mm_iommu HW init.
> 
> Change since v3:
> 1. When setting MMU_CTRL_REG, we don't need to include mt8173.
> 
> Cc: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> ---
>  drivers/iommu/mtk_iommu.c | 20 ++++++++++++++++++--
>  drivers/iommu/mtk_iommu.h |  1 +
>  2 files changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index c706bca6487e..def2e996683f 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -37,6 +37,11 @@
>  #define REG_MMU_INVLD_START_A			0x024
>  #define REG_MMU_INVLD_END_A			0x028
>  
> +/* In latest Coda, MMU_INV_SEL's offset is changed to 0x02c.
> + * So we named offset = 0x02c to "REG_MMU_INV_SEL_GEN2"
> + * and offset = 0x038 to "REG_MMU_INV_SEL_GEN1".
> + */

Please delete the comment, this should be understandable from the git history

> +#define REG_MMU_INV_SEL_GEN2			0x02c
>  #define REG_MMU_INV_SEL_GEN1			0x038
>  #define F_INVLD_EN0				BIT(0)
>  #define F_INVLD_EN1				BIT(1)
> @@ -98,7 +103,7 @@
>  #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
>  #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
>  
> -#define MTK_PROTECT_PA_ALIGN			128
> +#define MTK_PROTECT_PA_ALIGN			256

Do we need 512 bytes for all gen2 IOMMUs?
I'm not sure if we should add this in plat_data or if we should just bump up the
value for all SoCs.
In both cases this should be a separate patch.

>  
>  /*
>   * Get the local arbiter ID and the portid within the larb arbiter
> @@ -543,11 +548,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>  		return ret;
>  	}
>  
> +	regval = readl_relaxed(data->base + REG_MMU_CTRL_REG);
>  	if (data->plat_data->m4u_plat == M4U_MT8173)
>  		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
>  			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
>  	else
> -		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
> +		regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;

Why do we change this, is it that the bootloader for mt6779 set some values in
the register we have to keep? In this case I think we should update the regval
accordingly.

>  	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
>  
>  	regval = F_L2_MULIT_HIT_EN |
> @@ -797,6 +803,15 @@ static const struct mtk_iommu_plat_data mt2712_data = {
>  	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
>  };
>  
> +static const struct mtk_iommu_plat_data mt6779_data = {
> +	.m4u_plat      = M4U_MT6779,
> +	.has_sub_comm  = true,
> +	.has_wr_len    = true,
> +	.has_misc_ctrl = true,
> +	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
> +	.larbid_remap  = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
> +};
> +
>  static const struct mtk_iommu_plat_data mt8173_data = {
>  	.m4u_plat     = M4U_MT8173,
>  	.has_4gb_mode = true,
> @@ -815,6 +830,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
>  
>  static const struct of_device_id mtk_iommu_of_ids[] = {
>  	{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
> +	{ .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
>  	{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
>  	{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
>  	{}
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index 9971cedd72ea..fb79e710c8d9 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -31,6 +31,7 @@ struct mtk_iommu_suspend_reg {
>  enum mtk_iommu_plat {
>  	M4U_MT2701,
>  	M4U_MT2712,
> +	M4U_MT6779,
>  	M4U_MT8173,
>  	M4U_MT8183,
>  };
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register
  2020-06-17  3:00 ` [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register Chao Hao
@ 2020-06-17  9:34   ` Matthias Brugger
  2020-06-18 11:49     ` chao hao
  0 siblings, 1 reply; 25+ messages in thread
From: Matthias Brugger @ 2020-06-17  9:34 UTC (permalink / raw)
  To: Chao Hao, Joerg Roedel, Rob Herring
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	linux-mediatek, linux-arm-kernel



On 17/06/2020 05:00, Chao Hao wrote:
> Add F_MMU_IN_ORDER_WR_EN definition in MISC_CTRL.
> In order to improve performance, we always disable STANDARD_AXI_MODE
> and IN_ORDER_WR_EN in MISC_CTRL.
> 
> Change since v3:

The changelog should go below the '---' as we don't want this in the git history
once the patch get's accepted.

> 1. Rename Disable STANDARD_AXI_MODE in MISC_CTRL to Set MISC_CTRL register
> 2. Add F_MMU_IN_DRDER_WR_EN definition in MISC_CTRL
>        We need to disable in_order_write to improve performance
> 
> Cc: Yong Wu <yong.wu@mediatek.com>
> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> ---
>  drivers/iommu/mtk_iommu.c | 11 +++++++++++
>  drivers/iommu/mtk_iommu.h |  1 +
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 88d3df5b91c2..239d2cdbbc9f 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -42,6 +42,9 @@
>  #define F_INVLD_EN1				BIT(1)
>  
>  #define REG_MMU_MISC_CTRL			0x048
> +#define F_MMU_IN_ORDER_WR_EN			(BIT(1) | BIT(17))
> +#define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> +
>  #define REG_MMU_DCM_DIS				0x050
>  
>  #define REG_MMU_CTRL_REG			0x110
> @@ -578,6 +581,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>  		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
>  	}
>  
> +	if (data->plat_data->has_misc_ctrl) {

That's confusing. We renamed the register to misc_ctrl, but it's present in all
SoCs. We should find a better name for this flag to describe what the hardware
supports.

Regards,
Matthias

> +		/* For mm_iommu, it can improve performance by the setting */
> +		regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> +		regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
> +		regval &= ~F_MMU_IN_ORDER_WR_EN;
> +		writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
> +	}
> +
>  	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
>  			     dev_name(data->dev), (void *)data)) {
>  		writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index 1b6ea839b92c..d711ac630037 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
>  
>  	/* HW will use the EMI clock if there isn't the "bclk". */
>  	bool                has_bclk;
> +	bool		    has_misc_ctrl;
>  	bool                has_vld_pa_rng;
>  	bool                reset_axi;
>  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault
  2020-06-17  9:17   ` Matthias Brugger
@ 2020-06-17 11:11     ` Yong Wu
  2020-06-18 11:44       ` chao hao
  0 siblings, 1 reply; 25+ messages in thread
From: Yong Wu @ 2020-06-17 11:11 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	Rob Herring, linux-mediatek, linux-arm-kernel

Hi Matthias,

Thanks very much for your review.

On Wed, 2020-06-17 at 11:17 +0200, Matthias Brugger wrote:
> 
> On 17/06/2020 05:00, Chao Hao wrote:
> > The max larb number that a iommu HW support is 8(larb0~larb7 in the below
> > diagram).
> > If the larb's number is over 8, we use a sub_common for merging
> > several larbs into one larb. At this case, we will extend larb_id:
> > bit[11:9] means common-id;
> > bit[8:7] means subcommon-id;
> > From these two variable, we could get the real larb number when
> > translation fault happen.
> > The diagram is as below:
> > 		 EMI
> > 		  |
> > 		IOMMU
> > 		  |
> >            -----------------
> > 	   |               |
> > 	common1   	common0
> > 	   |		   |
> > 	   -----------------
> > 		  |
> >              smi common
> > 		  |
> >   ------------------------------------
> >   |       |       |       |     |    |
> >  3'd0    3'd1    3'd2    3'd3  ...  3'd7   <-common_id(max is 8)
> >   |       |       |       |     |    |
> > Larb0   Larb1     |     Larb3  ... Larb7
> > 		  |
> > 	    smi sub common
> > 		  |
> >      --------------------------
> >      |        |       |       |
> >     2'd0     2'd1    2'd2    2'd3   <-sub_common_id(max is 4)
> >      |        |       |       |
> >    Larb8    Larb9   Larb10  Larb11
> > 
> > In this patch we extern larb_remap[] to larb_remap[8][4] for this.
> 
> extern -> extend
> 
> > larb_remap[x][y]: x mean common-id above, y means subcommon_id above.
> 
> mean -> means
> 
> > 
> > We can also distinguish if the M4U HW has sub_common by has_sub_comm
> > property.
> > 
> > Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> > Reviewed-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> >  drivers/iommu/mtk_iommu.c | 20 +++++++++++++-------
> >  drivers/iommu/mtk_iommu.h |  3 ++-
> >  2 files changed, 15 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index f23919feba4e..a687e8db0e51 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -91,6 +91,8 @@
> >  #define REG_MMU1_INVLD_PA			0x148
> >  #define REG_MMU0_INT_ID				0x150
> >  #define REG_MMU1_INT_ID				0x154
> > +#define F_MMU_INT_ID_COMM_ID(a)			(((a) >> 9) & 0x7)
> > +#define F_MMU_INT_ID_SUB_COMM_ID(a)		(((a) >> 7) & 0x3)
> >  #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
> >  #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
> >  
> > @@ -229,7 +231,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
> >  	struct mtk_iommu_data *data = dev_id;
> >  	struct mtk_iommu_domain *dom = data->m4u_dom;
> >  	u32 int_state, regval, fault_iova, fault_pa;
> > -	unsigned int fault_larb, fault_port;
> > +	unsigned int fault_larb, fault_port, sub_comm = 0;
> >  	bool layer, write;
> >  
> >  	/* Read error info from registers */
> > @@ -245,10 +247,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
> >  	}
> >  	layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
> >  	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
> > -	fault_larb = F_MMU_INT_ID_LARB_ID(regval);
> >  	fault_port = F_MMU_INT_ID_PORT_ID(regval);
> > -
> > -	fault_larb = data->plat_data->larbid_remap[fault_larb];
> > +	if (data->plat_data->has_sub_comm) {
> > +		fault_larb = F_MMU_INT_ID_COMM_ID(regval);
> > +		sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
> > +	} else {
> > +		fault_larb = F_MMU_INT_ID_LARB_ID(regval);
> > +	}
> > +	fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
> >  
> >  	if (report_iommu_fault(&dom->domain, data->dev, fault_iova,
> >  			       write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
> > @@ -778,7 +784,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
> >  	.has_bclk       = true,
> >  	.has_vld_pa_rng = true,
> >  	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
> > -	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> > +	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
> >  };
> >  
> >  static const struct mtk_iommu_plat_data mt8173_data = {
> > @@ -787,14 +793,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
> >  	.has_bclk     = true,
> >  	.reset_axi    = true,
> >  	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> > -	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
> > +	.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
> >  };
> >  
> >  static const struct mtk_iommu_plat_data mt8183_data = {
> >  	.m4u_plat     = M4U_MT8183,
> >  	.reset_axi    = true,
> >  	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> > -	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
> > +	.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
> >  };
> >  
> >  static const struct of_device_id mtk_iommu_of_ids[] = {
> > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > index afd7a2de5c1e..d51ff99c2c71 100644
> > --- a/drivers/iommu/mtk_iommu.h
> > +++ b/drivers/iommu/mtk_iommu.h
> > @@ -41,10 +41,11 @@ struct mtk_iommu_plat_data {
> >  	/* HW will use the EMI clock if there isn't the "bclk". */
> >  	bool                has_bclk;
> >  	bool		    has_misc_ctrl;
> > +	bool		    has_sub_comm;
> >  	bool                has_vld_pa_rng;
> >  	bool                reset_axi;
> >  	u32                 inv_sel_reg;
> > -	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
> > +	unsigned char       larbid_remap[8][4];
> 
> MTK_LARB_NR_MAX is 16, why do you decrease it to 8?

From the diagram above, the max number of the larbs that could connected
with a IOMMU HW is 8. thus, 8 is right here for each a IOMMU HW.

as I commented when v3. mt2712 have the larbs over 8 since it has 2
IOMMU HWes.

and MTK_LARB_NR_MAX means the max larbs number that this SoC support.
Keep its value as is.


> Should we use a define for the subcommon as well?
> 
> Regards,
> Matthias
> 
> >  };
> >  
> >  struct mtk_iommu_domain;
> > 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault
  2020-06-17 11:11     ` Yong Wu
@ 2020-06-18 11:44       ` chao hao
  0 siblings, 0 replies; 25+ messages in thread
From: chao hao @ 2020-06-18 11:44 UTC (permalink / raw)
  To: Yong Wu
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	Rob Herring, linux-mediatek, Matthias Brugger, linux-arm-kernel

On Wed, 2020-06-17 at 19:11 +0800, Yong Wu wrote:
> Hi Matthias,
> 
> Thanks very much for your review.
> 
> On Wed, 2020-06-17 at 11:17 +0200, Matthias Brugger wrote:
> > 
> > On 17/06/2020 05:00, Chao Hao wrote:
> > > The max larb number that a iommu HW support is 8(larb0~larb7 in the below
> > > diagram).
> > > If the larb's number is over 8, we use a sub_common for merging
> > > several larbs into one larb. At this case, we will extend larb_id:
> > > bit[11:9] means common-id;
> > > bit[8:7] means subcommon-id;
> > > From these two variable, we could get the real larb number when
> > > translation fault happen.
> > > The diagram is as below:
> > > 		 EMI
> > > 		  |
> > > 		IOMMU
> > > 		  |
> > >            -----------------
> > > 	   |               |
> > > 	common1   	common0
> > > 	   |		   |
> > > 	   -----------------
> > > 		  |
> > >              smi common
> > > 		  |
> > >   ------------------------------------
> > >   |       |       |       |     |    |
> > >  3'd0    3'd1    3'd2    3'd3  ...  3'd7   <-common_id(max is 8)
> > >   |       |       |       |     |    |
> > > Larb0   Larb1     |     Larb3  ... Larb7
> > > 		  |
> > > 	    smi sub common
> > > 		  |
> > >      --------------------------
> > >      |        |       |       |
> > >     2'd0     2'd1    2'd2    2'd3   <-sub_common_id(max is 4)
> > >      |        |       |       |
> > >    Larb8    Larb9   Larb10  Larb11
> > > 
> > > In this patch we extern larb_remap[] to larb_remap[8][4] for this.
> > 
> > extern -> extend
> > 
> > > larb_remap[x][y]: x mean common-id above, y means subcommon_id above.
> > 
> > mean -> means
> > 
> > > 
> > > We can also distinguish if the M4U HW has sub_common by has_sub_comm
> > > property.
> > > 
> > > Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> > > Reviewed-by: Yong Wu <yong.wu@mediatek.com>
> > > ---
> > >  drivers/iommu/mtk_iommu.c | 20 +++++++++++++-------
> > >  drivers/iommu/mtk_iommu.h |  3 ++-
> > >  2 files changed, 15 insertions(+), 8 deletions(-)
> > > 
> > > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > > index f23919feba4e..a687e8db0e51 100644
> > > --- a/drivers/iommu/mtk_iommu.c
> > > +++ b/drivers/iommu/mtk_iommu.c
> > > @@ -91,6 +91,8 @@
> > >  #define REG_MMU1_INVLD_PA			0x148
> > >  #define REG_MMU0_INT_ID				0x150
> > >  #define REG_MMU1_INT_ID				0x154
> > > +#define F_MMU_INT_ID_COMM_ID(a)			(((a) >> 9) & 0x7)
> > > +#define F_MMU_INT_ID_SUB_COMM_ID(a)		(((a) >> 7) & 0x3)
> > >  #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
> > >  #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
> > >  
> > > @@ -229,7 +231,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
> > >  	struct mtk_iommu_data *data = dev_id;
> > >  	struct mtk_iommu_domain *dom = data->m4u_dom;
> > >  	u32 int_state, regval, fault_iova, fault_pa;
> > > -	unsigned int fault_larb, fault_port;
> > > +	unsigned int fault_larb, fault_port, sub_comm = 0;
> > >  	bool layer, write;
> > >  
> > >  	/* Read error info from registers */
> > > @@ -245,10 +247,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
> > >  	}
> > >  	layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
> > >  	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
> > > -	fault_larb = F_MMU_INT_ID_LARB_ID(regval);
> > >  	fault_port = F_MMU_INT_ID_PORT_ID(regval);
> > > -
> > > -	fault_larb = data->plat_data->larbid_remap[fault_larb];
> > > +	if (data->plat_data->has_sub_comm) {
> > > +		fault_larb = F_MMU_INT_ID_COMM_ID(regval);
> > > +		sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
> > > +	} else {
> > > +		fault_larb = F_MMU_INT_ID_LARB_ID(regval);
> > > +	}
> > > +	fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
> > >  
> > >  	if (report_iommu_fault(&dom->domain, data->dev, fault_iova,
> > >  			       write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
> > > @@ -778,7 +784,7 @@ static const struct mtk_iommu_plat_data mt2712_data = {
> > >  	.has_bclk       = true,
> > >  	.has_vld_pa_rng = true,
> > >  	.inv_sel_reg    = REG_MMU_INV_SEL_GEN1,
> > > -	.larbid_remap   = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> > > +	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
> > >  };
> > >  
> > >  static const struct mtk_iommu_plat_data mt8173_data = {
> > > @@ -787,14 +793,14 @@ static const struct mtk_iommu_plat_data mt8173_data = {
> > >  	.has_bclk     = true,
> > >  	.reset_axi    = true,
> > >  	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> > > -	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
> > > +	.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
> > >  };
> > >  
> > >  static const struct mtk_iommu_plat_data mt8183_data = {
> > >  	.m4u_plat     = M4U_MT8183,
> > >  	.reset_axi    = true,
> > >  	.inv_sel_reg  = REG_MMU_INV_SEL_GEN1,
> > > -	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
> > > +	.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
> > >  };
> > >  
> > >  static const struct of_device_id mtk_iommu_of_ids[] = {
> > > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > > index afd7a2de5c1e..d51ff99c2c71 100644
> > > --- a/drivers/iommu/mtk_iommu.h
> > > +++ b/drivers/iommu/mtk_iommu.h
> > > @@ -41,10 +41,11 @@ struct mtk_iommu_plat_data {
> > >  	/* HW will use the EMI clock if there isn't the "bclk". */
> > >  	bool                has_bclk;
> > >  	bool		    has_misc_ctrl;
> > > +	bool		    has_sub_comm;
> > >  	bool                has_vld_pa_rng;
> > >  	bool                reset_axi;
> > >  	u32                 inv_sel_reg;
> > > -	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
> > > +	unsigned char       larbid_remap[8][4];
> > 
> > MTK_LARB_NR_MAX is 16, why do you decrease it to 8?
> 
> From the diagram above, the max number of the larbs that could connected
> with a IOMMU HW is 8. thus, 8 is right here for each a IOMMU HW.
> 
> as I commented when v3. mt2712 have the larbs over 8 since it has 2
> IOMMU HWes.
> 
> and MTK_LARB_NR_MAX means the max larbs number that this SoC support.
> Keep its value as is.
> 
> 
> > Should we use a define for the subcommon as well?
> > 
> > Regards,
> > Matthias
> >

Hi Matthias and yong,
Thanks very much for your review.
HW diagram is as belove and whether we need to use macro definitions to
show it, maybe more clearer? like this:
 
#define LARB_COMMON_MAX             8
#define LARB_SUB_COMMON_MAX         4
unsigned char    larbid_remap[LARB_COMMON_MAX][LARB_SUB_COMMON_MAX];

>  
> > >  };
> > >  
> > >  struct mtk_iommu_domain;
> > > 
> 
> 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register
  2020-06-17  9:34   ` Matthias Brugger
@ 2020-06-18 11:49     ` chao hao
  2020-06-20  2:03       ` Yong Wu
  0 siblings, 1 reply; 25+ messages in thread
From: chao hao @ 2020-06-18 11:49 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	Rob Herring, linux-mediatek, linux-arm-kernel

On Wed, 2020-06-17 at 11:34 +0200, Matthias Brugger wrote:
> 
> On 17/06/2020 05:00, Chao Hao wrote:
> > Add F_MMU_IN_ORDER_WR_EN definition in MISC_CTRL.
> > In order to improve performance, we always disable STANDARD_AXI_MODE
> > and IN_ORDER_WR_EN in MISC_CTRL.
> > 
> > Change since v3:
> 
> The changelog should go below the '---' as we don't want this in the git history
> once the patch get's accepted.
> 
okok, thanks

> > 1. Rename Disable STANDARD_AXI_MODE in MISC_CTRL to Set MISC_CTRL register
> > 2. Add F_MMU_IN_DRDER_WR_EN definition in MISC_CTRL
> >        We need to disable in_order_write to improve performance
> > 
> > Cc: Yong Wu <yong.wu@mediatek.com>
> > Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> > ---
> >  drivers/iommu/mtk_iommu.c | 11 +++++++++++
> >  drivers/iommu/mtk_iommu.h |  1 +
> >  2 files changed, 12 insertions(+)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 88d3df5b91c2..239d2cdbbc9f 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -42,6 +42,9 @@
> >  #define F_INVLD_EN1				BIT(1)
> >  
> >  #define REG_MMU_MISC_CTRL			0x048
> > +#define F_MMU_IN_ORDER_WR_EN			(BIT(1) | BIT(17))
> > +#define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> > +
> >  #define REG_MMU_DCM_DIS				0x050
> >  
> >  #define REG_MMU_CTRL_REG			0x110
> > @@ -578,6 +581,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> >  		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
> >  	}
> >  
> > +	if (data->plat_data->has_misc_ctrl) {
> 
> That's confusing. We renamed the register to misc_ctrl, but it's present in all
> SoCs. We should find a better name for this flag to describe what the hardware
> supports.
> 

ok, thanks for you advice, I will rename it in next version.
ex:has_perf_req(has performance requirement)


> Regards,
> Matthias
> 
> > +		/* For mm_iommu, it can improve performance by the setting */
> > +		regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> > +		regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
> > +		regval &= ~F_MMU_IN_ORDER_WR_EN;
> > +		writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
> > +	}
> > +
> >  	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
> >  			     dev_name(data->dev), (void *)data)) {
> >  		writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
> > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > index 1b6ea839b92c..d711ac630037 100644
> > --- a/drivers/iommu/mtk_iommu.h
> > +++ b/drivers/iommu/mtk_iommu.h
> > @@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
> >  
> >  	/* HW will use the EMI clock if there isn't the "bclk". */
> >  	bool                has_bclk;
> > +	bool		    has_misc_ctrl;
> >  	bool                has_vld_pa_rng;
> >  	bool                reset_axi;
> >  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
> > 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support
  2020-06-17  9:33   ` Matthias Brugger
@ 2020-06-18 11:54     ` chao hao
  2020-06-18 16:00       ` Matthias Brugger
  0 siblings, 1 reply; 25+ messages in thread
From: chao hao @ 2020-06-18 11:54 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	Rob Herring, linux-mediatek, linux-arm-kernel

On Wed, 2020-06-17 at 11:33 +0200, Matthias Brugger wrote:
> 
> On 17/06/2020 05:00, Chao Hao wrote:
> > 1. Start from mt6779, INVLDT_SEL move to offset=0x2c, so we add
> >    REG_MMU_INV_SEL_GEN2 definition and mt6779 uses it.
> > 2. Change PROTECT_PA_ALIGN from 128 byte to 256 byte.
> > 3. For REG_MMU_CTRL_REG register, we only need to change bit[2:0],
> >    others bits keep default value, ex: enable victim tlb.
> > 4. Add mt6779_data to support mm_iommu HW init.
> > 
> > Change since v3:
> > 1. When setting MMU_CTRL_REG, we don't need to include mt8173.
> > 
> > Cc: Yong Wu <yong.wu@mediatek.com>
> > Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> > ---
> >  drivers/iommu/mtk_iommu.c | 20 ++++++++++++++++++--
> >  drivers/iommu/mtk_iommu.h |  1 +
> >  2 files changed, 19 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index c706bca6487e..def2e996683f 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -37,6 +37,11 @@
> >  #define REG_MMU_INVLD_START_A			0x024
> >  #define REG_MMU_INVLD_END_A			0x028
> >  
> > +/* In latest Coda, MMU_INV_SEL's offset is changed to 0x02c.
> > + * So we named offset = 0x02c to "REG_MMU_INV_SEL_GEN2"
> > + * and offset = 0x038 to "REG_MMU_INV_SEL_GEN1".
> > + */
> 
> Please delete the comment, this should be understandable from the git history

ok, thanks

> 
> > +#define REG_MMU_INV_SEL_GEN2			0x02c
> >  #define REG_MMU_INV_SEL_GEN1			0x038
> >  #define F_INVLD_EN0				BIT(0)
> >  #define F_INVLD_EN1				BIT(1)
> > @@ -98,7 +103,7 @@
> >  #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
> >  #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
> >  
> > -#define MTK_PROTECT_PA_ALIGN			128
> > +#define MTK_PROTECT_PA_ALIGN			256
> 
> Do we need 512 bytes for all gen2 IOMMUs?
> I'm not sure if we should add this in plat_data or if we should just bump up the
> value for all SoCs.
> In both cases this should be a separate patch.
> 
From mt6779, MTK_PROTECT_PA_ALIGN is extend to 256 bytes and don't be
changed for a long time from our HW designer comment. The legacy iommu
also can use it, mabye it doesn't set it by platform.


> >  
> >  /*
> >   * Get the local arbiter ID and the portid within the larb arbiter
> > @@ -543,11 +548,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> >  		return ret;
> >  	}
> >  
> > +	regval = readl_relaxed(data->base + REG_MMU_CTRL_REG);
> >  	if (data->plat_data->m4u_plat == M4U_MT8173)
> >  		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
> >  			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
> >  	else
> > -		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
> > +		regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
> 
> Why do we change this, is it that the bootloader for mt6779 set some values in
> the register we have to keep? In this case I think we should update the regval
> accordingly.

For REG_MMU_CTRL_REG, bit[12] represents victim_tlb_en feature and
victim_tlb is enable defaultly(bit[12]=1),but if we use "regval =
F_MMU_TF_PROT_TO_PROGRAM_ADDR", victim_tlb will disable, it will drop
iommu performace for mt6779


> 
> >  	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
> >  
> >  	regval = F_L2_MULIT_HIT_EN |
> > @@ -797,6 +803,15 @@ static const struct mtk_iommu_plat_data mt2712_data = {
> >  	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
> >  };
> >  
> > +static const struct mtk_iommu_plat_data mt6779_data = {
> > +	.m4u_plat      = M4U_MT6779,
> > +	.has_sub_comm  = true,
> > +	.has_wr_len    = true,
> > +	.has_misc_ctrl = true,
> > +	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
> > +	.larbid_remap  = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
> > +};
> > +
> >  static const struct mtk_iommu_plat_data mt8173_data = {
> >  	.m4u_plat     = M4U_MT8173,
> >  	.has_4gb_mode = true,
> > @@ -815,6 +830,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
> >  
> >  static const struct of_device_id mtk_iommu_of_ids[] = {
> >  	{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
> > +	{ .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
> >  	{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
> >  	{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
> >  	{}
> > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > index 9971cedd72ea..fb79e710c8d9 100644
> > --- a/drivers/iommu/mtk_iommu.h
> > +++ b/drivers/iommu/mtk_iommu.h
> > @@ -31,6 +31,7 @@ struct mtk_iommu_suspend_reg {
> >  enum mtk_iommu_plat {
> >  	M4U_MT2701,
> >  	M4U_MT2712,
> > +	M4U_MT6779,
> >  	M4U_MT8173,
> >  	M4U_MT8183,
> >  };
> > 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support
  2020-06-18 11:54     ` chao hao
@ 2020-06-18 16:00       ` Matthias Brugger
  2020-06-19 10:50         ` chao hao
  0 siblings, 1 reply; 25+ messages in thread
From: Matthias Brugger @ 2020-06-18 16:00 UTC (permalink / raw)
  To: chao hao
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	Rob Herring, linux-mediatek, linux-arm-kernel



On 18/06/2020 13:54, chao hao wrote:
> On Wed, 2020-06-17 at 11:33 +0200, Matthias Brugger wrote:
>>
>> On 17/06/2020 05:00, Chao Hao wrote:
>>> 1. Start from mt6779, INVLDT_SEL move to offset=0x2c, so we add
>>>    REG_MMU_INV_SEL_GEN2 definition and mt6779 uses it.
>>> 2. Change PROTECT_PA_ALIGN from 128 byte to 256 byte.
>>> 3. For REG_MMU_CTRL_REG register, we only need to change bit[2:0],
>>>    others bits keep default value, ex: enable victim tlb.
>>> 4. Add mt6779_data to support mm_iommu HW init.
>>>
>>> Change since v3:
>>> 1. When setting MMU_CTRL_REG, we don't need to include mt8173.
>>>
>>> Cc: Yong Wu <yong.wu@mediatek.com>
>>> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
>>> ---
>>>  drivers/iommu/mtk_iommu.c | 20 ++++++++++++++++++--
>>>  drivers/iommu/mtk_iommu.h |  1 +
>>>  2 files changed, 19 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
>>> index c706bca6487e..def2e996683f 100644
>>> --- a/drivers/iommu/mtk_iommu.c
>>> +++ b/drivers/iommu/mtk_iommu.c
>>> @@ -37,6 +37,11 @@
>>>  #define REG_MMU_INVLD_START_A			0x024
>>>  #define REG_MMU_INVLD_END_A			0x028
>>>  
>>> +/* In latest Coda, MMU_INV_SEL's offset is changed to 0x02c.
>>> + * So we named offset = 0x02c to "REG_MMU_INV_SEL_GEN2"
>>> + * and offset = 0x038 to "REG_MMU_INV_SEL_GEN1".
>>> + */
>>
>> Please delete the comment, this should be understandable from the git history
> 
> ok, thanks
> 
>>
>>> +#define REG_MMU_INV_SEL_GEN2			0x02c
>>>  #define REG_MMU_INV_SEL_GEN1			0x038
>>>  #define F_INVLD_EN0				BIT(0)
>>>  #define F_INVLD_EN1				BIT(1)
>>> @@ -98,7 +103,7 @@
>>>  #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
>>>  #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
>>>  
>>> -#define MTK_PROTECT_PA_ALIGN			128
>>> +#define MTK_PROTECT_PA_ALIGN			256
>>
>> Do we need 512 bytes for all gen2 IOMMUs?
>> I'm not sure if we should add this in plat_data or if we should just bump up the
>> value for all SoCs.
>> In both cases this should be a separate patch.
>>
> From mt6779, MTK_PROTECT_PA_ALIGN is extend to 256 bytes and don't be
> changed for a long time from our HW designer comment. The legacy iommu
> also can use it, mabye it doesn't set it by platform.
> 

Ok then just bump it to 256 in a new patch. Thanks for clarification.

> 
>>>  
>>>  /*
>>>   * Get the local arbiter ID and the portid within the larb arbiter
>>> @@ -543,11 +548,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>>>  		return ret;
>>>  	}
>>>  
>>> +	regval = readl_relaxed(data->base + REG_MMU_CTRL_REG);
>>>  	if (data->plat_data->m4u_plat == M4U_MT8173)
>>>  		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
>>>  			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
>>>  	else
>>> -		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
>>> +		regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
>>
>> Why do we change this, is it that the bootloader for mt6779 set some values in
>> the register we have to keep? In this case I think we should update the regval
>> accordingly.
> 
> For REG_MMU_CTRL_REG, bit[12] represents victim_tlb_en feature and
> victim_tlb is enable defaultly(bit[12]=1),but if we use "regval =
> F_MMU_TF_PROT_TO_PROGRAM_ADDR", victim_tlb will disable, it will drop
> iommu performace for mt6779
> 

Got it. Please put that in a separate patch then.

Regards,
Matthias

> 
>>
>>>  	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
>>>  
>>>  	regval = F_L2_MULIT_HIT_EN |
>>> @@ -797,6 +803,15 @@ static const struct mtk_iommu_plat_data mt2712_data = {
>>>  	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
>>>  };
>>>  
>>> +static const struct mtk_iommu_plat_data mt6779_data = {
>>> +	.m4u_plat      = M4U_MT6779,
>>> +	.has_sub_comm  = true,
>>> +	.has_wr_len    = true,
>>> +	.has_misc_ctrl = true,
>>> +	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
>>> +	.larbid_remap  = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
>>> +};
>>> +
>>>  static const struct mtk_iommu_plat_data mt8173_data = {
>>>  	.m4u_plat     = M4U_MT8173,
>>>  	.has_4gb_mode = true,
>>> @@ -815,6 +830,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
>>>  
>>>  static const struct of_device_id mtk_iommu_of_ids[] = {
>>>  	{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
>>> +	{ .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
>>>  	{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
>>>  	{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
>>>  	{}
>>> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
>>> index 9971cedd72ea..fb79e710c8d9 100644
>>> --- a/drivers/iommu/mtk_iommu.h
>>> +++ b/drivers/iommu/mtk_iommu.h
>>> @@ -31,6 +31,7 @@ struct mtk_iommu_suspend_reg {
>>>  enum mtk_iommu_plat {
>>>  	M4U_MT2701,
>>>  	M4U_MT2712,
>>> +	M4U_MT6779,
>>>  	M4U_MT8173,
>>>  	M4U_MT8183,
>>>  };
>>>
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support
  2020-06-18 16:00       ` Matthias Brugger
@ 2020-06-19 10:50         ` chao hao
  0 siblings, 0 replies; 25+ messages in thread
From: chao hao @ 2020-06-19 10:50 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	Rob Herring, linux-mediatek, linux-arm-kernel

On Thu, 2020-06-18 at 18:00 +0200, Matthias Brugger wrote:
> 
> On 18/06/2020 13:54, chao hao wrote:
> > On Wed, 2020-06-17 at 11:33 +0200, Matthias Brugger wrote:
> >>
> >> On 17/06/2020 05:00, Chao Hao wrote:
> >>> 1. Start from mt6779, INVLDT_SEL move to offset=0x2c, so we add
> >>>    REG_MMU_INV_SEL_GEN2 definition and mt6779 uses it.
> >>> 2. Change PROTECT_PA_ALIGN from 128 byte to 256 byte.
> >>> 3. For REG_MMU_CTRL_REG register, we only need to change bit[2:0],
> >>>    others bits keep default value, ex: enable victim tlb.
> >>> 4. Add mt6779_data to support mm_iommu HW init.
> >>>
> >>> Change since v3:
> >>> 1. When setting MMU_CTRL_REG, we don't need to include mt8173.
> >>>
> >>> Cc: Yong Wu <yong.wu@mediatek.com>
> >>> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> >>> ---
> >>>  drivers/iommu/mtk_iommu.c | 20 ++++++++++++++++++--
> >>>  drivers/iommu/mtk_iommu.h |  1 +
> >>>  2 files changed, 19 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> >>> index c706bca6487e..def2e996683f 100644
> >>> --- a/drivers/iommu/mtk_iommu.c
> >>> +++ b/drivers/iommu/mtk_iommu.c
> >>> @@ -37,6 +37,11 @@
> >>>  #define REG_MMU_INVLD_START_A			0x024
> >>>  #define REG_MMU_INVLD_END_A			0x028
> >>>  
> >>> +/* In latest Coda, MMU_INV_SEL's offset is changed to 0x02c.
> >>> + * So we named offset = 0x02c to "REG_MMU_INV_SEL_GEN2"
> >>> + * and offset = 0x038 to "REG_MMU_INV_SEL_GEN1".
> >>> + */
> >>
> >> Please delete the comment, this should be understandable from the git history
> > 
> > ok, thanks
> > 
> >>
> >>> +#define REG_MMU_INV_SEL_GEN2			0x02c
> >>>  #define REG_MMU_INV_SEL_GEN1			0x038
> >>>  #define F_INVLD_EN0				BIT(0)
> >>>  #define F_INVLD_EN1				BIT(1)
> >>> @@ -98,7 +103,7 @@
> >>>  #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
> >>>  #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
> >>>  
> >>> -#define MTK_PROTECT_PA_ALIGN			128
> >>> +#define MTK_PROTECT_PA_ALIGN			256
> >>
> >> Do we need 512 bytes for all gen2 IOMMUs?
> >> I'm not sure if we should add this in plat_data or if we should just bump up the
> >> value for all SoCs.
> >> In both cases this should be a separate patch.
> >>
> > From mt6779, MTK_PROTECT_PA_ALIGN is extend to 256 bytes and don't be
> > changed for a long time from our HW designer comment. The legacy iommu
> > also can use it, mabye it doesn't set it by platform.
> > 
> 
> Ok then just bump it to 256 in a new patch. Thanks for clarification.

  Ok, thanks

> > 
> >>>  
> >>>  /*
> >>>   * Get the local arbiter ID and the portid within the larb arbiter
> >>> @@ -543,11 +548,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> >>>  		return ret;
> >>>  	}
> >>>  
> >>> +	regval = readl_relaxed(data->base + REG_MMU_CTRL_REG);
> >>>  	if (data->plat_data->m4u_plat == M4U_MT8173)
> >>>  		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
> >>>  			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
> >>>  	else
> >>> -		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
> >>> +		regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
> >>
> >> Why do we change this, is it that the bootloader for mt6779 set some values in
> >> the register we have to keep? In this case I think we should update the regval
> >> accordingly.
> > 
> > For REG_MMU_CTRL_REG, bit[12] represents victim_tlb_en feature and
> > victim_tlb is enable defaultly(bit[12]=1),but if we use "regval =
> > F_MMU_TF_PROT_TO_PROGRAM_ADDR", victim_tlb will disable, it will drop
> > iommu performace for mt6779
> > 
> 
> Got it. Please put that in a separate patch then.
> 
  Ok, thanks

> Regards,
> Matthias
> 
> > 
> >>
> >>>  	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
> >>>  
> >>>  	regval = F_L2_MULIT_HIT_EN |
> >>> @@ -797,6 +803,15 @@ static const struct mtk_iommu_plat_data mt2712_data = {
> >>>  	.larbid_remap   = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
> >>>  };
> >>>  
> >>> +static const struct mtk_iommu_plat_data mt6779_data = {
> >>> +	.m4u_plat      = M4U_MT6779,
> >>> +	.has_sub_comm  = true,
> >>> +	.has_wr_len    = true,
> >>> +	.has_misc_ctrl = true,
> >>> +	.inv_sel_reg   = REG_MMU_INV_SEL_GEN2,
> >>> +	.larbid_remap  = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
> >>> +};
> >>> +
> >>>  static const struct mtk_iommu_plat_data mt8173_data = {
> >>>  	.m4u_plat     = M4U_MT8173,
> >>>  	.has_4gb_mode = true,
> >>> @@ -815,6 +830,7 @@ static const struct mtk_iommu_plat_data mt8183_data = {
> >>>  
> >>>  static const struct of_device_id mtk_iommu_of_ids[] = {
> >>>  	{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
> >>> +	{ .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
> >>>  	{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
> >>>  	{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
> >>>  	{}
> >>> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> >>> index 9971cedd72ea..fb79e710c8d9 100644
> >>> --- a/drivers/iommu/mtk_iommu.h
> >>> +++ b/drivers/iommu/mtk_iommu.h
> >>> @@ -31,6 +31,7 @@ struct mtk_iommu_suspend_reg {
> >>>  enum mtk_iommu_plat {
> >>>  	M4U_MT2701,
> >>>  	M4U_MT2712,
> >>> +	M4U_MT6779,
> >>>  	M4U_MT8173,
> >>>  	M4U_MT8183,
> >>>  };
> >>>
> > 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779
  2020-06-17  9:22   ` Matthias Brugger
@ 2020-06-19 10:56     ` chao hao
  2020-06-21 11:01       ` Matthias Brugger
  0 siblings, 1 reply; 25+ messages in thread
From: chao hao @ 2020-06-19 10:56 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	Rob Herring, linux-mediatek, linux-arm-kernel

On Wed, 2020-06-17 at 11:22 +0200, Matthias Brugger wrote:
> 
> On 17/06/2020 05:00, Chao Hao wrote:
> > Some platforms(ex: mt6779) have a new register called by REG_MMU_WR_LEN
> > to improve performance.
> > This patch add this register definition.
> 
> Please be more specific what this register is about.
> 
OK. thanks.
We can use "has_wr_len" flag to control whether we need to set the
register. If the register uses default value, iommu will send command to
EMI without restriction, when the number of commands become more and
more, it will drop the EMI performance. So when more than
ten_commands(default value) don't be handled for EMI, IOMMU will stop
send command to EMI for keeping EMI's performace by enabling write
throttling mechanism(bit[5][21]=0) in MMU_WR_LEN_CTRL register.

I will write description above to commit message in next version

> > 
> > Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> > ---
> >  drivers/iommu/mtk_iommu.c | 10 ++++++++++
> >  drivers/iommu/mtk_iommu.h |  2 ++
> >  2 files changed, 12 insertions(+)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index a687e8db0e51..c706bca6487e 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -46,6 +46,8 @@
> >  #define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> >  
> >  #define REG_MMU_DCM_DIS				0x050
> > +#define REG_MMU_WR_LEN				0x054
> > +#define F_MMU_WR_THROT_DIS_BIT			(BIT(5) |  BIT(21))
> >  
> >  #define REG_MMU_CTRL_REG			0x110
> >  #define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
> > @@ -581,6 +583,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> >  		writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG);
> >  	}
> >  	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
> > +	if (data->plat_data->has_wr_len) {
> > +		/* write command throttling mode */
> > +		regval = readl_relaxed(data->base + REG_MMU_WR_LEN);
> > +		regval &= ~F_MMU_WR_THROT_DIS_BIT;
> > +		writel_relaxed(regval, data->base + REG_MMU_WR_LEN);
> > +	}
> >  
> >  	if (data->plat_data->reset_axi) {
> >  		/* The register is called STANDARD_AXI_MODE in this case */
> > @@ -737,6 +745,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
> >  	struct mtk_iommu_suspend_reg *reg = &data->reg;
> >  	void __iomem *base = data->base;
> >  
> > +	reg->wr_len = readl_relaxed(base + REG_MMU_WR_LEN);
> 
> Can we read/write the register without any side effect although hardware has not
> implemented it (!has_wr_len)?

It doesn't have side effect. Becasue all the MTK platform have the
register for iommu HW. If we need to have requirement for performance,
we can set it by has_wr_len.
But I'm Sorry, the name of flag(has_wr_len) is not exact, I will rename
it in next version, ex: "wr_throt_en"

> 
> 
> >  	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
> >  	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
> >  	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
> > @@ -761,6 +770,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> >  		dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
> >  		return ret;
> >  	}
> > +	writel_relaxed(reg->wr_len, base + REG_MMU_WR_LEN);
> >  	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
> >  	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
> >  	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
> > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > index d51ff99c2c71..9971cedd72ea 100644
> > --- a/drivers/iommu/mtk_iommu.h
> > +++ b/drivers/iommu/mtk_iommu.h
> > @@ -25,6 +25,7 @@ struct mtk_iommu_suspend_reg {
> >  	u32				int_main_control;
> >  	u32				ivrp_paddr;
> >  	u32				vld_pa_rng;
> > +	u32				wr_len;
> >  };
> >  
> >  enum mtk_iommu_plat {
> > @@ -43,6 +44,7 @@ struct mtk_iommu_plat_data {
> >  	bool		    has_misc_ctrl;
> >  	bool		    has_sub_comm;
> >  	bool                has_vld_pa_rng;
> > +	bool                has_wr_len;
> 
> Given the fact that we are adding more and more plat_data bool values, I think
> it would make sense to use a u32 flags register and add the appropriate macro
> definitions to set and check for a flag present.

Thanks for your advice.
do you mean like this:
struct plat_flag {

        #define  HAS_4GB_MODE   BIT(0)
        #define  HAS_BCLK       BIT(1)
        #define  REST_AXI       BIT(2)
        ... ...

        u32 flag;
};

struct mtk_iommu_plat_data {
        ......
        struct plat_flag flag;
        ......
};


> Regards,
> Matthias
> 
> >  	bool                reset_axi;
> >  	u32                 inv_sel_reg;
> >  	unsigned char       larbid_remap[8][4];
> > 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register
  2020-06-18 11:49     ` chao hao
@ 2020-06-20  2:03       ` Yong Wu
  2020-06-24  6:39         ` chao hao
  0 siblings, 1 reply; 25+ messages in thread
From: Yong Wu @ 2020-06-20  2:03 UTC (permalink / raw)
  To: chao hao
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	Rob Herring, linux-mediatek, Matthias Brugger, linux-arm-kernel


[-- Attachment #1.1: Type: text/plain, Size: 2676 bytes --]

Hi Chao,

On Thu, 2020-06-18 at 19:49 +0800, chao hao wrote:

> On Wed, 2020-06-17 at 11:34 +0200, Matthias Brugger wrote:


[snip]


> > >  
> > >  #define REG_MMU_MISC_CTRL			0x048
> > > +#define F_MMU_IN_ORDER_WR_EN			(BIT(1) | BIT(17))
> > > +#define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> > > +
> > >  #define REG_MMU_DCM_DIS				0x050
> > >  
> > >  #define REG_MMU_CTRL_REG			0x110
> > > @@ -578,6 +581,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> > >  		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
> > >  	}
> > >  
> > > +	if (data->plat_data->has_misc_ctrl) {
> > 
> > That's confusing. We renamed the register to misc_ctrl, but it's present in all
> > SoCs. We should find a better name for this flag to describe what the hardware
> > supports.
> > 
> 
> ok, thanks for you advice, I will rename it in next version.
> ex:has_perf_req(has performance requirement)
> 
> 
> > Regards,
> > Matthias
> > 
> > > +		/* For mm_iommu, it can improve performance by the setting */
> > > +		regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> > > +		regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
> > > +		regval &= ~F_MMU_IN_ORDER_WR_EN;


Note: mt2712 also is MISC_CTRL register, but it don't use this in_order
setting.

As commented in v3. 0x48 is either STANDARD_AXI_MODE or MISC_CTRL
register. No need two flags(reset_axi/has_xx) for it.

something like:

regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
if (reset_axi) {
	regval = 0;
} else {   /* MISC_CTRL */
	if (!apu[1])
		regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
	if (out_order_en)
		regval &= ~F_MMU_IN_ORDER_WR_EN;
}
writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);


[1] Your current patch doesn't support apu-iommu, thus, add it when
necessary.


> > > +		writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
> > > +	}
> > > +
> > >  	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
> > >  			     dev_name(data->dev), (void *)data)) {
> > >  		writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
> > > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > > index 1b6ea839b92c..d711ac630037 100644
> > > --- a/drivers/iommu/mtk_iommu.h
> > > +++ b/drivers/iommu/mtk_iommu.h
> > > @@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
> > >  
> > >  	/* HW will use the EMI clock if there isn't the "bclk". */
> > >  	bool                has_bclk;
> > > +	bool		    has_misc_ctrl;
> > >  	bool                has_vld_pa_rng;
> > >  	bool                reset_axi;
> > >  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
> > > 
> 
> 



[-- Attachment #1.2: Type: text/html, Size: 4649 bytes --]

[-- Attachment #2: Type: text/plain, Size: 156 bytes --]

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779
  2020-06-19 10:56     ` chao hao
@ 2020-06-21 11:01       ` Matthias Brugger
  2020-06-24  6:36         ` chao hao
  0 siblings, 1 reply; 25+ messages in thread
From: Matthias Brugger @ 2020-06-21 11:01 UTC (permalink / raw)
  To: chao hao
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, iommu,
	Rob Herring, linux-mediatek, linux-arm-kernel



On 19/06/2020 12:56, chao hao wrote:
> On Wed, 2020-06-17 at 11:22 +0200, Matthias Brugger wrote:
>>
>> On 17/06/2020 05:00, Chao Hao wrote:
>>> Some platforms(ex: mt6779) have a new register called by REG_MMU_WR_LEN
>>> to improve performance.
>>> This patch add this register definition.
>>
>> Please be more specific what this register is about.
>>
> OK. thanks.
> We can use "has_wr_len" flag to control whether we need to set the
> register. If the register uses default value, iommu will send command to
> EMI without restriction, when the number of commands become more and
> more, it will drop the EMI performance. So when more than
> ten_commands(default value) don't be handled for EMI, IOMMU will stop
> send command to EMI for keeping EMI's performace by enabling write
> throttling mechanism(bit[5][21]=0) in MMU_WR_LEN_CTRL register.
> 
> I will write description above to commit message in next version
> 
>>>
>>> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
>>> ---
>>>  drivers/iommu/mtk_iommu.c | 10 ++++++++++
>>>  drivers/iommu/mtk_iommu.h |  2 ++
>>>  2 files changed, 12 insertions(+)
>>>
>>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
>>> index a687e8db0e51..c706bca6487e 100644
>>> --- a/drivers/iommu/mtk_iommu.c
>>> +++ b/drivers/iommu/mtk_iommu.c
>>> @@ -46,6 +46,8 @@
>>>  #define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
>>>  
>>>  #define REG_MMU_DCM_DIS				0x050
>>> +#define REG_MMU_WR_LEN				0x054
>>> +#define F_MMU_WR_THROT_DIS_BIT			(BIT(5) |  BIT(21))
>>>  
>>>  #define REG_MMU_CTRL_REG			0x110
>>>  #define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
>>> @@ -581,6 +583,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
>>>  		writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG);
>>>  	}
>>>  	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
>>> +	if (data->plat_data->has_wr_len) {
>>> +		/* write command throttling mode */
>>> +		regval = readl_relaxed(data->base + REG_MMU_WR_LEN);
>>> +		regval &= ~F_MMU_WR_THROT_DIS_BIT;
>>> +		writel_relaxed(regval, data->base + REG_MMU_WR_LEN);
>>> +	}
>>>  
>>>  	if (data->plat_data->reset_axi) {
>>>  		/* The register is called STANDARD_AXI_MODE in this case */
>>> @@ -737,6 +745,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
>>>  	struct mtk_iommu_suspend_reg *reg = &data->reg;
>>>  	void __iomem *base = data->base;
>>>  
>>> +	reg->wr_len = readl_relaxed(base + REG_MMU_WR_LEN);
>>
>> Can we read/write the register without any side effect although hardware has not
>> implemented it (!has_wr_len)?
> 
> It doesn't have side effect. Becasue all the MTK platform have the
> register for iommu HW. If we need to have requirement for performance,
> we can set it by has_wr_len.
> But I'm Sorry, the name of flag(has_wr_len) is not exact, I will rename
> it in next version, ex: "wr_throt_en"
> 
>>
>>
>>>  	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
>>>  	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
>>>  	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
>>> @@ -761,6 +770,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
>>>  		dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
>>>  		return ret;
>>>  	}
>>> +	writel_relaxed(reg->wr_len, base + REG_MMU_WR_LEN);
>>>  	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
>>>  	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
>>>  	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
>>> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
>>> index d51ff99c2c71..9971cedd72ea 100644
>>> --- a/drivers/iommu/mtk_iommu.h
>>> +++ b/drivers/iommu/mtk_iommu.h
>>> @@ -25,6 +25,7 @@ struct mtk_iommu_suspend_reg {
>>>  	u32				int_main_control;
>>>  	u32				ivrp_paddr;
>>>  	u32				vld_pa_rng;
>>> +	u32				wr_len;
>>>  };
>>>  
>>>  enum mtk_iommu_plat {
>>> @@ -43,6 +44,7 @@ struct mtk_iommu_plat_data {
>>>  	bool		    has_misc_ctrl;
>>>  	bool		    has_sub_comm;
>>>  	bool                has_vld_pa_rng;
>>> +	bool                has_wr_len;
>>
>> Given the fact that we are adding more and more plat_data bool values, I think
>> it would make sense to use a u32 flags register and add the appropriate macro
>> definitions to set and check for a flag present.
> 
> Thanks for your advice.
> do you mean like this:
> struct plat_flag {
> 
>         #define  HAS_4GB_MODE   BIT(0)
>         #define  HAS_BCLK       BIT(1)
>         #define  REST_AXI       BIT(2)
>         ... ...
> 
>         u32 flag;
> };
> 
> struct mtk_iommu_plat_data {
>         ......
>         struct plat_flag flag;
>         ......
> };
> 

Nearly, I mean something like this:

#define  HAS_4GB_MODE   BIT(0)
#define  HAS_BCLK       BIT(1)
#define  REST_AXI       BIT(2)

#define MTK_IOMMU_HAS_FLAG(pdata, _x)	\
		((((pdata)->flags) & (_x)) == (_x))

struct mtk_iommu_plat_data {
	...
	u32 flags;
	...
}

if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_BCLK)
...

Regards,
Matthias

> 
>> Regards,
>> Matthias
>>
>>>  	bool                reset_axi;
>>>  	u32                 inv_sel_reg;
>>>  	unsigned char       larbid_remap[8][4];
>>>
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779
  2020-06-21 11:01       ` Matthias Brugger
@ 2020-06-24  6:36         ` chao hao
  0 siblings, 0 replies; 25+ messages in thread
From: chao hao @ 2020-06-24  6:36 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	Rob Herring, linux-mediatek, linux-arm-kernel

On Sun, 2020-06-21 at 13:01 +0200, Matthias Brugger wrote:
> 
> On 19/06/2020 12:56, chao hao wrote:
> > On Wed, 2020-06-17 at 11:22 +0200, Matthias Brugger wrote:
> >>
> >> On 17/06/2020 05:00, Chao Hao wrote:
> >>> Some platforms(ex: mt6779) have a new register called by REG_MMU_WR_LEN
> >>> to improve performance.
> >>> This patch add this register definition.
> >>
> >> Please be more specific what this register is about.
> >>
> > OK. thanks.
> > We can use "has_wr_len" flag to control whether we need to set the
> > register. If the register uses default value, iommu will send command to
> > EMI without restriction, when the number of commands become more and
> > more, it will drop the EMI performance. So when more than
> > ten_commands(default value) don't be handled for EMI, IOMMU will stop
> > send command to EMI for keeping EMI's performace by enabling write
> > throttling mechanism(bit[5][21]=0) in MMU_WR_LEN_CTRL register.
> > 
> > I will write description above to commit message in next version
> > 
> >>>
> >>> Signed-off-by: Chao Hao <chao.hao@mediatek.com>
> >>> ---
> >>>  drivers/iommu/mtk_iommu.c | 10 ++++++++++
> >>>  drivers/iommu/mtk_iommu.h |  2 ++
> >>>  2 files changed, 12 insertions(+)
> >>>
> >>> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> >>> index a687e8db0e51..c706bca6487e 100644
> >>> --- a/drivers/iommu/mtk_iommu.c
> >>> +++ b/drivers/iommu/mtk_iommu.c
> >>> @@ -46,6 +46,8 @@
> >>>  #define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> >>>  
> >>>  #define REG_MMU_DCM_DIS				0x050
> >>> +#define REG_MMU_WR_LEN				0x054
> >>> +#define F_MMU_WR_THROT_DIS_BIT			(BIT(5) |  BIT(21))
> >>>  
> >>>  #define REG_MMU_CTRL_REG			0x110
> >>>  #define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
> >>> @@ -581,6 +583,12 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> >>>  		writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG);
> >>>  	}
> >>>  	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
> >>> +	if (data->plat_data->has_wr_len) {
> >>> +		/* write command throttling mode */
> >>> +		regval = readl_relaxed(data->base + REG_MMU_WR_LEN);
> >>> +		regval &= ~F_MMU_WR_THROT_DIS_BIT;
> >>> +		writel_relaxed(regval, data->base + REG_MMU_WR_LEN);
> >>> +	}
> >>>  
> >>>  	if (data->plat_data->reset_axi) {
> >>>  		/* The register is called STANDARD_AXI_MODE in this case */
> >>> @@ -737,6 +745,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
> >>>  	struct mtk_iommu_suspend_reg *reg = &data->reg;
> >>>  	void __iomem *base = data->base;
> >>>  
> >>> +	reg->wr_len = readl_relaxed(base + REG_MMU_WR_LEN);
> >>
> >> Can we read/write the register without any side effect although hardware has not
> >> implemented it (!has_wr_len)?
> > 
> > It doesn't have side effect. Becasue all the MTK platform have the
> > register for iommu HW. If we need to have requirement for performance,
> > we can set it by has_wr_len.
> > But I'm Sorry, the name of flag(has_wr_len) is not exact, I will rename
> > it in next version, ex: "wr_throt_en"
> > 
> >>
> >>
> >>>  	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
> >>>  	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
> >>>  	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
> >>> @@ -761,6 +770,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> >>>  		dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
> >>>  		return ret;
> >>>  	}
> >>> +	writel_relaxed(reg->wr_len, base + REG_MMU_WR_LEN);
> >>>  	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
> >>>  	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
> >>>  	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
> >>> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> >>> index d51ff99c2c71..9971cedd72ea 100644
> >>> --- a/drivers/iommu/mtk_iommu.h
> >>> +++ b/drivers/iommu/mtk_iommu.h
> >>> @@ -25,6 +25,7 @@ struct mtk_iommu_suspend_reg {
> >>>  	u32				int_main_control;
> >>>  	u32				ivrp_paddr;
> >>>  	u32				vld_pa_rng;
> >>> +	u32				wr_len;
> >>>  };
> >>>  
> >>>  enum mtk_iommu_plat {
> >>> @@ -43,6 +44,7 @@ struct mtk_iommu_plat_data {
> >>>  	bool		    has_misc_ctrl;
> >>>  	bool		    has_sub_comm;
> >>>  	bool                has_vld_pa_rng;
> >>> +	bool                has_wr_len;
> >>
> >> Given the fact that we are adding more and more plat_data bool values, I think
> >> it would make sense to use a u32 flags register and add the appropriate macro
> >> definitions to set and check for a flag present.
> > 
> > Thanks for your advice.
> > do you mean like this:
> > struct plat_flag {
> > 
> >         #define  HAS_4GB_MODE   BIT(0)
> >         #define  HAS_BCLK       BIT(1)
> >         #define  REST_AXI       BIT(2)
> >         ... ...
> > 
> >         u32 flag;
> > };
> > 
> > struct mtk_iommu_plat_data {
> >         ......
> >         struct plat_flag flag;
> >         ......
> > };
> > 
> 
> Nearly, I mean something like this:
> 
> #define  HAS_4GB_MODE   BIT(0)
> #define  HAS_BCLK       BIT(1)
> #define  REST_AXI       BIT(2)
> 
> #define MTK_IOMMU_HAS_FLAG(pdata, _x)	\
> 		((((pdata)->flags) & (_x)) == (_x))
> 
> struct mtk_iommu_plat_data {
> 	...
> 	u32 flags;
> 	...
> }
> 
> if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_BCLK)
> ...
> 

Ok, got it, thanks


> Regards,
> Matthias
> 
> > 
> >> Regards,
> >> Matthias
> >>
> >>>  	bool                reset_axi;
> >>>  	u32                 inv_sel_reg;
> >>>  	unsigned char       larbid_remap[8][4];
> >>>
> > 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register
  2020-06-20  2:03       ` Yong Wu
@ 2020-06-24  6:39         ` chao hao
  0 siblings, 0 replies; 25+ messages in thread
From: chao hao @ 2020-06-24  6:39 UTC (permalink / raw)
  To: Yong Wu
  Cc: devicetree, FY Yang, wsd_upstream, linux-kernel, Chao Hao, iommu,
	Rob Herring, linux-mediatek, Matthias Brugger, linux-arm-kernel

On Sat, 2020-06-20 at 10:03 +0800, Yong Wu wrote:
> Hi Chao,
> 
> On Thu, 2020-06-18 at 19:49 +0800, chao hao wrote: 
> > On Wed, 2020-06-17 at 11:34 +0200, Matthias Brugger wrote:
> 
> [snip]
> 
> > > >  
> > > >  #define REG_MMU_MISC_CTRL			0x048
> > > > +#define F_MMU_IN_ORDER_WR_EN			(BIT(1) | BIT(17))
> > > > +#define F_MMU_STANDARD_AXI_MODE_BIT		(BIT(3) | BIT(19))
> > > > +
> > > >  #define REG_MMU_DCM_DIS				0x050
> > > >  
> > > >  #define REG_MMU_CTRL_REG			0x110
> > > > @@ -578,6 +581,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> > > >  		writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
> > > >  	}
> > > >  
> > > > +	if (data->plat_data->has_misc_ctrl) {
> > > 
> > > That's confusing. We renamed the register to misc_ctrl, but it's present in all
> > > SoCs. We should find a better name for this flag to describe what the hardware
> > > supports.
> > > 
> > 
> > ok, thanks for you advice, I will rename it in next version.
> > ex:has_perf_req(has performance requirement)
> > 
> > 
> > > Regards,
> > > Matthias
> > > 
> > > > +		/* For mm_iommu, it can improve performance by the setting */
> > > > +		regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> > > > +		regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
> > > > +		regval &= ~F_MMU_IN_ORDER_WR_EN;
> 
> Note: mt2712 also is MISC_CTRL register, but it don't use this
> in_order setting.
> 
> As commented in v3. 0x48 is either STANDARD_AXI_MODE or MISC_CTRL
> register. No need two flags(reset_axi/has_xx) for it.
> 
> something like:
> 
> regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
> if (reset_axi) {
> regval = 0;
> } else {   /* MISC_CTRL */
> if (!apu[1])
> regval &= ~F_MMU_STANDARD_AXI_MODE_BIT;
> if (out_order_en)
> regval &= ~F_MMU_IN_ORDER_WR_EN;
> }
> writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
> 
> 
> [1] Your current patch doesn't support apu-iommu, thus, add it when
> necessary.

ok, the patchset don't need to "if (!apu[1])", I will fix it in next
version. thanks


> > > > +		writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
> > > > +	}
> > > > +
> > > >  	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
> > > >  			     dev_name(data->dev), (void *)data)) {
> > > >  		writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
> > > > diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> > > > index 1b6ea839b92c..d711ac630037 100644
> > > > --- a/drivers/iommu/mtk_iommu.h
> > > > +++ b/drivers/iommu/mtk_iommu.h
> > > > @@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
> > > >  
> > > >  	/* HW will use the EMI clock if there isn't the "bclk". */
> > > >  	bool                has_bclk;
> > > > +	bool		    has_misc_ctrl;
> > > >  	bool                has_vld_pa_rng;
> > > >  	bool                reset_axi;
> > > >  	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
> > > > 
> > 
> > 
> 

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 25+ messages in thread

end of thread, other threads:[~2020-06-24  6:40 UTC | newest]

Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-17  3:00 [PATCH v4 00/07] MT6779 IOMMU SUPPORT Chao Hao
2020-06-17  3:00 ` [PATCH v4 1/7] dt-bindings: mediatek: Add bindings for MT6779 Chao Hao
2020-06-17  3:00 ` [PATCH v4 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL Chao Hao
2020-06-17  9:04   ` Matthias Brugger
2020-06-17  3:00 ` [PATCH v4 3/7] iommu/mediatek: Set MISC_CTRL register Chao Hao
2020-06-17  9:34   ` Matthias Brugger
2020-06-18 11:49     ` chao hao
2020-06-20  2:03       ` Yong Wu
2020-06-24  6:39         ` chao hao
2020-06-17  3:00 ` [PATCH v4 4/7] iommu/mediatek: Move inv_sel_reg into the plat_data Chao Hao
2020-06-17  9:09   ` Matthias Brugger
2020-06-17  3:00 ` [PATCH v4 5/7] iommu/mediatek: Add sub_comm id in translation fault Chao Hao
2020-06-17  9:17   ` Matthias Brugger
2020-06-17 11:11     ` Yong Wu
2020-06-18 11:44       ` chao hao
2020-06-17  3:00 ` [PATCH v4 6/7] iommu/mediatek: Add REG_MMU_WR_LEN definition preparing for mt6779 Chao Hao
2020-06-17  9:22   ` Matthias Brugger
2020-06-19 10:56     ` chao hao
2020-06-21 11:01       ` Matthias Brugger
2020-06-24  6:36         ` chao hao
2020-06-17  3:00 ` [PATCH v4 7/7] iommu/mediatek: Add mt6779 basic support Chao Hao
2020-06-17  9:33   ` Matthias Brugger
2020-06-18 11:54     ` chao hao
2020-06-18 16:00       ` Matthias Brugger
2020-06-19 10:50         ` chao hao

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).