iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Will Deacon <will@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Joerg Roedel <joro@8bytes.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: linux-arm-msm@vger.kernel.org, iommu@lists.linux-foundation.org,
	Jonathan Marek <jonathan@marek.ca>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/5] iommu/arm-smmu: Emulate bypass by using context banks
Date: Wed,  8 Jul 2020 22:01:42 -0700	[thread overview]
Message-ID: <20200709050145.3520931-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20200709050145.3520931-1-bjorn.andersson@linaro.org>

Some firmware found on various Qualcomm platforms traps writes to S2CR
of type BYPASS and writes FAULT into the register. This prevents us from
marking the streams for the display controller as BYPASS to allow
continued scanout of the screen through the initialization of the ARM
SMMU.

This adds a Qualcomm specific cfg_probe function, which probes the
behavior of the S2CR registers and if found faulty enables the related
quirk. Based on this quirk context banks are allocated for IDENTITY
domains as well, but with ARM_SMMU_SCTLR_M omitted.

The result is valid stream mappings, without translation.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/iommu/arm-smmu-qcom.c | 21 +++++++++++++++++++++
 drivers/iommu/arm-smmu.c      | 14 ++++++++++++--
 drivers/iommu/arm-smmu.h      |  3 +++
 3 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/arm-smmu-qcom.c b/drivers/iommu/arm-smmu-qcom.c
index cf01d0215a39..e8a36054e912 100644
--- a/drivers/iommu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm-smmu-qcom.c
@@ -23,6 +23,26 @@ static const struct of_device_id qcom_smmu_client_of_match[] = {
 	{ }
 };
 
+static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu)
+{
+	unsigned int last_s2cr = ARM_SMMU_GR0_S2CR(smmu->num_mapping_groups - 1);
+	u32 reg;
+
+	/*
+	 * With some firmware writes to S2CR of type FAULT are ignored, and
+	 * writing BYPASS will end up as FAULT in the register. Perform a write
+	 * to S2CR to detect if this is the case with the current firmware.
+	 */
+	arm_smmu_gr0_write(smmu, last_s2cr, FIELD_PREP(ARM_SMMU_S2CR_TYPE, S2CR_TYPE_BYPASS) |
+					    FIELD_PREP(ARM_SMMU_S2CR_CBNDX, 0xff) |
+					    FIELD_PREP(ARM_SMMU_S2CR_PRIVCFG, S2CR_PRIVCFG_DEFAULT));
+	reg = arm_smmu_gr0_read(smmu, last_s2cr);
+	if (FIELD_GET(ARM_SMMU_S2CR_TYPE, reg) != S2CR_TYPE_BYPASS)
+		smmu->qcom_bypass_quirk = true;
+
+	return 0;
+}
+
 static int qcom_smmu_def_domain_type(struct device *dev)
 {
 	const struct of_device_id *match =
@@ -61,6 +81,7 @@ static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
 }
 
 static const struct arm_smmu_impl qcom_smmu_impl = {
+	.cfg_probe = qcom_smmu_cfg_probe,
 	.def_domain_type = qcom_smmu_def_domain_type,
 	.reset = qcom_smmu500_reset,
 };
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 2e27cf9815ab..f33eda3117fa 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -654,7 +654,9 @@ static void arm_smmu_write_context_bank(struct arm_smmu_device *smmu, int idx)
 
 	/* SCTLR */
 	reg = ARM_SMMU_SCTLR_CFIE | ARM_SMMU_SCTLR_CFRE | ARM_SMMU_SCTLR_AFE |
-	      ARM_SMMU_SCTLR_TRE | ARM_SMMU_SCTLR_M;
+	      ARM_SMMU_SCTLR_TRE;
+	if (cfg->m)
+		reg |= ARM_SMMU_SCTLR_M;
 	if (stage1)
 		reg |= ARM_SMMU_SCTLR_S1_ASIDPNE;
 	if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
@@ -678,7 +680,11 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
 	if (smmu_domain->smmu)
 		goto out_unlock;
 
-	if (domain->type == IOMMU_DOMAIN_IDENTITY) {
+	/*
+	 * Nothing to do for IDENTITY domains,unless disabled context banks are
+	 * used to emulate bypass mappings on Qualcomm platforms.
+	 */
+	if (domain->type == IOMMU_DOMAIN_IDENTITY && !smmu->qcom_bypass_quirk) {
 		smmu_domain->stage = ARM_SMMU_DOMAIN_BYPASS;
 		smmu_domain->smmu = smmu;
 		goto out_unlock;
@@ -826,6 +832,10 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
 	domain->geometry.aperture_end = (1UL << ias) - 1;
 	domain->geometry.force_aperture = true;
 
+	/* Enable translation for non-identity context banks */
+	if (domain->type != IOMMU_DOMAIN_IDENTITY)
+		cfg->m = true;
+
 	/* Initialise the context bank with our page table cfg */
 	arm_smmu_init_context_bank(smmu_domain, &pgtbl_cfg);
 	arm_smmu_write_context_bank(smmu, cfg->cbndx);
diff --git a/drivers/iommu/arm-smmu.h b/drivers/iommu/arm-smmu.h
index d172c024be61..a71d193073e4 100644
--- a/drivers/iommu/arm-smmu.h
+++ b/drivers/iommu/arm-smmu.h
@@ -305,6 +305,8 @@ struct arm_smmu_device {
 
 	/* IOMMU core code handle */
 	struct iommu_device		iommu;
+
+	bool				qcom_bypass_quirk;
 };
 
 enum arm_smmu_context_fmt {
@@ -323,6 +325,7 @@ struct arm_smmu_cfg {
 	};
 	enum arm_smmu_cbar_type		cbar;
 	enum arm_smmu_context_fmt	fmt;
+	bool				m;
 };
 #define ARM_SMMU_INVALID_IRPTNDX	0xff
 
-- 
2.26.2

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2020-07-09  5:01 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09  5:01 [PATCH 0/5] iommu/arm-smmu: Support maintaining bootloader mappings Bjorn Andersson
2020-07-09  5:01 ` [PATCH 1/5] iommu/arm-smmu: Make all valid stream mappings BYPASS Bjorn Andersson
2020-07-13 21:25   ` kernel test robot
2020-07-13 21:25   ` [RFC PATCH] iommu/arm-smmu: arm_smmu_setup_identity() can be static kernel test robot
2020-07-15 23:20   ` [PATCH 1/5] iommu/arm-smmu: Make all valid stream mappings BYPASS kernel test robot
2020-07-09  5:01 ` Bjorn Andersson [this message]
2020-07-09 16:17   ` [PATCH 2/5] iommu/arm-smmu: Emulate bypass by using context banks Rob Clark
2020-07-09 16:48     ` Bjorn Andersson
2020-07-09 16:56       ` Rob Clark
2020-07-09 18:55         ` Rob Clark
2020-07-09 19:40           ` Bjorn Andersson
2020-07-09  5:01 ` [PATCH 3/5] iommu/arm-smmu: Move SMR and S2CR definitions to header file Bjorn Andersson
2020-07-09  5:01 ` [PATCH 4/5] iommu/arm-smmu-qcom: Consstently initialize stream mappings Bjorn Andersson
2020-07-09  7:32   ` Vinod Koul
2020-07-09  5:01 ` [PATCH 5/5] iommu/arm-smmu: Setup identity domain for boot mappings Bjorn Andersson
2020-07-09 15:50   ` Laurentiu Tudor
2020-07-09 19:57     ` Bjorn Andersson
2020-07-28 15:27       ` Laurentiu Tudor
2020-07-09  7:33 ` [PATCH 0/5] iommu/arm-smmu: Support maintaining bootloader mappings Vinod Koul
2020-07-10  5:25 ` John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200709050145.3520931-3-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jonathan@marek.ca \
    --cc=joro@8bytes.org \
    --cc=laurentiu.tudor@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=thierry.reding@gmail.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).