iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Jean-Philippe Brucker <jean-philippe@linaro.org>
To: Jacob Pan <jacob.pan.linux@gmail.com>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	LKML <linux-kernel@vger.kernel.org>,
	iommu@lists.linux-foundation.org, Wu Hao <hao.wu@intel.com>,
	David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH v2 6/9] iommu/ioasid: Introduce notification APIs
Date: Tue, 25 Aug 2020 12:26:17 +0200	[thread overview]
Message-ID: <20200825102617.GD3252704@myrica> (raw)
In-Reply-To: <1598070918-21321-7-git-send-email-jacob.jun.pan@linux.intel.com>

On Fri, Aug 21, 2020 at 09:35:15PM -0700, Jacob Pan wrote:
> Relations among IOASID users largely follow a publisher-subscriber
> pattern. E.g. to support guest SVA on Intel Scalable I/O Virtualization
> (SIOV) enabled platforms, VFIO, IOMMU, device drivers, KVM are all users
> of IOASIDs. When a state change occurs, VFIO publishes the change event
> that needs to be processed by other users/subscribers.
> 
> This patch introduced two types of notifications: global and per
> ioasid_set. The latter is intended for users who only needs to handle
> events related to the IOASID of a given set.
> For more information, refer to the kernel documentation at
> Documentation/ioasid.rst.
> 
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> Signed-off-by: Wu Hao <hao.wu@intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> ---
>  drivers/iommu/ioasid.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++++-
>  include/linux/ioasid.h |  70 +++++++++++++
>  2 files changed, 348 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iommu/ioasid.c b/drivers/iommu/ioasid.c
> index c0aef38a4fde..6ddc09a7fe74 100644
> --- a/drivers/iommu/ioasid.c
> +++ b/drivers/iommu/ioasid.c
> @@ -9,8 +9,35 @@
>  #include <linux/spinlock.h>
>  #include <linux/xarray.h>
>  #include <linux/ioasid.h>
> +#include <linux/sched/mm.h>
>  
>  static DEFINE_XARRAY_ALLOC(ioasid_sets);
> +/*
> + * An IOASID could have multiple consumers where each consumeer may have

consumer

> + * hardware contexts associated with IOASIDs.
> + * When a status change occurs, such as IOASID is being freed, notifier chains
> + * are used to keep the consumers in sync.
> + * This is a publisher-subscriber pattern where publisher can change the
> + * state of each IOASID, e.g. alloc/free, bind IOASID to a device and mm.
> + * On the other hand, subscribers gets notified for the state change and
> + * keep local states in sync.
> + *
> + * Currently, the notifier is global. A further optimization could be per
> + * IOASID set notifier chain.

The patch adds both

> + */
> +static ATOMIC_NOTIFIER_HEAD(ioasid_chain);

"ioasid_notifier" may be clearer

> +
> +/* List to hold pending notification block registrations */
> +static LIST_HEAD(ioasid_nb_pending_list);
> +static DEFINE_SPINLOCK(ioasid_nb_lock);
> +struct ioasid_set_nb {
> +	struct list_head	list;
> +	struct notifier_block	*nb;
> +	void			*token;
> +	struct ioasid_set	*set;
> +	bool			active;
> +};
> +
>  enum ioasid_state {
>  	IOASID_STATE_INACTIVE,
>  	IOASID_STATE_ACTIVE,
> @@ -394,6 +421,7 @@ EXPORT_SYMBOL_GPL(ioasid_find_by_spid);
>  ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min, ioasid_t max,
>  		      void *private)
>  {
> +	struct ioasid_nb_args args;
>  	struct ioasid_data *data;
>  	void *adata;
>  	ioasid_t id = INVALID_IOASID;
> @@ -445,8 +473,14 @@ ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min, ioasid_t max,
>  		goto exit_free;
>  	}
>  	set->nr_ioasids++;
> -	goto done_unlock;
> +	args.id = id;
> +	/* Set private ID is not attached during allocation */
> +	args.spid = INVALID_IOASID;
> +	args.set = set;

args.pdata is uninitialized

> +	atomic_notifier_call_chain(&set->nh, IOASID_ALLOC, &args);

No global notification?

>  
> +	spin_unlock(&ioasid_allocator_lock);
> +	return id;
>  exit_free:
>  	kfree(data);
>  done_unlock:
> @@ -479,6 +513,7 @@ static void ioasid_do_free(struct ioasid_data *data)
>  
>  static void ioasid_free_locked(struct ioasid_set *set, ioasid_t ioasid)
>  {
> +	struct ioasid_nb_args args;
>  	struct ioasid_data *data;
>  
>  	data = xa_load(&active_allocator->xa, ioasid);
> @@ -491,7 +526,16 @@ static void ioasid_free_locked(struct ioasid_set *set, ioasid_t ioasid)
>  		pr_warn("Cannot free IOASID %u due to set ownership\n", ioasid);
>  		return;
>  	}
> +
>  	data->state = IOASID_STATE_FREE_PENDING;
> +	/* Notify all users that this IOASID is being freed */
> +	args.id = ioasid;
> +	args.spid = data->spid;
> +	args.pdata = data->private;
> +	args.set = data->set;
> +	atomic_notifier_call_chain(&ioasid_chain, IOASID_FREE, &args);
> +	/* Notify the ioasid_set for per set users */
> +	atomic_notifier_call_chain(&set->nh, IOASID_FREE, &args);
>  
>  	if (!refcount_dec_and_test(&data->users))
>  		return;
> @@ -514,6 +558,28 @@ void ioasid_free(struct ioasid_set *set, ioasid_t ioasid)
>  }
>  EXPORT_SYMBOL_GPL(ioasid_free);
>  
> +static void ioasid_add_pending_nb(struct ioasid_set *set)
> +{
> +	struct ioasid_set_nb *curr;
> +
> +	if (set->type != IOASID_SET_TYPE_MM)
> +		return;
> +
> +	/*
> +	 * Check if there are any pending nb requests for the given token, if so
> +	 * add them to the notifier chain.
> +	 */
> +	spin_lock(&ioasid_nb_lock);
> +	list_for_each_entry(curr, &ioasid_nb_pending_list, list) {
> +		if (curr->token == set->token && !curr->active) {
> +			atomic_notifier_chain_register(&set->nh, curr->nb);
> +			curr->set = set;
> +			curr->active = true;
> +		}
> +	}
> +	spin_unlock(&ioasid_nb_lock);
> +}
> +
>  /**
>   * ioasid_alloc_set - Allocate a new IOASID set for a given token
>   *
> @@ -601,6 +667,13 @@ struct ioasid_set *ioasid_alloc_set(void *token, ioasid_t quota, int type)
>  	sdata->quota = quota;
>  	sdata->sid = id;
>  	refcount_set(&sdata->ref, 1);
> +	ATOMIC_INIT_NOTIFIER_HEAD(&sdata->nh);
> +
> +	/*
> +	 * Check if there are any pending nb requests for the given token, if so
> +	 * add them to the notifier chain.
> +	 */
> +	ioasid_add_pending_nb(sdata);
>  
>  	/*
>  	 * Per set XA is used to store private IDs within the set, get ready
> @@ -617,6 +690,30 @@ struct ioasid_set *ioasid_alloc_set(void *token, ioasid_t quota, int type)
>  }
>  EXPORT_SYMBOL_GPL(ioasid_alloc_set);
>  
> +
> +/*
> + * ioasid_find_mm_set - Retrieve IOASID set with mm token
> + * Take a reference of the set if found.
> + */
> +static struct ioasid_set *ioasid_find_mm_set(struct mm_struct *token)
> +{
> +	struct ioasid_set *sdata, *set = NULL;
> +	unsigned long index;
> +
> +	spin_lock(&ioasid_allocator_lock);
> +
> +	xa_for_each(&ioasid_sets, index, sdata) {
> +		if (sdata->type == IOASID_SET_TYPE_MM && sdata->token == token) {
> +			refcount_inc(&sdata->ref);
> +			set = sdata;
> +			goto exit_unlock;

Or just break

> +		}
> +	}
> +exit_unlock:
> +	spin_unlock(&ioasid_allocator_lock);
> +	return set;
> +}
> +
>  void ioasid_set_get_locked(struct ioasid_set *set)
>  {
>  	if (WARN_ON(xa_load(&ioasid_sets, set->sid) != set)) {
> @@ -638,6 +735,8 @@ EXPORT_SYMBOL_GPL(ioasid_set_get);
>  
>  void ioasid_set_put_locked(struct ioasid_set *set)
>  {
> +	struct ioasid_nb_args args = { 0 };
> +	struct ioasid_set_nb *curr;
>  	struct ioasid_data *entry;
>  	unsigned long index;
>  
> @@ -673,8 +772,24 @@ void ioasid_set_put_locked(struct ioasid_set *set)
>  done_destroy:
>  	/* Return the quota back to system pool */
>  	ioasid_capacity_avail += set->quota;
> -	kfree_rcu(set, rcu);
>  
> +	/* Restore pending status of the set NBs */
> +	spin_lock(&ioasid_nb_lock);
> +	list_for_each_entry(curr, &ioasid_nb_pending_list, list) {
> +		if (curr->token == set->token) {
> +			if (curr->active)
> +				curr->active = false;
> +			else
> +				pr_warn("Set token exists but not active!\n");
> +		}
> +	}
> +	spin_unlock(&ioasid_nb_lock);
> +
> +	args.set = set;
> +	atomic_notifier_call_chain(&ioasid_chain, IOASID_SET_FREE, &args);
> +
> +	kfree_rcu(set, rcu);
> +	pr_debug("Set freed %d\n", set->sid);

set might have been freed

>  	/*
>  	 * Token got released right away after the ioasid_set is freed.
>  	 * If a new set is created immediately with the newly released token,
> @@ -927,6 +1042,167 @@ void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid,
>  }
>  EXPORT_SYMBOL_GPL(ioasid_find);
>  
> +int ioasid_register_notifier(struct ioasid_set *set, struct notifier_block *nb)

Maybe add a bit of documentation on the difference with the _mm variant,
as well as the @set parameter.

Will this be used by anyone at first?  We could introduce only the _mm
functions for now.

> +{
> +	if (set)
> +		return atomic_notifier_chain_register(&set->nh, nb);
> +	else
> +		return atomic_notifier_chain_register(&ioasid_chain, nb);
> +}
> +EXPORT_SYMBOL_GPL(ioasid_register_notifier);
> +
> +void ioasid_unregister_notifier(struct ioasid_set *set,
> +				struct notifier_block *nb)
> +{
> +	struct ioasid_set_nb *curr;
> +
> +	spin_lock(&ioasid_nb_lock);
> +	/*
> +	 * Pending list is registered with a token without an ioasid_set,
> +	 * therefore should not be unregistered directly.
> +	 */
> +	list_for_each_entry(curr, &ioasid_nb_pending_list, list) {
> +		if (curr->nb == nb) {
> +			pr_warn("Cannot unregister NB from pending list\n");
> +			spin_unlock(&ioasid_nb_lock);
> +			return;
> +		}
> +	}
> +	spin_unlock(&ioasid_nb_lock);
> +
> +	if (set)
> +		atomic_notifier_chain_unregister(&set->nh, nb);
> +	else
> +		atomic_notifier_chain_unregister(&ioasid_chain, nb);
> +}
> +EXPORT_SYMBOL_GPL(ioasid_unregister_notifier);
> +
> +int ioasid_register_notifier_mm(struct mm_struct *mm, struct notifier_block *nb)
> +{
> +	struct ioasid_set_nb *curr;
> +	struct ioasid_set *set;
> +	int ret = 0;
> +
> +	if (!mm)
> +		return -EINVAL;
> +
> +	spin_lock(&ioasid_nb_lock);
> +
> +	/* Check for duplicates, nb is unique per set */
> +	list_for_each_entry(curr, &ioasid_nb_pending_list, list) {
> +		if (curr->token == mm && curr->nb == nb) {
> +			ret = -EBUSY;
> +			goto exit_unlock;
> +		}
> +	}
> +
> +	/* Check if the token has an existing set */
> +	set = ioasid_find_mm_set(mm);

Seems to be a deadlock here, as ioasid_find_mm_set() grabs
ioasid_allocator_lock while holding ioasid_nb_lock, and
ioasid_set_put/get_locked() grabs ioasid_nb_lock while holding
ioasid_allocator_lock.

> +	if (IS_ERR_OR_NULL(set)) {

Looks a bit off, maybe we can check !set since ioasid_find_mm_set()
doesn't return errors.

> +		/* Add to the rsvd list as inactive */
> +		curr->active = false;

curr isn't valid here

> +	} else {
> +		/* REVISIT: Only register empty set for now. Can add an option
> +		 * in the future to playback existing PASIDs.
> +		 */
> +		if (set->nr_ioasids) {
> +			pr_warn("IOASID set %d not empty\n", set->sid);
> +			ret = -EBUSY;
> +			goto exit_unlock;
> +		}
> +		curr = kzalloc(sizeof(*curr), GFP_ATOMIC);

As a side-note, I think there's too much atomic allocation in this file,
I'd like to try and rework the locking once it stabilizes and I find some
time. Do you remember why ioasid_allocator_lock needed to be a spinlock?

> +		if (!curr) {
> +			ret = -ENOMEM;
> +			goto exit_unlock;
> +		}
> +		curr->token = mm;
> +		curr->nb = nb;
> +		curr->active = true;
> +		curr->set = set;
> +
> +		/* Set already created, add to the notifier chain */
> +		atomic_notifier_chain_register(&set->nh, nb);
> +		/*
> +		 * Do not hold a reference, if the set gets destroyed, the nb
> +		 * entry will be marked inactive.
> +		 */
> +		ioasid_set_put(set);
> +	}
> +
> +	list_add(&curr->list, &ioasid_nb_pending_list);
> +
> +exit_unlock:
> +	spin_unlock(&ioasid_nb_lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(ioasid_register_notifier_mm);
> +
> +void ioasid_unregister_notifier_mm(struct mm_struct *mm, struct notifier_block *nb)
> +{
> +	struct ioasid_set_nb *curr;
> +
> +	spin_lock(&ioasid_nb_lock);
> +	list_for_each_entry(curr, &ioasid_nb_pending_list, list) {
> +		if (curr->token == mm && curr->nb == nb) {
> +			list_del(&curr->list);
> +			goto exit_free;
> +		}
> +	}
> +	pr_warn("No ioasid set found for mm token %llx\n",  (u64)mm);
> +	goto done_unlock;
> +
> +exit_free:
> +	if (curr->active) {
> +		pr_debug("mm set active, unregister %llx\n",
> +			(u64)mm);

%px shows raw pointers, but I would drop this altogether or use %p.

> +		atomic_notifier_chain_unregister(&curr->set->nh, nb);
> +	}
> +	kfree(curr);
> +done_unlock:
> +	spin_unlock(&ioasid_nb_lock);
> +	return;
> +}
> +EXPORT_SYMBOL_GPL(ioasid_unregister_notifier_mm);
> +
> +/**
> + * ioasid_notify - Send notification on a given IOASID for status change.
> + *                 Used by publishers when the status change may affect
> + *                 subscriber's internal state.
> + *
> + * @ioasid:	The IOASID to which the notification will send
> + * @cmd:	The notification event
> + * @flags:	Special instructions, e.g. notify with a set or global

Describe valid values for @cmd and @flags?  I guess this function
shouldn't accept IOASID_ALLOC, IOASID_FREE etc

> + */
> +int ioasid_notify(ioasid_t ioasid, enum ioasid_notify_val cmd, unsigned int flags)
> +{
> +	struct ioasid_data *ioasid_data;
> +	struct ioasid_nb_args args = { 0 };
> +	int ret = 0;
> +
> +	spin_lock(&ioasid_allocator_lock);
> +	ioasid_data = xa_load(&active_allocator->xa, ioasid);
> +	if (!ioasid_data) {
> +		pr_err("Trying to notify unknown IOASID %u\n", ioasid);
> +		spin_unlock(&ioasid_allocator_lock);
> +		return -EINVAL;
> +	}
> +
> +	args.id = ioasid;
> +	args.set = ioasid_data->set;
> +	args.pdata = ioasid_data->private;
> +	args.spid = ioasid_data->spid;
> +	if (flags & IOASID_NOTIFY_ALL) {
> +		ret = atomic_notifier_call_chain(&ioasid_chain, cmd, &args);
> +	} else if (flags & IOASID_NOTIFY_SET) {
> +		ret = atomic_notifier_call_chain(&ioasid_data->set->nh,
> +						 cmd, &args);
> +	}

else ret = -EINVAL?
What about allowing both flags?

> +	spin_unlock(&ioasid_allocator_lock);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(ioasid_notify);
> +
>  MODULE_AUTHOR("Jean-Philippe Brucker <jean-philippe.brucker@arm.com>");
>  MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
>  MODULE_DESCRIPTION("IO Address Space ID (IOASID) allocator");
> diff --git a/include/linux/ioasid.h b/include/linux/ioasid.h
> index d4b3e83672f6..572111cd3b4b 100644
> --- a/include/linux/ioasid.h
> +++ b/include/linux/ioasid.h
> @@ -23,6 +23,7 @@ enum ioasid_set_type {
>   * struct ioasid_set - Meta data about ioasid_set
>   * @type:	Token types and other features
>   * @token:	Unique to identify an IOASID set
> + * @nh:		Notifier for IOASID events within the set
>   * @xa:		XArray to store ioasid_set private IDs, can be used for
>   *		guest-host IOASID mapping, or just a private IOASID namespace.
>   * @quota:	Max number of IOASIDs can be allocated within the set
> @@ -32,6 +33,7 @@ enum ioasid_set_type {
>   */
>  struct ioasid_set {
>  	void *token;
> +	struct atomic_notifier_head nh;
>  	struct xarray xa;
>  	int type;
>  	int quota;
> @@ -56,6 +58,49 @@ struct ioasid_allocator_ops {
>  	void *pdata;
>  };
>  
> +/* Notification data when IOASID status changed */
> +enum ioasid_notify_val {
> +	IOASID_ALLOC = 1,
> +	IOASID_FREE,
> +	IOASID_BIND,
> +	IOASID_UNBIND,
> +	IOASID_SET_ALLOC,
> +	IOASID_SET_FREE,
> +};

May be nicer to prefix these with IOASID_NOTIFY_

> +
> +#define IOASID_NOTIFY_ALL BIT(0)
> +#define IOASID_NOTIFY_SET BIT(1)
> +/**
> + * enum ioasid_notifier_prios - IOASID event notification order
> + *
> + * When status of an IOASID changes, users might need to take actions to
> + * reflect the new state. For example, when an IOASID is freed due to
> + * exception, the hardware context in virtual CPU, DMA device, and IOMMU
> + * shall be cleared and drained. Order is required to prevent life cycle
> + * problems.
> + */
> +enum ioasid_notifier_prios {
> +	IOASID_PRIO_LAST,
> +	IOASID_PRIO_DEVICE,
> +	IOASID_PRIO_IOMMU,
> +	IOASID_PRIO_CPU,
> +};

Not used by this patch, can be added later

> +
> +/**
> + * struct ioasid_nb_args - Argument provided by IOASID core when notifier
> + * is called.
> + * @id:		The IOASID being notified
> + * @spid:	The set private ID associated with the IOASID
> + * @set:	The IOASID set of @id
> + * @pdata:	The private data attached to the IOASID
> + */
> +struct ioasid_nb_args {
> +	ioasid_t id;
> +	ioasid_t spid;
> +	struct ioasid_set *set;
> +	void *pdata;
> +};
> +
>  #if IS_ENABLED(CONFIG_IOASID)
>  void ioasid_install_capacity(ioasid_t total);
>  ioasid_t ioasid_get_capacity(void);
> @@ -75,8 +120,16 @@ void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid, bool (*getter)(void *
>  int ioasid_attach_data(ioasid_t ioasid, void *data);
>  int ioasid_attach_spid(ioasid_t ioasid, ioasid_t spid);
>  ioasid_t ioasid_find_by_spid(struct ioasid_set *set, ioasid_t spid);
> +
> +int ioasid_register_notifier(struct ioasid_set *set,
> +			struct notifier_block *nb);
> +void ioasid_unregister_notifier(struct ioasid_set *set,
> +				struct notifier_block *nb);
> +
>  int ioasid_register_allocator(struct ioasid_allocator_ops *allocator);
>  void ioasid_unregister_allocator(struct ioasid_allocator_ops *allocator);
> +
> +int ioasid_notify(ioasid_t ioasid, enum ioasid_notify_val cmd, unsigned int flags);
>  void ioasid_is_in_set(struct ioasid_set *set, ioasid_t ioasid);
>  int ioasid_get(struct ioasid_set *set, ioasid_t ioasid);
>  int ioasid_get_locked(struct ioasid_set *set, ioasid_t ioasid);
> @@ -85,6 +138,9 @@ void ioasid_put_locked(struct ioasid_set *set, ioasid_t ioasid);
>  int ioasid_set_for_each_ioasid(struct ioasid_set *sdata,
>  			       void (*fn)(ioasid_t id, void *data),
>  			       void *data);
> +int ioasid_register_notifier_mm(struct mm_struct *mm, struct notifier_block *nb);
> +void ioasid_unregister_notifier_mm(struct mm_struct *mm, struct notifier_block *nb);

These need stubs for !CONFIG_IOASID

> +
>  #else /* !CONFIG_IOASID */
>  static inline void ioasid_install_capacity(ioasid_t total)
>  {
> @@ -124,6 +180,20 @@ static inline void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid, bool (*
>  	return NULL;
>  }
>  
> +static inline int ioasid_register_notifier(struct notifier_block *nb)

Missing set argument

Thanks,
Jean

> +{
> +	return -ENOTSUPP;
> +}
> +
> +static inline void ioasid_unregister_notifier(struct notifier_block *nb)
> +{
> +}
> +
> +static inline int ioasid_notify(ioasid_t ioasid, enum ioasid_notify_val cmd, unsigned int flags)
> +{
> +	return -ENOTSUPP;
> +}
> +
>  static inline int ioasid_register_allocator(struct ioasid_allocator_ops *allocator)
>  {
>  	return -ENOTSUPP;
> -- 
> 2.7.4
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  reply	other threads:[~2020-08-25 10:26 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-22  4:35 [PATCH v2 0/9] IOASID extensions for guest SVA Jacob Pan
2020-08-22  4:35 ` [PATCH v2 1/9] docs: Document IO Address Space ID (IOASID) APIs Jacob Pan
2020-08-23  7:05   ` Lu Baolu
2020-08-28 17:01     ` Jacob Pan
2020-08-24 10:32   ` Jean-Philippe Brucker
2020-08-27 16:21     ` Auger Eric
2020-09-01 16:56       ` Jacob Pan
2020-09-07  8:03         ` Auger Eric
2020-09-08 17:29           ` Jacob Pan
2020-08-28 22:24     ` Jacob Pan
2020-08-22  4:35 ` [PATCH v2 2/9] iommu/ioasid: Rename ioasid_set_data() Jacob Pan
2020-08-24 18:29   ` Jean-Philippe Brucker
2020-09-01 11:51   ` Auger Eric
2020-08-22  4:35 ` [PATCH v2 3/9] iommu/ioasid: Introduce ioasid_set APIs Jacob Pan
2020-08-22 12:53   ` kernel test robot
2020-08-24  2:24   ` Lu Baolu
2020-09-01 21:28     ` Jacob Pan
2020-09-02  2:39       ` Lu Baolu
2020-08-24 18:28   ` Jean-Philippe Brucker
2020-08-24 18:30     ` Randy Dunlap
2020-09-02 21:46       ` Jacob Pan
2020-08-24 18:34     ` Randy Dunlap
2020-09-02 21:47       ` Jacob Pan
2020-09-02 21:44     ` Jacob Pan
2020-09-01 11:51   ` Auger Eric
2020-09-03 21:07     ` Jacob Pan
2020-09-07  8:04       ` Auger Eric
2020-08-22  4:35 ` [PATCH v2 4/9] iommu/ioasid: Add reference couting functions Jacob Pan
2020-08-24  2:26   ` Lu Baolu
2020-08-25 10:20     ` Jean-Philippe Brucker
2020-08-25 10:19   ` Jean-Philippe Brucker
2020-09-08 20:30     ` Jacob Pan
2020-09-01 12:13   ` Auger Eric
2020-09-08 20:49     ` Jacob Pan
2020-09-24 18:29   ` Shameerali Kolothum Thodi
2020-08-22  4:35 ` [PATCH v2 5/9] iommu/ioasid: Introduce ioasid_set private ID Jacob Pan
2020-08-22  8:36   ` kernel test robot
2020-08-22  9:03   ` kernel test robot
2020-08-25 10:22   ` Jean-Philippe Brucker
2020-09-08 22:19     ` Jacob Pan
2020-09-01 15:38   ` Auger Eric
2020-09-08 22:40     ` Jacob Pan
2020-09-10  9:18       ` Auger Eric
2020-08-22  4:35 ` [PATCH v2 6/9] iommu/ioasid: Introduce notification APIs Jacob Pan
2020-08-25 10:26   ` Jean-Philippe Brucker [this message]
2020-09-09 20:37     ` Jacob Pan
2020-09-01 16:49   ` Auger Eric
2020-09-09 22:58     ` Jacob Pan
2020-09-10  8:59       ` Auger Eric
2020-08-22  4:35 ` [PATCH v2 7/9] iommu/vt-d: Listen to IOASID notifications Jacob Pan
2020-09-01 17:03   ` Auger Eric
2020-09-10  4:54     ` Jacob Pan
2020-08-22  4:35 ` [PATCH v2 8/9] iommu/vt-d: Send IOASID bind/unbind notifications Jacob Pan
2020-08-22  4:35 ` [PATCH v2 9/9] iommu/vt-d: Store guest PASID during bind Jacob Pan
2020-09-01 17:08   ` Auger Eric
2020-09-10 17:12     ` Jacob Pan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200825102617.GD3252704@myrica \
    --to=jean-philippe@linaro.org \
    --cc=ashok.raj@intel.com \
    --cc=dwmw2@infradead.org \
    --cc=hao.wu@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.pan.linux@gmail.com \
    --cc=jean-philippe@linaro.com \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).