iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
	will@kernel.org, joro@8bytes.org, maz@kernel.org,
	robin.murphy@arm.com, alex.williamson@redhat.com
Cc: jean-philippe@linaro.org, vivek.gautam@arm.com, zhangfei.gao@linaro.org
Subject: [PATCH v13 02/15] iommu: Introduce bind/unbind_guest_msi
Date: Wed, 18 Nov 2020 12:21:38 +0100	[thread overview]
Message-ID: <20201118112151.25412-3-eric.auger@redhat.com> (raw)
In-Reply-To: <20201118112151.25412-1-eric.auger@redhat.com>

On ARM, MSI are translated by the SMMU. An IOVA is allocated
for each MSI doorbell. If both the host and the guest are exposed
with SMMUs, we end up with 2 different IOVAs allocated by each.
guest allocates an IOVA (gIOVA) to map onto the guest MSI
doorbell (gDB). The Host allocates another IOVA (hIOVA) to map
onto the physical doorbell (hDB).

So we end up with 2 untied mappings:
         S1            S2
gIOVA    ->    gDB
              hIOVA    ->    hDB

Currently the PCI device is programmed by the host with hIOVA
as MSI doorbell. So this does not work.

This patch introduces an API to pass gIOVA/gDB to the host so
that gIOVA can be reused by the host instead of re-allocating
a new IOVA. So the goal is to create the following nested mapping:

         S1            S2
gIOVA    ->    gDB     ->    hDB

and program the PCI device with gIOVA MSI doorbell.

In case we have several devices attached to this nested domain
(devices belonging to the same group), they cannot be isolated
on guest side either. So they should also end up in the same domain
on guest side. We will enforce that all the devices attached to
the host iommu domain use the same physical doorbell and similarly
a single virtual doorbell mapping gets registered (1 single
virtual doorbell is used on guest as well).

Signed-off-by: Eric Auger <eric.auger@redhat.com>

---
v7 -> v8:
- dummy iommu_unbind_guest_msi turned into a void function

v6 -> v7:
- remove the device handle parameter.
- Add comments saying there can only be a single MSI binding
  registered per iommu_domain
v5 -> v6:
-fix compile issue when IOMMU_API is not set

v3 -> v4:
- add unbind

v2 -> v3:
- add a struct device handle
---
 drivers/iommu/iommu.c | 37 +++++++++++++++++++++++++++++++++++++
 include/linux/iommu.h | 20 ++++++++++++++++++++
 2 files changed, 57 insertions(+)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 978fe34378fb..0b1f458b444f 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -2252,6 +2252,43 @@ static void __iommu_detach_device(struct iommu_domain *domain,
 	trace_detach_device_from_domain(dev);
 }
 
+/**
+ * iommu_bind_guest_msi - Passes the stage1 GIOVA/GPA mapping of a
+ * virtual doorbell
+ *
+ * @domain: iommu domain the stage 1 mapping will be attached to
+ * @iova: iova allocated by the guest
+ * @gpa: guest physical address of the virtual doorbell
+ * @size: granule size used for the mapping
+ *
+ * The associated IOVA can be reused by the host to create a nested
+ * stage2 binding mapping translating into the physical doorbell used
+ * by the devices attached to the domain.
+ *
+ * All devices within the domain must share the same physical doorbell.
+ * A single MSI GIOVA/GPA mapping can be attached to an iommu_domain.
+ */
+
+int iommu_bind_guest_msi(struct iommu_domain *domain,
+			 dma_addr_t giova, phys_addr_t gpa, size_t size)
+{
+	if (unlikely(!domain->ops->bind_guest_msi))
+		return -ENODEV;
+
+	return domain->ops->bind_guest_msi(domain, giova, gpa, size);
+}
+EXPORT_SYMBOL_GPL(iommu_bind_guest_msi);
+
+void iommu_unbind_guest_msi(struct iommu_domain *domain,
+			    dma_addr_t iova)
+{
+	if (unlikely(!domain->ops->unbind_guest_msi))
+		return;
+
+	domain->ops->unbind_guest_msi(domain, iova);
+}
+EXPORT_SYMBOL_GPL(iommu_unbind_guest_msi);
+
 void iommu_detach_device(struct iommu_domain *domain, struct device *dev)
 {
 	struct iommu_group *group;
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 464fcbecf841..35819bff03bc 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -225,6 +225,8 @@ struct iommu_iotlb_gather {
  * @sva_unbind_gpasid: unbind guest pasid and mm
  * @attach_pasid_table: attach a pasid table
  * @detach_pasid_table: detach the pasid table
+ * @bind_guest_msi: provides a stage1 giova/gpa MSI doorbell mapping
+ * @unbind_guest_msi: withdraw a stage1 giova/gpa MSI doorbell mapping
  * @def_domain_type: device default domain type, return value:
  *		- IOMMU_DOMAIN_IDENTITY: must use an identity domain
  *		- IOMMU_DOMAIN_DMA: must use a dma domain
@@ -305,6 +307,10 @@ struct iommu_ops {
 
 	int (*def_domain_type)(struct device *dev);
 
+	int (*bind_guest_msi)(struct iommu_domain *domain,
+			      dma_addr_t giova, phys_addr_t gpa, size_t size);
+	void (*unbind_guest_msi)(struct iommu_domain *domain, dma_addr_t giova);
+
 	unsigned long pgsize_bitmap;
 	struct module *owner;
 };
@@ -444,6 +450,10 @@ extern int iommu_attach_pasid_table(struct iommu_domain *domain,
 extern int iommu_uapi_attach_pasid_table(struct iommu_domain *domain,
 					 void __user *udata);
 extern void iommu_detach_pasid_table(struct iommu_domain *domain);
+extern int iommu_bind_guest_msi(struct iommu_domain *domain,
+				dma_addr_t giova, phys_addr_t gpa, size_t size);
+extern void iommu_unbind_guest_msi(struct iommu_domain *domain,
+				   dma_addr_t giova);
 extern struct iommu_domain *iommu_get_domain_for_dev(struct device *dev);
 extern struct iommu_domain *iommu_get_dma_domain(struct device *dev);
 extern int iommu_map(struct iommu_domain *domain, unsigned long iova,
@@ -1087,6 +1097,16 @@ static inline struct iommu_fwspec *dev_iommu_fwspec_get(struct device *dev)
 {
 	return NULL;
 }
+
+static inline
+int iommu_bind_guest_msi(struct iommu_domain *domain,
+			 dma_addr_t giova, phys_addr_t gpa, size_t size)
+{
+	return -ENODEV;
+}
+static inline
+void iommu_unbind_guest_msi(struct iommu_domain *domain, dma_addr_t giova) {}
+
 #endif /* CONFIG_IOMMU_API */
 
 /**
-- 
2.21.3

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2020-11-18 11:22 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-18 11:21 [PATCH v13 00/15] SMMUv3 Nested Stage Setup (IOMMU part) Eric Auger
2020-11-18 11:21 ` [PATCH v13 01/15] iommu: Introduce attach/detach_pasid_table API Eric Auger
2020-11-18 16:19   ` Jacob Pan
2020-11-19 17:02     ` Auger Eric
2021-02-01 11:27   ` Keqian Zhu
2021-02-01 17:18     ` Auger Eric
2020-11-18 11:21 ` Eric Auger [this message]
2021-02-01 11:52   ` [PATCH v13 02/15] iommu: Introduce bind/unbind_guest_msi Keqian Zhu
2021-02-12  8:55     ` Auger Eric
2021-02-18  8:43       ` Keqian Zhu
2021-02-18 10:35         ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 03/15] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2021-02-01 12:26   ` Keqian Zhu
2021-02-01 15:15     ` Jean-Philippe Brucker
2021-02-02  6:39       ` Keqian Zhu
2021-02-01 17:19     ` Auger Eric
2021-02-02  7:20       ` Keqian Zhu
2020-11-18 11:21 ` [PATCH v13 04/15] iommu/smmuv3: Allow s1 and s2 configs to coexist Eric Auger
2021-02-01 12:35   ` Keqian Zhu
2020-11-18 11:21 ` [PATCH v13 05/15] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2020-11-19  3:59   ` kernel test robot
2020-12-03 12:32   ` Kunkun Jiang
2020-12-03 13:01     ` Auger Eric
2020-12-03 13:23       ` Kunkun Jiang
2020-12-09 14:26   ` Shameerali Kolothum Thodi
2021-02-02  7:14   ` Keqian Zhu
2021-02-11 17:36     ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 06/15] iommu/smmuv3: Implement attach/detach_pasid_table Eric Auger
2021-02-02  8:03   ` Keqian Zhu
2021-02-11 17:35     ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 07/15] iommu/smmuv3: Allow stage 1 invalidation with unmanaged ASIDs Eric Auger
2020-12-01 13:33   ` Xingang Wang
2020-12-01 13:58     ` Auger Eric
2020-12-02 12:59       ` Wang Xingang
2020-12-03 18:42       ` Shameerali Kolothum Thodi
2020-12-04  9:53         ` Jean-Philippe Brucker
2020-12-04 10:20           ` Shameerali Kolothum Thodi
2020-12-04 10:23             ` Auger Eric
2021-01-14 16:58               ` Auger Eric
2021-01-14 17:09                 ` Shameerali Kolothum Thodi
2021-01-14 17:33                 ` Jean-Philippe Brucker
2021-01-14 18:00                   ` Auger Eric
2021-02-15 13:17         ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 08/15] iommu/smmuv3: Implement cache_invalidate Eric Auger
2021-01-16  2:24   ` chenxiang (M)
2020-11-18 11:21 ` [PATCH v13 09/15] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2020-11-18 11:21 ` [PATCH v13 10/15] iommu/smmuv3: Nested mode single MSI doorbell per domain enforcement Eric Auger
2020-11-18 11:21 ` [PATCH v13 11/15] iommu/smmuv3: Enforce incompatibility between nested mode and HW MSI regions Eric Auger
2020-11-18 11:21 ` [PATCH v13 12/15] iommu/smmuv3: Implement bind/unbind_guest_msi Eric Auger
2020-11-18 11:21 ` [PATCH v13 13/15] iommu/smmuv3: Report non recoverable faults Eric Auger
2020-11-18 11:21 ` [PATCH v13 14/15] iommu/smmuv3: Accept configs with more than one context descriptor Eric Auger
2020-11-18 11:21 ` [PATCH v13 15/15] iommu/smmuv3: Add PASID cache invalidation per PASID Eric Auger
2021-01-08 17:05 ` [PATCH v13 00/15] SMMUv3 Nested Stage Setup (IOMMU part) Shameerali Kolothum Thodi
2021-01-13 15:37   ` Auger Eric
2021-02-21 18:21   ` Auger Eric
2021-02-22  8:56     ` Shameerali Kolothum Thodi
2021-03-15 18:04 ` Krishna Reddy
2021-03-16  8:22   ` Auger Eric
2021-03-16 18:10     ` Krishna Reddy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201118112151.25412-3-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.org \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=vivek.gautam@arm.com \
    --cc=will@kernel.org \
    --cc=zhangfei.gao@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).