iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Paul Menzel <pmenzel+linux-iommu@molgen.mpg.de>
To: "Jörg Rödel" <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A`
Date: Tue, 17 Jul 2018 18:02:07 +0200	[thread overview]
Message-ID: <605ca165-0071-eb7f-4c0d-b1e76ddd0e05@molgen.mpg.de> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 6095 bytes --]

Dear Linux folks,


On a MSI B350M MORTAR with Linux 4.18-rc5+ and Debian Sid/unstable the
three error messages below is shown.

```
$ git log --oneline -1
30b06abfb92b (HEAD -> master, origin/master, origin/HEAD) Merge tag 'pinctrl-v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
$ git describe --dirty
v4.18-rc5-36-g30b06abfb92b
$ dmesg
[…]
[    0.145696] calling  pci_iommu_init+0x0/0x3f @ 1
[    0.145719] AMD-Vi: Unable to write to IOMMU perf counter.
[    0.145799] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.145800] pci 0000:00:00.2: PCI INT A: not connected
[    0.146241] iommu: Adding device 0000:00:01.0 to group 0
[    0.146449] iommu: Adding device 0000:00:01.2 to group 1
[    0.146646] iommu: Adding device 0000:00:08.0 to group 2
[    0.146855] iommu: Adding device 0000:00:08.1 to group 3
[    0.146881] iommu: Adding device 0000:00:08.2 to group 2
[    0.147075] iommu: Adding device 0000:00:14.0 to group 4
[    0.147096] iommu: Adding device 0000:00:14.3 to group 4
[    0.147304] iommu: Adding device 0000:00:18.0 to group 5
[    0.147325] iommu: Adding device 0000:00:18.1 to group 5
[    0.147345] iommu: Adding device 0000:00:18.2 to group 5
[    0.147366] iommu: Adding device 0000:00:18.3 to group 5
[    0.147394] iommu: Adding device 0000:00:18.4 to group 5
[    0.147414] iommu: Adding device 0000:00:18.5 to group 5
[    0.147435] iommu: Adding device 0000:00:18.6 to group 5
[    0.147455] iommu: Adding device 0000:00:18.7 to group 5
[    0.147658] iommu: Adding device 0000:15:00.0 to group 6
[    0.147692] iommu: Adding device 0000:15:00.1 to group 6
[    0.147734] iommu: Adding device 0000:15:00.2 to group 6
[    0.147775] iommu: Adding device 0000:16:00.0 to group 6
[    0.147833] iommu: Adding device 0000:16:01.0 to group 6
[    0.147855] iommu: Adding device 0000:16:04.0 to group 6
[    0.147887] iommu: Adding device 0000:18:00.0 to group 6
[    0.148157] iommu: Adding device 0000:38:00.0 to group 7
[    0.148234] iommu: Using direct mapping for device 0000:38:00.0
[    0.148332] iommu: Adding device 0000:38:00.1 to group 8
[    0.148373] iommu: Adding device 0000:38:00.2 to group 8
[    0.148412] iommu: Adding device 0000:38:00.3 to group 8
[    0.148452] iommu: Adding device 0000:38:00.4 to group 8
[    0.148491] iommu: Adding device 0000:38:00.6 to group 8
[    0.148514] iommu: Adding device 0000:39:00.0 to group 2
[    0.148759] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    0.148759] AMD-Vi: Extended features (0x4f77ef22294ada):
[    0.148760]  PPR NX GT IA GA PC GA_vAPIC
[    0.148762] AMD-Vi: Interrupt remapping enabled
[    0.148762] AMD-Vi: virtual APIC enabled
[    0.186463] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.187307] initcall pci_iommu_init+0x0/0x3f returned 0 after 40631 usecs
[…]
```

Is that a firmware problem, or can this be fixed in GNU/Linux?



Kind regards,

Paul


PS: Output of `lspci -nn`.

```
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15d0]
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Device [1022:15d1]
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:15d3]
00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge [1022:1452]
00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:15db]
00:08.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:15dc]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e8]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e9]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ea]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15eb]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ec]
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ed]
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ee]
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Device [1022:15ef]
15:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset USB 3.1 xHCI Controller [1022:43bb] (rev 02)
15:00.1 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset SATA Controller [1022:43b7] (rev 02)
15:00.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Device [1022:43b2] (rev 02)
16:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
16:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
16:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port [1022:43b4] (rev 02)
18:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
38:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev c8)
38:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15de]
38:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Device [1022:15df]
38:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e0]
38:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e1]
38:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Device [1022:15e3]
39:00.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7901] (rev 61)
```

[-- Attachment #1.2: 20180717–linux_4.18-rc5+–dmesg.txt --]
[-- Type: text/plain, Size: 148156 bytes --]

[    0.000000] Linux version 4.18.0-rc5+ (paul@tokeiihto) (gcc version 8.1.0 (Debian 8.1.0-10)) #1 SMP Tue Jul 17 11:43:33 CEST 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.0-rc5+ root=UUID=313f78e2-468f-4660-b236-d1de214bf6b4 ro noisapnp cryptomgr.notests apparmor=0 log_buf_len=4M initcall_debug quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009d7ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000009d1e5fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d1e6000-0x000000009d2d5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009d2d6000-0x000000009d3c7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d3c8000-0x000000009d790fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009d791000-0x000000009e5bffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009e5c0000-0x000000009e664fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009e665000-0x000000009effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x9d3c8000  ACPI=0x9d3c8000  SMBIOS=0x9e48d000  ESRT=0x9a826f98  MEMATTR=0x9a08e698 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: MSI MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.G1 05/17/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x41f340 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000420000000 aka 16896M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000009a826f98 to 0x000000009a826fd0.
[    0.000000] Base memory trampoline at [(____ptrval____)] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x261445000, 0x261445fff] PGTABLE
[    0.000000] BRK [0x261446000, 0x261446fff] PGTABLE
[    0.000000] BRK [0x261447000, 0x261447fff] PGTABLE
[    0.000000] BRK [0x261448000, 0x261448fff] PGTABLE
[    0.000000] BRK [0x261449000, 0x261449fff] PGTABLE
[    0.000000] BRK [0x26144a000, 0x26144afff] PGTABLE
[    0.000000] BRK [0x26144b000, 0x26144bfff] PGTABLE
[    0.000000] BRK [0x26144c000, 0x26144cfff] PGTABLE
[    0.000000] BRK [0x26144d000, 0x26144dfff] PGTABLE
[    0.000000] BRK [0x26144e000, 0x26144efff] PGTABLE
[    0.000000] BRK [0x26144f000, 0x26144ffff] PGTABLE
[    0.000000] BRK [0x261450000, 0x261450fff] PGTABLE
[    0.000000] log_buf_len: 4194304 bytes
[    0.000000] early log buf free: 125560(95%)
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36b23000-0x37588fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009D3C8000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000009D3C80A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000009D3CF8B8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624)
[    0.000000] ACPI: DSDT 0x000000009D3C81F0 0076C7 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000009D77AE00 000040
[    0.000000] ACPI: APIC 0x000000009D3CF9D0 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000009D3CFAB0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000009D3CFAF8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000009D3CFB98 005367 (v02 AMD    AmdTable 00000002 MSFT 02000002)
[    0.000000] ACPI: SSDT 0x000000009D3D4F00 0007DC (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x000000009D3D56E0 000810 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x000000009D3D5EF0 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x000000009D3D5F20 002D89 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x000000009D3D8CB0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x000000009D3D8CF0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: UEFI 0x000000009D3D8D28 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: IVRS 0x000000009D3D8D70 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.000000] ACPI: BGRT 0x000000009D3D8E40 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000009D3D8E78 000E96 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000009D3D9D10 000850 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000009D3DA560 001A41 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000009D3DBFA8 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: WSMT 0x000000009D3DC0A0 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f33b000-0x41f33ffff]
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Using PIT calibration value
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f33ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000003ffffff]
[    0.000000]   node   0: [mem 0x000000000400a000-0x0000000009d7ffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x000000009d1e5fff]
[    0.000000]   node   0: [mem 0x000000009d2d6000-0x000000009d3c7fff]
[    0.000000]   node   0: [mem 0x000000009e665000-0x000000009effffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f33ffff]
[    0.000000] Reserved but unavailable: 9880 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
[    0.000000] On node 0 totalpages: 3919016
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 28 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10024 pages used for memmap
[    0.000000]   DMA32 zone: 641481 pages, LIFO batch:31
[    0.000000]   Normal zone: 51149 pages used for memmap
[    0.000000]   Normal zone: 3273536 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
[    0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d1e6000-0x9d2d5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d3c8000-0x9d790fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d791000-0x9e5bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e5c0000-0x9e664fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u262144
[    0.000000] pcpu-alloc: s142744 r8192 d29288 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3857751
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.0-rc5+ root=UUID=313f78e2-468f-4660-b236-d1de214bf6b4 ro noisapnp cryptomgr.notests apparmor=0 log_buf_len=4M initcall_debug quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 15238692K/15676064K available (10252K kernel code, 1220K rwdata, 3232K rodata, 1544K init, 652K bss, 437372K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 31036 entries in 122 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 33024, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] calling  con_init+0x0/0x21c @ 0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] initcall con_init+0x0/0x21c returned 0 after 0 usecs
[    0.000000] calling  hvc_console_init+0x0/0x14 @ 0
[    0.000000] initcall hvc_console_init+0x0/0x14 returned 0 after 0 usecs
[    0.000000] calling  xen_cons_init+0x0/0x50 @ 0
[    0.000000] initcall xen_cons_init+0x0/0x50 returned 0 after 0 usecs
[    0.000000] calling  univ8250_console_init+0x0/0x27 @ 0
[    0.000000] initcall univ8250_console_init+0x0/0x27 returned 0 after 0 usecs
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.004000] Switched APIC routing to physical flat.
[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.024000] tsc: Fast TSC calibration failed
[    0.032000] tsc: PIT calibration matches HPET. 1 loops
[    0.032000] tsc: Detected 3500.087 MHz processor
[    0.032000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3273a380f38, max_idle_ns: 440795352925 ns
[    0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.17 BogoMIPS (lpj=14000348)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.032000] Security Framework initialized
[    0.032000] Yama: becoming mindful.
[    0.032000] calling  selinux_init+0x0/0x1c7 @ 0
[    0.032000] initcall selinux_init+0x0/0x1c7 returned 0 after 0 usecs
[    0.032000] calling  tomoyo_init+0x0/0x5b @ 0
[    0.032000] initcall tomoyo_init+0x0/0x5b returned 0 after 0 usecs
[    0.032000] calling  apparmor_init+0x0/0x2d5 @ 0
[    0.032000] AppArmor: AppArmor disabled by boot time parameter
[    0.032000] initcall apparmor_init+0x0/0x2d5 returned 0 after 0 usecs
[    0.032000] calling  integrity_iintcache_init+0x0/0x2e @ 0
[    0.032000] initcall integrity_iintcache_init+0x0/0x2e returned 0 after 0 usecs
[    0.037250] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.038495] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.038605] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.038642] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.039106] CPU: Physical Processor ID: 0
[    0.039107] CPU: Processor Core ID: 0
[    0.039213] mce: CPU supports 23 MCE banks
[    0.039229] LVT offset 1 assigned for vector 0xf9
[    0.039276] LVT offset 2 assigned for vector 0xf4
[    0.039286] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.039286] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.039287] Spectre V2 : Mitigation: Full AMD retpoline
[    0.039288] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.039289] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.042899] Freeing SMP alternatives memory: 24K
[    0.048000] smpboot: CPU0: AMD Ryzen 3 2200G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
[    0.048000] calling  trace_init_flags_sys_exit+0x0/0xf @ 1
[    0.048000] initcall trace_init_flags_sys_exit+0x0/0xf returned 0 after 0 usecs
[    0.048000] calling  trace_init_flags_sys_enter+0x0/0xf @ 1
[    0.048000] initcall trace_init_flags_sys_enter+0x0/0xf returned 0 after 0 usecs
[    0.048000] calling  init_hw_perf_events+0x0/0x5d2 @ 1
[    0.048000] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.048000] ... version:                0
[    0.048000] ... bit width:              48
[    0.048000] ... generic registers:      6
[    0.048000] ... value mask:             0000ffffffffffff
[    0.048000] ... max period:             00007fffffffffff
[    0.048000] ... fixed-purpose events:   0
[    0.048000] ... event mask:             000000000000003f
[    0.048000] initcall init_hw_perf_events+0x0/0x5d2 returned 0 after 0 usecs
[    0.048000] calling  init_real_mode+0x0/0x1b3 @ 1
[    0.048000] initcall init_real_mode+0x0/0x1b3 returned 0 after 0 usecs
[    0.048000] calling  trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1
[    0.048000] initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs
[    0.048000] calling  register_nmi_cpu_backtrace_handler+0x0/0x16 @ 1
[    0.048000] initcall register_nmi_cpu_backtrace_handler+0x0/0x16 returned 0 after 0 usecs
[    0.048000] calling  early_efi_map_fb+0x0/0x34 @ 1
[    0.048000] initcall early_efi_map_fb+0x0/0x34 returned 0 after 0 usecs
[    0.048000] calling  spawn_ksoftirqd+0x0/0x40 @ 1
[    0.048000] initcall spawn_ksoftirqd+0x0/0x40 returned 0 after 0 usecs
[    0.048000] calling  migration_init+0x0/0x34 @ 1
[    0.048000] initcall migration_init+0x0/0x34 returned 0 after 0 usecs
[    0.048000] calling  check_cpu_stall_init+0x0/0x1b @ 1
[    0.048000] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[    0.048000] calling  srcu_bootup_announce+0x0/0x30 @ 1
[    0.048000] Hierarchical SRCU implementation.
[    0.048000] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[    0.048000] calling  rcu_spawn_gp_kthread+0x0/0x128 @ 1
[    0.048000] initcall rcu_spawn_gp_kthread+0x0/0x128 returned 0 after 0 usecs
[    0.048000] calling  cpu_stop_init+0x0/0x8d @ 1
[    0.048000] initcall cpu_stop_init+0x0/0x8d returned 0 after 0 usecs
[    0.048000] calling  init_events+0x0/0x40 @ 1
[    0.048000] initcall init_events+0x0/0x40 returned 0 after 0 usecs
[    0.048000] calling  init_trace_printk+0x0/0xc @ 1
[    0.048000] initcall init_trace_printk+0x0/0xc returned 0 after 0 usecs
[    0.048000] calling  event_trace_enable_again+0x0/0x21 @ 1
[    0.048000] initcall event_trace_enable_again+0x0/0x21 returned 0 after 0 usecs
[    0.048000] calling  jump_label_init_module+0x0/0x11 @ 1
[    0.048000] initcall jump_label_init_module+0x0/0x11 returned 0 after 0 usecs
[    0.048000] calling  dynamic_debug_init+0x0/0x23a @ 1
[    0.048000] initcall dynamic_debug_init+0x0/0x23a returned 0 after 0 usecs
[    0.048000] calling  rand_initialize+0x0/0x60 @ 1
[    0.048000] initcall rand_initialize+0x0/0x60 returned 0 after 0 usecs
[    0.048000] calling  initialize_ptr_random+0x0/0x35 @ 1
[    0.048000] initcall initialize_ptr_random+0x0/0x35 returned 0 after 0 usecs
[    0.048000] smp: Bringing up secondary CPUs ...
[    0.048000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.048000] x86: Booting SMP configuration:
[    0.048000] .... node  #0, CPUs:        #1  #2  #3
[    0.054472] smp: Brought up 1 node, 4 CPUs
[    0.054472] smpboot: Max logical packages: 4
[    0.054472] smpboot: Total of 4 processors activated (28000.69 BogoMIPS)
[    0.054472] devtmpfs: initialized
[    0.056026] x86/mm: Memory block size: 128MB
[    0.057423] calling  ipc_ns_init+0x0/0x57 @ 1
[    0.057432] initcall ipc_ns_init+0x0/0x57 returned 0 after 0 usecs
[    0.057433] calling  init_mmap_min_addr+0x0/0x27 @ 1
[    0.057435] initcall init_mmap_min_addr+0x0/0x27 returned 0 after 0 usecs
[    0.057437] calling  net_ns_init+0x0/0x106 @ 1
[    0.057472] initcall net_ns_init+0x0/0x106 returned 0 after 0 usecs
[    0.057472] calling  xen_pvh_gnttab_setup+0x0/0x34 @ 1
[    0.057472] initcall xen_pvh_gnttab_setup+0x0/0x34 returned -19 after 0 usecs
[    0.057472] calling  e820__register_nvs_regions+0x0/0x38 @ 1
[    0.057472] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
[    0.057472] PM: Registering ACPI NVS region [mem 0x9d3c8000-0x9d790fff] (3969024 bytes)
[    0.057472] initcall e820__register_nvs_regions+0x0/0x38 returned 0 after 0 usecs
[    0.057472] calling  cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[    0.057472] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[    0.057472] calling  init_cpu_syscore+0x0/0xf @ 1
[    0.057472] initcall init_cpu_syscore+0x0/0xf returned 0 after 0 usecs
[    0.057472] calling  reboot_init+0x0/0x3d @ 1
[    0.057472] initcall reboot_init+0x0/0x3d returned 0 after 0 usecs
[    0.057472] calling  init_lapic_sysfs+0x0/0x21 @ 1
[    0.057472] initcall init_lapic_sysfs+0x0/0x21 returned 0 after 0 usecs
[    0.057472] calling  cpu_hotplug_pm_sync_init+0x0/0x14 @ 1
[    0.057472] initcall cpu_hotplug_pm_sync_init+0x0/0x14 returned 0 after 0 usecs
[    0.057472] calling  alloc_frozen_cpus+0x0/0x8 @ 1
[    0.057472] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[    0.057472] calling  wq_sysfs_init+0x0/0x2b @ 1
[    0.057472] initcall wq_sysfs_init+0x0/0x2b returned 0 after 0 usecs
[    0.057472] calling  ksysfs_init+0x0/0x93 @ 1
[    0.057472] initcall ksysfs_init+0x0/0x93 returned 0 after 0 usecs
[    0.057472] calling  pm_init+0x0/0x78 @ 1
[    0.057472] initcall pm_init+0x0/0x78 returned 0 after 0 usecs
[    0.057472] calling  pm_disk_init+0x0/0x18 @ 1
[    0.057472] initcall pm_disk_init+0x0/0x18 returned 0 after 0 usecs
[    0.057472] calling  swsusp_header_init+0x0/0x30 @ 1
[    0.057472] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[    0.057472] calling  rcu_set_runtime_mode+0x0/0x12 @ 1
[    0.057472] initcall rcu_set_runtime_mode+0x0/0x12 returned 0 after 0 usecs
[    0.057472] calling  init_jiffies_clocksource+0x0/0x18 @ 1
[    0.057472] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.057472] initcall init_jiffies_clocksource+0x0/0x18 returned 0 after 0 usecs
[    0.057472] calling  futex_init+0x0/0xf9 @ 1
[    0.057472] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.057472] initcall futex_init+0x0/0xf9 returned 0 after 0 usecs
[    0.057472] calling  cgroup_wq_init+0x0/0x2e @ 1
[    0.057472] initcall cgroup_wq_init+0x0/0x2e returned 0 after 0 usecs
[    0.057472] calling  cgroup1_wq_init+0x0/0x2e @ 1
[    0.057472] initcall cgroup1_wq_init+0x0/0x2e returned 0 after 0 usecs
[    0.057472] calling  ftrace_mod_cmd_init+0x0/0xc @ 1
[    0.057472] initcall ftrace_mod_cmd_init+0x0/0xc returned 0 after 0 usecs
[    0.057472] calling  init_graph_trace+0x0/0x5d @ 1
[    0.057472] initcall init_graph_trace+0x0/0x5d returned 0 after 0 usecs
[    0.057472] calling  init_per_zone_wmark_min+0x0/0x70 @ 1
[    0.057472] initcall init_per_zone_wmark_min+0x0/0x70 returned 0 after 0 usecs
[    0.057472] calling  init_zero_pfn+0x0/0x38 @ 1
[    0.057472] initcall init_zero_pfn+0x0/0x38 returned 0 after 0 usecs
[    0.057472] calling  memory_failure_init+0x0/0x9f @ 1
[    0.057472] initcall memory_failure_init+0x0/0x9f returned 0 after 0 usecs
[    0.057472] calling  fsnotify_init+0x0/0x49 @ 1
[    0.057472] initcall fsnotify_init+0x0/0x49 returned 0 after 0 usecs
[    0.057472] calling  filelock_init+0x0/0x8c @ 1
[    0.057472] initcall filelock_init+0x0/0x8c returned 0 after 0 usecs
[    0.057472] calling  init_script_binfmt+0x0/0x16 @ 1
[    0.057472] initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
[    0.057472] calling  init_elf_binfmt+0x0/0x16 @ 1
[    0.057472] initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[    0.057472] calling  init_compat_elf_binfmt+0x0/0x16 @ 1
[    0.057472] initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[    0.057472] calling  debugfs_init+0x0/0x51 @ 1
[    0.057472] initcall debugfs_init+0x0/0x51 returned 0 after 0 usecs
[    0.057472] calling  tracefs_init+0x0/0x3b @ 1
[    0.057472] initcall tracefs_init+0x0/0x3b returned 0 after 0 usecs
[    0.057472] calling  securityfs_init+0x0/0x69 @ 1
[    0.057472] initcall securityfs_init+0x0/0x69 returned 0 after 0 usecs
[    0.057472] calling  prandom_init+0x0/0xb8 @ 1
[    0.057472] initcall prandom_init+0x0/0xb8 returned 0 after 0 usecs
[    0.057472] calling  pinctrl_init+0x0/0xae @ 1
[    0.057472] pinctrl core: initialized pinctrl subsystem
[    0.057472] initcall pinctrl_init+0x0/0xae returned 0 after 0 usecs
[    0.057472] calling  gpiolib_dev_init+0x0/0xcb @ 1
[    0.057472] initcall gpiolib_dev_init+0x0/0xcb returned 0 after 0 usecs
[    0.057472] calling  sfi_sysfs_init+0x0/0xcd @ 1
[    0.057472] initcall sfi_sysfs_init+0x0/0xcd returned 0 after 0 usecs
[    0.057472] calling  regulator_init+0x0/0x8c @ 1
[    0.057472] initcall regulator_init+0x0/0x8c returned 0 after 0 usecs
[    0.057472] calling  iommu_init+0x0/0x2b @ 1
[    0.057472] initcall iommu_init+0x0/0x2b returned 0 after 0 usecs
[    0.057472] calling  component_debug_init+0x0/0x1d @ 1
[    0.057472] initcall component_debug_init+0x0/0x1d returned 0 after 0 usecs
[    0.057472] calling  opp_debug_init+0x0/0x3c @ 1
[    0.057472] initcall opp_debug_init+0x0/0x3c returned 0 after 0 usecs
[    0.057472] calling  cpufreq_core_init+0x0/0x4c @ 1
[    0.057472] initcall cpufreq_core_init+0x0/0x4c returned 0 after 0 usecs
[    0.057472] calling  cpuidle_init+0x0/0x3b @ 1
[    0.057472] initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
[    0.057472] calling  capsule_reboot_register+0x0/0x11 @ 1
[    0.057472] initcall capsule_reboot_register+0x0/0x11 returned 0 after 0 usecs
[    0.057472] calling  bsp_pm_check_init+0x0/0x14 @ 1
[    0.057472] initcall bsp_pm_check_init+0x0/0x14 returned 0 after 0 usecs
[    0.057472] calling  sock_init+0x0/0x9a @ 1
[    0.057472] initcall sock_init+0x0/0x9a returned 0 after 0 usecs
[    0.057472] calling  net_inuse_init+0x0/0x24 @ 1
[    0.057472] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[    0.057472] calling  net_defaults_init+0x0/0x24 @ 1
[    0.057472] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[    0.057472] calling  init_default_flow_dissectors+0x0/0x50 @ 1
[    0.057472] initcall init_default_flow_dissectors+0x0/0x50 returned 0 after 0 usecs
[    0.057472] calling  netpoll_init+0x0/0x28 @ 1
[    0.057472] initcall netpoll_init+0x0/0x28 returned 0 after 0 usecs
[    0.057472] calling  netlink_proto_init+0x0/0x160 @ 1
[    0.057472] NET: Registered protocol family 16
[    0.057472] initcall netlink_proto_init+0x0/0x160 returned 0 after 0 usecs
[    0.057472] calling  __gnttab_init+0x0/0x30 @ 1
[    0.057472] initcall __gnttab_init+0x0/0x30 returned -19 after 0 usecs
[    0.057476] calling  irq_sysfs_init+0x0/0x94 @ 1
[    0.057538] initcall irq_sysfs_init+0x0/0x94 returned 0 after 0 usecs
[    0.057539] calling  audit_init+0x0/0x16c @ 1
[    0.057540] audit: initializing netlink subsys (disabled)
[    0.057543] initcall audit_init+0x0/0x16c returned 0 after 0 usecs
[    0.057543] calling  bdi_class_init+0x0/0x49 @ 1
[    0.057543] audit: type=2000 audit(1531839057.056:1): state=initialized audit_enabled=0 res=1
[    0.057543] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs
[    0.057543] calling  mm_sysfs_init+0x0/0x29 @ 1
[    0.057543] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[    0.057543] calling  gpiolib_sysfs_init+0x0/0xa0 @ 1
[    0.057543] initcall gpiolib_sysfs_init+0x0/0xa0 returned 0 after 0 usecs
[    0.057543] calling  pcibus_class_init+0x0/0x18 @ 1
[    0.057543] initcall pcibus_class_init+0x0/0x18 returned 0 after 0 usecs
[    0.057543] calling  pci_driver_init+0x0/0x22 @ 1
[    0.057543] initcall pci_driver_init+0x0/0x22 returned 0 after 0 usecs
[    0.057543] calling  backlight_class_init+0x0/0xa6 @ 1
[    0.057543] initcall backlight_class_init+0x0/0xa6 returned 0 after 0 usecs
[    0.057543] calling  xenbus_init+0x0/0x2a1 @ 1
[    0.057543] initcall xenbus_init+0x0/0x2a1 returned -19 after 0 usecs
[    0.057543] calling  tty_class_init+0x0/0x34 @ 1
[    0.057543] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs
[    0.057543] calling  vtconsole_class_init+0x0/0xd8 @ 1
[    0.057543] initcall vtconsole_class_init+0x0/0xd8 returned 0 after 0 usecs
[    0.057543] calling  iommu_dev_init+0x0/0x18 @ 1
[    0.057543] initcall iommu_dev_init+0x0/0x18 returned 0 after 0 usecs
[    0.057543] calling  mipi_dsi_bus_init+0x0/0x11 @ 1
[    0.057543] initcall mipi_dsi_bus_init+0x0/0x11 returned 0 after 0 usecs
[    0.057543] calling  wakeup_sources_debugfs_init+0x0/0x24 @ 1
[    0.057543] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.057543] calling  register_node_type+0x0/0x2f @ 1
[    0.057543] initcall register_node_type+0x0/0x2f returned 0 after 0 usecs
[    0.057543] calling  regmap_initcall+0x0/0xd @ 1
[    0.057543] initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
[    0.057543] calling  spi_init+0x0/0x99 @ 1
[    0.057543] initcall spi_init+0x0/0x99 returned 0 after 0 usecs
[    0.057543] calling  i2c_init+0x0/0xb4 @ 1
[    0.057543] initcall i2c_init+0x0/0xb4 returned 0 after 0 usecs
[    0.057543] calling  init_ladder+0x0/0x24 @ 1
[    0.057543] cpuidle: using governor ladder
[    0.057543] initcall init_ladder+0x0/0x24 returned 0 after 0 usecs
[    0.057543] calling  init_menu+0x0/0x11 @ 1
[    0.057543] cpuidle: using governor menu
[    0.057543] initcall init_menu+0x0/0x11 returned 0 after 0 usecs
[    0.057543] calling  pcc_init+0x0/0x93 @ 1
[    0.057543] initcall pcc_init+0x0/0x93 returned -19 after 0 usecs
[    0.057543] calling  amd_postcore_init+0x0/0x115 @ 1
[    0.057543] initcall amd_postcore_init+0x0/0x115 returned 0 after 0 usecs
[    0.057543] calling  kobject_uevent_init+0x0/0xc @ 1
[    0.057543] initcall kobject_uevent_init+0x0/0xc returned 0 after 0 usecs
[    0.057543] calling  bts_init+0x0/0xbb @ 1
[    0.057543] initcall bts_init+0x0/0xbb returned -19 after 0 usecs
[    0.057543] calling  pt_init+0x0/0x352 @ 1
[    0.057543] initcall pt_init+0x0/0x352 returned -19 after 0 usecs
[    0.057543] calling  boot_params_ksysfs_init+0x0/0x271 @ 1
[    0.057543] initcall boot_params_ksysfs_init+0x0/0x271 returned 0 after 0 usecs
[    0.057543] calling  sbf_init+0x0/0xcb @ 1
[    0.057543] initcall sbf_init+0x0/0xcb returned 0 after 0 usecs
[    0.057543] calling  arch_kdebugfs_init+0x0/0x24 @ 1
[    0.057543] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.057543] calling  intel_pconfig_init+0x0/0xe9 @ 1
[    0.057543] initcall intel_pconfig_init+0x0/0xe9 returned 0 after 0 usecs
[    0.057543] calling  mtrr_if_init+0x0/0x5e @ 1
[    0.057543] initcall mtrr_if_init+0x0/0x5e returned 0 after 0 usecs
[    0.057543] calling  ffh_cstate_init+0x0/0x2a @ 1
[    0.057543] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
[    0.057543] calling  kvm_setup_pv_tlb_flush+0x0/0x76 @ 1
[    0.057543] initcall kvm_setup_pv_tlb_flush+0x0/0x76 returned 0 after 0 usecs
[    0.057543] calling  activate_jump_labels+0x0/0x32 @ 1
[    0.057543] initcall activate_jump_labels+0x0/0x32 returned 0 after 0 usecs
[    0.057543] calling  gigantic_pages_init+0x0/0x2f @ 1
[    0.057543] initcall gigantic_pages_init+0x0/0x2f returned 0 after 0 usecs
[    0.057543] calling  kcmp_cookies_init+0x0/0x38 @ 1
[    0.057543] initcall kcmp_cookies_init+0x0/0x38 returned 0 after 0 usecs
[    0.057543] calling  acpi_pci_init+0x0/0x62 @ 1
[    0.057543] ACPI: bus type PCI registered
[    0.057543] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.057543] initcall acpi_pci_init+0x0/0x62 returned 0 after 0 usecs
[    0.057543] calling  dma_bus_init+0x0/0xd5 @ 1
[    0.057543] initcall dma_bus_init+0x0/0xd5 returned 0 after 0 usecs
[    0.057543] calling  dma_channel_table_init+0x0/0xd7 @ 1
[    0.057543] initcall dma_channel_table_init+0x0/0xd7 returned 0 after 0 usecs
[    0.057543] calling  setup_vcpu_hotplug_event+0x0/0x31 @ 1
[    0.057543] initcall setup_vcpu_hotplug_event+0x0/0x31 returned -19 after 0 usecs
[    0.057543] calling  register_xen_pci_notifier+0x0/0x2d @ 1
[    0.057543] initcall register_xen_pci_notifier+0x0/0x2d returned 0 after 0 usecs
[    0.057543] calling  xen_pcpu_init+0x0/0xae @ 1
[    0.057543] initcall xen_pcpu_init+0x0/0xae returned -19 after 0 usecs
[    0.057543] calling  dmi_id_init+0x0/0x33d @ 1
[    0.060012] initcall dmi_id_init+0x0/0x33d returned 0 after 3906 usecs
[    0.060013] calling  pci_arch_init+0x0/0x66 @ 1
[    0.060031] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.060033] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.060039] PCI: Using configuration type 1 for base access
[    0.060041] initcall pci_arch_init+0x0/0x66 returned 0 after 0 usecs
[    0.060053] calling  init_vdso+0x0/0x40 @ 1
[    0.060059] initcall init_vdso+0x0/0x40 returned 0 after 0 usecs
[    0.060059] calling  sysenter_setup+0x0/0x14 @ 1
[    0.060059] initcall sysenter_setup+0x0/0x14 returned 0 after 0 usecs
[    0.060059] calling  fixup_ht_bug+0x0/0xa2 @ 1
[    0.060059] initcall fixup_ht_bug+0x0/0xa2 returned 0 after 0 usecs
[    0.060059] calling  topology_init+0x0/0xba @ 1
[    0.060290] initcall topology_init+0x0/0xba returned 0 after 0 usecs
[    0.060291] calling  mtrr_init_finialize+0x0/0x3f @ 1
[    0.060292] initcall mtrr_init_finialize+0x0/0x3f returned 0 after 0 usecs
[    0.060293] calling  uid_cache_init+0x0/0x9a @ 1
[    0.060295] initcall uid_cache_init+0x0/0x9a returned 0 after 0 usecs
[    0.060296] calling  param_sysfs_init+0x0/0x1ef @ 1
[    0.060723] initcall param_sysfs_init+0x0/0x1ef returned 0 after 0 usecs
[    0.060724] calling  user_namespace_sysctl_init+0x0/0x34 @ 1
[    0.060737] initcall user_namespace_sysctl_init+0x0/0x34 returned 0 after 0 usecs
[    0.060738] calling  proc_schedstat_init+0x0/0x25 @ 1
[    0.060740] initcall proc_schedstat_init+0x0/0x25 returned 0 after 0 usecs
[    0.060741] calling  pm_sysrq_init+0x0/0x19 @ 1
[    0.060746] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
[    0.060746] calling  create_proc_profile+0x0/0xd0 @ 1
[    0.060746] initcall create_proc_profile+0x0/0xd0 returned 0 after 0 usecs
[    0.060746] calling  crash_save_vmcoreinfo_init+0x0/0x5db @ 1
[    0.060746] initcall crash_save_vmcoreinfo_init+0x0/0x5db returned 0 after 0 usecs
[    0.060746] calling  crash_notes_memory_init+0x0/0x36 @ 1
[    0.060746] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
[    0.060746] calling  cgroup_sysfs_init+0x0/0x18 @ 1
[    0.060746] initcall cgroup_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[    0.060746] calling  cgroup_namespaces_init+0x0/0x8 @ 1
[    0.060746] initcall cgroup_namespaces_init+0x0/0x8 returned 0 after 0 usecs
[    0.060746] calling  user_namespaces_init+0x0/0x2d @ 1
[    0.060746] initcall user_namespaces_init+0x0/0x2d returned 0 after 0 usecs
[    0.060746] calling  hung_task_init+0x0/0x4f @ 1
[    0.060746] initcall hung_task_init+0x0/0x4f returned 0 after 0 usecs
[    0.060746] calling  dev_map_init+0x0/0x14 @ 1
[    0.060746] initcall dev_map_init+0x0/0x14 returned 0 after 0 usecs
[    0.060746] calling  bpf_offload_init+0x0/0x14 @ 1
[    0.060746] initcall bpf_offload_init+0x0/0x14 returned 0 after 0 usecs
[    0.060746] calling  stack_map_init+0x0/0x4e @ 1
[    0.060746] initcall stack_map_init+0x0/0x4e returned 0 after 0 usecs
[    0.060746] calling  oom_init+0x0/0x30 @ 1
[    0.060746] initcall oom_init+0x0/0x30 returned 0 after 0 usecs
[    0.060746] calling  cgwb_init+0x0/0x2e @ 1
[    0.060747] initcall cgwb_init+0x0/0x2e returned 0 after 0 usecs
[    0.060747] calling  default_bdi_init+0x0/0xad @ 1
[    0.060747] initcall default_bdi_init+0x0/0xad returned 0 after 0 usecs
[    0.060747] calling  percpu_enable_async+0x0/0xf @ 1
[    0.060747] initcall percpu_enable_async+0x0/0xf returned 0 after 0 usecs
[    0.060747] calling  kcompactd_init+0x0/0x90 @ 1
[    0.060747] initcall kcompactd_init+0x0/0x90 returned 0 after 0 usecs
[    0.060747] calling  init_reserve_notifier+0x0/0x1f @ 1
[    0.060747] initcall init_reserve_notifier+0x0/0x1f returned 0 after 0 usecs
[    0.060747] calling  init_admin_reserve+0x0/0x40 @ 1
[    0.060747] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[    0.060747] calling  init_user_reserve+0x0/0x40 @ 1
[    0.060747] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[    0.060747] calling  swap_init_sysfs+0x0/0x63 @ 1
[    0.060747] initcall swap_init_sysfs+0x0/0x63 returned 0 after 0 usecs
[    0.060747] calling  swapfile_init+0x0/0xad @ 1
[    0.060747] initcall swapfile_init+0x0/0xad returned 0 after 0 usecs
[    0.060747] calling  hugetlb_init+0x0/0x4fa @ 1
[    0.060747] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.060747] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.060747] initcall hugetlb_init+0x0/0x4fa returned 0 after 0 usecs
[    0.060747] calling  ksm_init+0x0/0x197 @ 1
[    0.060747] initcall ksm_init+0x0/0x197 returned 0 after 0 usecs
[    0.060747] calling  hugepage_init+0x0/0x155 @ 1
[    0.060747] initcall hugepage_init+0x0/0x155 returned 0 after 0 usecs
[    0.060747] calling  mem_cgroup_swap_init+0x0/0x52 @ 1
[    0.060747] initcall mem_cgroup_swap_init+0x0/0x52 returned 0 after 0 usecs
[    0.060747] calling  mem_cgroup_init+0x0/0x14b @ 1
[    0.060747] initcall mem_cgroup_init+0x0/0x14b returned 0 after 0 usecs
[    0.060747] calling  sel_ib_pkey_init+0x0/0x36 @ 1
[    0.060747] initcall sel_ib_pkey_init+0x0/0x36 returned 0 after 0 usecs
[    0.060747] calling  crypto_wq_init+0x0/0x31 @ 1
[    0.060747] initcall crypto_wq_init+0x0/0x31 returned 0 after 0 usecs
[    0.060747] calling  cryptomgr_init+0x0/0x11 @ 1
[    0.060747] initcall cryptomgr_init+0x0/0x11 returned 0 after 0 usecs
[    0.060747] calling  init_bio+0x0/0xd2 @ 1
[    0.060747] initcall init_bio+0x0/0xd2 returned 0 after 0 usecs
[    0.060747] calling  blk_settings_init+0x0/0x2a @ 1
[    0.060747] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[    0.060747] calling  blk_ioc_init+0x0/0x2a @ 1
[    0.060747] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[    0.060747] calling  blk_softirq_init+0x0/0x71 @ 1
[    0.060747] initcall blk_softirq_init+0x0/0x71 returned 0 after 0 usecs
[    0.060747] calling  blk_mq_init+0x0/0x2a @ 1
[    0.060747] initcall blk_mq_init+0x0/0x2a returned 0 after 0 usecs
[    0.060747] calling  genhd_device_init+0x0/0x76 @ 1
[    0.060747] initcall genhd_device_init+0x0/0x76 returned 0 after 0 usecs
[    0.060747] calling  irq_poll_setup+0x0/0x6c @ 1
[    0.060747] initcall irq_poll_setup+0x0/0x6c returned 0 after 0 usecs
[    0.060747] calling  byt_gpio_init+0x0/0x13 @ 1
[    0.060747] initcall byt_gpio_init+0x0/0x13 returned 0 after 0 usecs
[    0.060747] calling  chv_pinctrl_init+0x0/0x13 @ 1
[    0.060747] initcall chv_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[    0.060747] calling  bxt_pinctrl_init+0x0/0x13 @ 1
[    0.060747] initcall bxt_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[    0.060747] calling  spt_pinctrl_init+0x0/0x13 @ 1
[    0.060747] initcall spt_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[    0.060747] calling  gpiolib_debugfs_init+0x0/0x24 @ 1
[    0.060747] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.060747] calling  pwm_debugfs_init+0x0/0x24 @ 1
[    0.060747] initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.060747] calling  pwm_sysfs_init+0x0/0x18 @ 1
[    0.060747] initcall pwm_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[    0.060747] calling  pci_slot_init+0x0/0x40 @ 1
[    0.060747] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[    0.060747] calling  fbmem_init+0x0/0xdb @ 1
[    0.060747] initcall fbmem_init+0x0/0xdb returned 0 after 0 usecs
[    0.060747] calling  scan_for_dmi_ipmi+0x0/0xf4 @ 1
[    0.060747] initcall scan_for_dmi_ipmi+0x0/0xf4 returned 0 after 0 usecs
[    0.060747] calling  acpi_init+0x0/0x338 @ 1
[    0.060747] ACPI: Added _OSI(Module Device)
[    0.060747] ACPI: Added _OSI(Processor Device)
[    0.060747] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.060747] ACPI: Added _OSI(Processor Aggregator Device)
[    0.060747] ACPI: Added _OSI(Linux-Dell-Video)
[    0.068004] ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180531/dswload2-316)
[    0.068004] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221)
[    0.068004] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.068004] ACPI BIOS Error (bug): Failure creating [\_SB.SMIB], AE_ALREADY_EXISTS (20180531/dsfield-594)
[    0.068004] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.068789] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.070203] ACPI: Interpreter enabled
[    0.070214] ACPI: (supports S0 S3 S4 S5)
[    0.070215] ACPI: Using IOAPIC for interrupt routing
[    0.070432] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.070654] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.072449] ACPI: Power Resource [P0ST] (on)
[    0.072467] ACPI: Power Resource [P3ST] (on)
[    0.080017] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.080022] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.080172] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.080313] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.080323] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.080644] PCI host bridge to bus 0000:00
[    0.080646] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.080648] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.080649] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.080651] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.080652] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.080653] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.080655] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.080656] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.080658] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.080668] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[    0.080676] pci 0000:00:00.0: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.080679] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.080804] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[    0.080968] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.080975] pci 0000:00:01.0: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.080977] pci 0000:00:01.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.081090] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
[    0.081199] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.081332] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.081338] pci 0000:00:08.0: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.081340] pci 0000:00:08.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.081459] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[    0.081514] pci 0000:00:08.1: enabling Extended Tags
[    0.081570] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.081681] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[    0.081735] pci 0000:00:08.2: enabling Extended Tags
[    0.081788] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[    0.081913] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.082095] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.082280] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[    0.082283] pci 0000:00:18.0: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.082285] pci 0000:00:18.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.082347] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[    0.082350] pci 0000:00:18.1: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.082352] pci 0000:00:18.1: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.082407] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[    0.082410] pci 0000:00:18.2: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.082412] pci 0000:00:18.2: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.082466] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[    0.082469] pci 0000:00:18.3: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.082471] pci 0000:00:18.3: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.082533] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[    0.082535] pci 0000:00:18.4: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.082537] pci 0000:00:18.4: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.082592] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[    0.082595] pci 0000:00:18.5: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.082596] pci 0000:00:18.5: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.082657] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[    0.082660] pci 0000:00:18.6: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.082662] pci 0000:00:18.6: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.082716] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[    0.082719] pci 0000:00:18.7: calling  quirk_mmio_always_on+0x0/0x10 @ 1
[    0.082720] pci 0000:00:18.7: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[    0.082869] pci 0000:15:00.0: [1022:43bb] type 00 class 0x0c0330
[    0.082901] pci 0000:15:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
[    0.083008] pci 0000:15:00.0: PME# supported from D3hot D3cold
[    0.083106] pci 0000:15:00.1: [1022:43b7] type 00 class 0x010601
[    0.083172] pci 0000:15:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
[    0.083182] pci 0000:15:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
[    0.083237] pci 0000:15:00.1: PME# supported from D3hot D3cold
[    0.083319] pci 0000:15:00.2: [1022:43b2] type 01 class 0x060400
[    0.083421] pci 0000:15:00.2: PME# supported from D3hot D3cold
[    0.083550] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
[    0.083555] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.083559] pci 0000:00:01.2:   bridge window [mem 0xfe700000-0xfe8fffff]
[    0.083655] pci 0000:16:00.0: [1022:43b4] type 01 class 0x060400
[    0.083772] pci 0000:16:00.0: PME# supported from D3hot D3cold
[    0.083879] pci 0000:16:01.0: [1022:43b4] type 01 class 0x060400
[    0.083995] pci 0000:16:01.0: PME# supported from D3hot D3cold
[    0.084103] pci 0000:16:04.0: [1022:43b4] type 01 class 0x060400
[    0.084219] pci 0000:16:04.0: PME# supported from D3hot D3cold
[    0.084345] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
[    0.084351] pci 0000:15:00.2:   bridge window [io  0xf000-0xffff]
[    0.084355] pci 0000:15:00.2:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.084400] pci 0000:16:00.0: PCI bridge to [bus 17]
[    0.084485] pci 0000:18:00.0: [10ec:8168] type 00 class 0x020000
[    0.084534] pci 0000:18:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.084576] pci 0000:18:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit]
[    0.084602] pci 0000:18:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit]
[    0.084751] pci 0000:18:00.0: supports D1 D2
[    0.084752] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084956] pci 0000:16:01.0: PCI bridge to [bus 18]
[    0.084962] pci 0000:16:01.0:   bridge window [io  0xf000-0xffff]
[    0.084966] pci 0000:16:01.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.085026] pci 0000:16:04.0: PCI bridge to [bus 1b]
[    0.085166] pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000
[    0.085212] pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.085230] pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.085242] pci 0000:38:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.085254] pci 0000:38:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff]
[    0.085274] pci 0000:38:00.0: enabling Extended Tags
[    0.085282] pci 0000:38:00.0: calling  quirk_no_pm_reset+0x0/0x20 @ 1
[    0.085284] pci 0000:38:00.0: quirk_no_pm_reset+0x0/0x20 took 0 usecs
[    0.085287] pci 0000:38:00.0: calling  efifb_fixup_resources+0x0/0x130 @ 1
[    0.085289] pci 0000:38:00.0: BAR 0: assigned to efifb
[    0.085291] pci 0000:38:00.0: efifb_fixup_resources+0x0/0x130 took 0 usecs
[    0.085385] pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.085511] pci 0000:38:00.1: [1002:15de] type 00 class 0x040300
[    0.085540] pci 0000:38:00.1: reg 0x10: [mem 0xfe688000-0xfe68bfff]
[    0.085612] pci 0000:38:00.1: enabling Extended Tags
[    0.085676] pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.085747] pci 0000:38:00.2: [1022:15df] type 00 class 0x108000
[    0.085797] pci 0000:38:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff]
[    0.085829] pci 0000:38:00.2: reg 0x24: [mem 0xfe68c000-0xfe68dfff]
[    0.085849] pci 0000:38:00.2: enabling Extended Tags
[    0.086004] pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330
[    0.086039] pci 0000:38:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
[    0.086100] pci 0000:38:00.3: enabling Extended Tags
[    0.086172] pci 0000:38:00.3: PME# supported from D0 D3hot D3cold
[    0.086256] pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330
[    0.086290] pci 0000:38:00.4: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
[    0.086351] pci 0000:38:00.4: enabling Extended Tags
[    0.086423] pci 0000:38:00.4: PME# supported from D0 D3hot D3cold
[    0.086522] pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300
[    0.086551] pci 0000:38:00.6: reg 0x10: [mem 0xfe680000-0xfe687fff]
[    0.086623] pci 0000:38:00.6: enabling Extended Tags
[    0.086688] pci 0000:38:00.6: PME# supported from D0 D3hot D3cold
[    0.086832] pci 0000:00:08.1: PCI bridge to [bus 38]
[    0.086837] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.086841] pci 0000:00:08.1:   bridge window [mem 0xfe300000-0xfe6fffff]
[    0.086846] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.086921] pci 0000:39:00.0: [1022:7901] type 00 class 0x010601
[    0.087004] pci 0000:39:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
[    0.087024] pci 0000:39:00.0: enabling Extended Tags
[    0.087097] pci 0000:39:00.0: PME# supported from D3hot D3cold
[    0.087210] pci 0000:00:08.2: PCI bridge to [bus 39]
[    0.087217] pci 0000:00:08.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.087639] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.087683] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.087720] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.087769] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.087811] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.087847] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.087882] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.087915] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.088277] initcall acpi_init+0x0/0x338 returned 0 after 27343 usecs
[    0.088279] calling  pnp_init+0x0/0x11 @ 1
[    0.088283] initcall pnp_init+0x0/0x11 returned 0 after 0 usecs
[    0.088284] calling  balloon_init+0x0/0x1aa @ 1
[    0.088286] initcall balloon_init+0x0/0x1aa returned -19 after 0 usecs
[    0.088288] calling  xen_setup_shutdown_event+0x0/0x30 @ 1
[    0.088289] initcall xen_setup_shutdown_event+0x0/0x30 returned -19 after 0 usecs
[    0.088291] calling  xenbus_probe_backend_init+0x0/0x4e @ 1
[    0.088295] initcall xenbus_probe_backend_init+0x0/0x4e returned 0 after 0 usecs
[    0.088296] calling  xenbus_probe_frontend_init+0x0/0x4e @ 1
[    0.088307] initcall xenbus_probe_frontend_init+0x0/0x4e returned 0 after 0 usecs
[    0.088308] calling  xen_acpi_pad_init+0x0/0x3c @ 1
[    0.088310] initcall xen_acpi_pad_init+0x0/0x3c returned -19 after 0 usecs
[    0.088311] calling  misc_init+0x0/0xbf @ 1
[    0.088315] initcall misc_init+0x0/0xbf returned 0 after 0 usecs
[    0.088316] calling  vga_arb_device_init+0x0/0x248 @ 1
[    0.088325] pci 0000:38:00.0: vgaarb: setting as boot VGA device
[    0.088325] pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.088325] pci 0000:38:00.0: vgaarb: bridge control possible
[    0.088325] vgaarb: loaded
[    0.088325] initcall vga_arb_device_init+0x0/0x248 returned 0 after 0 usecs
[    0.088325] calling  cn_init+0x0/0xf0 @ 1
[    0.088325] initcall cn_init+0x0/0xf0 returned 0 after 0 usecs
[    0.088325] calling  dax_fs_init+0x0/0xbf @ 1
[    0.088325] initcall dax_fs_init+0x0/0xbf returned 0 after 0 usecs
[    0.088325] calling  dma_buf_init+0x0/0xaa @ 1
[    0.088325] initcall dma_buf_init+0x0/0xaa returned 0 after 0 usecs
[    0.088325] calling  serio_init+0x0/0x2a @ 1
[    0.088325] initcall serio_init+0x0/0x2a returned 0 after 0 usecs
[    0.088325] calling  input_init+0x0/0xfd @ 1
[    0.088325] initcall input_init+0x0/0xfd returned 0 after 0 usecs
[    0.088325] calling  rtc_init+0x0/0x4c @ 1
[    0.088325] initcall rtc_init+0x0/0x4c returned 0 after 0 usecs
[    0.088325] calling  dw_i2c_init_driver+0x0/0x13 @ 1
[    0.088325] initcall dw_i2c_init_driver+0x0/0x13 returned 0 after 0 usecs
[    0.088325] calling  pps_init+0x0/0xaa @ 1
[    0.088325] pps_core: LinuxPPS API ver. 1 registered
[    0.088325] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.088325] initcall pps_init+0x0/0xaa returned 0 after 0 usecs
[    0.088325] calling  ptp_init+0x0/0x99 @ 1
[    0.088325] PTP clock support registered
[    0.088325] initcall ptp_init+0x0/0x99 returned 0 after 0 usecs
[    0.088325] calling  power_supply_class_init+0x0/0x40 @ 1
[    0.088325] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs
[    0.088325] calling  hwmon_init+0x0/0xf9 @ 1
[    0.088325] initcall hwmon_init+0x0/0xf9 returned 0 after 0 usecs
[    0.088325] calling  edac_init+0x0/0x70 @ 1
[    0.088325] EDAC MC: Ver: 3.0.0
[    0.088325] initcall edac_init+0x0/0x70 returned 0 after 0 usecs
[    0.088325] calling  leds_init+0x0/0x3c @ 1
[    0.088325] initcall leds_init+0x0/0x3c returned 0 after 0 usecs
[    0.088325] calling  dmi_init+0x0/0x114 @ 1
[    0.088325] initcall dmi_init+0x0/0x114 returned 0 after 0 usecs
[    0.088325] calling  efisubsys_init+0x0/0x2cf @ 1
[    0.088325] Registered efivars operations
[    0.104085] initcall efisubsys_init+0x0/0x2cf returned 0 after 15625 usecs
[    0.104086] calling  devfreq_init+0x0/0xa1 @ 1
[    0.104092] initcall devfreq_init+0x0/0xa1 returned 0 after 0 usecs
[    0.104092] calling  ras_init+0x0/0xf @ 1
[    0.104092] initcall ras_init+0x0/0xf returned 0 after 0 usecs
[    0.104092] calling  nvmem_init+0x0/0x11 @ 1
[    0.104092] initcall nvmem_init+0x0/0x11 returned 0 after 0 usecs
[    0.104092] calling  pci_subsys_init+0x0/0x67 @ 1
[    0.104092] PCI: Using ACPI for IRQ routing
[    0.107014] PCI: pci_cache_line_size set to 64 bytes
[    0.107093] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[    0.107094] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.107094] e820: reserve RAM buffer [mem 0x9d1e6000-0x9fffffff]
[    0.107095] e820: reserve RAM buffer [mem 0x9d3c8000-0x9fffffff]
[    0.107096] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[    0.107096] e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
[    0.107098] initcall pci_subsys_init+0x0/0x67 returned 0 after 0 usecs
[    0.107099] calling  proto_init+0x0/0x11 @ 1
[    0.107109] initcall proto_init+0x0/0x11 returned 0 after 0 usecs
[    0.107110] calling  net_dev_init+0x0/0x1ff @ 1
[    0.107190] initcall net_dev_init+0x0/0x1ff returned 0 after 0 usecs
[    0.107192] calling  neigh_init+0x0/0x80 @ 1
[    0.107193] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
[    0.107194] calling  fib_notifier_init+0x0/0x11 @ 1
[    0.107195] initcall fib_notifier_init+0x0/0x11 returned 0 after 0 usecs
[    0.107196] calling  fib_rules_init+0x0/0xac @ 1
[    0.107198] initcall fib_rules_init+0x0/0xac returned 0 after 0 usecs
[    0.107199] calling  init_cgroup_netprio+0x0/0x14 @ 1
[    0.107200] initcall init_cgroup_netprio+0x0/0x14 returned 0 after 0 usecs
[    0.107201] calling  bpf_lwt_init+0x0/0x16 @ 1
[    0.107202] initcall bpf_lwt_init+0x0/0x16 returned 0 after 0 usecs
[    0.107204] calling  pktsched_init+0x0/0x10f @ 1
[    0.107207] initcall pktsched_init+0x0/0x10f returned 0 after 0 usecs
[    0.107208] calling  tc_filter_init+0x0/0xa3 @ 1
[    0.107212] initcall tc_filter_init+0x0/0xa3 returned 0 after 0 usecs
[    0.107213] calling  tc_action_init+0x0/0x69 @ 1
[    0.107222] initcall tc_action_init+0x0/0x69 returned 0 after 0 usecs
[    0.107223] calling  genl_init+0x0/0x36 @ 1
[    0.107227] initcall genl_init+0x0/0x36 returned 0 after 0 usecs
[    0.107228] calling  wireless_nlevent_init+0x0/0x3a @ 1
[    0.107230] initcall wireless_nlevent_init+0x0/0x3a returned 0 after 0 usecs
[    0.107231] calling  xen_mcfg_late+0x0/0xcd @ 1
[    0.107233] initcall xen_mcfg_late+0x0/0xcd returned 0 after 0 usecs
[    0.107234] calling  watchdog_init+0x0/0x91 @ 1
[    0.107236] initcall watchdog_init+0x0/0x91 returned 0 after 0 usecs
[    0.107236] calling  nmi_warning_debugfs+0x0/0x27 @ 1
[    0.107236] initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 0 usecs
[    0.107236] calling  save_microcode_in_initrd+0x0/0x9d @ 1
[    0.107236] initcall save_microcode_in_initrd+0x0/0x9d returned -22 after 0 usecs
[    0.107236] calling  hpet_late_init+0x0/0x104 @ 1
[    0.107236] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.107236] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.108002] initcall hpet_late_init+0x0/0x104 returned 0 after 3906 usecs
[    0.108002] calling  init_amd_nbs+0x0/0x115 @ 1
[    0.108010] initcall init_amd_nbs+0x0/0x115 returned 0 after 0 usecs
[    0.108011] calling  sugov_register+0x0/0x11 @ 1
[    0.108013] initcall sugov_register+0x0/0x11 returned 0 after 0 usecs
[    0.108014] calling  clocksource_done_booting+0x0/0x42 @ 1
[    0.108036] clocksource: Switched to clocksource tsc-early
[    0.108037] initcall clocksource_done_booting+0x0/0x42 returned 0 after 3 usecs
[    0.108038] calling  tracer_init_tracefs+0x0/0x1c6 @ 1
[    0.117889] initcall tracer_init_tracefs+0x0/0x1c6 returned 0 after 9649 usecs
[    0.117890] calling  init_trace_printk_function_export+0x0/0x2d @ 1
[    0.117892] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 0 usecs
[    0.117893] calling  init_graph_tracefs+0x0/0x2d @ 1
[    0.117905] initcall init_graph_tracefs+0x0/0x2d returned 0 after 10 usecs
[    0.117906] calling  init_kprobe_trace+0x0/0x8a @ 1
[    0.117908] initcall init_kprobe_trace+0x0/0x8a returned 0 after 1 usecs
[    0.117909] calling  init_uprobe_trace+0x0/0x4f @ 1
[    0.117911] initcall init_uprobe_trace+0x0/0x4f returned 0 after 0 usecs
[    0.117912] calling  bpf_init+0x0/0x48 @ 1
[    0.117917] initcall bpf_init+0x0/0x48 returned 0 after 3 usecs
[    0.117918] calling  init_pipe_fs+0x0/0x47 @ 1
[    0.117928] initcall init_pipe_fs+0x0/0x47 returned 0 after 8 usecs
[    0.117929] calling  cgroup_writeback_init+0x0/0x2b @ 1
[    0.117944] initcall cgroup_writeback_init+0x0/0x2b returned 0 after 14 usecs
[    0.117945] calling  inotify_user_setup+0x0/0x48 @ 1
[    0.117949] initcall inotify_user_setup+0x0/0x48 returned 0 after 2 usecs
[    0.117950] calling  eventpoll_init+0x0/0xc9 @ 1
[    0.117994] initcall eventpoll_init+0x0/0xc9 returned 0 after 41 usecs
[    0.117995] calling  anon_inode_init+0x0/0x5b @ 1
[    0.118000] initcall anon_inode_init+0x0/0x5b returned 0 after 4 usecs
[    0.118001] calling  init_dax_wait_table+0x0/0x40 @ 1
[    0.118014] initcall init_dax_wait_table+0x0/0x40 returned 0 after 12 usecs
[    0.118015] calling  proc_locks_init+0x0/0x28 @ 1
[    0.118026] initcall proc_locks_init+0x0/0x28 returned 0 after 8 usecs
[    0.118027] calling  dquot_init+0x0/0x11d @ 1
[    0.118027] VFS: Disk quotas dquot_6.6.0
[    0.118067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.118069] initcall dquot_init+0x0/0x11d returned 0 after 39 usecs
[    0.118070] calling  quota_init+0x0/0x24 @ 1
[    0.118083] initcall quota_init+0x0/0x24 returned 0 after 12 usecs
[    0.118084] calling  proc_cmdline_init+0x0/0x22 @ 1
[    0.118086] initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
[    0.118087] calling  proc_consoles_init+0x0/0x25 @ 1
[    0.118088] initcall proc_consoles_init+0x0/0x25 returned 0 after 0 usecs
[    0.118089] calling  proc_cpuinfo_init+0x0/0x1f @ 1
[    0.118091] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 0 usecs
[    0.118092] calling  proc_devices_init+0x0/0x25 @ 1
[    0.118093] initcall proc_devices_init+0x0/0x25 returned 0 after 0 usecs
[    0.118094] calling  proc_interrupts_init+0x0/0x25 @ 1
[    0.118095] initcall proc_interrupts_init+0x0/0x25 returned 0 after 0 usecs
[    0.118096] calling  proc_loadavg_init+0x0/0x22 @ 1
[    0.118098] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
[    0.118098] calling  proc_meminfo_init+0x0/0x22 @ 1
[    0.118100] initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
[    0.118101] calling  proc_stat_init+0x0/0x1f @ 1
[    0.118102] initcall proc_stat_init+0x0/0x1f returned 0 after 0 usecs
[    0.118103] calling  proc_uptime_init+0x0/0x22 @ 1
[    0.118104] initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
[    0.118105] calling  proc_version_init+0x0/0x22 @ 1
[    0.118107] initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
[    0.118108] calling  proc_softirqs_init+0x0/0x22 @ 1
[    0.118109] initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
[    0.118110] calling  proc_kcore_init+0x0/0xd0 @ 1
[    0.118115] initcall proc_kcore_init+0x0/0xd0 returned 0 after 4 usecs
[    0.118116] calling  vmcore_init+0x0/0x5d8 @ 1
[    0.118117] initcall vmcore_init+0x0/0x5d8 returned 0 after 0 usecs
[    0.118118] calling  proc_kmsg_init+0x0/0x22 @ 1
[    0.118120] initcall proc_kmsg_init+0x0/0x22 returned 0 after 0 usecs
[    0.118121] calling  proc_page_init+0x0/0x56 @ 1
[    0.118123] initcall proc_page_init+0x0/0x56 returned 0 after 0 usecs
[    0.118124] calling  init_ramfs_fs+0x0/0x20 @ 1
[    0.118125] initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
[    0.118126] calling  init_hugetlbfs_fs+0x0/0x17e @ 1
[    0.118177] initcall init_hugetlbfs_fs+0x0/0x17e returned 0 after 48 usecs
[    0.118178] calling  tomoyo_initerface_init+0x0/0x178 @ 1
[    0.118180] initcall tomoyo_initerface_init+0x0/0x178 returned 0 after 0 usecs
[    0.118181] calling  aa_create_aafs+0x0/0x3ad @ 1
[    0.118182] initcall aa_create_aafs+0x0/0x3ad returned 0 after 0 usecs
[    0.118183] calling  blk_scsi_ioctl_init+0x0/0x399 @ 1
[    0.118184] initcall blk_scsi_ioctl_init+0x0/0x399 returned 0 after 0 usecs
[    0.118185] calling  dynamic_debug_init_debugfs+0x0/0x62 @ 1
[    0.118189] initcall dynamic_debug_init_debugfs+0x0/0x62 returned 0 after 2 usecs
[    0.118190] calling  acpi_event_init+0x0/0x2d @ 1
[    0.118193] initcall acpi_event_init+0x0/0x2d returned 0 after 1 usecs
[    0.118195] calling  pnp_system_init+0x0/0x11 @ 1
[    0.118204] initcall pnp_system_init+0x0/0x11 returned 0 after 7 usecs
[    0.118205] calling  pnpacpi_init+0x0/0x6a @ 1
[    0.118205] pnp: PnP ACPI init
[    0.118360] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.118364] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.118415] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.118418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.118508] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.118644] system 00:03: [io  0x0a00-0x0a0f] has been reserved
[    0.118645] system 00:03: [io  0x0a10-0x0a1f] has been reserved
[    0.118646] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.118647] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.118649] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.118899] pnp 00:04: [dma 0 disabled]
[    0.118980] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.119168] pnp 00:05: [dma 0 disabled]
[    0.119209] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.119362] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.119363] system 00:06: [io  0x040b] has been reserved
[    0.119364] system 00:06: [io  0x04d6] has been reserved
[    0.119365] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.119366] system 00:06: [io  0x0c14] has been reserved
[    0.119367] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.119368] system 00:06: [io  0x0c52] has been reserved
[    0.119369] system 00:06: [io  0x0c6c] has been reserved
[    0.119370] system 00:06: [io  0x0c6f] has been reserved
[    0.119371] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
[    0.119372] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
[    0.119373] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
[    0.119374] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
[    0.119374] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.119375] system 00:06: [io  0x0800-0x089f] has been reserved
[    0.119376] system 00:06: [io  0x0b00-0x0b0f] has been reserved
[    0.119377] system 00:06: [io  0x0b20-0x0b3f] has been reserved
[    0.119378] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.119379] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.119380] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.119381] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.119382] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.119383] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.119385] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.119386] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.119387] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.119389] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.119693] pnp: PnP ACPI: found 7 devices
[    0.119695] initcall pnpacpi_init+0x0/0x6a returned 0 after 1453 usecs
[    0.119696] calling  chr_dev_init+0x0/0xa7 @ 1
[    0.120925] initcall chr_dev_init+0x0/0xa7 returned 0 after 1199 usecs
[    0.120927] calling  firmware_class_init+0x0/0xeb @ 1
[    0.120931] initcall firmware_class_init+0x0/0xeb returned 0 after 3 usecs
[    0.120932] calling  thermal_init+0x0/0xe1 @ 1
[    0.120938] initcall thermal_init+0x0/0xe1 returned 0 after 5 usecs
[    0.120940] calling  cpufreq_gov_performance_init+0x0/0x11 @ 1
[    0.120941] initcall cpufreq_gov_performance_init+0x0/0x11 returned 0 after 0 usecs
[    0.120943] calling  cpufreq_gov_dbs_init+0x0/0x11 @ 1
[    0.120944] initcall cpufreq_gov_dbs_init+0x0/0x11 returned 0 after 0 usecs
[    0.120945] calling  map_properties+0x0/0x52b @ 1
[    0.120946] initcall map_properties+0x0/0x52b returned 0 after 0 usecs
[    0.120947] calling  init_acpi_pm_clocksource+0x0/0xdb @ 1
[    0.125506] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.125508] initcall init_acpi_pm_clocksource+0x0/0xdb returned 0 after 4453 usecs
[    0.125509] calling  pcibios_assign_resources+0x0/0xca @ 1
[    0.125574] pci 0000:16:00.0: PCI bridge to [bus 17]
[    0.125588] pci 0000:16:01.0: PCI bridge to [bus 18]
[    0.125590] pci 0000:16:01.0:   bridge window [io  0xf000-0xffff]
[    0.125595] pci 0000:16:01.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.125604] pci 0000:16:04.0: PCI bridge to [bus 1b]
[    0.125616] pci 0000:15:00.2: PCI bridge to [bus 16-1b]
[    0.125618] pci 0000:15:00.2:   bridge window [io  0xf000-0xffff]
[    0.125622] pci 0000:15:00.2:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.125630] pci 0000:00:01.2: PCI bridge to [bus 15-1b]
[    0.125632] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.125637] pci 0000:00:01.2:   bridge window [mem 0xfe700000-0xfe8fffff]
[    0.125645] pci 0000:00:08.1: PCI bridge to [bus 38]
[    0.125647] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.125651] pci 0000:00:08.1:   bridge window [mem 0xfe300000-0xfe6fffff]
[    0.125655] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.125661] pci 0000:00:08.2: PCI bridge to [bus 39]
[    0.125665] pci 0000:00:08.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.125674] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.125675] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.125676] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.125677] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.125678] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.125679] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.125680] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.125680] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.125682] pci_bus 0000:15: resource 0 [io  0xf000-0xffff]
[    0.125682] pci_bus 0000:15: resource 1 [mem 0xfe700000-0xfe8fffff]
[    0.125683] pci_bus 0000:16: resource 0 [io  0xf000-0xffff]
[    0.125684] pci_bus 0000:16: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.125685] pci_bus 0000:18: resource 0 [io  0xf000-0xffff]
[    0.125686] pci_bus 0000:18: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.125687] pci_bus 0000:38: resource 0 [io  0xe000-0xefff]
[    0.125688] pci_bus 0000:38: resource 1 [mem 0xfe300000-0xfe6fffff]
[    0.125688] pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.125690] pci_bus 0000:39: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.125717] initcall pcibios_assign_resources+0x0/0xca returned 0 after 202 usecs
[    0.125718] calling  sysctl_core_init+0x0/0x2b @ 1
[    0.125728] initcall sysctl_core_init+0x0/0x2b returned 0 after 9 usecs
[    0.125729] calling  eth_offload_init+0x0/0x14 @ 1
[    0.125731] initcall eth_offload_init+0x0/0x14 returned 0 after 0 usecs
[    0.125732] calling  inet_init+0x0/0x272 @ 1
[    0.125912] NET: Registered protocol family 2
[    0.126146] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.126181] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.126331] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.126447] TCP: Hash tables configured (established 131072 bind 65536)
[    0.126496] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.126530] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.126612] initcall inet_init+0x0/0x272 returned 0 after 858 usecs
[    0.126614] calling  ipv4_offload_init+0x0/0x74 @ 1
[    0.126615] initcall ipv4_offload_init+0x0/0x74 returned 0 after 0 usecs
[    0.126616] calling  af_unix_init+0x0/0x4e @ 1
[    0.126617] NET: Registered protocol family 1
[    0.126620] initcall af_unix_init+0x0/0x4e returned 0 after 3 usecs
[    0.126622] calling  ipv6_offload_init+0x0/0x7f @ 1
[    0.126623] initcall ipv6_offload_init+0x0/0x7f returned 0 after 0 usecs
[    0.126625] calling  pci_apply_final_quirks+0x0/0x125 @ 1
[    0.126660] pci 0000:15:00.0: calling  quirk_usb_early_handoff+0x0/0x6c3 @ 1
[    0.126785] pci 0000:15:00.0: quirk_usb_early_handoff+0x0/0x6c3 took 119 usecs
[    0.126802] pci 0000:38:00.0: calling  pci_fixup_video+0x0/0x110 @ 1
[    0.126810] pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.126811] pci 0000:38:00.0: pci_fixup_video+0x0/0x110 took 7 usecs
[    0.126815] pci 0000:38:00.1: calling  quirk_gpu_hda+0x0/0xa0 @ 1
[    0.126819] pci 0000:38:00.1: Linked as a consumer to 0000:38:00.0
[    0.126823] pci 0000:38:00.1: quirk_gpu_hda+0x0/0xa0 took 5 usecs
[    0.126829] pci 0000:38:00.3: calling  quirk_usb_early_handoff+0x0/0x6c3 @ 1
[    0.126989] pci 0000:38:00.3: quirk_usb_early_handoff+0x0/0x6c3 took 153 usecs
[    0.126992] pci 0000:38:00.4: calling  quirk_usb_early_handoff+0x0/0x6c3 @ 1
[    0.127065] pci 0000:38:00.4: quirk_usb_early_handoff+0x0/0x6c3 took 69 usecs
[    0.127069] pci 0000:38:00.6: calling  quirk_gpu_hda+0x0/0xa0 @ 1
[    0.127070] pci 0000:38:00.6: quirk_gpu_hda+0x0/0xa0 took 0 usecs
[    0.127075] PCI: CLS 64 bytes, default 64
[    0.127076] initcall pci_apply_final_quirks+0x0/0x125 returned 0 after 439 usecs
[    0.127077] calling  acpi_reserve_resources+0x0/0xeb @ 1
[    0.127079] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 usecs
[    0.127081] calling  populate_rootfs+0x0/0x10a @ 1
[    0.127121] Unpacking initramfs...
[    0.145680] Freeing initrd memory: 10648K
[    0.145694] initcall populate_rootfs+0x0/0x10a returned 0 after 18173 usecs
[    0.145696] calling  pci_iommu_init+0x0/0x3f @ 1
[    0.145719] AMD-Vi: Unable to write to IOMMU perf counter.
[    0.145799] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.145800] pci 0000:00:00.2: PCI INT A: not connected
[    0.146241] iommu: Adding device 0000:00:01.0 to group 0
[    0.146449] iommu: Adding device 0000:00:01.2 to group 1
[    0.146646] iommu: Adding device 0000:00:08.0 to group 2
[    0.146855] iommu: Adding device 0000:00:08.1 to group 3
[    0.146881] iommu: Adding device 0000:00:08.2 to group 2
[    0.147075] iommu: Adding device 0000:00:14.0 to group 4
[    0.147096] iommu: Adding device 0000:00:14.3 to group 4
[    0.147304] iommu: Adding device 0000:00:18.0 to group 5
[    0.147325] iommu: Adding device 0000:00:18.1 to group 5
[    0.147345] iommu: Adding device 0000:00:18.2 to group 5
[    0.147366] iommu: Adding device 0000:00:18.3 to group 5
[    0.147394] iommu: Adding device 0000:00:18.4 to group 5
[    0.147414] iommu: Adding device 0000:00:18.5 to group 5
[    0.147435] iommu: Adding device 0000:00:18.6 to group 5
[    0.147455] iommu: Adding device 0000:00:18.7 to group 5
[    0.147658] iommu: Adding device 0000:15:00.0 to group 6
[    0.147692] iommu: Adding device 0000:15:00.1 to group 6
[    0.147734] iommu: Adding device 0000:15:00.2 to group 6
[    0.147775] iommu: Adding device 0000:16:00.0 to group 6
[    0.147833] iommu: Adding device 0000:16:01.0 to group 6
[    0.147855] iommu: Adding device 0000:16:04.0 to group 6
[    0.147887] iommu: Adding device 0000:18:00.0 to group 6
[    0.148157] iommu: Adding device 0000:38:00.0 to group 7
[    0.148234] iommu: Using direct mapping for device 0000:38:00.0
[    0.148332] iommu: Adding device 0000:38:00.1 to group 8
[    0.148373] iommu: Adding device 0000:38:00.2 to group 8
[    0.148412] iommu: Adding device 0000:38:00.3 to group 8
[    0.148452] iommu: Adding device 0000:38:00.4 to group 8
[    0.148491] iommu: Adding device 0000:38:00.6 to group 8
[    0.148514] iommu: Adding device 0000:39:00.0 to group 2
[    0.148759] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    0.148759] AMD-Vi: Extended features (0x4f77ef22294ada):
[    0.148760]  PPR NX GT IA GA PC GA_vAPIC
[    0.148762] AMD-Vi: Interrupt remapping enabled
[    0.148762] AMD-Vi: virtual APIC enabled
[    0.186463] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.187307] initcall pci_iommu_init+0x0/0x3f returned 0 after 40631 usecs
[    0.187309] calling  calgary_fixup_tce_spaces+0x0/0xf1 @ 1
[    0.187311] initcall calgary_fixup_tce_spaces+0x0/0xf1 returned -19 after 0 usecs
[    0.187312] calling  ir_dev_scope_init+0x0/0x33 @ 1
[    0.187320] initcall ir_dev_scope_init+0x0/0x33 returned -19 after 5 usecs
[    0.187346] calling  ia32_binfmt_init+0x0/0x14 @ 1
[    0.187351] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 3 usecs
[    0.187353] calling  amd_uncore_init+0x0/0x275 @ 1
[    0.187362] amd_uncore: AMD NB counters detected
[    0.187365] amd_uncore: AMD LLC counters detected
[    0.187471] initcall amd_uncore_init+0x0/0x275 returned 0 after 113 usecs
[    0.187472] calling  amd_ibs_init+0x0/0x18d @ 1
[    0.187473] initcall amd_ibs_init+0x0/0x18d returned -19 after 0 usecs
[    0.187475] calling  amd_iommu_pc_init+0x0/0x270 @ 1
[    0.187476] initcall amd_iommu_pc_init+0x0/0x270 returned -19 after 0 usecs
[    0.187478] calling  msr_init+0x0/0xf1 @ 1
[    0.187481] initcall msr_init+0x0/0xf1 returned 0 after 1 usecs
[    0.187482] calling  register_kernel_offset_dumper+0x0/0x1b @ 1
[    0.187484] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
[    0.187485] calling  i8259A_init_ops+0x0/0x21 @ 1
[    0.187487] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs
[    0.187488] calling  init_tsc_clocksource+0x0/0xbe @ 1
[    0.187491] initcall init_tsc_clocksource+0x0/0xbe returned 0 after 1 usecs
[    0.187493] calling  add_rtc_cmos+0x0/0xcd @ 1
[    0.187495] initcall add_rtc_cmos+0x0/0xcd returned 0 after 1 usecs
[    0.187496] calling  i8237A_init_ops+0x0/0x37 @ 1
[    0.187510] initcall i8237A_init_ops+0x0/0x37 returned 0 after 12 usecs
[    0.187512] calling  thermal_throttle_init_device+0x0/0x42 @ 1
[    0.187514] initcall thermal_throttle_init_device+0x0/0x42 returned 0 after 0 usecs
[    0.187515] calling  ioapic_init_ops+0x0/0x14 @ 1
[    0.187517] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
[    0.187518] calling  register_e820_pmem+0x0/0x42 @ 1
[    0.187525] initcall register_e820_pmem+0x0/0x42 returned 0 after 5 usecs
[    0.187526] calling  add_pcspkr+0x0/0x6f @ 1
[    0.187549] initcall add_pcspkr+0x0/0x6f returned 0 after 20 usecs
[    0.187550] calling  sysfb_init+0x0/0x9f @ 1
[    0.187575] initcall sysfb_init+0x0/0x9f returned 0 after 22 usecs
[    0.187576] calling  audit_classes_init+0x0/0xaf @ 1
[    0.187580] initcall audit_classes_init+0x0/0xaf returned 0 after 1 usecs
[    0.187581] calling  pt_dump_init+0x0/0x42 @ 1
[    0.187583] initcall pt_dump_init+0x0/0x42 returned 0 after 0 usecs
[    0.187585] calling  init_aout_binfmt+0x0/0x16 @ 1
[    0.187587] initcall init_aout_binfmt+0x0/0x16 returned 0 after 0 usecs
[    0.187589] calling  iosf_mbi_init+0x0/0x1a @ 1
[    0.187605] initcall iosf_mbi_init+0x0/0x1a returned 0 after 14 usecs
[    0.187607] calling  proc_execdomains_init+0x0/0x22 @ 1
[    0.187610] initcall proc_execdomains_init+0x0/0x22 returned 0 after 2 usecs
[    0.187612] calling  register_warn_debugfs+0x0/0x24 @ 1
[    0.187618] initcall register_warn_debugfs+0x0/0x24 returned 0 after 3 usecs
[    0.187619] calling  cpuhp_sysfs_init+0x0/0x6d @ 1
[    0.187636] initcall cpuhp_sysfs_init+0x0/0x6d returned 0 after 15 usecs
[    0.187637] calling  ioresources_init+0x0/0x4a @ 1
[    0.187640] initcall ioresources_init+0x0/0x4a returned 0 after 2 usecs
[    0.187642] calling  init_sched_debug_procfs+0x0/0x2f @ 1
[    0.187645] initcall init_sched_debug_procfs+0x0/0x2f returned 0 after 1 usecs
[    0.187646] calling  snapshot_device_init+0x0/0x11 @ 1
[    0.187667] initcall snapshot_device_init+0x0/0x11 returned 0 after 19 usecs
[    0.187668] calling  irq_gc_init_ops+0x0/0x14 @ 1
[    0.187670] initcall irq_gc_init_ops+0x0/0x14 returned 0 after 0 usecs
[    0.187671] calling  irq_pm_init_ops+0x0/0x14 @ 1
[    0.187673] initcall irq_pm_init_ops+0x0/0x14 returned 0 after 0 usecs
[    0.187674] calling  klp_init+0x0/0x29 @ 1
[    0.187677] initcall klp_init+0x0/0x29 returned 0 after 1 usecs
[    0.187678] calling  timekeeping_init_ops+0x0/0x14 @ 1
[    0.187680] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
[    0.187682] calling  init_clocksource_sysfs+0x0/0x24 @ 1
[    0.187708] initcall init_clocksource_sysfs+0x0/0x24 returned 0 after 24 usecs
[    0.187710] calling  init_timer_list_procfs+0x0/0x32 @ 1
[    0.187712] initcall init_timer_list_procfs+0x0/0x32 returned 0 after 0 usecs
[    0.187714] calling  alarmtimer_init+0x0/0x134 @ 1
[    0.187748] initcall alarmtimer_init+0x0/0x134 returned 0 after 31 usecs
[    0.187750] calling  init_posix_timers+0x0/0x2a @ 1
[    0.187792] initcall init_posix_timers+0x0/0x2a returned 0 after 39 usecs
[    0.187794] calling  clockevents_init_sysfs+0x0/0xc9 @ 1
[    0.187989] initcall clockevents_init_sysfs+0x0/0xc9 returned 0 after 188 usecs
[    0.187990] calling  proc_dma_init+0x0/0x22 @ 1
[    0.187993] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
[    0.187994] calling  proc_modules_init+0x0/0x1f @ 1
[    0.187997] initcall proc_modules_init+0x0/0x1f returned 0 after 0 usecs
[    0.187998] calling  kallsyms_init+0x0/0x22 @ 1
[    0.188000] initcall kallsyms_init+0x0/0x22 returned 0 after 0 usecs
[    0.188002] calling  pid_namespaces_init+0x0/0x40 @ 1
[    0.188038] initcall pid_namespaces_init+0x0/0x40 returned 0 after 33 usecs
[    0.188040] calling  audit_watch_init+0x0/0x3c @ 1
[    0.188042] initcall audit_watch_init+0x0/0x3c returned 0 after 0 usecs
[    0.188043] calling  audit_fsnotify_init+0x0/0x3c @ 1
[    0.188045] initcall audit_fsnotify_init+0x0/0x3c returned 0 after 0 usecs
[    0.188046] calling  audit_tree_init+0x0/0x4d @ 1
[    0.188049] initcall audit_tree_init+0x0/0x4d returned 0 after 0 usecs
[    0.188050] calling  init_kprobes+0x0/0x1f9 @ 1
[    0.188251] initcall init_kprobes+0x0/0x1f9 returned 0 after 194 usecs
[    0.188253] calling  seccomp_sysctl_init+0x0/0x2c @ 1
[    0.188258] initcall seccomp_sysctl_init+0x0/0x2c returned 0 after 3 usecs
[    0.188259] calling  utsname_sysctl_init+0x0/0x14 @ 1
[    0.188266] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 4 usecs
[    0.188268] calling  init_tracepoints+0x0/0x28 @ 1
[    0.188270] initcall init_tracepoints+0x0/0x28 returned 0 after 0 usecs
[    0.188271] calling  stack_trace_init+0x0/0xb0 @ 1
[    0.188278] initcall stack_trace_init+0x0/0xb0 returned 0 after 5 usecs
[    0.188279] calling  init_mmio_trace+0x0/0xc @ 1
[    0.188282] initcall init_mmio_trace+0x0/0xc returned 0 after 1 usecs
[    0.188283] calling  init_blk_tracer+0x0/0x50 @ 1
[    0.188289] initcall init_blk_tracer+0x0/0x50 returned 0 after 5 usecs
[    0.188291] calling  perf_event_sysfs_init+0x0/0x84 @ 1
[    0.188418] initcall perf_event_sysfs_init+0x0/0x84 returned 0 after 122 usecs
[    0.188419] calling  init_uprobes+0x0/0x71 @ 1
[    0.188422] initcall init_uprobes+0x0/0x71 returned 0 after 1 usecs
[    0.188423] calling  padata_driver_init+0x0/0x39 @ 1
[    0.188425] initcall padata_driver_init+0x0/0x39 returned 0 after 0 usecs
[    0.188427] calling  system_trusted_keyring_init+0x0/0x61 @ 1
[    0.188427] Initialise system trusted keyrings
[    0.188445] initcall system_trusted_keyring_init+0x0/0x61 returned 0 after 16 usecs
[    0.188447] calling  kswapd_init+0x0/0x85 @ 1
[    0.188496] initcall kswapd_init+0x0/0x85 returned 0 after 46 usecs
[    0.188497] calling  extfrag_debug_init+0x0/0x78 @ 1
[    0.188511] initcall extfrag_debug_init+0x0/0x78 returned 0 after 11 usecs
[    0.188512] calling  mm_compute_batch_init+0x0/0x19 @ 1
[    0.188515] initcall mm_compute_batch_init+0x0/0x19 returned 0 after 0 usecs
[    0.188516] calling  slab_proc_init+0x0/0x22 @ 1
[    0.188519] initcall slab_proc_init+0x0/0x22 returned 0 after 1 usecs
[    0.188520] calling  workingset_init+0x0/0x80 @ 1
[    0.188522] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.188525] initcall workingset_init+0x0/0x80 returned 0 after 2 usecs
[    0.188526] calling  proc_vmalloc_init+0x0/0x30 @ 1
[    0.188528] initcall proc_vmalloc_init+0x0/0x30 returned 0 after 0 usecs
[    0.188530] calling  procswaps_init+0x0/0x1f @ 1
[    0.188533] initcall procswaps_init+0x0/0x1f returned 0 after 0 usecs
[    0.188534] calling  init_frontswap+0x0/0x91 @ 1
[    0.188541] initcall init_frontswap+0x0/0x91 returned 0 after 4 usecs
[    0.188542] calling  slab_sysfs_init+0x0/0xfa @ 1
[    0.190279] initcall slab_sysfs_init+0x0/0xfa returned 0 after 1694 usecs
[    0.190280] calling  init_zbud+0x0/0x20 @ 1
[    0.190281] zbud: loaded
[    0.190283] initcall init_zbud+0x0/0x20 returned 0 after 1 usecs
[    0.190284] calling  fcntl_init+0x0/0x2a @ 1
[    0.190287] initcall fcntl_init+0x0/0x2a returned 0 after 1 usecs
[    0.190288] calling  proc_filesystems_init+0x0/0x22 @ 1
[    0.190290] initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
[    0.190292] calling  start_dirtytime_writeback+0x0/0x2a @ 1
[    0.190294] initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 0 usecs
[    0.190295] calling  blkdev_init+0x0/0x20 @ 1
[    0.190307] initcall blkdev_init+0x0/0x20 returned 0 after 10 usecs
[    0.190308] calling  dio_init+0x0/0x2d @ 1
[    0.190311] initcall dio_init+0x0/0x2d returned 0 after 1 usecs
[    0.190312] calling  dnotify_init+0x0/0x79 @ 1
[    0.190382] initcall dnotify_init+0x0/0x79 returned 0 after 66 usecs
[    0.190383] calling  fanotify_user_setup+0x0/0x77 @ 1
[    0.190388] initcall fanotify_user_setup+0x0/0x77 returned 0 after 3 usecs
[    0.190390] calling  userfaultfd_init+0x0/0x2e @ 1
[    0.190437] initcall userfaultfd_init+0x0/0x2e returned 0 after 44 usecs
[    0.190438] calling  aio_setup+0x0/0x7b @ 1
[    0.190450] initcall aio_setup+0x0/0x7b returned 0 after 9 usecs
[    0.190452] calling  init_sys32_ioctl+0x0/0x28 @ 1
[    0.190598] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 141 usecs
[    0.190600] calling  init_devpts_fs+0x0/0x28 @ 1
[    0.190607] initcall init_devpts_fs+0x0/0x28 returned 0 after 5 usecs
[    0.190609] calling  init_pstore_fs+0x0/0x4d @ 1
[    0.190609] pstore: using deflate compression
[    0.190612] initcall init_pstore_fs+0x0/0x4d returned 0 after 1 usecs
[    0.190613] calling  ipc_init+0x0/0x5a @ 1
[    0.190632] initcall ipc_init+0x0/0x5a returned 0 after 17 usecs
[    0.190634] calling  ipc_sysctl_init+0x0/0x14 @ 1
[    0.190642] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 6 usecs
[    0.190644] calling  init_mqueue_fs+0x0/0xf1 @ 1
[    0.190715] initcall init_mqueue_fs+0x0/0xf1 returned 0 after 67 usecs
[    0.190716] calling  key_proc_init+0x0/0x64 @ 1
[    0.190719] initcall key_proc_init+0x0/0x64 returned 0 after 1 usecs
[    0.190721] calling  selinux_nf_ip_init+0x0/0x3b @ 1
[    0.190723] initcall selinux_nf_ip_init+0x0/0x3b returned 0 after 0 usecs
[    0.190724] calling  init_sel_fs+0x0/0x120 @ 1
[    0.190726] initcall init_sel_fs+0x0/0x120 returned 0 after 0 usecs
[    0.190727] calling  selnl_init+0x0/0x7d @ 1
[    0.190740] initcall selnl_init+0x0/0x7d returned 0 after 10 usecs
[    0.190741] calling  sel_netif_init+0x0/0x3b @ 1
[    0.190743] initcall sel_netif_init+0x0/0x3b returned 0 after 0 usecs
[    0.190745] calling  sel_netnode_init+0x0/0x36 @ 1
[    0.190746] initcall sel_netnode_init+0x0/0x36 returned 0 after 0 usecs
[    0.190748] calling  sel_netport_init+0x0/0x36 @ 1
[    0.190749] initcall sel_netport_init+0x0/0x36 returned 0 after 0 usecs
[    0.190751] calling  aurule_init+0x0/0x2b @ 1
[    0.190753] initcall aurule_init+0x0/0x2b returned 0 after 0 usecs
[    0.190754] calling  crypto_algapi_init+0x0/0xd @ 1
[    0.190757] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
[    0.190760] calling  rsa_init+0x0/0x50 @ 1
[    0.190818] alg: self-tests disabled
[    0.190824] initcall rsa_init+0x0/0x50 returned 0 after 61 usecs
[    0.190826] calling  hmac_module_init+0x0/0x11 @ 1
[    0.190827] initcall hmac_module_init+0x0/0x11 returned 0 after 0 usecs
[    0.190829] calling  crypto_null_mod_init+0x0/0x48 @ 1
[    0.190957] initcall crypto_null_mod_init+0x0/0x48 returned 0 after 123 usecs
[    0.190959] calling  md5_mod_init+0x0/0x11 @ 1
[    0.190997] initcall md5_mod_init+0x0/0x11 returned 0 after 35 usecs
[    0.190998] calling  sha1_generic_mod_init+0x0/0x11 @ 1
[    0.191029] initcall sha1_generic_mod_init+0x0/0x11 returned 0 after 28 usecs
[    0.191030] calling  sha256_generic_mod_init+0x0/0x16 @ 1
[    0.191090] initcall sha256_generic_mod_init+0x0/0x16 returned 0 after 58 usecs
[    0.191091] calling  aes_init+0x0/0x11 @ 1
[    0.191122] initcall aes_init+0x0/0x11 returned 0 after 28 usecs
[    0.191123] calling  deflate_mod_init+0x0/0x3f @ 1
[    0.191216] initcall deflate_mod_init+0x0/0x3f returned 0 after 89 usecs
[    0.191217] calling  crct10dif_mod_init+0x0/0x11 @ 1
[    0.191255] initcall crct10dif_mod_init+0x0/0x11 returned 0 after 36 usecs
[    0.191256] calling  lzo_mod_init+0x0/0x3a @ 1
[    0.191336] initcall lzo_mod_init+0x0/0x3a returned 0 after 76 usecs
[    0.191337] calling  asymmetric_key_init+0x0/0x11 @ 1
[    0.191338] Key type asymmetric registered
[    0.191339] initcall asymmetric_key_init+0x0/0x11 returned 0 after 1 usecs
[    0.191340] calling  x509_key_init+0x0/0x11 @ 1
[    0.191341] Asymmetric key parser 'x509' registered
[    0.191342] initcall x509_key_init+0x0/0x11 returned 0 after 0 usecs
[    0.191343] calling  proc_genhd_init+0x0/0x42 @ 1
[    0.191345] initcall proc_genhd_init+0x0/0x42 returned 0 after 1 usecs
[    0.191345] calling  bsg_init+0x0/0x196 @ 1
[    0.191399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.191400] initcall bsg_init+0x0/0x196 returned 0 after 52 usecs
[    0.191401] calling  throtl_init+0x0/0x41 @ 1
[    0.191441] initcall throtl_init+0x0/0x41 returned 0 after 38 usecs
[    0.191442] calling  noop_init+0x0/0x11 @ 1
[    0.191443] io scheduler noop registered
[    0.191444] initcall noop_init+0x0/0x11 returned 0 after 1 usecs
[    0.191445] calling  deadline_init+0x0/0x11 @ 1
[    0.191445] io scheduler deadline registered
[    0.191446] initcall deadline_init+0x0/0x11 returned 0 after 0 usecs
[    0.191447] calling  cfq_init+0x0/0x74 @ 1
[    0.191536] io scheduler cfq registered (default)
[    0.191537] initcall cfq_init+0x0/0x74 returned 0 after 87 usecs
[    0.191538] calling  deadline_init+0x0/0x11 @ 1
[    0.191538] io scheduler mq-deadline registered
[    0.191539] initcall deadline_init+0x0/0x11 returned 0 after 0 usecs
[    0.191540] calling  btree_module_init+0x0/0x25 @ 1
[    0.191542] initcall btree_module_init+0x0/0x25 returned 0 after 1 usecs
[    0.191543] calling  crc_t10dif_mod_init+0x0/0x39 @ 1
[    0.191544] initcall crc_t10dif_mod_init+0x0/0x39 returned 0 after 0 usecs
[    0.191545] calling  percpu_counter_startup+0x0/0x51 @ 1
[    0.191581] initcall percpu_counter_startup+0x0/0x51 returned 0 after 33 usecs
[    0.191581] calling  digsig_init+0x0/0x36 @ 1
[    0.191583] initcall digsig_init+0x0/0x36 returned 0 after 0 usecs
[    0.191583] calling  sg_pool_init+0x0/0xc6 @ 1
[    0.191614] initcall sg_pool_init+0x0/0xc6 returned 0 after 28 usecs
[    0.191614] calling  phy_core_init+0x0/0x4a @ 1
[    0.191617] initcall phy_core_init+0x0/0x4a returned 0 after 1 usecs
[    0.191618] calling  pci_proc_init+0x0/0x6c @ 1
[    0.191648] initcall pci_proc_init+0x0/0x6c returned 0 after 28 usecs
[    0.191648] calling  pcie_portdrv_init+0x0/0x35 @ 1
[    0.192623] initcall pcie_portdrv_init+0x0/0x35 returned 0 after 949 usecs
[    0.192624] calling  aer_service_init+0x0/0x32 @ 1
[    0.192672] pcieport 0000:00:01.2: AER enabled with IRQ 26
[    0.192676] initcall aer_service_init+0x0/0x32 returned 0 after 49 usecs
[    0.192677] calling  pcie_pme_service_init+0x0/0x11 @ 1
[    0.192685] pcieport 0000:00:01.2: Signaling PME with IRQ 26
[    0.192708] pcieport 0000:00:08.1: Signaling PME with IRQ 27
[    0.192729] pcieport 0000:00:08.2: Signaling PME with IRQ 28
[    0.192735] initcall pcie_pme_service_init+0x0/0x11 returned 0 after 55 usecs
[    0.192736] calling  dpc_service_init+0x0/0x11 @ 1
[    0.192746] initcall dpc_service_init+0x0/0x11 returned 0 after 9 usecs
[    0.192747] calling  pci_hotplug_init+0x0/0x31 @ 1
[    0.192748] initcall pci_hotplug_init+0x0/0x31 returned 0 after 0 usecs
[    0.192749] calling  pcied_init+0x0/0x56 @ 1
[    0.192752] initcall pcied_init+0x0/0x56 returned 0 after 2 usecs
[    0.192753] calling  xenfb_init+0x0/0x3b @ 1
[    0.192754] initcall xenfb_init+0x0/0x3b returned -19 after 0 usecs
[    0.192755] calling  vesafb_driver_init+0x0/0x13 @ 1
[    0.192760] initcall vesafb_driver_init+0x0/0x13 returned 0 after 4 usecs
[    0.192761] calling  efifb_driver_init+0x0/0x13 @ 1
[    0.192765] efifb: probing for efifb
[    0.192773] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.192774] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.192774] efifb: scrolling: redraw
[    0.192775] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.194117] Console: switching to colour frame buffer device 128x48
[    0.195376] fb0: EFI VGA frame buffer device
[    0.195381] initcall efifb_driver_init+0x0/0x13 returned 0 after 2557 usecs
[    0.195382] calling  intel_idle_init+0x0/0x5d5 @ 1
[    0.195383] initcall intel_idle_init+0x0/0x5d5 returned -19 after 0 usecs
[    0.195385] calling  acpi_processor_driver_init+0x0/0x91 @ 1
[    0.195416] Monitor-Mwait will be used to enter C-1 state
[    0.195773] initcall acpi_processor_driver_init+0x0/0x91 returned 0 after 377 usecs
[    0.195774] calling  acpi_hed_driver_init+0x0/0x11 @ 1
[    0.195809] initcall acpi_hed_driver_init+0x0/0x11 returned 0 after 33 usecs
[    0.195810] calling  bgrt_init+0x0/0xb5 @ 1
[    0.195814] initcall bgrt_init+0x0/0xb5 returned 0 after 2 usecs
[    0.195815] calling  erst_init+0x0/0x2f9 @ 1
[    0.195816] initcall erst_init+0x0/0x2f9 returned 0 after 0 usecs
[    0.195817] calling  ghes_init+0x0/0x137 @ 1
[    0.195819] initcall ghes_init+0x0/0x137 returned -19 after 0 usecs
[    0.195820] calling  extlog_init+0x0/0x36a @ 1
[    0.195821] initcall extlog_init+0x0/0x36a returned -19 after 0 usecs
[    0.195822] calling  gpio_clk_driver_init+0x0/0x13 @ 1
[    0.195826] initcall gpio_clk_driver_init+0x0/0x13 returned 0 after 3 usecs
[    0.195827] calling  plt_clk_driver_init+0x0/0x13 @ 1
[    0.195831] initcall plt_clk_driver_init+0x0/0x13 returned 0 after 2 usecs
[    0.195832] calling  st_clk_driver_init+0x0/0x13 @ 1
[    0.195843] initcall st_clk_driver_init+0x0/0x13 returned 0 after 9 usecs
[    0.195844] calling  xenbus_probe_initcall+0x0/0x42 @ 1
[    0.195845] initcall xenbus_probe_initcall+0x0/0x42 returned -19 after 0 usecs
[    0.195846] calling  xenbus_init+0x0/0x36 @ 1
[    0.195847] initcall xenbus_init+0x0/0x36 returned -19 after 0 usecs
[    0.195848] calling  xenbus_backend_init+0x0/0x3f @ 1
[    0.195850] initcall xenbus_backend_init+0x0/0x3f returned -19 after 0 usecs
[    0.195851] calling  hypervisor_subsys_init+0x0/0x25 @ 1
[    0.195852] initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
[    0.195853] calling  hyper_sysfs_init+0x0/0x177 @ 1
[    0.195854] initcall hyper_sysfs_init+0x0/0x177 returned -19 after 0 usecs
[    0.195855] calling  platform_driver_init+0x0/0x1a @ 1
[    0.195862] initcall platform_driver_init+0x0/0x1a returned 0 after 4 usecs
[    0.195862] calling  xen_late_init_mcelog+0x0/0x58 @ 1
[    0.195863] initcall xen_late_init_mcelog+0x0/0x58 returned -19 after 0 usecs
[    0.195864] calling  n_null_init+0x0/0x1f @ 1
[    0.195865] initcall n_null_init+0x0/0x1f returned 0 after 0 usecs
[    0.195866] calling  pty_init+0x0/0x1eb @ 1
[    0.195897] initcall pty_init+0x0/0x1eb returned 0 after 30 usecs
[    0.195898] calling  sysrq_init+0x0/0x6c @ 1
[    0.195900] initcall sysrq_init+0x0/0x6c returned 0 after 1 usecs
[    0.195901] calling  xen_hvc_init+0x0/0x258 @ 1
[    0.195902] initcall xen_hvc_init+0x0/0x258 returned -19 after 0 usecs
[    0.195903] calling  serial8250_init+0x0/0x15b @ 1
[    0.195904] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.216796] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.217184] initcall serial8250_init+0x0/0x15b returned 0 after 20780 usecs
[    0.217185] calling  serial_pci_driver_init+0x0/0x1a @ 1
[    0.217213] initcall serial_pci_driver_init+0x0/0x1a returned 0 after 27 usecs
[    0.217214] calling  exar_pci_driver_init+0x0/0x1a @ 1
[    0.217220] initcall exar_pci_driver_init+0x0/0x1a returned 0 after 5 usecs
[    0.217221] calling  dw8250_platform_driver_init+0x0/0x13 @ 1
[    0.217227] initcall dw8250_platform_driver_init+0x0/0x13 returned 0 after 4 usecs
[    0.217228] calling  mid8250_pci_driver_init+0x0/0x1a @ 1
[    0.217233] initcall mid8250_pci_driver_init+0x0/0x1a returned 0 after 3 usecs
[    0.217234] calling  hpet_init+0x0/0x65 @ 1
[    0.217324] initcall hpet_init+0x0/0x65 returned 0 after 86 usecs
[    0.217325] calling  agp_init+0x0/0x24 @ 1
[    0.217325] Linux agpgart interface v0.103
[    0.217326] initcall agp_init+0x0/0x24 returned 0 after 0 usecs
[    0.217327] calling  agp_amd64_mod_init+0x0/0x20 @ 1
[    0.217620] initcall agp_amd64_mod_init+0x0/0x20 returned -19 after 284 usecs
[    0.217620] calling  agp_intel_init+0x0/0x29 @ 1
[    0.217628] initcall agp_intel_init+0x0/0x29 returned 0 after 6 usecs
[    0.217629] calling  agp_sis_init+0x0/0x29 @ 1
[    0.217634] initcall agp_sis_init+0x0/0x29 returned 0 after 4 usecs
[    0.217635] calling  agp_via_init+0x0/0x29 @ 1
[    0.217641] initcall agp_via_init+0x0/0x29 returned 0 after 5 usecs
[    0.217642] calling  amd_iommu_v2_init+0x0/0x6e @ 1
[    0.217642] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.217684] initcall amd_iommu_v2_init+0x0/0x6e returned 0 after 40 usecs
[    0.217685] calling  cn_proc_init+0x0/0x36 @ 1
[    0.217687] initcall cn_proc_init+0x0/0x36 returned 0 after 0 usecs
[    0.217689] calling  topology_sysfs_init+0x0/0x30 @ 1
[    0.217706] initcall topology_sysfs_init+0x0/0x30 returned 0 after 16 usecs
[    0.217707] calling  cacheinfo_sysfs_init+0x0/0x2c @ 1
[    0.218306] initcall cacheinfo_sysfs_init+0x0/0x2c returned 168 after 583 usecs
[    0.218307] calling  devcoredump_init+0x0/0x18 @ 1
[    0.218311] initcall devcoredump_init+0x0/0x18 returned 0 after 2 usecs
[    0.218312] calling  cht_wc_driver_init+0x0/0x13 @ 1
[    0.218316] initcall cht_wc_driver_init+0x0/0x13 returned 0 after 3 usecs
[    0.218317] calling  mac_hid_init+0x0/0x22 @ 1
[    0.218321] initcall mac_hid_init+0x0/0x22 returned 0 after 2 usecs
[    0.218322] calling  net_olddevs_init+0x0/0x5d @ 1
[    0.218325] initcall net_olddevs_init+0x0/0x5d returned 0 after 2 usecs
[    0.218326] calling  cavium_ptp_driver_init+0x0/0x1a @ 1
[    0.218331] initcall cavium_ptp_driver_init+0x0/0x1a returned 0 after 4 usecs
[    0.218332] calling  ledtrig_usb_init+0x0/0x2e @ 1
[    0.218334] initcall ledtrig_usb_init+0x0/0x2e returned 0 after 1 usecs
[    0.218335] calling  i8042_init+0x0/0x46b @ 1
[    0.218345] i8042: PNP: No PS/2 controller found.
[    0.218346] initcall i8042_init+0x0/0x46b returned -19 after 9 usecs
[    0.218347] calling  input_leds_init+0x0/0x11 @ 1
[    0.218348] initcall input_leds_init+0x0/0x11 returned 0 after 0 usecs
[    0.218349] calling  mousedev_init+0x0/0x81 @ 1
[    0.218410] mousedev: PS/2 mouse device common for all mice
[    0.218411] initcall mousedev_init+0x0/0x81 returned 0 after 59 usecs
[    0.218412] calling  atkbd_init+0x0/0x26 @ 1
[    0.218419] initcall atkbd_init+0x0/0x26 returned 0 after 5 usecs
[    0.218420] calling  xenkbd_init+0x0/0x3b @ 1
[    0.218421] initcall xenkbd_init+0x0/0x3b returned -19 after 0 usecs
[    0.218422] calling  cmos_init+0x0/0x6a @ 1
[    0.218464] rtc_cmos 00:02: RTC can wake from S4
[    0.218656] rtc_cmos 00:02: registered as rtc0
[    0.218664] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.218668] initcall cmos_init+0x0/0x6a returned 0 after 239 usecs
[    0.218669] calling  ptp_kvm_init+0x0/0xf1 @ 1
[    0.218671] initcall ptp_kvm_init+0x0/0xf1 returned -19 after 0 usecs
[    0.218672] calling  intel_pstate_init+0x0/0x351 @ 1
[    0.218674] initcall intel_pstate_init+0x0/0x351 returned -19 after 0 usecs
[    0.218675] calling  ledtrig_disk_init+0x0/0x54 @ 1
[    0.218685] initcall ledtrig_disk_init+0x0/0x54 returned 0 after 8 usecs
[    0.218686] calling  ledtrig_mtd_init+0x0/0x2e @ 1
[    0.218687] initcall ledtrig_mtd_init+0x0/0x2e returned 0 after 0 usecs
[    0.218688] calling  ledtrig_cpu_init+0x0/0xd3 @ 1
[    0.218743] ledtrig-cpu: registered to indicate activity on CPUs
[    0.218744] initcall ledtrig_cpu_init+0x0/0xd3 returned 0 after 53 usecs
[    0.218745] calling  ledtrig_panic_init+0x0/0x39 @ 1
[    0.218747] initcall ledtrig_panic_init+0x0/0x39 returned 0 after 0 usecs
[    0.218748] calling  dmi_sysfs_init+0x0/0xdc @ 1
[    0.218983] initcall dmi_sysfs_init+0x0/0xdc returned 0 after 227 usecs
[    0.218983] calling  efi_load_efivars+0x0/0x71 @ 1
[    0.219000] initcall efi_load_efivars+0x0/0x71 returned 0 after 15 usecs
[    0.219001] calling  esrt_sysfs_init+0x0/0x2fa @ 1
[    0.219007] initcall esrt_sysfs_init+0x0/0x2fa returned 0 after 4 usecs
[    0.219008] calling  pmc_atom_init+0x0/0x283 @ 1
[    0.219012] initcall pmc_atom_init+0x0/0x283 returned -19 after 3 usecs
[    0.219013] calling  powercap_init+0x0/0x2a1 @ 1
[    0.219044] initcall powercap_init+0x0/0x2a1 returned 0 after 30 usecs
[    0.219046] calling  pm_check_save_msr+0x0/0x20 @ 1
[    0.219047] initcall pm_check_save_msr+0x0/0x20 returned 0 after 0 usecs
[    0.219048] calling  sock_diag_init+0x0/0x34 @ 1
[    0.219059] initcall sock_diag_init+0x0/0x34 returned 0 after 9 usecs
[    0.219061] calling  blackhole_init+0x0/0x11 @ 1
[    0.219063] initcall blackhole_init+0x0/0x11 returned 0 after 0 usecs
[    0.219064] calling  gre_offload_init+0x0/0x49 @ 1
[    0.219065] initcall gre_offload_init+0x0/0x49 returned 0 after 0 usecs
[    0.219066] calling  sysctl_ipv4_init+0x0/0x4c @ 1
[    0.219097] initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 28 usecs
[    0.219098] calling  cubictcp_register+0x0/0x58 @ 1
[    0.219099] initcall cubictcp_register+0x0/0x58 returned 0 after 0 usecs
[    0.219100] calling  inet6_init+0x0/0x34b @ 1
[    0.219371] NET: Registered protocol family 10
[    0.222868] Segment Routing with IPv6
[    0.222880] initcall inet6_init+0x0/0x34b returned 0 after 3689 usecs
[    0.222881] calling  mip6_init+0x0/0xb9 @ 1
[    0.222882] mip6: Mobile IPv6
[    0.222883] initcall mip6_init+0x0/0xb9 returned 0 after 0 usecs
[    0.222884] calling  packet_init+0x0/0x42 @ 1
[    0.222885] NET: Registered protocol family 17
[    0.222887] initcall packet_init+0x0/0x42 returned 0 after 1 usecs
[    0.222888] calling  dcbnl_init+0x0/0x4d @ 1
[    0.222890] initcall dcbnl_init+0x0/0x4d returned 0 after 0 usecs
[    0.222891] calling  mpls_gso_init+0x0/0x2c @ 1
[    0.222892] mpls_gso: MPLS GSO support
[    0.222893] initcall mpls_gso_init+0x0/0x2c returned 0 after 0 usecs
[    0.222895] calling  mcheck_init_device+0x0/0x12f @ 1
[    0.223112] initcall mcheck_init_device+0x0/0x12f returned 0 after 210 usecs
[    0.223130] calling  mcheck_late_init+0x0/0x70 @ 1
[    0.223135] initcall mcheck_late_init+0x0/0x70 returned 0 after 3 usecs
[    0.223136] calling  severities_debugfs_init+0x0/0x3b @ 1
[    0.223138] initcall severities_debugfs_init+0x0/0x3b returned 0 after 0 usecs
[    0.223139] calling  threshold_init_device+0x0/0x4b @ 1
[    0.223408] initcall threshold_init_device+0x0/0x4b returned 0 after 261 usecs
[    0.223409] calling  microcode_init+0x0/0x1fb @ 1
[    0.223425] microcode: CPU0: patch_level=0x0810100b
[    0.223427] microcode: CPU1: patch_level=0x0810100b
[    0.223438] microcode: CPU2: patch_level=0x0810100b
[    0.223444] microcode: CPU3: patch_level=0x0810100b
[    0.223493] microcode: Microcode Update Driver: v2.2.
[    0.223495] initcall microcode_init+0x0/0x1fb returned 0 after 82 usecs
[    0.223496] calling  hpet_insert_resource+0x0/0x23 @ 1
[    0.223498] initcall hpet_insert_resource+0x0/0x23 returned 0 after 1 usecs
[    0.223499] calling  update_mp_table+0x0/0x507 @ 1
[    0.223500] initcall update_mp_table+0x0/0x507 returned 0 after 0 usecs
[    0.223501] calling  lapic_insert_resource+0x0/0x3f @ 1
[    0.223502] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs
[    0.223503] calling  print_ICs+0x0/0x18b @ 1
[    0.223504] initcall print_ICs+0x0/0x18b returned 0 after 0 usecs
[    0.223506] calling  pat_memtype_list_init+0x0/0x32 @ 1
[    0.223508] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 1 usecs
[    0.223509] calling  create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
[    0.223511] initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 0 usecs
[    0.223512] calling  create_init_pkru_value+0x0/0x29 @ 1
[    0.223514] initcall create_init_pkru_value+0x0/0x29 returned 0 after 0 usecs
[    0.223517] calling  init_oops_id+0x0/0x40 @ 1
[    0.223532] initcall init_oops_id+0x0/0x40 returned 0 after 13 usecs
[    0.223533] calling  sched_clock_init_late+0x0/0x7b @ 1
[    0.223534] sched_clock: Marking stable (223490985, 0)->(319742372, -96251387)
[    0.223609] initcall sched_clock_init_late+0x0/0x7b returned 0 after 73 usecs
[    0.223610] calling  sched_init_debug+0x0/0x3e @ 1
[    0.223613] initcall sched_init_debug+0x0/0x3e returned 0 after 1 usecs
[    0.223614] calling  pm_qos_power_init+0x0/0xaf @ 1
[    0.223672] initcall pm_qos_power_init+0x0/0xaf returned 0 after 56 usecs
[    0.223673] calling  pm_debugfs_init+0x0/0x24 @ 1
[    0.223675] initcall pm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[    0.223675] calling  printk_late_init+0x0/0x122 @ 1
[    0.223677] initcall printk_late_init+0x0/0x122 returned 0 after 0 usecs
[    0.223678] calling  tk_debug_sleep_time_init+0x0/0x3c @ 1
[    0.223680] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 0 usecs
[    0.223681] calling  debugfs_kprobe_init+0x0/0xd2 @ 1
[    0.223685] initcall debugfs_kprobe_init+0x0/0xd2 returned 0 after 2 usecs
[    0.223686] calling  taskstats_init+0x0/0x37 @ 1
[    0.223689] registered taskstats version 1
[    0.223690] initcall taskstats_init+0x0/0x37 returned 0 after 2 usecs
[    0.223692] calling  load_system_certificate_list+0x0/0xea @ 1
[    0.223692] Loading compiled-in X.509 certificates
[    0.223693] initcall load_system_certificate_list+0x0/0xea returned 0 after 0 usecs
[    0.223694] calling  fault_around_debugfs+0x0/0x35 @ 1
[    0.223696] initcall fault_around_debugfs+0x0/0x35 returned 0 after 0 usecs
[    0.223698] calling  max_swapfiles_check+0x0/0x8 @ 1
[    0.223699] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[    0.223700] calling  init_zswap+0x0/0x43a @ 1
[    0.223708] zswap: loaded using pool lzo/zbud
[    0.223763] initcall init_zswap+0x0/0x43a returned 0 after 59 usecs
[    0.223764] calling  split_huge_pages_debugfs+0x0/0x35 @ 1
[    0.223765] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 0 usecs
[    0.223766] calling  check_early_ioremap_leak+0x0/0x39 @ 1
[    0.223767] initcall check_early_ioremap_leak+0x0/0x39 returned 0 after 0 usecs
[    0.223769] calling  init_root_keyring+0x0/0xa @ 1
[    0.223868] initcall init_root_keyring+0x0/0xa returned 0 after 95 usecs
[    0.223869] calling  init_profile_hash+0x0/0x7f @ 1
[    0.223870] initcall init_profile_hash+0x0/0x7f returned 0 after 0 usecs
[    0.223871] calling  integrity_fs_init+0x0/0x3f @ 1
[    0.223874] initcall integrity_fs_init+0x0/0x3f returned 0 after 1 usecs
[    0.223875] calling  prandom_reseed+0x0/0x2a @ 1
[    0.224092] initcall prandom_reseed+0x0/0x2a returned 0 after 210 usecs
[    0.224092] calling  init_error_injection+0x0/0x6a @ 1
[    0.224322] initcall init_error_injection+0x0/0x6a returned 0 after 223 usecs
[    0.224323] calling  pci_resource_alignment_sysfs_init+0x0/0x21 @ 1
[    0.224325] initcall pci_resource_alignment_sysfs_init+0x0/0x21 returned 0 after 1 usecs
[    0.224326] calling  pci_sysfs_init+0x0/0x50 @ 1
[    0.224433] initcall pci_sysfs_init+0x0/0x50 returned 0 after 103 usecs
[    0.224434] calling  bert_init+0x0/0x22b @ 1
[    0.224436] initcall bert_init+0x0/0x22b returned 0 after 0 usecs
[    0.224437] calling  clk_debug_init+0x0/0x116 @ 1
[    0.224442] initcall clk_debug_init+0x0/0x116 returned 0 after 3 usecs
[    0.224443] calling  boot_wait_for_devices+0x0/0x29 @ 1
[    0.224444] initcall boot_wait_for_devices+0x0/0x29 returned -19 after 0 usecs
[    0.224446] calling  dmar_free_unused_resources+0x0/0xc5 @ 1
[    0.224447] initcall dmar_free_unused_resources+0x0/0xc5 returned 0 after 0 usecs
[    0.224448] calling  deferred_probe_initcall+0x0/0x30 @ 1
[    0.224452] initcall deferred_probe_initcall+0x0/0x30 returned 0 after 3 usecs
[    0.224454] calling  genpd_debug_init+0x0/0x184 @ 1
[    0.224456] initcall genpd_debug_init+0x0/0x184 returned 0 after 1 usecs
[    0.224457] calling  genpd_power_off_unused+0x0/0x7e @ 1
[    0.224458] initcall genpd_power_off_unused+0x0/0x7e returned 0 after 0 usecs
[    0.224459] calling  rtc_hctosys+0x0/0x102 @ 1
[    0.224502] rtc_cmos 00:02: setting system clock to 2018-07-17 14:50:58 UTC (1531839058)
[    0.224503] initcall rtc_hctosys+0x0/0x102 returned 0 after 41 usecs
[    0.224504] calling  firmware_memmap_init+0x0/0x33 @ 1
[    0.224562] initcall firmware_memmap_init+0x0/0x33 returned 0 after 54 usecs
[    0.224564] calling  register_update_efi_random_seed+0x0/0x20 @ 1
[    0.224565] initcall register_update_efi_random_seed+0x0/0x20 returned 0 after 0 usecs
[    0.224565] calling  efi_shutdown_init+0x0/0x3c @ 1
[    0.224567] initcall efi_shutdown_init+0x0/0x3c returned 0 after 0 usecs
[    0.224568] calling  pci_mmcfg_late_insert_resources+0x0/0x51 @ 1
[    0.224569] initcall pci_mmcfg_late_insert_resources+0x0/0x51 returned 0 after 0 usecs
[    0.224570] calling  tcp_congestion_default+0x0/0x18 @ 1
[    0.224572] initcall tcp_congestion_default+0x0/0x18 returned 0 after 0 usecs
[    0.224573] calling  software_resume+0x0/0x210 @ 1
[    0.224575] initcall software_resume+0x0/0x210 returned -2 after 0 usecs
[    0.224575] calling  tracing_set_default_clock+0x0/0x35 @ 1
[    0.224576] initcall tracing_set_default_clock+0x0/0x35 returned 0 after 0 usecs
[    0.224577] calling  clear_boot_tracer+0x0/0x26 @ 1
[    0.224578] initcall clear_boot_tracer+0x0/0x26 returned 0 after 0 usecs
[    0.224580] calling  clk_disable_unused+0x0/0x160 @ 1
[    0.224582] initcall clk_disable_unused+0x0/0x160 returned 0 after 0 usecs
[    0.224582] calling  regulator_init_complete+0x0/0x4d @ 1
[    0.224584] initcall regulator_init_complete+0x0/0x4d returned 0 after 1 usecs
[    0.445380] Freeing unused kernel memory: 1544K
[    0.458115] Write protecting the kernel read-only data: 16384k
[    0.460158] Freeing unused kernel memory: 2028K
[    0.461809] Freeing unused kernel memory: 864K
[    0.468536] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.512269] calling  pt_gpio_driver_init+0x0/0x1000 [gpio_amdpt] @ 116
[    0.512491] initcall pt_gpio_driver_init+0x0/0x1000 [gpio_amdpt] returned 0 after 212 usecs
[    0.520004] calling  usb_init+0x0/0x141 [usbcore] @ 113
[    0.520011] ACPI: bus type USB registered
[    0.520025] usbcore: registered new interface driver usbfs
[    0.520037] usbcore: registered new interface driver hub
[    0.520067] usbcore: registered new device driver usb
[    0.520074] initcall usb_init+0x0/0x141 [usbcore] returned 0 after 60 usecs
[    0.521177] calling  init_scsi+0x0/0x7a [scsi_mod] @ 123
[    0.521242] SCSI subsystem initialized
[    0.521248] initcall init_scsi+0x0/0x7a [scsi_mod] returned 0 after 63 usecs
[    0.522364] calling  xhci_hcd_init+0x0/0x1f [xhci_hcd] @ 113
[    0.522371] initcall xhci_hcd_init+0x0/0x1f [xhci_hcd] returned 0 after 1 usecs
[    0.523631] calling  cryptd_init+0x0/0x1000 [cryptd] @ 124
[    0.523636] cryptd: max_cpu_qlen set to 1000
[    0.523638] initcall cryptd_init+0x0/0x1000 [cryptd] returned 0 after 5 usecs
[    0.523672] calling  xhci_pci_init+0x0/0x1000 [xhci_pci] @ 113
[    0.523712] calling  ata_init+0x0/0x316 [libata] @ 123
[    0.523882] calling  aes_init+0x0/0x1000 [aes_x86_64] @ 124
[    0.523942] xhci_hcd 0000:15:00.0: xHCI Host Controller
[    0.523948] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
[    0.526295] libata version 3.00 loaded.
[    0.526305] initcall ata_init+0x0/0x316 [libata] returned 0 after 2356 usecs
[    0.527171] calling  ahci_pci_driver_init+0x0/0x1000 [ahci] @ 115
[    0.527194] ahci 0000:15:00.1: version 3.0
[    0.527321] ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled
[    0.527371] ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    0.527372] ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.528123] scsi host0: ahci
[    0.528485] scsi host1: ahci
[    0.528780] scsi host2: ahci
[    0.531059] scsi host3: ahci
[    0.532847] scsi host4: ahci
[    0.532983] scsi host5: ahci
[    0.533103] scsi host6: ahci
[    0.533245] scsi host7: ahci
[    0.533308] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 36
[    0.533310] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 36
[    0.533311] ata3: DUMMY
[    0.533312] ata4: DUMMY
[    0.533314] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 36
[    0.533315] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 36
[    0.533316] ata7: DUMMY
[    0.533316] ata8: DUMMY
[    0.533538] ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.533540] ahci 0000:39:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio 
[    0.533716] scsi host8: ahci
[    0.533785] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 38
[    0.533804] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 6472 usecs
[    0.558256] initcall aes_init+0x0/0x1000 [aes_x86_64] returned 0 after 30352 usecs
[    0.558866] calling  aesni_init+0x0/0x1e7 [aesni_intel] @ 119
[    0.558867] AVX2 version of gcm_enc/dec engaged.
[    0.558867] AES CTR mode by8 optimization enabled
[    0.563581] initcall aesni_init+0x0/0x1e7 [aesni_intel] returned 0 after 4594 usecs
[    0.563843] calling  crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] @ 127
[    0.563886] initcall crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] returned 0 after 38 usecs
[    0.579333] xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000410
[    0.579583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.579584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.579585] usb usb1: Product: xHCI Host Controller
[    0.579586] usb usb1: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[    0.579586] usb usb1: SerialNumber: 0000:15:00.0
[    0.579699] hub 1-0:1.0: USB hub found
[    0.579715] hub 1-0:1.0: 10 ports detected
[    0.580169] xhci_hcd 0000:15:00.0: xHCI Host Controller
[    0.580171] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2
[    0.580173] xhci_hcd 0000:15:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[    0.580198] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.580209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.580210] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.580211] usb usb2: Product: xHCI Host Controller
[    0.580212] usb usb2: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[    0.580213] usb usb2: SerialNumber: 0000:15:00.0
[    0.580286] hub 2-0:1.0: USB hub found
[    0.580297] hub 2-0:1.0: 4 ports detected
[    0.580519] xhci_hcd 0000:38:00.3: xHCI Host Controller
[    0.580521] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3
[    0.580704] xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000040000410
[    0.581066] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.581067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.581068] usb usb3: Product: xHCI Host Controller
[    0.581069] usb usb3: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[    0.581070] usb usb3: SerialNumber: 0000:38:00.3
[    0.581165] hub 3-0:1.0: USB hub found
[    0.581179] hub 3-0:1.0: 4 ports detected
[    0.581540] xhci_hcd 0000:38:00.3: xHCI Host Controller
[    0.581542] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4
[    0.581543] xhci_hcd 0000:38:00.3: Host supports USB 3.10 Enhanced SuperSpeed
[    0.581567] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.581578] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.581579] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.581580] usb usb4: Product: xHCI Host Controller
[    0.581581] usb usb4: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[    0.581582] usb usb4: SerialNumber: 0000:38:00.3
[    0.581661] hub 4-0:1.0: USB hub found
[    0.581669] hub 4-0:1.0: 4 ports detected
[    0.582030] xhci_hcd 0000:38:00.4: xHCI Host Controller
[    0.582032] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5
[    0.582190] xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000040000410
[    0.582504] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.582505] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.582505] usb usb5: Product: xHCI Host Controller
[    0.582506] usb usb5: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[    0.582507] usb usb5: SerialNumber: 0000:38:00.4
[    0.582588] hub 5-0:1.0: USB hub found
[    0.582592] hub 5-0:1.0: 1 port detected
[    0.582688] xhci_hcd 0000:38:00.4: xHCI Host Controller
[    0.582690] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6
[    0.582692] xhci_hcd 0000:38:00.4: Host supports USB 3.10 Enhanced SuperSpeed
[    0.582716] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.582727] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.582728] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.582729] usb usb6: Product: xHCI Host Controller
[    0.582730] usb usb6: Manufacturer: Linux 4.18.0-rc5+ xhci-hcd
[    0.582731] usb usb6: SerialNumber: 0000:38:00.4
[    0.582797] hub 6-0:1.0: USB hub found
[    0.582801] hub 6-0:1.0: 1 port detected
[    0.582905] initcall xhci_pci_init+0x0/0x1000 [xhci_pci] returned 0 after 18611 usecs
[    0.850253] ata1: SATA link down (SStatus 0 SControl 300)
[    0.914084] usb 1-10: new low-speed USB device number 2 using xhci_hcd
[    0.918081] usb 5-1: new low-speed USB device number 2 using xhci_hcd
[    1.016786] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.017684] ata9.00: supports DRM functions and may not be fully accessible
[    1.017766] ata9.00: ATA-10: CT1000MX500SSD4, M3CR020, max UDMA/133
[    1.017769] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.018739] ata9.00: supports DRM functions and may not be fully accessible
[    1.019487] ata9.00: configured for UDMA/133
[    1.080915] usb 5-1: New USB device found, idVendor=413c, idProduct=3012, bcdDevice=43.01
[    1.080918] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.080920] usb 5-1: Product: Dell USB Optical Mouse
[    1.080922] usb 5-1: Manufacturer: Dell
[    1.098214] calling  hid_init+0x0/0x5d [hid] @ 127
[    1.098225] hidraw: raw HID events driver (C) Jiri Kosina
[    1.098232] initcall hid_init+0x0/0x5d [hid] returned 0 after 13 usecs
[    1.098894] calling  hid_init+0x0/0x1000 [usbhid] @ 127
[    1.103376] usbcore: registered new interface driver usbhid
[    1.103377] usbhid: USB HID core driver
[    1.103385] initcall hid_init+0x0/0x1000 [usbhid] returned 0 after 4378 usecs
[    1.104253] calling  hid_generic_init+0x0/0x1000 [hid_generic] @ 127
[    1.104383] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:08.1/0000:38:00.4/usb5/5-1/5-1:1.0/0003:413C:3012.0001/input/input0
[    1.104477] hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:38:00.4-1/input0
[    1.104493] initcall hid_generic_init+0x0/0x1000 [hid_generic] returned 0 after 232 usecs
[    1.105221] calling  evdev_init+0x0/0x1000 [evdev] @ 127
[    1.105253] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 28 usecs
[    1.162858] ata2: SATA link down (SStatus 0 SControl 300)
[    1.201712] usb 1-10: New USB device found, idVendor=413c, idProduct=2105, bcdDevice= 3.52
[    1.201716] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.201719] usb 1-10: Product: Dell USB Keyboard
[    1.201721] usb 1-10: Manufacturer: Dell
[    1.212049] tsc: Refined TSC clocksource calibration: 3503.008 MHz
[    1.212057] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x327e6a7724f, max_idle_ns: 440795228212 ns
[    1.212270] clocksource: Switched to clocksource tsc
[    1.266120] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:413C:2105.0002/input/input1
[    1.324665] hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:15:00.0-10/input0
[    1.478997] ata5: SATA link down (SStatus 0 SControl 300)
[    1.796135] ata6: SATA link down (SStatus 0 SControl 300)
[    1.796567] scsi 8:0:0:0: Direct-Access     ATA      CT1000MX500SSD4  020  PQ: 0 ANSI: 5
[    1.798577] calling  init_sd+0x0/0x1000 [sd_mod] @ 127
[    1.798678] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 94 usecs
[    1.798684] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.798686] sd 8:0:0:0: [sda] 4096-byte physical blocks
[    1.798690] sd 8:0:0:0: [sda] Write Protect is off
[    1.798691] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.798696] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.799763]  sda: sda1 sda2 sda3
[    1.800206] sd 8:0:0:0: [sda] supports TCG Opal
[    1.800207] sd 8:0:0:0: [sda] Attached SCSI disk
[    1.825201] calling  md_init+0x0/0x1000 [md_mod] @ 185
[    1.825383] initcall md_init+0x0/0x1000 [md_mod] returned 0 after 169 usecs
[    1.825574] calling  linear_init+0x0/0x1000 [linear] @ 185
[    1.825577] initcall linear_init+0x0/0x1000 [linear] returned 0 after 0 usecs
[    1.826816] calling  multipath_init+0x0/0x1000 [multipath] @ 190
[    1.826819] initcall multipath_init+0x0/0x1000 [multipath] returned 0 after 0 usecs
[    1.827956] calling  raid0_init+0x0/0x1000 [raid0] @ 193
[    1.827959] initcall raid0_init+0x0/0x1000 [raid0] returned 0 after 0 usecs
[    1.829407] calling  raid_init+0x0/0x1000 [raid1] @ 196
[    1.829411] initcall raid_init+0x0/0x1000 [raid1] returned 0 after 0 usecs
[    1.830579] calling  init_module+0x0/0x1000 [raid6_pq] @ 199
[    1.896240] raid6: sse2x1   gen()  8906 MB/s
[    1.964295] raid6: sse2x1   xor()  7808 MB/s
[    2.032243] raid6: sse2x2   gen() 15159 MB/s
[    2.100021] raid6: sse2x2   xor() 10583 MB/s
[    2.168239] raid6: sse2x4   gen() 17192 MB/s
[    2.236250] raid6: sse2x4   xor()  9812 MB/s
[    2.304240] raid6: avx2x1   gen() 18281 MB/s
[    2.372022] raid6: avx2x1   xor() 13971 MB/s
[    2.440021] raid6: avx2x2   gen() 23442 MB/s
[    2.508342] raid6: avx2x2   xor() 15063 MB/s
[    2.576247] raid6: avx2x4   gen() 24407 MB/s
[    2.644022] raid6: avx2x4   xor() 13683 MB/s
[    2.644022] raid6: using algorithm avx2x4 gen() 24407 MB/s
[    2.644023] raid6: .... xor() 13683 MB/s, rmw enabled
[    2.644023] raid6: using avx2x2 recovery algorithm
[    2.644025] initcall init_module+0x0/0x1000 [raid6_pq] returned 0 after 794379 usecs
[    2.644588] calling  async_tx_init+0x0/0x1000 [async_tx] @ 199
[    2.644595] async_tx: api initialized (async)
[    2.644599] initcall async_tx_init+0x0/0x1000 [async_tx] returned 0 after 6 usecs
[    2.644900] calling  calibrate_xor_blocks+0x0/0xf45 [xor] @ 199
[    2.644901] xor: automatically using best checksumming function   avx       
[    2.644905] initcall calibrate_xor_blocks+0x0/0xf45 [xor] returned 0 after 1 usecs
[    2.645388] calling  async_pq_init+0x0/0x1000 [async_pq] @ 199
[    2.645393] initcall async_pq_init+0x0/0x1000 [async_pq] returned 0 after 0 usecs
[    2.646054] calling  crc32c_mod_init+0x0/0x1000 [crc32c_generic] @ 199
[    2.646124] initcall crc32c_mod_init+0x0/0x1000 [crc32c_generic] returned 0 after 63 usecs
[    2.646311] calling  libcrc32c_mod_init+0x0/0x1000 [libcrc32c] @ 199
[    2.646316] initcall libcrc32c_mod_init+0x0/0x1000 [libcrc32c] returned 0 after 2 usecs
[    2.648092] calling  raid5_init+0x0/0x1000 [raid456] @ 199
[    2.648152] initcall raid5_init+0x0/0x1000 [raid456] returned 0 after 53 usecs
[    2.651525] calling  raid_init+0x0/0x1000 [raid10] @ 215
[    2.651529] initcall raid_init+0x0/0x1000 [raid10] returned 0 after 0 usecs
[    2.660106] calling  dm_init+0x0/0x4d [dm_mod] @ 224
[    2.660189] device-mapper: uevent: version 1.0.3
[    2.660281] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.660288] initcall dm_init+0x0/0x4d [dm_mod] returned 0 after 171 usecs
[    2.660801] calling  dm_crypt_init+0x0/0x1000 [dm_crypt] @ 224
[    2.660803] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 0 usecs
[   20.789437] random: crng init done
[   23.548952] calling  fscrypt_init+0x0/0x1000 [fscrypto] @ 293
[   23.549089] initcall fscrypt_init+0x0/0x1000 [fscrypto] returned 0 after 129 usecs
[   23.550581] calling  journal_init+0x0/0x556 [jbd2] @ 293
[   23.550729] initcall journal_init+0x0/0x556 [jbd2] returned 0 after 139 usecs
[   23.550933] calling  mbcache_init+0x0/0x1000 [mbcache] @ 293
[   23.550999] initcall mbcache_init+0x0/0x1000 [mbcache] returned 0 after 62 usecs
[   23.558019] calling  ext4_init_fs+0x0/0x190 [ext4] @ 293
[   23.558275] initcall ext4_init_fs+0x0/0x190 [ext4] returned 0 after 238 usecs
[   23.602901] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   23.712818] calling  init_autofs_fs+0x0/0x26 [autofs4] @ 1
[   23.712871] initcall init_autofs_fs+0x0/0x26 [autofs4] returned 0 after 47 usecs
[   23.717181] calling  xt_init+0x0/0x1000 [x_tables] @ 1
[   23.717186] initcall xt_init+0x0/0x1000 [x_tables] returned 0 after 1 usecs
[   23.718548] calling  ip_tables_init+0x0/0x1000 [ip_tables] @ 1
[   23.718555] initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 3 usecs
[   23.727905] calling  efivarfs_init+0x0/0x1000 [efivarfs] @ 330
[   23.727908] initcall efivarfs_init+0x0/0x1000 [efivarfs] returned 0 after 0 usecs
[   23.760391] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   23.780129] systemd[1]: Detected architecture x86-64.
[   23.784857] systemd[1]: Set hostname to <tokeiihto>.
[   23.864300] systemd[1]: Listening on udev Kernel Socket.
[   23.864390] systemd[1]: Listening on udev Control Socket.
[   23.865191] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   23.865232] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   23.865251] systemd[1]: Reached target User and Group Name Lookups.
[   23.865409] systemd[1]: Created slice User and Session Slice.
[   23.865499] systemd[1]: Listening on Journal Socket (/dev/log).
[   23.884770] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   23.987637] calling  acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 377
[   23.987685] acpi_cpufreq: overriding BIOS provided _PSD data
[   23.987784] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned 0 after 139 usecs
[   23.988924] calling  pcc_cpufreq_init+0x0/0xe89 [pcc_cpufreq] @ 364
[   23.988943] initcall pcc_cpufreq_init+0x0/0xe89 [pcc_cpufreq] returned -19 after 15 usecs
[   23.991239] calling  acpi_button_driver_init+0x0/0x1000 [button] @ 372
[   23.991331] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   23.991373] ACPI: Power Button [PWRB]
[   23.991428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   23.991470] ACPI: Power Button [PWRF]
[   23.991504] initcall acpi_button_driver_init+0x0/0x1000 [button] returned 0 after 253 usecs
[   23.999945] calling  fjes_init_module+0x0/0xd1 [fjes] @ 366
[   24.000058] initcall fjes_init_module+0x0/0xd1 [fjes] returned -19 after 105 usecs
[   24.001615] calling  acpi_video_init+0x0/0x1000 [video] @ 379
[   24.001690] initcall acpi_video_init+0x0/0x1000 [video] returned 0 after 70 usecs
[   24.002284] systemd-journald[350]: Received request to flush runtime journal from PID 1
[   24.007644] systemd-journald[350]: File /var/log/journal/b2c50e138489450cac9b1fc61f4d89bc/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   24.055286] calling  parport_default_proc_register+0x0/0x1000 [parport] @ 368
[   24.055299] calling  acpi_wmi_init+0x0/0x1000 [wmi] @ 364
[   24.055302] initcall parport_default_proc_register+0x0/0x1000 [parport] returned 0 after 10 usecs
[   24.055701] calling  piix4_driver_init+0x0/0x1000 [i2c_piix4] @ 367
[   24.055770] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   24.055771] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[   24.056033] calling  init_soundcore+0x0/0x1000 [soundcore] @ 371
[   24.056039] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 3 usecs
[   24.056119] initcall piix4_driver_init+0x0/0x1000 [i2c_piix4] returned 0 after 81 usecs
[   24.056391] initcall acpi_wmi_init+0x0/0x1000 [wmi] returned 0 after 345 usecs
[   24.056945] calling  parport_pc_init+0x0/0xf25 [parport_pc] @ 368
[   24.057004] parport_pc 00:04: reported by Plug and Play ACPI
[   24.057113] parport0: PC-style at 0x378, irq 5 [PCSPP]
[   24.058985] calling  alsa_sound_init+0x0/0x82 [snd] @ 371
[   24.059005] initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 14 usecs
[   24.059186] calling  sp5100_tco_init+0x0/0x1000 [sp5100_tco] @ 367
[   24.059189] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   24.059266] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[   24.059276] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[   24.059302] initcall sp5100_tco_init+0x0/0x1000 [sp5100_tco] returned 0 after 111 usecs
[   24.060430] calling  alsa_timer_init+0x0/0x1000 [snd_timer] @ 371
[   24.060459] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 25 usecs
[   24.075236] calling  fjes_init_module+0x0/0xd1 [fjes] @ 372
[   24.075240] calling  rtl8169_pci_driver_init+0x0/0x1000 [r8169] @ 366
[   24.075260] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   24.075413] calling  drm_core_init+0x0/0xcd [drm] @ 369
[   24.075546] calling  alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 371
[   24.075575] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 16 usecs
[   24.075674] initcall drm_core_init+0x0/0xcd [drm] returned 0 after 108 usecs
[   24.076746] calling  alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 377
[   24.076752] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 3 usecs
[   24.077040] initcall fjes_init_module+0x0/0xd1 [fjes] returned -19 after 281 usecs
[   24.081560] calling  k10temp_driver_init+0x0/0x1000 [k10temp] @ 374
[   24.081570] calling  hda_bus_init+0x0/0x11 [snd_hda_core] @ 377
[   24.081588] initcall hda_bus_init+0x0/0x11 [snd_hda_core] returned 0 after 12 usecs
[   24.081632] initcall k10temp_driver_init+0x0/0x1000 [k10temp] returned 0 after 57 usecs
[   24.081770] calling  drm_kms_helper_init+0x0/0x14 [drm_kms_helper] @ 369
[   24.081789] initcall drm_kms_helper_init+0x0/0x14 [drm_kms_helper] returned 0 after 12 usecs
[   24.084241] calling  pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] @ 375
[   24.084289] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   24.084337] initcall pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] returned 0 after 90 usecs
[   24.087063] calling  pcsp_init+0x0/0x1000 [snd_pcsp] @ 375
[   24.087067] Error: Driver 'pcspkr' is already registered, aborting...
[   24.087092] initcall pcsp_init+0x0/0x1000 [snd_pcsp] returned -16 after 25 usecs
[   24.087972] calling  azx_driver_init+0x0/0xfd8 [snd_hda_intel] @ 377
[   24.088127] snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client
[   24.088420] initcall azx_driver_init+0x0/0xfd8 [snd_hda_intel] returned 0 after 432 usecs
[   24.089391] calling  init_sg+0x0/0x1000 [sg] @ 373
[   24.089464] sd 8:0:0:0: Attached scsi generic sg0 type 0
[   24.089467] initcall init_sg+0x0/0x1000 [sg] returned 0 after 72 usecs
[   24.092721] calling  init_module+0x0/0x2f [efivars] @ 378
[   24.092722] EFI Variables Facility v0.08 2004-May-17
[   24.095193] r8169 0000:18:00.0 eth0: RTL8168h/8111h, 30:9c:23:04:d6:98, XID 54100800, IRQ 55
[   24.095195] r8169 0000:18:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   24.096629] initcall rtl8169_pci_driver_init+0x0/0x1000 [r8169] returned 0 after 3810 usecs
[   24.098160] calling  hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 386
[   24.107427] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 9042 usecs
[   24.109682] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input5
[   24.109921] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input6
[   24.109966] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input7
[   24.110155] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input8
[   24.110201] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input9
[   24.110391] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input10
[   24.112394] initcall init_module+0x0/0x2f [efivars] returned 0 after 13894 usecs
[   24.156519] initcall parport_pc_init+0x0/0xf25 [parport_pc] returned 0 after 56984 usecs
[   24.165454] calling  efivars_pstore_init+0x0/0x1000 [efi_pstore] @ 378
[   24.167320] calling  ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] @ 374
[   24.167433] pstore: Registered efi as persistent store backend
[   24.167437] initcall efivars_pstore_init+0x0/0x1000 [efi_pstore] returned 0 after 109 usecs
[   24.167470] calling  fjes_init_module+0x0/0xd1 [fjes] @ 370
[   24.167579] initcall fjes_init_module+0x0/0xd1 [fjes] returned -19 after 102 usecs
[   24.169886] EXT4-fs (sda2): recovery complete
[   24.169888] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   24.170238] calling  ttm_init+0x0/0x1000 [ttm] @ 369
[   24.171195] initcall ttm_init+0x0/0x1000 [ttm] returned 0 after 926 usecs
[   24.172318] initcall ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] returned 0 after 2025 usecs
[   24.173451] calling  drm_sched_fence_slab_init+0x0/0xec9 [gpu_sched] @ 369
[   24.173457] initcall drm_sched_fence_slab_init+0x0/0xec9 [gpu_sched] returned 0 after 3 usecs
[   24.173903] calling  crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] @ 364
[   24.176529] initcall crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] returned 0 after 2559 usecs
[   24.180255] calling  crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] @ 376
[   24.184255] initcall crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] returned 0 after 3897 usecs
[   24.217425] r8169 0000:18:00.0 enp24s0: renamed from eth0
[   24.227433] calling  ppdev_init+0x0/0x1000 [ppdev] @ 372
[   24.227528] ppdev: user-space parallel port driver
[   24.227533] initcall ppdev_init+0x0/0x1000 [ppdev] returned 0 after 93 usecs
[   24.227822] calling  wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] @ 368
[   24.227886] initcall wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] returned 0 after 58 usecs
[   24.228988] calling  init_fat_fs+0x0/0xfcb [fat] @ 405
[   24.229079] initcall init_fat_fs+0x0/0xfcb [fat] returned 0 after 85 usecs
[   24.232267] calling  init_vfat_fs+0x0/0x1000 [vfat] @ 405
[   24.232273] initcall init_vfat_fs+0x0/0x1000 [vfat] returned 0 after 3 usecs
[   24.251445] calling  hwrng_modinit+0x0/0x1000 [rng_core] @ 364
[   24.251487] initcall hwrng_modinit+0x0/0x1000 [rng_core] returned 0 after 38 usecs
[   24.254758] calling  sp_mod_init+0x0/0x1000 [ccp] @ 366
[   24.254781] initcall sp_mod_init+0x0/0x1000 [ccp] returned 0 after 18 usecs
[   24.255142] calling  init_nls_cp437+0x0/0x1000 [nls_cp437] @ 406
[   24.255145] initcall init_nls_cp437+0x0/0x1000 [nls_cp437] returned 0 after 0 usecs
[   24.255831] calling  amdgpu_init+0x0/0x86 [amdgpu] @ 369
[   24.255843] [drm] amdgpu kernel modesetting enabled.
[   24.257503] calling  svm_init+0x0/0xb8e [kvm_amd] @ 364
[   24.257505] kvm: disabled by bios
[   24.257529] initcall svm_init+0x0/0xb8e [kvm_amd] returned -95 after 21 usecs
[   24.258660] calling  init_nls_ascii+0x0/0x1000 [nls_ascii] @ 410
[   24.258663] initcall init_nls_ascii+0x0/0x1000 [nls_ascii] returned 0 after 0 usecs
[   24.259706] calling  mce_amd_init+0x0/0x1000 [edac_mce_amd] @ 374
[   24.259707] MCE: In-kernel MCE decoding enabled.
[   24.259709] initcall mce_amd_init+0x0/0x1000 [edac_mce_amd] returned 0 after 0 usecs
[   24.260789] calling  amd64_edac_init+0x0/0x2000 [amd64_edac_mod] @ 374
[   24.260799] EDAC amd64: Node 0: DRAM ECC disabled.
[   24.260800] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   24.260804] initcall amd64_edac_init+0x0/0x2000 [amd64_edac_mod] returned -19 after 11 usecs
[   24.263395] calling  kfd_module_init+0x0/0x1000 [amdkfd] @ 411
[   24.263441] Parsing CRAT table with 1 nodes
[   24.263451] Creating topology SYSFS entries
[   24.263480] Topology: Add APU node [0x0:0x0]
[   24.263480] Finished initializing topology
[   24.263503] kfd kfd: Initialized module
[   24.263510] initcall kfd_module_init+0x0/0x1000 [amdkfd] returned 0 after 104 usecs
[   24.263660] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   24.263661] fb: switching to amdgpudrmfb from EFI VGA
[   24.263676] Console: switching to colour dummy device 80x25
[   24.263908] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0xC8).
[   24.263919] [drm] register mmio base: 0xFE600000
[   24.263919] [drm] register mmio size: 524288
[   24.263925] [drm] probing gen 2 caps for device 1022:15db = 700d03/e
[   24.263926] [drm] probing mlw for device 1022:15db = 700d03
[   24.263929] [drm] add ip block number 0 <soc15_common>
[   24.263929] [drm] add ip block number 1 <gmc_v9_0>
[   24.263930] [drm] add ip block number 2 <vega10_ih>
[   24.263930] [drm] add ip block number 3 <psp>
[   24.263931] [drm] add ip block number 4 <powerplay>
[   24.263932] [drm] add ip block number 5 <dm>
[   24.263932] [drm] add ip block number 6 <gfx_v9_0>
[   24.263933] [drm] add ip block number 7 <sdma_v4_0>
[   24.263933] [drm] add ip block number 8 <vcn_v1_0>
[   24.266813] kfd kfd: DID 15dd is missing in supported_devices
[   24.266815] kfd kfd: kgd2kfd_probe failed
[   24.266826] [drm] VCN decode is enabled in VM mode
[   24.266826] [drm] VCN encode is enabled in VM mode
[   24.289341] [drm] BIOS signature incorrect 0 0
[   24.289373] ATOM BIOS: 113-RAVEN-106
[   24.289410] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[   24.289432] amdgpu 0000:38:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
[   24.289434] amdgpu 0000:38:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
[   24.289438] [drm] Detected VRAM RAM=1024M, BAR=1024M
[   24.289439] [drm] RAM width 128bits DDR4
[   24.289542] [TTM] Zone  kernel: Available graphics memory: 7701238 kiB
[   24.289543] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   24.289543] [TTM] Initializing pool allocator
[   24.289558] [TTM] Initializing DMA pool allocator
[   24.289612] [drm] amdgpu: 1024M of VRAM memory ready
[   24.289613] [drm] amdgpu: 3072M of GTT memory ready.
[   24.289635] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   24.289817] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[   24.323790] [drm] use_doorbell being set to: [true]
[   24.328718] calling  amd64_edac_init+0x0/0x2000 [amd64_edac_mod] @ 364
[   24.328728] EDAC amd64: Node 0: DRAM ECC disabled.
[   24.328729] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   24.328732] initcall amd64_edac_init+0x0/0x2000 [amd64_edac_mod] returned -19 after 11 usecs
[   24.331368] [drm] Found VCN firmware Version: 1.73 Family ID: 18
[   24.480285] amdgpu: [powerplay] dpm has been enabled
[   24.490994] [drm] Display Core initialized with v3.1.44!
[   24.519242] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   24.519243] [drm] Driver supports precise vblank timestamp query.
[   24.541977] [drm] VCN decode and encode initialized successfully.
[   24.547379] [drm] fb mappable at 0xA1100000
[   24.547380] [drm] vram apper at 0xA0000000
[   24.547381] [drm] size 33177600
[   24.547382] [drm] fb depth is 24
[   24.547382] [drm]    pitch is 15360
[   24.547462] fbcon: amdgpudrmfb (fb0) is primary device
[   24.578543] Console: switching to colour frame buffer device 480x135
[   24.625399] amdgpu 0000:38:00.0: fb0: amdgpudrmfb frame buffer device
[   24.644117] amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
[   24.644120] amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
[   24.644122] amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
[   24.644123] amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
[   24.644125] amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
[   24.644126] amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
[   24.644127] amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
[   24.644129] amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
[   24.644130] amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
[   24.644132] amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
[   24.644134] amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
[   24.644135] amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
[   24.644137] amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
[   24.644138] amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
[   24.644462] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
[   24.644656] r8169 0000:18:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
[   24.644660] r8169 0000:18:00.0 enp24s0: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-2)
[   24.647332] [drm] Initialized amdgpu 3.26.0 20150101 for 0000:38:00.0 on minor 0
[   24.647464] initcall amdgpu_init+0x0/0x86 [amdgpu] returned 0 after 311212 usecs
[   24.686588] r8169 0000:18:00.0 enp24s0: link down
[   24.686622] r8169 0000:18:00.0 enp24s0: link down
[   24.686733] IPv6: ADDRCONF(NETDEV_UP): enp24s0: link is not ready
[   25.109476] calling  generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 543
[   25.109496] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 12 usecs
[   25.111935] calling  realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 542
[   25.113064] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   25.113067] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   25.113069] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   25.113070] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   25.113071] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[   25.113073] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   25.113075] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[   25.113076] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[   25.113078] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[   25.132732] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 20298 usecs
[   25.133145] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input11
[   25.133197] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input12
[   25.133231] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input13
[   25.133278] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input14
[   25.133320] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input15
[   25.133358] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input16
[   25.133397] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input17
[   28.457629] r8169 0000:18:00.0 enp24s0: link up
[   28.457637] IPv6: ADDRCONF(NETDEV_CHANGE): enp24s0: link becomes ready
[   42.169412] calling  fuse_init+0x0/0x1a6 [fuse] @ 938
[   42.169414] fuse init (API version 7.27)
[   42.169613] initcall fuse_init+0x0/0x1a6 [fuse] returned 0 after 187 usecs

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

             reply	other threads:[~2018-07-17 16:02 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-17 16:02 Paul Menzel [this message]
2018-07-20 12:31 ` MSI B350M MORTAR: `AMD-Vi: Unable to write to IOMMU perf counter.` and `pci 0000:00:00.2: can't derive routing for PCI INT A` Jörg Rödel
     [not found]   ` <20180720123153.GC18541-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2018-07-23 10:09     ` Paul Menzel
     [not found]       ` <d2c5ee4a-e72b-672e-ae30-7b3cd5a43c63-KUpvgZVWgV9o1qOY/usvUg@public.gmane.org>
2018-07-27  8:27         ` Jörg Rödel
2018-07-27  9:18           ` Paul Menzel
2018-07-27 10:27             ` Jörg Rödel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=605ca165-0071-eb7f-4c0d-b1e76ddd0e05@molgen.mpg.de \
    --to=pmenzel+linux-iommu@molgen.mpg.de \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).