IOMMU Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 1/1] iommu/vt-d: Add Kconfig option to enable/disable scalable mode
@ 2019-11-09  3:40 Lu Baolu
  2019-11-09  3:59 ` Qian Cai
  2019-11-11  2:58 ` Qian Cai
  0 siblings, 2 replies; 9+ messages in thread
From: Lu Baolu @ 2019-11-09  3:40 UTC (permalink / raw)
  To: Joerg Roedel, David Woodhouse
  Cc: kevin.tian, ashok.raj, linux-kernel, iommu, jacob.jun.pan

This adds Kconfig option INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
to make it easier for distributions to enable or disable the
Intel IOMMU scalable mode by default during kernel build.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/Kconfig       | 9 +++++++++
 drivers/iommu/intel-iommu.c | 7 ++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index e3842eabcfdd..fbdf3fd291d9 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -242,6 +242,15 @@ config INTEL_IOMMU_FLOPPY_WA
 	  workaround will setup a 1:1 mapping for the first
 	  16MiB to make floppy (an ISA device) work.
 
+config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
+	prompt "Enable Intel IOMMU scalable mode by default"
+	depends on INTEL_IOMMU
+	help
+	  Selecting this option will enable the scalable mode if
+	  hardware presents the capability. If this option is not
+	  selected, scalable mode support could also be enabled
+	  by passing intel_iommu=sm_on to the kernel.
+
 config IRQ_REMAP
 	bool "Support for Interrupt Remapping"
 	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 6db6d969e31c..6051fe790c61 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -355,9 +355,14 @@ static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,
 int dmar_disabled = 0;
 #else
 int dmar_disabled = 1;
-#endif /*CONFIG_INTEL_IOMMU_DEFAULT_ON*/
+#endif /* CONFIG_INTEL_IOMMU_DEFAULT_ON */
 
+#ifdef INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
+int intel_iommu_sm = 1;
+#else
 int intel_iommu_sm;
+#endif /* INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON */
+
 int intel_iommu_enabled = 0;
 EXPORT_SYMBOL_GPL(intel_iommu_enabled);
 
-- 
2.17.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-09  3:40 [PATCH v2 1/1] iommu/vt-d: Add Kconfig option to enable/disable scalable mode Lu Baolu
2019-11-09  3:59 ` Qian Cai
2019-11-11  1:27   ` Lu Baolu
2019-11-11  2:00     ` Qian Cai
2019-11-11  2:17       ` Lu Baolu
2019-11-11  2:58 ` Qian Cai
2019-11-11  5:20   ` Lu Baolu
2019-11-11 14:05     ` Qian Cai
2019-11-12  5:48       ` Lu Baolu

IOMMU Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iommu/0 linux-iommu/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iommu linux-iommu/ https://lore.kernel.org/linux-iommu \
		iommu@lists.linux-foundation.org
	public-inbox-index linux-iommu

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linux-foundation.lists.iommu


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git