IOMMU Archive on lore.kernel.org
 help / color / Atom feed
* arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
@ 2020-09-21 13:20 Naresh Kamboju
  2020-09-21 14:51 ` Robin Murphy
  2020-09-24  9:03 ` Joerg Roedel
  0 siblings, 2 replies; 9+ messages in thread
From: Naresh Kamboju @ 2020-09-21 13:20 UTC (permalink / raw)
  To: linux-mtd, open list, Linux-Next Mailing List, lkft-triage,
	open list:IOMMU DRIVERS
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Miquel Raynal, Suram Suram, masonccyang,
	Zhiqiang.Hou

arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
kernel panic happened.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

metadata:
  git branch: master
  git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
  git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
  git describe: next-20200921
  make_kernelversion: 5.9.0-rc5
  kernel-config:
https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config


crash log,

[    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    1.818202] nand: Micron MT29F16G08ABACAWP
[    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
4096, OOB size: 224
[    1.830078] ------------[ cut here ]------------
[    1.834703] Driver must set ecc.strength when using hardware ECC
[    1.840739] WARNING: CPU: 1 PID: 1 at
drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
[    1.850568] Modules linked in:
[    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200921 #1
[    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
[    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
[    1.882774] sp : ffff80001005ba50
[    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
[    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
[    1.896706] x25: 000000000000002c x24: ffff0082edf98578
[    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
[    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
[    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
[    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
[    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
[    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
[    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
[    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
[    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
[    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
[    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
[    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
[    1.965748] Call trace:
[    1.968189]  nand_scan_with_ids+0x110c/0x1498
[    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
[    1.976723]  platform_drv_probe+0x5c/0xb0
[    1.980729]  really_probe+0xf0/0x4d8
[    1.984300]  driver_probe_device+0xfc/0x168
[    1.988480]  device_driver_attach+0x7c/0x88
[    1.992659]  __driver_attach+0xac/0x178
[    1.996490]  bus_for_each_dev+0x78/0xc8
[    2.000321]  driver_attach+0x2c/0x38
[    2.003893]  bus_add_driver+0x14c/0x230
[    2.007724]  driver_register+0x6c/0x128
[    2.011555]  __platform_driver_register+0x50/0x60
[    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
[    2.020786]  do_one_initcall+0x4c/0x2d0
[    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
[    2.024618]  kernel_init_freeable+0x214/0x280
[    2.024624]  kernel_init+0x1c/0x120
[    2.037849]  ret_from_fork+0x10/0x30
[    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc5-next-20200921 #1
[    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    2.055166] Call trace:
[    2.057606]  dump_backtrace+0x0/0x1e0
[    2.061263]  show_stack+0x20/0x30
[    2.064574]  dump_stack+0xf8/0x168
[    2.067972]  __warn+0xfc/0x178
[    2.071023]  report_bug+0xfc/0x170
[    2.074419]  bug_handler+0x28/0x70
[    2.077816]  call_break_hook+0x70/0x88
[    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
[    2.081560]  brk_handler+0x24/0x68
[    2.081566]  do_debug_exception+0xb8/0x130
[    2.094442]  el1_sync_handler+0xd8/0x120
[    2.098360]  el1_sync+0x80/0x100
[    2.101583]  nand_scan_with_ids+0x110c/0x1498
[    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
[    2.110115]  platform_drv_probe+0x5c/0xb0
[    2.114120]  really_probe+0xf0/0x4d8
[    2.117691]  driver_probe_device+0xfc/0x168
[    2.121871]  device_driver_attach+0x7c/0x88
[    2.126050]  __driver_attach+0xac/0x178
[    2.129882]  bus_for_each_dev+0x78/0xc8
[    2.133714]  driver_attach+0x2c/0x38
[    2.137284]  bus_add_driver+0x14c/0x230
[    2.141116]  driver_register+0x6c/0x128
[    2.144946]  __platform_driver_register+0x50/0x60
[    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
[    2.154173]  do_one_initcall+0x4c/0x2d0
[    2.158004]  kernel_init_freeable+0x214/0x280
[    2.162358]  kernel_init+0x1c/0x120
[    2.165841]  ret_from_fork+0x10/0x30
[    2.169415] ---[ end trace d051012f465b08eb ]---
[    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
[    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
[    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[    2.196301] spi-nor: probe of spi1.0 failed with error -2
[    2.203202] libphy: Fixed MDIO Bus: probed
[    2.208607] thunder_xcv, ver 1.0
[    2.211860] thunder_bgx, ver 1.0
[    2.215114] nicpf, ver 1.0
[    2.218785] hclge is initializing
[    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
Family - version
[    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
[    2.234716] e1000: Intel(R) PRO/1000 Network Driver
[    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
[    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
[    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
for IOMMU page tables
[    2.269752] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
[    2.278544] Mem abort info:
[    2.281334]   ESR = 0x96000004
[    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
[    2.289705]   SET = 0, FnV = 0
[    2.292759]   EA = 0, S1PTW = 0
[    2.295900] Data abort info:
[    2.298781]   ISV = 0, ISS = 0x00000004
[    2.302618]   CM = 0, WnR = 0
[    2.305581] [0000000000000000] user address but active_mm is swapper
[    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    2.317512] Modules linked in:
[    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
  5.9.0-rc5-next-20200921 #1
[    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
[    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
[    2.353203] sp : ffff80001005b9b0
[    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
[    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
[    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
[    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
[    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
[    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
[    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
[    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
[    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
[    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
[    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
[    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
[    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
[    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
[    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
[    2.436176] Call trace:
[    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
[    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
[    2.449409]  iommu_probe_device+0x6c/0x120
[    2.453501]  of_iommu_configure+0x134/0x218
[    2.457683]  of_dma_configure_id+0x110/0x2e8
[    2.461950]  pci_dma_configure+0x4c/0xd8
[    2.465870]  really_probe+0xac/0x4d8
[    2.469441]  driver_probe_device+0xfc/0x168
[    2.473620]  device_driver_attach+0x7c/0x88
[    2.477799]  __driver_attach+0xac/0x178
[    2.481631]  bus_for_each_dev+0x78/0xc8
[    2.485463]  driver_attach+0x2c/0x38
[    2.489033]  bus_add_driver+0x14c/0x230
[    2.492865]  driver_register+0x6c/0x128
[    2.496696]  __pci_register_driver+0x4c/0x58
[    2.500964]  e1000_init_module+0x44/0x50
[    2.504882]  do_one_initcall+0x4c/0x2d0
[    2.508714]  kernel_init_freeable+0x214/0x280
[    2.513068]  kernel_init+0x1c/0x120
[    2.516552]  ret_from_fork+0x10/0x30
[    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
[    2.526224] ---[ end trace d051012f465b08ec ]---
[    2.530848] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[    2.538506] SMP: stopping secondary CPUs
[    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
[    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
[    2.552700] CPU features: 0x0240022,21806008
[    2.556965] Memory Limit: none

full test log,
https://lavalab.nxp.com/scheduler/job/86650#L849

-- 
Linaro LKFT
https://lkft.linaro.org
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-21 13:20 arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables Naresh Kamboju
@ 2020-09-21 14:51 ` Robin Murphy
  2020-09-24  9:03 ` Joerg Roedel
  1 sibling, 0 replies; 9+ messages in thread
From: Robin Murphy @ 2020-09-21 14:51 UTC (permalink / raw)
  To: Naresh Kamboju, linux-mtd, open list, Linux-Next Mailing List,
	lkft-triage, open list:IOMMU DRIVERS
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, Miquel Raynal, Suram Suram,
	masonccyang

On 2020-09-21 14:20, Naresh Kamboju wrote:
[...]
> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
> for IOMMU page tables

Ah, I know what's going on there - the dma_range_map stuff has 
overlooked a subtlety, but it's easily fixed.

> [    2.269752] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000000

...although either way that's really not how we should subsequently 
handle failing to allocate a pagetable. I guess I'll take a look into 
what the deal is there as well :(

Robin.

> [    2.278544] Mem abort info:
> [    2.281334]   ESR = 0x96000004
> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
> [    2.289705]   SET = 0, FnV = 0
> [    2.292759]   EA = 0, S1PTW = 0
> [    2.295900] Data abort info:
> [    2.298781]   ISV = 0, ISS = 0x00000004
> [    2.302618]   CM = 0, WnR = 0
> [    2.305581] [0000000000000000] user address but active_mm is swapper
> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [    2.317512] Modules linked in:
> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>    5.9.0-rc5-next-20200921 #1
> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.353203] sp : ffff80001005b9b0
> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
> [    2.436176] Call trace:
> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.449409]  iommu_probe_device+0x6c/0x120
> [    2.453501]  of_iommu_configure+0x134/0x218
> [    2.457683]  of_dma_configure_id+0x110/0x2e8
> [    2.461950]  pci_dma_configure+0x4c/0xd8
> [    2.465870]  really_probe+0xac/0x4d8
> [    2.469441]  driver_probe_device+0xfc/0x168
> [    2.473620]  device_driver_attach+0x7c/0x88
> [    2.477799]  __driver_attach+0xac/0x178
> [    2.481631]  bus_for_each_dev+0x78/0xc8
> [    2.485463]  driver_attach+0x2c/0x38
> [    2.489033]  bus_add_driver+0x14c/0x230
> [    2.492865]  driver_register+0x6c/0x128
> [    2.496696]  __pci_register_driver+0x4c/0x58
> [    2.500964]  e1000_init_module+0x44/0x50
> [    2.504882]  do_one_initcall+0x4c/0x2d0
> [    2.508714]  kernel_init_freeable+0x214/0x280
> [    2.513068]  kernel_init+0x1c/0x120
> [    2.516552]  ret_from_fork+0x10/0x30
> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
> [    2.526224] ---[ end trace d051012f465b08ec ]---
> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [    2.538506] SMP: stopping secondary CPUs
> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
> [    2.552700] CPU features: 0x0240022,21806008
> [    2.556965] Memory Limit: none
> 
> full test log,
> https://lavalab.nxp.com/scheduler/job/86650#L849
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-21 13:20 arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables Naresh Kamboju
  2020-09-21 14:51 ` Robin Murphy
@ 2020-09-24  9:03 ` Joerg Roedel
  2020-09-24  9:08   ` Robin Murphy
  1 sibling, 1 reply; 9+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:03 UTC (permalink / raw)
  To: Naresh Kamboju, Will Deacon, Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang

Adding Will and Robin.

On Mon, Sep 21, 2020 at 06:50:40PM +0530, Naresh Kamboju wrote:
> arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
> 5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
> kernel panic happened.
> 
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
> 
> metadata:
>   git branch: master
>   git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
>   git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
>   git describe: next-20200921
>   make_kernelversion: 5.9.0-rc5
>   kernel-config:
> https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config
> 
> 
> crash log,
> 
> [    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> [    1.818202] nand: Micron MT29F16G08ABACAWP
> [    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> 4096, OOB size: 224
> [    1.830078] ------------[ cut here ]------------
> [    1.834703] Driver must set ecc.strength when using hardware ECC
> [    1.840739] WARNING: CPU: 1 PID: 1 at
> drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
> [    1.850568] Modules linked in:
> [    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200921 #1
> [    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
> [    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
> [    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
> [    1.882774] sp : ffff80001005ba50
> [    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
> [    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
> [    1.896706] x25: 000000000000002c x24: ffff0082edf98578
> [    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
> [    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
> [    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
> [    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
> [    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
> [    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
> [    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
> [    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
> [    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
> [    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
> [    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
> [    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
> [    1.965748] Call trace:
> [    1.968189]  nand_scan_with_ids+0x110c/0x1498
> [    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
> [    1.976723]  platform_drv_probe+0x5c/0xb0
> [    1.980729]  really_probe+0xf0/0x4d8
> [    1.984300]  driver_probe_device+0xfc/0x168
> [    1.988480]  device_driver_attach+0x7c/0x88
> [    1.992659]  __driver_attach+0xac/0x178
> [    1.996490]  bus_for_each_dev+0x78/0xc8
> [    2.000321]  driver_attach+0x2c/0x38
> [    2.003893]  bus_add_driver+0x14c/0x230
> [    2.007724]  driver_register+0x6c/0x128
> [    2.011555]  __platform_driver_register+0x50/0x60
> [    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
> [    2.020786]  do_one_initcall+0x4c/0x2d0
> [    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
> [    2.024618]  kernel_init_freeable+0x214/0x280
> [    2.024624]  kernel_init+0x1c/0x120
> [    2.037849]  ret_from_fork+0x10/0x30
> [    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
> 5.9.0-rc5-next-20200921 #1
> [    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.055166] Call trace:
> [    2.057606]  dump_backtrace+0x0/0x1e0
> [    2.061263]  show_stack+0x20/0x30
> [    2.064574]  dump_stack+0xf8/0x168
> [    2.067972]  __warn+0xfc/0x178
> [    2.071023]  report_bug+0xfc/0x170
> [    2.074419]  bug_handler+0x28/0x70
> [    2.077816]  call_break_hook+0x70/0x88
> [    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
> [    2.081560]  brk_handler+0x24/0x68
> [    2.081566]  do_debug_exception+0xb8/0x130
> [    2.094442]  el1_sync_handler+0xd8/0x120
> [    2.098360]  el1_sync+0x80/0x100
> [    2.101583]  nand_scan_with_ids+0x110c/0x1498
> [    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
> [    2.110115]  platform_drv_probe+0x5c/0xb0
> [    2.114120]  really_probe+0xf0/0x4d8
> [    2.117691]  driver_probe_device+0xfc/0x168
> [    2.121871]  device_driver_attach+0x7c/0x88
> [    2.126050]  __driver_attach+0xac/0x178
> [    2.129882]  bus_for_each_dev+0x78/0xc8
> [    2.133714]  driver_attach+0x2c/0x38
> [    2.137284]  bus_add_driver+0x14c/0x230
> [    2.141116]  driver_register+0x6c/0x128
> [    2.144946]  __platform_driver_register+0x50/0x60
> [    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
> [    2.154173]  do_one_initcall+0x4c/0x2d0
> [    2.158004]  kernel_init_freeable+0x214/0x280
> [    2.162358]  kernel_init+0x1c/0x120
> [    2.165841]  ret_from_fork+0x10/0x30
> [    2.169415] ---[ end trace d051012f465b08eb ]---
> [    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
> [    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
> [    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
> [    2.196301] spi-nor: probe of spi1.0 failed with error -2
> [    2.203202] libphy: Fixed MDIO Bus: probed
> [    2.208607] thunder_xcv, ver 1.0
> [    2.211860] thunder_bgx, ver 1.0
> [    2.215114] nicpf, ver 1.0
> [    2.218785] hclge is initializing
> [    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
> Family - version
> [    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
> [    2.234716] e1000: Intel(R) PRO/1000 Network Driver
> [    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
> [    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
> [    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
> for IOMMU page tables
> [    2.269752] Unable to handle kernel NULL pointer dereference at
> virtual address 0000000000000000
> [    2.278544] Mem abort info:
> [    2.281334]   ESR = 0x96000004
> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
> [    2.289705]   SET = 0, FnV = 0
> [    2.292759]   EA = 0, S1PTW = 0
> [    2.295900] Data abort info:
> [    2.298781]   ISV = 0, ISS = 0x00000004
> [    2.302618]   CM = 0, WnR = 0
> [    2.305581] [0000000000000000] user address but active_mm is swapper
> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [    2.317512] Modules linked in:
> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>   5.9.0-rc5-next-20200921 #1
> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.353203] sp : ffff80001005b9b0
> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
> [    2.436176] Call trace:
> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
> [    2.449409]  iommu_probe_device+0x6c/0x120
> [    2.453501]  of_iommu_configure+0x134/0x218
> [    2.457683]  of_dma_configure_id+0x110/0x2e8
> [    2.461950]  pci_dma_configure+0x4c/0xd8
> [    2.465870]  really_probe+0xac/0x4d8
> [    2.469441]  driver_probe_device+0xfc/0x168
> [    2.473620]  device_driver_attach+0x7c/0x88
> [    2.477799]  __driver_attach+0xac/0x178
> [    2.481631]  bus_for_each_dev+0x78/0xc8
> [    2.485463]  driver_attach+0x2c/0x38
> [    2.489033]  bus_add_driver+0x14c/0x230
> [    2.492865]  driver_register+0x6c/0x128
> [    2.496696]  __pci_register_driver+0x4c/0x58
> [    2.500964]  e1000_init_module+0x44/0x50
> [    2.504882]  do_one_initcall+0x4c/0x2d0
> [    2.508714]  kernel_init_freeable+0x214/0x280
> [    2.513068]  kernel_init+0x1c/0x120
> [    2.516552]  ret_from_fork+0x10/0x30
> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
> [    2.526224] ---[ end trace d051012f465b08ec ]---
> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [    2.538506] SMP: stopping secondary CPUs
> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
> [    2.552700] CPU features: 0x0240022,21806008
> [    2.556965] Memory Limit: none
> 
> full test log,
> https://lavalab.nxp.com/scheduler/job/86650#L849
> 
> -- 
> Linaro LKFT
> https://lkft.linaro.org
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:03 ` Joerg Roedel
@ 2020-09-24  9:08   ` Robin Murphy
  2020-09-24  9:25     ` Joerg Roedel
  0 siblings, 1 reply; 9+ messages in thread
From: Robin Murphy @ 2020-09-24  9:08 UTC (permalink / raw)
  To: Joerg Roedel, Naresh Kamboju, Will Deacon
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Zhiqiang.Hou, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang

Hi Joerg,

On 2020-09-24 10:03, Joerg Roedel wrote:
> Adding Will and Robin.

This should be fixed by 
https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u 
(already in linux-next).

Thanks,
Robin.

> On Mon, Sep 21, 2020 at 06:50:40PM +0530, Naresh Kamboju wrote:
>> arm64  Freescale Layerscape 2088A RDB Board boot failed with linux-next
>> 5.9.0-rc5-next-20200921 kernel tag version. The kernel warning and then
>> kernel panic happened.
>>
>> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
>>
>> metadata:
>>    git branch: master
>>    git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
>>    git commit: b10b8ad862118bf42c28a98b0f067619aadcfb23
>>    git describe: next-20200921
>>    make_kernelversion: 5.9.0-rc5
>>    kernel-config:
>> https://builds.tuxbuild.com/GxPuM0SSznSoSYYG8deYpQ/kernel.config
>>
>>
>> crash log,
>>
>> [    1.811830] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
>> [    1.818202] nand: Micron MT29F16G08ABACAWP
>> [    1.822314] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
>> 4096, OOB size: 224
>> [    1.830078] ------------[ cut here ]------------
>> [    1.834703] Driver must set ecc.strength when using hardware ECC
>> [    1.840739] WARNING: CPU: 1 PID: 1 at
>> drivers/mtd/nand/raw/nand_base.c:5671 nand_scan_with_ids+0x110c/0x1498
>> [    1.850568] Modules linked in:
>> [    1.853621] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.9.0-rc5-next-20200921 #1
>> [    1.861015] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    1.867368] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
>> [    1.873373] pc : nand_scan_with_ids+0x110c/0x1498
>> [    1.878073] lr : nand_scan_with_ids+0x110c/0x1498
>> [    1.882774] sp : ffff80001005ba50
>> [    1.886083] x29: ffff80001005ba50 x28: 0000000000000000
>> [    1.891395] x27: ffff0082edf98638 x26: 0000000000000048
>> [    1.896706] x25: 000000000000002c x24: ffff0082edf98578
>> [    1.902018] x23: 0000000000000001 x22: ffff0082ee6b0000
>> [    1.907329] x21: ffff0082edf98840 x20: 0000000000000000
>> [    1.912640] x19: ffff0082edf98080 x18: 0000000000000010
>> [    1.917951] x17: 0000000000000010 x16: 00000000833b5ff2
>> [    1.923262] x15: ffff0082ee6b0480 x14: ffffffffffffffff
>> [    1.928572] x13: ffff80009005b737 x12: ffff80001005b73f
>> [    1.933883] x11: ffff80001005ba50 x10: ffff80001005ba50
>> [    1.939194] x9 : ffffdc379157bfbc x8 : 657274732e636365
>> [    1.944504] x7 : 2074657320747375 x6 : ffffdc37937ba000
>> [    1.949815] x5 : ffffdc37937baa58 x4 : ffff80001005b840
>> [    1.955125] x3 : 0000000000000000 x2 : ffff0082ee6b0000
>> [    1.960436] x1 : 4732f0d38a403700 x0 : 0000000000000000
>> [    1.965748] Call trace:
>> [    1.968189]  nand_scan_with_ids+0x110c/0x1498
>> [    1.972542]  fsl_ifc_nand_probe+0x474/0x6e0
>> [    1.976723]  platform_drv_probe+0x5c/0xb0
>> [    1.980729]  really_probe+0xf0/0x4d8
>> [    1.984300]  driver_probe_device+0xfc/0x168
>> [    1.988480]  device_driver_attach+0x7c/0x88
>> [    1.992659]  __driver_attach+0xac/0x178
>> [    1.996490]  bus_for_each_dev+0x78/0xc8
>> [    2.000321]  driver_attach+0x2c/0x38
>> [    2.003893]  bus_add_driver+0x14c/0x230
>> [    2.007724]  driver_register+0x6c/0x128
>> [    2.011555]  __platform_driver_register+0x50/0x60
>> [    2.016258]  fsl_ifc_nand_driver_init+0x24/0x30
>> [    2.020786]  do_one_initcall+0x4c/0x2d0
>> [    2.024560] ata1: SATA link down (SStatus 0 SControl 300)
>> [    2.024618]  kernel_init_freeable+0x214/0x280
>> [    2.024624]  kernel_init+0x1c/0x120
>> [    2.037849]  ret_from_fork+0x10/0x30
>> [    2.041420] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.9.0-rc5-next-20200921 #1
>> [    2.048815] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    2.055166] Call trace:
>> [    2.057606]  dump_backtrace+0x0/0x1e0
>> [    2.061263]  show_stack+0x20/0x30
>> [    2.064574]  dump_stack+0xf8/0x168
>> [    2.067972]  __warn+0xfc/0x178
>> [    2.071023]  report_bug+0xfc/0x170
>> [    2.074419]  bug_handler+0x28/0x70
>> [    2.077816]  call_break_hook+0x70/0x88
>> [    2.080559] ata2: SATA link down (SStatus 0 SControl 300)
>> [    2.081560]  brk_handler+0x24/0x68
>> [    2.081566]  do_debug_exception+0xb8/0x130
>> [    2.094442]  el1_sync_handler+0xd8/0x120
>> [    2.098360]  el1_sync+0x80/0x100
>> [    2.101583]  nand_scan_with_ids+0x110c/0x1498
>> [    2.105935]  fsl_ifc_nand_probe+0x474/0x6e0
>> [    2.110115]  platform_drv_probe+0x5c/0xb0
>> [    2.114120]  really_probe+0xf0/0x4d8
>> [    2.117691]  driver_probe_device+0xfc/0x168
>> [    2.121871]  device_driver_attach+0x7c/0x88
>> [    2.126050]  __driver_attach+0xac/0x178
>> [    2.129882]  bus_for_each_dev+0x78/0xc8
>> [    2.133714]  driver_attach+0x2c/0x38
>> [    2.137284]  bus_add_driver+0x14c/0x230
>> [    2.141116]  driver_register+0x6c/0x128
>> [    2.144946]  __platform_driver_register+0x50/0x60
>> [    2.149647]  fsl_ifc_nand_driver_init+0x24/0x30
>> [    2.154173]  do_one_initcall+0x4c/0x2d0
>> [    2.158004]  kernel_init_freeable+0x214/0x280
>> [    2.162358]  kernel_init+0x1c/0x120
>> [    2.165841]  ret_from_fork+0x10/0x30
>> [    2.169415] ---[ end trace d051012f465b08eb ]---
>> [    2.174073] fsl,ifc-nand: probe of 530000000.nand failed with error -22
>> [    2.181882] spi-nor spi0.0: unrecognized JEDEC id bytes: 1c 38 78 e1 e3 c7
>> [    2.189409] spi-nor spi1.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
>> [    2.196301] spi-nor: probe of spi1.0 failed with error -2
>> [    2.203202] libphy: Fixed MDIO Bus: probed
>> [    2.208607] thunder_xcv, ver 1.0
>> [    2.211860] thunder_bgx, ver 1.0
>> [    2.215114] nicpf, ver 1.0
>> [    2.218785] hclge is initializing
>> [    2.222141] hns3: Hisilicon Ethernet Network Driver for Hip08
>> Family - version
>> [    2.229371] hns3: Copyright (c) 2017 Huawei Corporation.
>> [    2.234716] e1000: Intel(R) PRO/1000 Network Driver
>> [    2.239598] e1000: Copyright (c) 1999-2006 Intel Corporation.
>> [    2.245370] e1000e: Intel(R) PRO/1000 Network Driver
>> [    2.250338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>> [    2.256403] e1000e 0000:01:00.0: Adding to iommu group 0
>> [    2.261733] arm-smmu 5000000.iommu: Cannot accommodate DMA offset
>> for IOMMU page tables
>> [    2.269752] Unable to handle kernel NULL pointer dereference at
>> virtual address 0000000000000000
>> [    2.278544] Mem abort info:
>> [    2.281334]   ESR = 0x96000004
>> [    2.284389]   EC = 0x25: DABT (current EL), IL = 32 bits
>> [    2.289705]   SET = 0, FnV = 0
>> [    2.292759]   EA = 0, S1PTW = 0
>> [    2.295900] Data abort info:
>> [    2.298781]   ISV = 0, ISS = 0x00000004
>> [    2.302618]   CM = 0, WnR = 0
>> [    2.305581] [0000000000000000] user address but active_mm is swapper
>> [    2.311941] Internal error: Oops: 96000004 [#1] PREEMPT SMP
>> [    2.317512] Modules linked in:
>> [    2.320566] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
>>    5.9.0-rc5-next-20200921 #1
>> [    2.329352] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
>> [    2.335705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
>> [    2.341715] pc : arm_smmu_flush_iotlb_all+0x28/0x90
>> [    2.346590] lr : iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
>> [    2.353203] sp : ffff80001005b9b0
>> [    2.356511] x29: ffff80001005b9b0 x28: 0000000000000000
>> [    2.361822] x27: ffffdc3792e904e0 x26: ffff80001005ba48
>> [    2.367134] x25: ffff0082ee6b0000 x24: ffff0082ed88e0a8
>> [    2.372445] x23: 00000000fffffff4 x22: 0000000000001000
>> [    2.377755] x21: ffff80001005ba48 x20: 0000000000000000
>> [    2.383066] x19: ffff0082cceeeb58 x18: 0000000000000010
>> [    2.388377] x17: 0000000000000000 x16: 00000000833b5ff2
>> [    2.393688] x15: ffff0082ee6b0480 x14: 203a756d6d6f692e
>> [    2.398999] x13: 3030303030303520 x12: 61646f6d6d6f6363
>> [    2.404311] x11: 6120746f6e6e6143 x10: 6f66207465736666
>> [    2.409622] x9 : ffffdc3791d31078 x8 : ffff0082ed8ffd00
>> [    2.414933] x7 : 0000000000000000 x6 : 000000000000003f
>> [    2.420244] x5 : 0000000000000040 x4 : ffff80001005b970
>> [    2.425554] x3 : 0000000000000000 x2 : 0000000000000000
>> [    2.430865] x1 : ffffdc37927dd2f0 x0 : ffff0082cceeeb58
>> [    2.436176] Call trace:
>> [    2.438618]  arm_smmu_flush_iotlb_all+0x28/0x90
>> [    2.443144]  iommu_create_device_direct_mappings.isra.0+0x1f0/0x218
>> [    2.449409]  iommu_probe_device+0x6c/0x120
>> [    2.453501]  of_iommu_configure+0x134/0x218
>> [    2.457683]  of_dma_configure_id+0x110/0x2e8
>> [    2.461950]  pci_dma_configure+0x4c/0xd8
>> [    2.465870]  really_probe+0xac/0x4d8
>> [    2.469441]  driver_probe_device+0xfc/0x168
>> [    2.473620]  device_driver_attach+0x7c/0x88
>> [    2.477799]  __driver_attach+0xac/0x178
>> [    2.481631]  bus_for_each_dev+0x78/0xc8
>> [    2.485463]  driver_attach+0x2c/0x38
>> [    2.489033]  bus_add_driver+0x14c/0x230
>> [    2.492865]  driver_register+0x6c/0x128
>> [    2.496696]  __pci_register_driver+0x4c/0x58
>> [    2.500964]  e1000_init_module+0x44/0x50
>> [    2.504882]  do_one_initcall+0x4c/0x2d0
>> [    2.508714]  kernel_init_freeable+0x214/0x280
>> [    2.513068]  kernel_init+0x1c/0x120
>> [    2.516552]  ret_from_fork+0x10/0x30
>> [    2.520124] Code: 910003fd a90153f3 aa0003f3 f85a8014 (f9400280)
>> [    2.526224] ---[ end trace d051012f465b08ec ]---
>> [    2.530848] Kernel panic - not syncing: Attempted to kill init!
>> exitcode=0x0000000b
>> [    2.538506] SMP: stopping secondary CPUs
>> [    2.542431] Kernel Offset: 0x5c3781480000 from 0xffff800010000000
>> [    2.548521] PHYS_OFFSET: 0xffffdb6ac0000000
>> [    2.552700] CPU features: 0x0240022,21806008
>> [    2.556965] Memory Limit: none
>>
>> full test log,
>> https://lavalab.nxp.com/scheduler/job/86650#L849
>>
>> -- 
>> Linaro LKFT
>> https://lkft.linaro.org
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:08   ` Robin Murphy
@ 2020-09-24  9:25     ` Joerg Roedel
  2020-09-24  9:36       ` Robin Murphy
  0 siblings, 1 reply; 9+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:25 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

Hi Robin,

On Thu, Sep 24, 2020 at 10:08:46AM +0100, Robin Murphy wrote:
> This should be fixed by https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u
> (already in linux-next).

Thanks! The question remains why this goes through the dma-mapping tree,
was it caused by a patch there?

Regards,

	Joerg
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:25     ` Joerg Roedel
@ 2020-09-24  9:36       ` Robin Murphy
  2020-09-24  9:56         ` Joerg Roedel
  0 siblings, 1 reply; 9+ messages in thread
From: Robin Murphy @ 2020-09-24  9:36 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

On 2020-09-24 10:25, Joerg Roedel wrote:
> Hi Robin,
> 
> On Thu, Sep 24, 2020 at 10:08:46AM +0100, Robin Murphy wrote:
>> This should be fixed by https://lore.kernel.org/linux-iommu/daedc9364a19dc07487e4d07b8768b1e5934abd4.1600700881.git.robin.murphy@arm.com/T/#u
>> (already in linux-next).
> 
> Thanks! The question remains why this goes through the dma-mapping tree,
> was it caused by a patch there?

Yes, the issue was introduced by one of the changes in "dma-mapping: 
introduce DMA range map, supplanting dma_pfn_offset", so it only existed 
in the dma-mapping/for-next branch anyway.

Robin.
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:36       ` Robin Murphy
@ 2020-09-24  9:56         ` Joerg Roedel
  2020-10-09 13:54           ` Naresh Kamboju
  0 siblings, 1 reply; 9+ messages in thread
From: Joerg Roedel @ 2020-09-24  9:56 UTC (permalink / raw)
  To: Robin Murphy
  Cc: Poonam Aggrwal, robh, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Naresh Kamboju, open list, lkft-triage,
	open list:IOMMU DRIVERS, Linux-Next Mailing List, linux-mtd,
	Miquel Raynal, Suram Suram, masonccyang, Will Deacon,
	Zhiqiang.Hou

On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> Yes, the issue was introduced by one of the changes in "dma-mapping:
> introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> the dma-mapping/for-next branch anyway.

Okay, alright then.

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-09-24  9:56         ` Joerg Roedel
@ 2020-10-09 13:54           ` Naresh Kamboju
  2020-10-09 13:56             ` Naresh Kamboju
  0 siblings, 1 reply; 9+ messages in thread
From: Naresh Kamboju @ 2020-10-09 13:54 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Z.Q. Hou, Will Deacon, open list,
	lkft-triage, open list:IOMMU DRIVERS, Linux-Next Mailing List,
	linux-mtd, Miquel Raynal, Suram Suram, masonccyang, Robin Murphy

On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
>
> On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > the dma-mapping/for-next branch anyway.

FYI,
The reported problem still exists
>
> Okay, alright then.
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables
  2020-10-09 13:54           ` Naresh Kamboju
@ 2020-10-09 13:56             ` Naresh Kamboju
  0 siblings, 0 replies; 9+ messages in thread
From: Naresh Kamboju @ 2020-10-09 13:56 UTC (permalink / raw)
  To: Joerg Roedel
  Cc: Poonam Aggrwal, Rob Herring, Joerg Roedel, Arnd Bergmann,
	Richard Weinberger, Z.Q. Hou, Will Deacon, open list,
	lkft-triage, open list:IOMMU DRIVERS, Linux-Next Mailing List,
	linux-mtd, Miquel Raynal, Suram Suram, masonccyang, Robin Murphy

On Fri, 9 Oct 2020 at 19:24, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
>
>
> On Thu, 24 Sep 2020 at 15:26, Joerg Roedel <joro@8bytes.org> wrote:
> >
> > On Thu, Sep 24, 2020 at 10:36:47AM +0100, Robin Murphy wrote:
> > > Yes, the issue was introduced by one of the changes in "dma-mapping:
> > > introduce DMA range map, supplanting dma_pfn_offset", so it only existed in
> > > the dma-mapping/for-next branch anyway.
>

FYI,
The reported problem still exists on 5.9.0-rc8-next-20201009.

[    1.843814] Driver must set ecc.strength when using hardware ECC
[    1.849847] WARNING: CPU: 4 PID: 1 at
drivers/mtd/nand/raw/nand_base.c:5687 nand_scan_with_ids+0x1450/0x1470
[    1.859676] Modules linked in:
[    1.862730] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
5.9.0-rc8-next-20201009 #1
[    1.870125] Hardware name: Freescale Layerscape 2088A RDB Board (DT)
[    1.876478] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[    1.882483] pc : nand_scan_with_ids+0x1450/0x1470
[    1.887183] lr : nand_scan_with_ids+0x1450/0x1470

full test log,
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20201009/testrun/3284876/suite/linux-log-parser/test/check-kernel-warning-92014/log

> >
> > Okay, alright then.
> >

- Naresh
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-21 13:20 arm-smmu 5000000.iommu: Cannot accommodate DMA offset for IOMMU page tables Naresh Kamboju
2020-09-21 14:51 ` Robin Murphy
2020-09-24  9:03 ` Joerg Roedel
2020-09-24  9:08   ` Robin Murphy
2020-09-24  9:25     ` Joerg Roedel
2020-09-24  9:36       ` Robin Murphy
2020-09-24  9:56         ` Joerg Roedel
2020-10-09 13:54           ` Naresh Kamboju
2020-10-09 13:56             ` Naresh Kamboju

IOMMU Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-iommu/0 linux-iommu/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-iommu linux-iommu/ https://lore.kernel.org/linux-iommu \
		iommu@lists.linux-foundation.org
	public-inbox-index linux-iommu

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linux-foundation.lists.iommu


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git