RE: [PATCH v4 02/15] iommu: Report domain nesting info

["Liu, Yi L" <yi.l.liu@intel.com>]

Hi Eric,

> From: Auger Eric <eric.auger@redhat.com>
> Sent: Monday, July 6, 2020 5:34 PM
> 
> On 7/4/20 1:26 PM, Liu Yi L wrote:
> > IOMMUs that support nesting translation needs report the capability info
> need to report
> > to userspace, e.g. the format of first level/stage paging structures.
> >
> > This patch reports nesting info by DOMAIN_ATTR_NESTING. Caller can get
> > nesting info after setting DOMAIN_ATTR_NESTING.
> >
> > Cc: Kevin Tian <kevin.tian@intel.com>
> > CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > Cc: Alex Williamson <alex.williamson@redhat.com>
> > Cc: Eric Auger <eric.auger@redhat.com>
> > Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
> > Cc: Joerg Roedel <joro@8bytes.org>
> > Cc: Lu Baolu <baolu.lu@linux.intel.com>
> > Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> > Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> > ---
> > v3 -> v4:
> > *) split the SMMU driver changes to be a separate patch
> > *) move the @addr_width and @pasid_bits from vendor specific
> >    part to generic part.
> > *) tweak the description for the @features field of struct
> >    iommu_nesting_info.
> > *) add description on the @data[] field of struct iommu_nesting_info
> >
> > v2 -> v3:
> > *) remvoe cap/ecap_mask in iommu_nesting_info.
> > *) reuse DOMAIN_ATTR_NESTING to get nesting info.
> > *) return an empty iommu_nesting_info for SMMU drivers per Jean'
> >    suggestion.
> > ---
> >  include/uapi/linux/iommu.h | 78
> ++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 78 insertions(+)
> >
> > diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
> > index 1afc661..1bfc032 100644
> > --- a/include/uapi/linux/iommu.h
> > +++ b/include/uapi/linux/iommu.h
> > @@ -332,4 +332,82 @@ struct iommu_gpasid_bind_data {
> >  	} vendor;
> >  };
> >
> > +/*
> > + * struct iommu_nesting_info - Information for nesting-capable IOMMU.
> > + *				user space should check it before using
> > + *				nesting capability.
> alignment?

oh, yes, will do it.

> > + *
> > + * @size:	size of the whole structure
> > + * @format:	PASID table entry format, the same definition with
> > + *		@format of struct iommu_gpasid_bind_data.
> the same definition as struct iommu_gpasid_bind_data @format?

right. yours is much better.

> > + * @features:	supported nesting features.
> > + * @flags:	currently reserved for future extension.
> > + * @addr_width:	The output addr width of first level/stage translation
> > + * @pasid_bits:	Maximum supported PASID bits, 0 represents no PASID
> > + *		support.
> > + * @data:	vendor specific cap info. data[] structure type can be deduced
> > + *		from @format field.
> > + *
> > + *
> +===============+===================================================
> ===+
> > + * | feature       |  Notes                                               |
> > + *
> +===============+===================================================
> ===+
> > + * | SYSWIDE_PASID |  PASIDs are managed in system-wide, instead of per   |
> > + * |               |  device. When a device is assigned to userspace or   |
> > + * |               |  VM, proper uAPI (userspace driver framework uAPI,   |
> > + * |               |  e.g. VFIO) must be used to allocate/free PASIDs for |
> > + * |               |  the assigned device.                                |
> > + * +---------------+------------------------------------------------------+
> > + * | BIND_PGTBL    |  The owner of the first level/stage page table must  |
> > + * |               |  explicitly bind the page table to associated PASID  |
> > + * |               |  (either the one specified in bind request or the    |
> > + * |               |  default PASID of iommu domain), through userspace   |
> > + * |               |  driver framework uAPI (e.g. VFIO_IOMMU_NESTING_OP). |
> > + * +---------------+------------------------------------------------------+
> > + * | CACHE_INVLD   |  The owner of the first level/stage page table must  |
> > + * |               |  explicitly invalidate the IOMMU cache through uAPI  |
> > + * |               |  provided by userspace driver framework (e.g. VFIO)  |
> > + * |               |  according to vendor-specific requirement when       |
> > + * |               |  changing the page table.                            |
> > + * +---------------+------------------------------------------------------+
> Do you foresee cases where BIND_PGTBL and CACHE_INVLD shouldn't be
> exposed as features?

sorry, I didn't quite get it. could you explain a little bit more. :-)

> > + *
> > + * @data[] types defined for @format:
> > + *
> +================================+==================================
> ===+
> > + * | @format                        | @data[]                             |
> > + *
> +================================+==================================
> ===+
> > + * | IOMMU_PASID_FORMAT_INTEL_VTD   | struct iommu_nesting_info_vtd       |
> > + * +--------------------------------+-------------------------------------+
> > + *
> > + */
> > +struct iommu_nesting_info {
> > +	__u32	size;
> > +	__u32	format;
> > +	__u32	features;
> > +#define IOMMU_NESTING_FEAT_SYSWIDE_PASID	(1 << 0)
> > +#define IOMMU_NESTING_FEAT_BIND_PGTBL		(1 << 1)
> > +#define IOMMU_NESTING_FEAT_CACHE_INVLD		(1 << 2)
> In other structs the values seem to be defined before the field

not sure. :-) I mimics the below struct from uapi/vfio.h

struct vfio_iommu_type1_dma_map {
        __u32   argsz;
        __u32   flags;
#define VFIO_DMA_MAP_FLAG_READ (1 << 0)         /* readable from device */
#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)        /* writable from device */
        __u64   vaddr;                          /* Process virtual address */
        __u64   iova;                           /* IO virtual address */
        __u64   size;                           /* Size of mapping (bytes) */
};

> > +	__u32	flags;
> > +	__u16	addr_width;
> > +	__u16	pasid_bits;
> > +	__u32	padding;
> > +	__u8	data[];
> > +};
> > +
> > +/*
> > + * struct iommu_nesting_info_vtd - Intel VT-d specific nesting info
> > + *
> spurious line

yes, will remove this line.

Regards,
Yi Liu

> > + *
> > + * @flags:	VT-d specific flags. Currently reserved for future
> > + *		extension.
> > + * @cap_reg:	Describe basic capabilities as defined in VT-d capability
> > + *		register.
> > + * @ecap_reg:	Describe the extended capabilities as defined in VT-d
> > + *		extended capability register.
> > + */
> > +struct iommu_nesting_info_vtd {
> > +	__u32	flags;
> > +	__u32	padding;
> > +	__u64	cap_reg;
> > +	__u64	ecap_reg;
> > +};
> > +
> >  #endif /* _UAPI_IOMMU_H */
> >
> Thanks
> 
> Eric

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu