[PATCHv2 0/2] iommu/arm-smmu-qcom: Add SC7280 support

[PATCHv2 0/2] iommu/arm-smmu-qcom: Add SC7280 support

[Sai Prakash Ranjan]

Patch 1 adds the sc7280 smmu compatible.
Patch 2 moves the adreno smmu check before apss smmu to enable
adreno smmu specific implementation.

Changes in v2:
 * Add a comment to make sure this order is not changed in future (Jordan)

Sai Prakash Ranjan (2):
  iommu/arm-smmu-qcom: Add SC7280 SMMU compatible
  iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)


base-commit: 7060377ce06f9cd3ed6274c0f2310463feb5baec
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCHv2 1/2] iommu/arm-smmu-qcom: Add SC7280 SMMU compatible

[Sai Prakash Ranjan]

Add compatible for SC7280 SMMU to use the Qualcomm Technologies, Inc.
specific implementation.

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 98b3a1c2a181..bea3ee0dabc2 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -166,6 +166,7 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = {
 	{ .compatible = "qcom,mdss" },
 	{ .compatible = "qcom,sc7180-mdss" },
 	{ .compatible = "qcom,sc7180-mss-pil" },
+	{ .compatible = "qcom,sc7280-mdss" },
 	{ .compatible = "qcom,sc8180x-mdss" },
 	{ .compatible = "qcom,sdm845-mdss" },
 	{ .compatible = "qcom,sdm845-mss-pil" },
@@ -330,6 +331,7 @@ static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu,
 static const struct of_device_id __maybe_unused qcom_smmu_impl_of_match[] = {
 	{ .compatible = "qcom,msm8998-smmu-v2" },
 	{ .compatible = "qcom,sc7180-smmu-500" },
+	{ .compatible = "qcom,sc7280-smmu-500" },
 	{ .compatible = "qcom,sc8180x-smmu-500" },
 	{ .compatible = "qcom,sdm630-smmu-v2" },
 	{ .compatible = "qcom,sdm845-smmu-500" },
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Sai Prakash Ranjan]

Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
both implement "arm,mmu-500" in some QTI SoCs and to run through
adreno smmu specific implementation such as enabling split pagetables
support, we need to match the "qcom,adreno-smmu" compatible first
before apss smmu or else we will be running apps smmu implementation
for adreno smmu and the additional features for adreno smmu is never
set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
and adreno smmu implementing "arm,mmu-500", so the adreno smmu
implementation is never reached because the current sequence checks
for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
specific impl and we never reach adreno smmu specific implementation.

Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index bea3ee0dabc2..03f048aebb80 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -345,11 +345,17 @@ struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu)
 {
 	const struct device_node *np = smmu->dev->of_node;
 
-	if (of_match_node(qcom_smmu_impl_of_match, np))
-		return qcom_smmu_create(smmu, &qcom_smmu_impl);
-
+	/*
+	 * Do not change this order of implementation, i.e., first adreno
+	 * smmu impl and then apss smmu since we can have both implementing
+	 * arm,mmu-500 in which case we will miss setting adreno smmu specific
+	 * features if the order is changed.
+	 */
 	if (of_device_is_compatible(np, "qcom,adreno-smmu"))
 		return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
 
+	if (of_match_node(qcom_smmu_impl_of_match, np))
+		return qcom_smmu_create(smmu, &qcom_smmu_impl);
+
 	return smmu;
 }
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Jordan Crouse]

On Fri, Feb 26, 2021 at 03:25:40PM +0530, Sai Prakash Ranjan wrote:
> Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
> both implement "arm,mmu-500" in some QTI SoCs and to run through
> adreno smmu specific implementation such as enabling split pagetables
> support, we need to match the "qcom,adreno-smmu" compatible first
> before apss smmu or else we will be running apps smmu implementation
> for adreno smmu and the additional features for adreno smmu is never
> set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
> and adreno smmu implementing "arm,mmu-500", so the adreno smmu
> implementation is never reached because the current sequence checks
> for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
> specific impl and we never reach adreno smmu specific implementation.
> 
> Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>

Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>

> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> ---
>  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index bea3ee0dabc2..03f048aebb80 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -345,11 +345,17 @@ struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu)
>  {
>  	const struct device_node *np = smmu->dev->of_node;
>  
> -	if (of_match_node(qcom_smmu_impl_of_match, np))
> -		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> -
> +	/*
> +	 * Do not change this order of implementation, i.e., first adreno
> +	 * smmu impl and then apss smmu since we can have both implementing
> +	 * arm,mmu-500 in which case we will miss setting adreno smmu specific
> +	 * features if the order is changed.
> +	 */
>  	if (of_device_is_compatible(np, "qcom,adreno-smmu"))
>  		return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
>  
> +	if (of_match_node(qcom_smmu_impl_of_match, np))
> +		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> +
>  	return smmu;
>  }
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Bjorn Andersson]

On Fri 26 Feb 03:55 CST 2021, Sai Prakash Ranjan wrote:

> Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
> both implement "arm,mmu-500" in some QTI SoCs and to run through
> adreno smmu specific implementation such as enabling split pagetables
> support, we need to match the "qcom,adreno-smmu" compatible first
> before apss smmu or else we will be running apps smmu implementation
> for adreno smmu and the additional features for adreno smmu is never
> set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
> and adreno smmu implementing "arm,mmu-500", so the adreno smmu
> implementation is never reached because the current sequence checks
> for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
> specific impl and we never reach adreno smmu specific implementation.
> 

So you're saying that you have a single SMMU instance that's compatible
with both an entry in qcom_smmu_impl_of_match[] and "qcom,adreno-smmu"?

Per your proposed change we will pick the adreno ops _only_ for this
component, essentially disabling the non-Adreno quirks selected by the
qcom impl. As such keeping the non-adreno compatible in the
qcom_smmu_impl_init[] seems to only serve to obfuscate the situation.

Don't we somehow need the combined set of quirks? (At least if we're
running this with a standard UEFI based boot flow?)

Regards,
Bjorn

> Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> ---
>  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index bea3ee0dabc2..03f048aebb80 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -345,11 +345,17 @@ struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu)
>  {
>  	const struct device_node *np = smmu->dev->of_node;
>  
> -	if (of_match_node(qcom_smmu_impl_of_match, np))
> -		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> -
> +	/*
> +	 * Do not change this order of implementation, i.e., first adreno
> +	 * smmu impl and then apss smmu since we can have both implementing
> +	 * arm,mmu-500 in which case we will miss setting adreno smmu specific
> +	 * features if the order is changed.
> +	 */
>  	if (of_device_is_compatible(np, "qcom,adreno-smmu"))
>  		return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
>  
> +	if (of_match_node(qcom_smmu_impl_of_match, np))
> +		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> +
>  	return smmu;
>  }
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Rob Clark]

On Fri, Feb 26, 2021 at 9:24 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Fri 26 Feb 03:55 CST 2021, Sai Prakash Ranjan wrote:
>
> > Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
> > both implement "arm,mmu-500" in some QTI SoCs and to run through
> > adreno smmu specific implementation such as enabling split pagetables
> > support, we need to match the "qcom,adreno-smmu" compatible first
> > before apss smmu or else we will be running apps smmu implementation
> > for adreno smmu and the additional features for adreno smmu is never
> > set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
> > and adreno smmu implementing "arm,mmu-500", so the adreno smmu
> > implementation is never reached because the current sequence checks
> > for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
> > specific impl and we never reach adreno smmu specific implementation.
> >
>
> So you're saying that you have a single SMMU instance that's compatible
> with both an entry in qcom_smmu_impl_of_match[] and "qcom,adreno-smmu"?
>
> Per your proposed change we will pick the adreno ops _only_ for this
> component, essentially disabling the non-Adreno quirks selected by the
> qcom impl. As such keeping the non-adreno compatible in the
> qcom_smmu_impl_init[] seems to only serve to obfuscate the situation.
>
> Don't we somehow need the combined set of quirks? (At least if we're
> running this with a standard UEFI based boot flow?)
>

are you thinking of the apps-smmu handover of display context bank?
That shouldn't change, the only thing that changes is that gpu-smmu
becomes an mmu-500, whereas previously only apps-smmu was..

BR,
-R
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Jordan Crouse]

On Fri, Feb 26, 2021 at 11:24:52AM -0600, Bjorn Andersson wrote:
> On Fri 26 Feb 03:55 CST 2021, Sai Prakash Ranjan wrote:
> 
> > Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
> > both implement "arm,mmu-500" in some QTI SoCs and to run through
> > adreno smmu specific implementation such as enabling split pagetables
> > support, we need to match the "qcom,adreno-smmu" compatible first
> > before apss smmu or else we will be running apps smmu implementation
> > for adreno smmu and the additional features for adreno smmu is never
> > set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
> > and adreno smmu implementing "arm,mmu-500", so the adreno smmu
> > implementation is never reached because the current sequence checks
> > for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
> > specific impl and we never reach adreno smmu specific implementation.
> > 
> 
> So you're saying that you have a single SMMU instance that's compatible
> with both an entry in qcom_smmu_impl_of_match[] and "qcom,adreno-smmu"?
> 
> Per your proposed change we will pick the adreno ops _only_ for this
> component, essentially disabling the non-Adreno quirks selected by the
> qcom impl. As such keeping the non-adreno compatible in the
> qcom_smmu_impl_init[] seems to only serve to obfuscate the situation.
> 
> Don't we somehow need the combined set of quirks? (At least if we're
> running this with a standard UEFI based boot flow?)

We *do* need the combined set of quirks, so there has to be an adreno-smmu
impelmentation that matches the "generic" implementation with a few extra
function hooks added on. I'm not sure if there is a clever way to figure out how
to meld the implementation hooks at runtime but the alternative is to just make
sure that the adreno-smmu static struct calls the same quirks as its generic
partner.

Jordan

> > Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>
> > Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> > ---
> >  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 12 +++++++++---
> >  1 file changed, 9 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > index bea3ee0dabc2..03f048aebb80 100644
> > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > @@ -345,11 +345,17 @@ struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu)
> >  {
> >  	const struct device_node *np = smmu->dev->of_node;
> >  
> > -	if (of_match_node(qcom_smmu_impl_of_match, np))
> > -		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> > -
> > +	/*
> > +	 * Do not change this order of implementation, i.e., first adreno
> > +	 * smmu impl and then apss smmu since we can have both implementing
> > +	 * arm,mmu-500 in which case we will miss setting adreno smmu specific
> > +	 * features if the order is changed.
> > +	 */
> >  	if (of_device_is_compatible(np, "qcom,adreno-smmu"))
> >  		return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
> >  
> > +	if (of_match_node(qcom_smmu_impl_of_match, np))
> > +		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> > +
> >  	return smmu;
> >  }
> > -- 
> > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> > of Code Aurora Forum, hosted by The Linux Foundation
> > 
> _______________________________________________
> iommu mailing list
> iommu@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Bjorn Andersson]

On Fri 26 Feb 12:23 CST 2021, Rob Clark wrote:

> On Fri, Feb 26, 2021 at 9:24 AM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > On Fri 26 Feb 03:55 CST 2021, Sai Prakash Ranjan wrote:
> >
> > > Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
> > > both implement "arm,mmu-500" in some QTI SoCs and to run through
> > > adreno smmu specific implementation such as enabling split pagetables
> > > support, we need to match the "qcom,adreno-smmu" compatible first
> > > before apss smmu or else we will be running apps smmu implementation
> > > for adreno smmu and the additional features for adreno smmu is never
> > > set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
> > > and adreno smmu implementing "arm,mmu-500", so the adreno smmu
> > > implementation is never reached because the current sequence checks
> > > for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
> > > specific impl and we never reach adreno smmu specific implementation.
> > >
> >
> > So you're saying that you have a single SMMU instance that's compatible
> > with both an entry in qcom_smmu_impl_of_match[] and "qcom,adreno-smmu"?
> >
> > Per your proposed change we will pick the adreno ops _only_ for this
> > component, essentially disabling the non-Adreno quirks selected by the
> > qcom impl. As such keeping the non-adreno compatible in the
> > qcom_smmu_impl_init[] seems to only serve to obfuscate the situation.
> >
> > Don't we somehow need the combined set of quirks? (At least if we're
> > running this with a standard UEFI based boot flow?)
> >
> 
> are you thinking of the apps-smmu handover of display context bank?
> That shouldn't change, the only thing that changes is that gpu-smmu
> becomes an mmu-500, whereas previously only apps-smmu was..
> 

The current logic picks one of:
1) is the compatible mentioned in qcom_smmu_impl_of_match[]
2) is the compatible an adreno
3) no quirks needed

The change flips the order of these, so the only way I can see this
change affecting things is if we expected a match on #2, but we got one
on #1.

Which implies that the instance that we want to act according to the
adreno impl was listed in qcom_smmu_impl_of_match[] - which either is
wrong, or there's a single instance that needs both behaviors.

(And I believe Jordan's answer confirms the latter - there's a single
SMMU instance that needs all them quirks at once)

Regards,
Bjorn
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Jordan Crouse]

On Fri, Feb 26, 2021 at 11:48:13AM -0700, Jordan Crouse wrote:
> On Fri, Feb 26, 2021 at 11:24:52AM -0600, Bjorn Andersson wrote:
> > On Fri 26 Feb 03:55 CST 2021, Sai Prakash Ranjan wrote:
> > 
> > > Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
> > > both implement "arm,mmu-500" in some QTI SoCs and to run through
> > > adreno smmu specific implementation such as enabling split pagetables
> > > support, we need to match the "qcom,adreno-smmu" compatible first
> > > before apss smmu or else we will be running apps smmu implementation
> > > for adreno smmu and the additional features for adreno smmu is never
> > > set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
> > > and adreno smmu implementing "arm,mmu-500", so the adreno smmu
> > > implementation is never reached because the current sequence checks
> > > for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
> > > specific impl and we never reach adreno smmu specific implementation.
> > > 
> > 
> > So you're saying that you have a single SMMU instance that's compatible
> > with both an entry in qcom_smmu_impl_of_match[] and "qcom,adreno-smmu"?
> > 
> > Per your proposed change we will pick the adreno ops _only_ for this
> > component, essentially disabling the non-Adreno quirks selected by the
> > qcom impl. As such keeping the non-adreno compatible in the
> > qcom_smmu_impl_init[] seems to only serve to obfuscate the situation.
> > 
> > Don't we somehow need the combined set of quirks? (At least if we're
> > running this with a standard UEFI based boot flow?)
> 
> We *do* need the combined set of quirks, so there has to be an adreno-smmu
> impelmentation that matches the "generic" implementation with a few extra
> function hooks added on. I'm not sure if there is a clever way to figure out how
> to meld the implementation hooks at runtime but the alternative is to just make
> sure that the adreno-smmu static struct calls the same quirks as its generic
> partner.

To clarify, the gpu-smmu doesn't strictly need the s2cr handoff or the cfg_probe
though it wouldn't hurt to have them since they would be essentially
passthroughs for the GPU. We do need to capture errata like the
sdm845_smmu500_reset which is already part of the upstream adreno
implementation.

I think the main takeaway is that if a new errata or quirk is added
for main mmu500 it needs to be considered for adreno-smmu too.

Jordan

> > > Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>
> > > Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> > > ---
> > >  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 12 +++++++++---
> > >  1 file changed, 9 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > > index bea3ee0dabc2..03f048aebb80 100644
> > > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> > > @@ -345,11 +345,17 @@ struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu)
> > >  {
> > >  	const struct device_node *np = smmu->dev->of_node;
> > >  
> > > -	if (of_match_node(qcom_smmu_impl_of_match, np))
> > > -		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> > > -
> > > +	/*
> > > +	 * Do not change this order of implementation, i.e., first adreno
> > > +	 * smmu impl and then apss smmu since we can have both implementing
> > > +	 * arm,mmu-500 in which case we will miss setting adreno smmu specific
> > > +	 * features if the order is changed.
> > > +	 */
> > >  	if (of_device_is_compatible(np, "qcom,adreno-smmu"))
> > >  		return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
> > >  
> > > +	if (of_match_node(qcom_smmu_impl_of_match, np))
> > > +		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> > > +
> > >  	return smmu;
> > >  }
> > > -- 
> > > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> > > of Code Aurora Forum, hosted by The Linux Foundation
> > > 
> > _______________________________________________
> > iommu mailing list
> > iommu@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/iommu
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Sai Prakash Ranjan]

Hi Bjorn,

On 2021-02-27 00:44, Bjorn Andersson wrote:
> On Fri 26 Feb 12:23 CST 2021, Rob Clark wrote:
> 
> 
> The current logic picks one of:
> 1) is the compatible mentioned in qcom_smmu_impl_of_match[]
> 2) is the compatible an adreno
> 3) no quirks needed
> 
> The change flips the order of these, so the only way I can see this
> change affecting things is if we expected a match on #2, but we got one
> on #1.
> 
> Which implies that the instance that we want to act according to the
> adreno impl was listed in qcom_smmu_impl_of_match[] - which either is
> wrong, or there's a single instance that needs both behaviors.
> 
> (And I believe Jordan's answer confirms the latter - there's a single
> SMMU instance that needs all them quirks at once)
> 

Let me go through the problem statement in case my commit message wasn't
clear. There are two SMMUs (APSS and GPU) on SC7280 and both are SMMU500
(ARM SMMU IP).

APSS SMMU compatible - ("qcom,sc7280-smmu-500", "arm,mmu-500")
GPU SMMU compatible - ("qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500")

Now if we take SC7180 as an example, GPU SMMU was QSMMU(QCOM SMMU IP)
and APSS SMMU was SMMU500(ARM SMMU IP).

APSS SMMU compatible - ("qcom,sc7180-smmu-500", "arm,mmu-500")
GPU SMMU compatible - ("qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2")

Current code sequence without this patch,

if (of_match_node(qcom_smmu_impl_of_match, np))
                 return qcom_smmu_create(smmu, &qcom_smmu_impl);

if (of_device_is_compatible(np, "qcom,adreno-smmu"))
        return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);

Now if we look at the compatible for SC7180, there is no problem because
the APSS SMMU will match the one in qcom_smmu_impl_of_match[] and GPU SMMU
will match "qcom,adreno-smmu" because the compatible strings are different.
But for SC7280, both the APSS SMMU and GPU SMMU compatible("qcom,sc7280-smmu-500")
are same. So GPU SMMU will match with the one in qcom_smmu_impl_of_match[]
i.e.., "qcom,sc7280-smmu-500" which functionally doesn't cause any problem
but we will miss settings for split pagetables which are part of GPU SMMU
specific implementation.

We can avoid this with yet another new compatible for GPU SMMU something like
"qcom,sc7280-adreno-smmu-500" but since we can handle this easily in the
driver and since the IPs are same, meaning if there was a hardware quirk
required, then we would need to apply to both of them and would this additional
compatible be of any help?

Coming to the part of quirks now, you are right saying both SMMUs will need
to have the same quirks in SC7280 and similar others where both are based on
same IPs but those should probably be *hardware quirks* and if they are
software based like the S2CR quirk depending on the firmware, then it might
not be applicable to both. In case if it is applicable, then as Jordan mentioned,
we can add the same quirks in GPU SMMU implementation.

Thanks,
Sai

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Bjorn Andersson]

On Sat 27 Feb 07:53 CST 2021, Sai Prakash Ranjan wrote:

> Hi Bjorn,
> 
> On 2021-02-27 00:44, Bjorn Andersson wrote:
> > On Fri 26 Feb 12:23 CST 2021, Rob Clark wrote:
> > 
> > 
> > The current logic picks one of:
> > 1) is the compatible mentioned in qcom_smmu_impl_of_match[]
> > 2) is the compatible an adreno
> > 3) no quirks needed
> > 
> > The change flips the order of these, so the only way I can see this
> > change affecting things is if we expected a match on #2, but we got one
> > on #1.
> > 
> > Which implies that the instance that we want to act according to the
> > adreno impl was listed in qcom_smmu_impl_of_match[] - which either is
> > wrong, or there's a single instance that needs both behaviors.
> > 
> > (And I believe Jordan's answer confirms the latter - there's a single
> > SMMU instance that needs all them quirks at once)
> > 
> 
> Let me go through the problem statement in case my commit message wasn't
> clear. There are two SMMUs (APSS and GPU) on SC7280 and both are SMMU500
> (ARM SMMU IP).
> 
> APSS SMMU compatible - ("qcom,sc7280-smmu-500", "arm,mmu-500")
> GPU SMMU compatible - ("qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500")
> 
> Now if we take SC7180 as an example, GPU SMMU was QSMMU(QCOM SMMU IP)
> and APSS SMMU was SMMU500(ARM SMMU IP).
> 
> APSS SMMU compatible - ("qcom,sc7180-smmu-500", "arm,mmu-500")
> GPU SMMU compatible - ("qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2")
> 
> Current code sequence without this patch,
> 
> if (of_match_node(qcom_smmu_impl_of_match, np))
>                  return qcom_smmu_create(smmu, &qcom_smmu_impl);
> 
> if (of_device_is_compatible(np, "qcom,adreno-smmu"))
>         return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
> 
> Now if we look at the compatible for SC7180, there is no problem because
> the APSS SMMU will match the one in qcom_smmu_impl_of_match[] and GPU SMMU
> will match "qcom,adreno-smmu" because the compatible strings are different.
> But for SC7280, both the APSS SMMU and GPU SMMU compatible("qcom,sc7280-smmu-500")
> are same. So GPU SMMU will match with the one in qcom_smmu_impl_of_match[]
> i.e.., "qcom,sc7280-smmu-500" which functionally doesn't cause any problem
> but we will miss settings for split pagetables which are part of GPU SMMU
> specific implementation.
> 
> We can avoid this with yet another new compatible for GPU SMMU something like
> "qcom,sc7280-adreno-smmu-500" but since we can handle this easily in the
> driver and since the IPs are same, meaning if there was a hardware quirk
> required, then we would need to apply to both of them and would this additional
> compatible be of any help?
> 

No, I think you're doing the right thing of having them both. I just
didn't remember us doing that.

> Coming to the part of quirks now, you are right saying both SMMUs will need
> to have the same quirks in SC7280 and similar others where both are based on
> same IPs but those should probably be *hardware quirks* and if they are
> software based like the S2CR quirk depending on the firmware, then it might
> not be applicable to both. In case if it is applicable, then as Jordan mentioned,
> we can add the same quirks in GPU SMMU implementation.
> 

I do suspect that at some point (probably sooner than later) we'd have
to support both inheriting of stream from the bootloader and the Adreno
"quirks" in the same instance.

But for now this is okay to me.

Regards,
Bjorn
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Sai Prakash Ranjan]

On 2021-03-12 04:59, Bjorn Andersson wrote:
> On Sat 27 Feb 07:53 CST 2021, Sai Prakash Ranjan wrote:
> 
>> Hi Bjorn,
>> 
>> On 2021-02-27 00:44, Bjorn Andersson wrote:
>> > On Fri 26 Feb 12:23 CST 2021, Rob Clark wrote:
>> >
>> >
>> > The current logic picks one of:
>> > 1) is the compatible mentioned in qcom_smmu_impl_of_match[]
>> > 2) is the compatible an adreno
>> > 3) no quirks needed
>> >
>> > The change flips the order of these, so the only way I can see this
>> > change affecting things is if we expected a match on #2, but we got one
>> > on #1.
>> >
>> > Which implies that the instance that we want to act according to the
>> > adreno impl was listed in qcom_smmu_impl_of_match[] - which either is
>> > wrong, or there's a single instance that needs both behaviors.
>> >
>> > (And I believe Jordan's answer confirms the latter - there's a single
>> > SMMU instance that needs all them quirks at once)
>> >
>> 
>> Let me go through the problem statement in case my commit message 
>> wasn't
>> clear. There are two SMMUs (APSS and GPU) on SC7280 and both are 
>> SMMU500
>> (ARM SMMU IP).
>> 
>> APSS SMMU compatible - ("qcom,sc7280-smmu-500", "arm,mmu-500")
>> GPU SMMU compatible - ("qcom,sc7280-smmu-500", "qcom,adreno-smmu", 
>> "arm,mmu-500")
>> 
>> Now if we take SC7180 as an example, GPU SMMU was QSMMU(QCOM SMMU IP)
>> and APSS SMMU was SMMU500(ARM SMMU IP).
>> 
>> APSS SMMU compatible - ("qcom,sc7180-smmu-500", "arm,mmu-500")
>> GPU SMMU compatible - ("qcom,sc7180-smmu-v2", "qcom,adreno-smmu", 
>> "qcom,smmu-v2")
>> 
>> Current code sequence without this patch,
>> 
>> if (of_match_node(qcom_smmu_impl_of_match, np))
>>                  return qcom_smmu_create(smmu, &qcom_smmu_impl);
>> 
>> if (of_device_is_compatible(np, "qcom,adreno-smmu"))
>>         return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
>> 
>> Now if we look at the compatible for SC7180, there is no problem 
>> because
>> the APSS SMMU will match the one in qcom_smmu_impl_of_match[] and GPU 
>> SMMU
>> will match "qcom,adreno-smmu" because the compatible strings are 
>> different.
>> But for SC7280, both the APSS SMMU and GPU SMMU 
>> compatible("qcom,sc7280-smmu-500")
>> are same. So GPU SMMU will match with the one in 
>> qcom_smmu_impl_of_match[]
>> i.e.., "qcom,sc7280-smmu-500" which functionally doesn't cause any 
>> problem
>> but we will miss settings for split pagetables which are part of GPU 
>> SMMU
>> specific implementation.
>> 
>> We can avoid this with yet another new compatible for GPU SMMU 
>> something like
>> "qcom,sc7280-adreno-smmu-500" but since we can handle this easily in 
>> the
>> driver and since the IPs are same, meaning if there was a hardware 
>> quirk
>> required, then we would need to apply to both of them and would this 
>> additional
>> compatible be of any help?
>> 
> 
> No, I think you're doing the right thing of having them both. I just
> didn't remember us doing that.
> 
>> Coming to the part of quirks now, you are right saying both SMMUs will 
>> need
>> to have the same quirks in SC7280 and similar others where both are 
>> based on
>> same IPs but those should probably be *hardware quirks* and if they 
>> are
>> software based like the S2CR quirk depending on the firmware, then it 
>> might
>> not be applicable to both. In case if it is applicable, then as Jordan 
>> mentioned,
>> we can add the same quirks in GPU SMMU implementation.
>> 
> 
> I do suspect that at some point (probably sooner than later) we'd have
> to support both inheriting of stream from the bootloader and the Adreno
> "quirks" in the same instance.
> 
> But for now this is okay to me.
> 

Sure, let me know if you or anyone face any issues without it and I will
add it. I will resend this series with the dt-bindings patch for sc7280 
smmu
which wasn't cc'd to smmu folks by mistake.

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Sai Prakash Ranjan]

Hi Will,

On 2021-03-15 00:31, Sai Prakash Ranjan wrote:
> On 2021-03-12 04:59, Bjorn Andersson wrote:
>> On Sat 27 Feb 07:53 CST 2021, Sai Prakash Ranjan wrote:
>> 
>>> Hi Bjorn,
>>> 
>>> On 2021-02-27 00:44, Bjorn Andersson wrote:
>>> > On Fri 26 Feb 12:23 CST 2021, Rob Clark wrote:
>>> >
>>> >
>>> > The current logic picks one of:
>>> > 1) is the compatible mentioned in qcom_smmu_impl_of_match[]
>>> > 2) is the compatible an adreno
>>> > 3) no quirks needed
>>> >
>>> > The change flips the order of these, so the only way I can see this
>>> > change affecting things is if we expected a match on #2, but we got one
>>> > on #1.
>>> >
>>> > Which implies that the instance that we want to act according to the
>>> > adreno impl was listed in qcom_smmu_impl_of_match[] - which either is
>>> > wrong, or there's a single instance that needs both behaviors.
>>> >
>>> > (And I believe Jordan's answer confirms the latter - there's a single
>>> > SMMU instance that needs all them quirks at once)
>>> >
>>> 
>>> Let me go through the problem statement in case my commit message 
>>> wasn't
>>> clear. There are two SMMUs (APSS and GPU) on SC7280 and both are 
>>> SMMU500
>>> (ARM SMMU IP).
>>> 
>>> APSS SMMU compatible - ("qcom,sc7280-smmu-500", "arm,mmu-500")
>>> GPU SMMU compatible - ("qcom,sc7280-smmu-500", "qcom,adreno-smmu", 
>>> "arm,mmu-500")
>>> 
>>> Now if we take SC7180 as an example, GPU SMMU was QSMMU(QCOM SMMU IP)
>>> and APSS SMMU was SMMU500(ARM SMMU IP).
>>> 
>>> APSS SMMU compatible - ("qcom,sc7180-smmu-500", "arm,mmu-500")
>>> GPU SMMU compatible - ("qcom,sc7180-smmu-v2", "qcom,adreno-smmu", 
>>> "qcom,smmu-v2")
>>> 
>>> Current code sequence without this patch,
>>> 
>>> if (of_match_node(qcom_smmu_impl_of_match, np))
>>>                  return qcom_smmu_create(smmu, &qcom_smmu_impl);
>>> 
>>> if (of_device_is_compatible(np, "qcom,adreno-smmu"))
>>>         return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
>>> 
>>> Now if we look at the compatible for SC7180, there is no problem 
>>> because
>>> the APSS SMMU will match the one in qcom_smmu_impl_of_match[] and GPU 
>>> SMMU
>>> will match "qcom,adreno-smmu" because the compatible strings are 
>>> different.
>>> But for SC7280, both the APSS SMMU and GPU SMMU 
>>> compatible("qcom,sc7280-smmu-500")
>>> are same. So GPU SMMU will match with the one in 
>>> qcom_smmu_impl_of_match[]
>>> i.e.., "qcom,sc7280-smmu-500" which functionally doesn't cause any 
>>> problem
>>> but we will miss settings for split pagetables which are part of GPU 
>>> SMMU
>>> specific implementation.
>>> 
>>> We can avoid this with yet another new compatible for GPU SMMU 
>>> something like
>>> "qcom,sc7280-adreno-smmu-500" but since we can handle this easily in 
>>> the
>>> driver and since the IPs are same, meaning if there was a hardware 
>>> quirk
>>> required, then we would need to apply to both of them and would this 
>>> additional
>>> compatible be of any help?
>>> 
>> 
>> No, I think you're doing the right thing of having them both. I just
>> didn't remember us doing that.
>> 
>>> Coming to the part of quirks now, you are right saying both SMMUs 
>>> will need
>>> to have the same quirks in SC7280 and similar others where both are 
>>> based on
>>> same IPs but those should probably be *hardware quirks* and if they 
>>> are
>>> software based like the S2CR quirk depending on the firmware, then it 
>>> might
>>> not be applicable to both. In case if it is applicable, then as 
>>> Jordan mentioned,
>>> we can add the same quirks in GPU SMMU implementation.
>>> 
>> 
>> I do suspect that at some point (probably sooner than later) we'd have
>> to support both inheriting of stream from the bootloader and the 
>> Adreno
>> "quirks" in the same instance.
>> 
>> But for now this is okay to me.
>> 
> 
> Sure, let me know if you or anyone face any issues without it and I 
> will
> add it. I will resend this series with the dt-bindings patch for sc7280 
> smmu
> which wasn't cc'd to smmu folks by mistake.
> 

I think there is consensus on this series. I can resend if required but 
it
still applies cleanly, let me know if you have any comments?

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Will Deacon]

On Thu, Mar 25, 2021 at 01:10:12PM +0530, Sai Prakash Ranjan wrote:
> On 2021-03-15 00:31, Sai Prakash Ranjan wrote:
> > On 2021-03-12 04:59, Bjorn Andersson wrote:
> > > On Sat 27 Feb 07:53 CST 2021, Sai Prakash Ranjan wrote:
> > > > On 2021-02-27 00:44, Bjorn Andersson wrote:
> > > > > On Fri 26 Feb 12:23 CST 2021, Rob Clark wrote:
> > > > >
> > > > >
> > > > > The current logic picks one of:
> > > > > 1) is the compatible mentioned in qcom_smmu_impl_of_match[]
> > > > > 2) is the compatible an adreno
> > > > > 3) no quirks needed
> > > > >
> > > > > The change flips the order of these, so the only way I can see this
> > > > > change affecting things is if we expected a match on #2, but we got one
> > > > > on #1.
> > > > >
> > > > > Which implies that the instance that we want to act according to the
> > > > > adreno impl was listed in qcom_smmu_impl_of_match[] - which either is
> > > > > wrong, or there's a single instance that needs both behaviors.
> > > > >
> > > > > (And I believe Jordan's answer confirms the latter - there's a single
> > > > > SMMU instance that needs all them quirks at once)
> > > > >
> > > > 
> > > > Let me go through the problem statement in case my commit
> > > > message wasn't
> > > > clear. There are two SMMUs (APSS and GPU) on SC7280 and both are
> > > > SMMU500
> > > > (ARM SMMU IP).
> > > > 
> > > > APSS SMMU compatible - ("qcom,sc7280-smmu-500", "arm,mmu-500")
> > > > GPU SMMU compatible - ("qcom,sc7280-smmu-500",
> > > > "qcom,adreno-smmu", "arm,mmu-500")
> > > > 
> > > > Now if we take SC7180 as an example, GPU SMMU was QSMMU(QCOM SMMU IP)
> > > > and APSS SMMU was SMMU500(ARM SMMU IP).
> > > > 
> > > > APSS SMMU compatible - ("qcom,sc7180-smmu-500", "arm,mmu-500")
> > > > GPU SMMU compatible - ("qcom,sc7180-smmu-v2",
> > > > "qcom,adreno-smmu", "qcom,smmu-v2")
> > > > 
> > > > Current code sequence without this patch,
> > > > 
> > > > if (of_match_node(qcom_smmu_impl_of_match, np))
> > > >                  return qcom_smmu_create(smmu, &qcom_smmu_impl);
> > > > 
> > > > if (of_device_is_compatible(np, "qcom,adreno-smmu"))
> > > >         return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
> > > > 
> > > > Now if we look at the compatible for SC7180, there is no problem
> > > > because
> > > > the APSS SMMU will match the one in qcom_smmu_impl_of_match[]
> > > > and GPU SMMU
> > > > will match "qcom,adreno-smmu" because the compatible strings are
> > > > different.
> > > > But for SC7280, both the APSS SMMU and GPU SMMU
> > > > compatible("qcom,sc7280-smmu-500")
> > > > are same. So GPU SMMU will match with the one in
> > > > qcom_smmu_impl_of_match[]
> > > > i.e.., "qcom,sc7280-smmu-500" which functionally doesn't cause
> > > > any problem
> > > > but we will miss settings for split pagetables which are part of
> > > > GPU SMMU
> > > > specific implementation.
> > > > 
> > > > We can avoid this with yet another new compatible for GPU SMMU
> > > > something like
> > > > "qcom,sc7280-adreno-smmu-500" but since we can handle this
> > > > easily in the
> > > > driver and since the IPs are same, meaning if there was a
> > > > hardware quirk
> > > > required, then we would need to apply to both of them and would
> > > > this additional
> > > > compatible be of any help?
> > > > 
> > > 
> > > No, I think you're doing the right thing of having them both. I just
> > > didn't remember us doing that.
> > > 
> > > > Coming to the part of quirks now, you are right saying both
> > > > SMMUs will need
> > > > to have the same quirks in SC7280 and similar others where both
> > > > are based on
> > > > same IPs but those should probably be *hardware quirks* and if
> > > > they are
> > > > software based like the S2CR quirk depending on the firmware,
> > > > then it might
> > > > not be applicable to both. In case if it is applicable, then as
> > > > Jordan mentioned,
> > > > we can add the same quirks in GPU SMMU implementation.
> > > > 
> > > 
> > > I do suspect that at some point (probably sooner than later) we'd have
> > > to support both inheriting of stream from the bootloader and the
> > > Adreno
> > > "quirks" in the same instance.
> > > 
> > > But for now this is okay to me.
> > > 
> > 
> > Sure, let me know if you or anyone face any issues without it and I will
> > add it. I will resend this series with the dt-bindings patch for sc7280
> > smmu
> > which wasn't cc'd to smmu folks by mistake.
> > 
> 
> I think there is consensus on this series. I can resend if required but it
> still applies cleanly, let me know if you have any comments?

Please resend with the bindings patch, and I'd like Bjorn's Ack as well.

Will
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Sai Prakash Ranjan]

Hi Bjorn,

On 2021-03-25 20:35, Will Deacon wrote:
> On Thu, Mar 25, 2021 at 01:10:12PM +0530, Sai Prakash Ranjan wrote:

<snip>...

>> 
>> I think there is consensus on this series. I can resend if required 
>> but it
>> still applies cleanly, let me know if you have any comments?
> 
> Please resend with the bindings patch, and I'd like Bjorn's Ack as 
> well.
> 

Can we have your review/ack in case there is nothing pending here?

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Sai Prakash Ranjan]

On 2021-04-05 14:12, Sai Prakash Ranjan wrote:
> Hi Bjorn,
> 
> On 2021-03-25 20:35, Will Deacon wrote:
>> On Thu, Mar 25, 2021 at 01:10:12PM +0530, Sai Prakash Ranjan wrote:
> 
> <snip>...
> 
>>> 
>>> I think there is consensus on this series. I can resend if required 
>>> but it
>>> still applies cleanly, let me know if you have any comments?
>> 
>> Please resend with the bindings patch, and I'd like Bjorn's Ack as 
>> well.
>> 
> 
> Can we have your review/ack in case there is nothing pending here?
> 

Gentle Ping!

Thanks,
Sai

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Bjorn Andersson]

On Fri 26 Feb 03:55 CST 2021, Sai Prakash Ranjan wrote:

> Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
> both implement "arm,mmu-500" in some QTI SoCs and to run through
> adreno smmu specific implementation such as enabling split pagetables
> support, we need to match the "qcom,adreno-smmu" compatible first
> before apss smmu or else we will be running apps smmu implementation
> for adreno smmu and the additional features for adreno smmu is never
> set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
> and adreno smmu implementing "arm,mmu-500", so the adreno smmu
> implementation is never reached because the current sequence checks
> for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
> specific impl and we never reach adreno smmu specific implementation.
> 
> Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>

Sorry for taking my time thinking about this.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index bea3ee0dabc2..03f048aebb80 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -345,11 +345,17 @@ struct arm_smmu_device *qcom_smmu_impl_init(struct arm_smmu_device *smmu)
>  {
>  	const struct device_node *np = smmu->dev->of_node;
>  
> -	if (of_match_node(qcom_smmu_impl_of_match, np))
> -		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> -
> +	/*
> +	 * Do not change this order of implementation, i.e., first adreno
> +	 * smmu impl and then apss smmu since we can have both implementing
> +	 * arm,mmu-500 in which case we will miss setting adreno smmu specific
> +	 * features if the order is changed.
> +	 */
>  	if (of_device_is_compatible(np, "qcom,adreno-smmu"))
>  		return qcom_smmu_create(smmu, &qcom_adreno_smmu_impl);
>  
> +	if (of_match_node(qcom_smmu_impl_of_match, np))
> +		return qcom_smmu_create(smmu, &qcom_smmu_impl);
> +
>  	return smmu;
>  }
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
> 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Re: [PATCHv2 2/2] iommu/arm-smmu-qcom: Move the adreno smmu specific impl earlier

[Sai Prakash Ranjan]

On 2021-04-19 20:08, Bjorn Andersson wrote:
> On Fri 26 Feb 03:55 CST 2021, Sai Prakash Ranjan wrote:
> 
>> Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
>> both implement "arm,mmu-500" in some QTI SoCs and to run through
>> adreno smmu specific implementation such as enabling split pagetables
>> support, we need to match the "qcom,adreno-smmu" compatible first
>> before apss smmu or else we will be running apps smmu implementation
>> for adreno smmu and the additional features for adreno smmu is never
>> set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
>> and adreno smmu implementing "arm,mmu-500", so the adreno smmu
>> implementation is never reached because the current sequence checks
>> for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
>> specific impl and we never reach adreno smmu specific implementation.
>> 
>> Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>
>> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> 
> Sorry for taking my time thinking about this.
> 
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> 

No worries, thanks Bjorn.

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu