* [PATCH] iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses
@ 2021-09-03 19:37 Bjorn Helgaas
2021-09-22 5:48 ` Lu Baolu
0 siblings, 1 reply; 2+ messages in thread
From: Bjorn Helgaas @ 2021-09-03 19:37 UTC (permalink / raw)
To: Joerg Roedel; +Cc: Bjorn Helgaas, iommu, Will Deacon, linux-kernel
From: Bjorn Helgaas <bhelgaas@google.com>
719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") changed
the DMA fault reason from hex to decimal. It also added "0x" prefixes to
the PCI bus/device, e.g.,
- DMAR: [INTR-REMAP] Request device [00:00.5]
+ DMAR: [INTR-REMAP] Request device [0x00:0x00.5]
These no longer match dev_printk() and other similar messages in
dmar_match_pci_path() and dmar_acpi_insert_dev_scope().
Drop the "0x" prefixes from the bus and device addresses.
Fixes: 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/iommu/intel/dmar.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index d66f79acd14d..8647a355dad0 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1944,18 +1944,18 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type,
reason = dmar_get_fault_reason(fault_reason, &fault_type);
if (fault_type == INTR_REMAP)
- pr_err("[INTR-REMAP] Request device [0x%02x:0x%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n",
+ pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n",
source_id >> 8, PCI_SLOT(source_id & 0xFF),
PCI_FUNC(source_id & 0xFF), addr >> 48,
fault_reason, reason);
else if (pasid == INVALID_IOASID)
- pr_err("[%s NO_PASID] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
+ pr_err("[%s NO_PASID] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
type ? "DMA Read" : "DMA Write",
source_id >> 8, PCI_SLOT(source_id & 0xFF),
PCI_FUNC(source_id & 0xFF), addr,
fault_reason, reason);
else
- pr_err("[%s PASID 0x%x] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
+ pr_err("[%s PASID 0x%x] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
type ? "DMA Read" : "DMA Write", pasid,
source_id >> 8, PCI_SLOT(source_id & 0xFF),
PCI_FUNC(source_id & 0xFF), addr,
--
2.25.1
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses
2021-09-03 19:37 [PATCH] iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses Bjorn Helgaas
@ 2021-09-22 5:48 ` Lu Baolu
0 siblings, 0 replies; 2+ messages in thread
From: Lu Baolu @ 2021-09-22 5:48 UTC (permalink / raw)
To: Bjorn Helgaas, Joerg Roedel
Cc: Bjorn Helgaas, iommu, Will Deacon, linux-kernel
Hi Bjorn,
On 9/4/21 3:37 AM, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
>
> 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") changed
> the DMA fault reason from hex to decimal. It also added "0x" prefixes to
> the PCI bus/device, e.g.,
>
> - DMAR: [INTR-REMAP] Request device [00:00.5]
> + DMAR: [INTR-REMAP] Request device [0x00:0x00.5]
>
> These no longer match dev_printk() and other similar messages in
> dmar_match_pci_path() and dmar_acpi_insert_dev_scope().
>
> Drop the "0x" prefixes from the bus and device addresses.
>
> Fixes: 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault")
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Thank you for this fix. I have queued it for v5.15.
Best regards,
baolu
> ---
> drivers/iommu/intel/dmar.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
> index d66f79acd14d..8647a355dad0 100644
> --- a/drivers/iommu/intel/dmar.c
> +++ b/drivers/iommu/intel/dmar.c
> @@ -1944,18 +1944,18 @@ static int dmar_fault_do_one(struct intel_iommu *iommu, int type,
> reason = dmar_get_fault_reason(fault_reason, &fault_type);
>
> if (fault_type == INTR_REMAP)
> - pr_err("[INTR-REMAP] Request device [0x%02x:0x%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n",
> + pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n",
> source_id >> 8, PCI_SLOT(source_id & 0xFF),
> PCI_FUNC(source_id & 0xFF), addr >> 48,
> fault_reason, reason);
> else if (pasid == INVALID_IOASID)
> - pr_err("[%s NO_PASID] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
> + pr_err("[%s NO_PASID] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
> type ? "DMA Read" : "DMA Write",
> source_id >> 8, PCI_SLOT(source_id & 0xFF),
> PCI_FUNC(source_id & 0xFF), addr,
> fault_reason, reason);
> else
> - pr_err("[%s PASID 0x%x] Request device [0x%02x:0x%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
> + pr_err("[%s PASID 0x%x] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",
> type ? "DMA Read" : "DMA Write", pasid,
> source_id >> 8, PCI_SLOT(source_id & 0xFF),
> PCI_FUNC(source_id & 0xFF), addr,
>
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-09-22 5:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-03 19:37 [PATCH] iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses Bjorn Helgaas
2021-09-22 5:48 ` Lu Baolu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).