linux-kbuild.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Masahiro Yamada <masahiroy@kernel.org>
To: Nicolas Schier <nicolas@fjasle.eu>
Cc: linux-kbuild@vger.kernel.org, linux-kernel@vger.kernel.org,
	Nathan Chancellor <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>
Subject: Re: [PATCH 3/8] kbuild: move depmod rule to scripts/Makefile.modinst
Date: Sat, 26 Aug 2023 22:50:02 +0900	[thread overview]
Message-ID: <CAK7LNASK9cHsf2qPpFKzQ+dMyucF9xR7V2xd3HwLeffmEJn+og@mail.gmail.com> (raw)
In-Reply-To: <ZOZjq4dl0hthWaVT@bergen.fjasle.eu>

On Thu, Aug 24, 2023 at 8:30 AM Nicolas Schier <nicolas@fjasle.eu> wrote:
>
> On Wed 23 Aug 2023 20:50:43 GMT, Masahiro Yamada wrote:
> > depmod is a part of the module installation.
> >
> > scripts/Makefile.modinst is a better place to run it.
> >
> > Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> > ---
> >
> >  Makefile                 |  8 --------
> >  scripts/Makefile.modinst |  9 +++++++++
> >  scripts/depmod.sh        | 10 ++++++----
> >  3 files changed, 15 insertions(+), 12 deletions(-)
> >
> > diff --git a/Makefile b/Makefile
> > index e2dfa3b994f7..c9c8019e4720 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -509,7 +509,6 @@ LEX               = flex
> >  YACC         = bison
> >  AWK          = awk
> >  INSTALLKERNEL  := installkernel
> > -DEPMOD               = depmod
> >  PERL         = perl
> >  PYTHON3              = python3
> >  CHECK                = sparse
> > @@ -1871,15 +1870,8 @@ PHONY += modules_check
> >  modules_check: $(MODORDER)
> >       $(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $<
> >
> > -quiet_cmd_depmod = DEPMOD  $(MODLIB)
> > -      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
> > -                   $(KERNELRELEASE)
> > -
> >  modules_install:
> >       $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
> > -ifndef modules_sign_only
> > -     $(call cmd,depmod)
> > -endif
> >
> >  else # CONFIG_MODULES
> >
> > diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst
> > index ab0c5bd1a60f..7a64ece9b826 100644
> > --- a/scripts/Makefile.modinst
> > +++ b/scripts/Makefile.modinst
> > @@ -86,6 +86,15 @@ $(dst)/%.ko: $(extmod_prefix)%.ko FORCE
> >       $(call cmd,strip)
> >       $(call cmd,sign)
> >
> > +__modinst: depmod
> > +
> > +PHONY += depmod
> > +depmod: $(modules)
> > +     $(call cmd,depmod)
> > +
> > +quiet_cmd_depmod = DEPMOD  $(MODLIB)
> > +      cmd_depmod = $(srctree)/scripts/depmod.sh $(KERNELRELEASE)
>
> Did you remove the $(CONFIG_SHELL) by intention?


Yes.
I do not know why $(CONFIG_SHELL) is needed.

I remove $(CONFIG_SHELL) when I have a chance to touch the line.


> > +
> >  else
> >
> >  $(dst)/%.ko: FORCE
> > diff --git a/scripts/depmod.sh b/scripts/depmod.sh
> > index fca689ba4f21..ee771ccb1f9c 100755
> > --- a/scripts/depmod.sh
> > +++ b/scripts/depmod.sh
> > @@ -3,12 +3,14 @@
> >  #
> >  # A depmod wrapper used by the toplevel Makefile
>
> toplevel Makefile -> scripts/Makefile.modinst


Good catch.
I will fix it.


> >
> > -if test $# -ne 2; then
> > -     echo "Usage: $0 /sbin/depmod <kernelrelease>" >&2
> > +if test $# -ne 1; then
> > +     echo "Usage: $0 <kernelrelease>" >&2
> >       exit 1
> >  fi
> > -DEPMOD=$1
> > -KERNELRELEASE=$2
> > +
> > +KERNELRELEASE=$1
> > +
> > +: ${DEPMOD:=depmod}
> >
> >  if ! test -r System.map ; then
> >       echo "Warning: modules_install: missing 'System.map' file. Skipping depmod." >&2
> > --
> > 2.39.2
>
> A minor observation: with this patch, the "quiet_cmd_*" examples in
> Makefile and in Documentation/kbuild/makefiles.rst become out-dated.


I was opposed to eb38f37c3cee08a0197bdc7bbb9b4e02e40e2300

The section "Script invocation" is not what I ack'ed.

That is what Kees Cook and Andrew Morton did.









>
> But technically, it looks good to me, thus:
> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>



--
Best Regards
Masahiro Yamada

  reply	other threads:[~2023-08-26 13:51 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-23 11:50 [PATCH 1/8] kbuild: do not run depmod for 'make modules_sign' Masahiro Yamada
2023-08-23 11:50 ` [PATCH 2/8] kbuild: add modules_sign to no-{compiler,sync-config}-targets Masahiro Yamada
2023-08-23 19:53   ` Nicolas Schier
2023-08-23 11:50 ` [PATCH 3/8] kbuild: move depmod rule to scripts/Makefile.modinst Masahiro Yamada
2023-08-23 19:53   ` Nicolas Schier
2023-08-26 13:50     ` Masahiro Yamada [this message]
2023-08-23 11:50 ` [PATCH 4/8] kbuild: remove $(MODLIB)/source symlink Masahiro Yamada
2023-08-23 20:17   ` Nicolas Schier
2023-08-23 11:50 ` [PATCH 5/8] kbuild: reduce the number of mkdir calls during modules_install Masahiro Yamada
2023-08-23 20:22   ` Nicolas Schier
2023-08-23 11:50 ` [PATCH 6/8] kbuild: move more module installation code to scripts/Makefile.modinst Masahiro Yamada
2023-08-28 14:25   ` Nicolas Schier
2023-08-29  2:35     ` Masahiro Yamada
2023-08-29  3:50       ` Nicolas Schier
2023-08-23 11:50 ` [PATCH 7/8] kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n Masahiro Yamada
2023-08-28 14:31   ` Nicolas Schier
2023-08-23 11:50 ` [PATCH 8/8] kbuild: support modules_sign for external modules as well Masahiro Yamada
2023-08-28 14:52   ` Nicolas Schier
2023-08-23 19:52 ` [PATCH 1/8] kbuild: do not run depmod for 'make modules_sign' Nicolas Schier
2023-08-26 13:36   ` Masahiro Yamada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAK7LNASK9cHsf2qPpFKzQ+dMyucF9xR7V2xd3HwLeffmEJn+og@mail.gmail.com \
    --to=masahiroy@kernel.org \
    --cc=linux-kbuild@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nathan@kernel.org \
    --cc=ndesaulniers@google.com \
    --cc=nicolas@fjasle.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).