linux-kernel-mentees.lists.linuxfoundation.org archive mirror
 help / color / mirror / Atom feed
From: Vaibhav Gupta <vaibhavgupta40@gmail.com>
To: Bjorn Helgaas <helgaas@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	bjorn@helgaas.com, Vaibhav Gupta <vaibhav.varodek@gmail.com>,
	"David S. Miller" <davem@davemloft.net>
Cc: linux-ide@vger.kernel.org,
	linux-kernel-mentees@lists.linuxfoundation.org,
	linux-kernel@vger.kernel.org,
	Vaibhav Gupta <vaibhavgupta40@gmail.com>
Subject: [Linux-kernel-mentees] [PATCH v2 2/4] ide: triflex: use generic power management
Date: Fri,  3 Jul 2020 13:44:26 +0530	[thread overview]
Message-ID: <20200703081428.1011527-3-vaibhavgupta40@gmail.com> (raw)
In-Reply-To: <20200703081428.1011527-1-vaibhavgupta40@gmail.com>

While upgrading ide_pci_suspend() and ide_pci_resume(), all other source
files, using same callbacks, were also updated except
drivers/ide/triflex.c. This is because the driver does not want to power
off the device during suspend. A quirk was required for the same.

This patch provides the fix. Another driver,
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c, makes use of
a quirk for similar goal. Hence a similar quirk has been applied for
triflex.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
---
 drivers/ide/triflex.c | 45 +++++++++++--------------------------------
 1 file changed, 11 insertions(+), 34 deletions(-)

diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 1886bbfb9e5d..f707f11c296d 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -100,48 +100,25 @@ static const struct pci_device_id triflex_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
 
-#ifdef CONFIG_PM
-static int triflex_ide_pci_suspend(struct pci_dev *dev, pm_message_t state)
-{
-	/*
-	 * We must not disable or powerdown the device.
-	 * APM bios refuses to suspend if IDE is not accessible.
-	 */
-	pci_save_state(dev);
-	return 0;
-}
-
-static int triflex_ide_pci_resume(struct pci_dev *dev)
+/*
+ * We must not disable or powerdown the device.
+ * APM bios refuses to suspend if IDE is not accessible.
+ */
+static void triflex_pci_pm_cap_fixup(struct pci_dev *pdev)
 {
-	struct ide_host *host = pci_get_drvdata(dev);
-	int rc;
-
-	pci_set_power_state(dev, PCI_D0);
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	pci_restore_state(dev);
-	pci_set_master(dev);
-
-	if (host->init_chipset)
-		host->init_chipset(dev);
-
-	return 0;
+	dev_info(&pdev->dev, "Disable triflex to be turned off by PCI CORE\n");
+	pdev->pm_cap = 0;
 }
-#else
-#define triflex_ide_pci_suspend NULL
-#define triflex_ide_pci_resume NULL
-#endif
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_COMPAQ,
+			PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
+			triflex_pci_pm_cap_fixup);
 
 static struct pci_driver triflex_pci_driver = {
 	.name		= "TRIFLEX_IDE",
 	.id_table	= triflex_pci_tbl,
 	.probe		= triflex_init_one,
 	.remove		= ide_pci_remove,
-	.suspend	= triflex_ide_pci_suspend,
-	.resume		= triflex_ide_pci_resume,
+	.driver.pm	= &ide_pci_pm_ops,
 };
 
 static int __init triflex_ide_init(void)
-- 
2.27.0

_______________________________________________
Linux-kernel-mentees mailing list
Linux-kernel-mentees@lists.linuxfoundation.org
https://lists.linuxfoundation.org/mailman/listinfo/linux-kernel-mentees

  parent reply	other threads:[~2020-07-03  8:16 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  8:14 [Linux-kernel-mentees] [PATCH v2 0/4] drivers: ide: use generic power management Vaibhav Gupta
2020-07-03  8:14 ` [Linux-kernel-mentees] [PATCH v2 1/4] " Vaibhav Gupta
2020-07-03  8:14 ` Vaibhav Gupta [this message]
2020-07-07 20:42   ` [Linux-kernel-mentees] [PATCH v2 2/4] ide: triflex: " Bjorn Helgaas
2020-07-07 20:49     ` Dhiraj Sharma
2020-07-07 20:53     ` Vaibhav Gupta
2020-07-07 21:15       ` Bjorn Helgaas
2020-07-03  8:14 ` [Linux-kernel-mentees] [PATCH v2 3/4] ide: sc1200: " Vaibhav Gupta
2020-07-03  8:14 ` [Linux-kernel-mentees] [PATCH v2 4/4] ide: delkin_cb: " Vaibhav Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703081428.1011527-3-vaibhavgupta40@gmail.com \
    --to=vaibhavgupta40@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=bjorn@helgaas.com \
    --cc=davem@davemloft.net \
    --cc=helgaas@kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel-mentees@lists.linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vaibhav.varodek@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).